SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4480-1
Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3629-3
Electrically pumped lasers with reduced physical dimensions are critical for future optical information processing, storage, and photonic integrated circuits. However, electrical injection in perovskite lasers faces challenges including material instability, non-radiative losses, and Joule heating. Here, we demonstrate an ultralow-threshold perovskite microlaser decorated with gold nanoparticles (AuNPs), enabling simultaneous optical pumping and current injection at ambient temperature. The lasing threshold is reduced to 8.6 μJ/cm², approximately 44% lower than that of pristine devices (15.3 μJ/cm²). The AuNPs, with optimized size, enhance both lasing performance and electrical properties, achieving a current injection density of 2.98 kA/cm². AuNPs accelerate hot-carrier cooling, reducing non-radiative recombination and mitigating Joule heating. The threshold decreases progressively with increasing electrical assist fraction. Stability tests confirm excellent resistance to aging and humidity, with stable lasing output under co-excitation in ambient air. This work underscores the feasibility of electrically driven perovskite microlasers, offering a pathway toward electrically pumped microlaser diodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3588-2
The rapid evolution of aerospace technology necessitates the development of multi-functional composites that combine light weight, mechanical robustness, thermal protection/insulation, and electromagnetic interference (EMI) shielding. C/SiC porous ceramic composites are promising for thermal protection in hypersonic vehicles. Here, we report a facile strategy to fabricate Cf/SiC composite polymer-derived ceramics (PDCs) via re-pyrolysis of high-energy ball-milled polycarbosilane-vinyltriethoxysilane-graphene oxide (PVG) with Cf/SiC(rGO)p blend interleaves. In-situ generated honeycomb-like cellular structures and non-directional channels reduce density and increase porosity. High-quality SiO2 joints, formed from Si-dangling bonds, strengthen interfacial bonding via a brazing effect, while in-situ SiOC nanowires (SiOCnws) create a hierarchically enhanced network, improving fracture toughness and crack resistance. Multi-scale interfacial/dipole polarization enhances EMI shielding. The optimized Cf(0.2)/SiC(rGO) composite exhibits low density (1.49 g cm−3), high fracture toughness (6.32 MPa m1/2), hardness (7.18 GPa), compressive strength (72.67 MPa), and EMI shielding effectiveness of 58.31 dB. It maintains structural stability under butane blowtorch ablation at ~1300 °C for 3600 s. Porous variants show thermal conductivity of 0.211 W m−1 K−1 with 69.74% porosity. These multi-functional composites are promising for thermal protection systems in aerospace applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3634-0
Messenger RNA-lipid nanoparticle (mRNA-LNP) vaccines have demonstrated extraordinary efficacy against severe acute respiratory syndrome coronavirus 2, establishing LNPs as the premier platform for mRNA therapeutics. However, the pervasive presence of anti-polyethylene glycol (PEG) antibodies undermines PEGylated LNP performance by diminishing therapeutic efficacy. To address this challenge, we synthesized a panel of lipid-poly(2-oxazoline) (lipid-POx) conjugates as alternatives to lipid-PEG and systematically evaluated how their polymer backbone, degree of polymerization, and lipid tail structure influence LNP physicochemical properties and mRNA delivery performance. Among POx-LNPs formulated with heptadecan-9-yl 8-((2-hydroxyethyl)(6-oxo-6-(undecyloxy)hexyl)amino)octanoate (SM-102) as the base lipid, those constructed with single-tailed C18-POx exhibited smaller particle sizes and superior freeze-thaw stability. These C18-POx-LNPs maintained comparable in vivo transfection efficiency to PEG-LNPs even when fully replacing 1,2-dimyristoyl-sn-glycero-3 (DMG)-PEG. Notably, in mice bearing pre-existing anti-PEG antibodies, C18-POx-LNPs demonstrated over 200-fold higher transfection efficiency than PEG-LNPs. Additionally, repeated administration of POx-LNPs induced dose-dependent anti-POx immunoglobulin M (IgM) and IgG responses, with antibody titers inversely correlated with POx hydrophilicity. This study underscores the effectiveness of substituting PEG with POx in LNP construction to address the transfection efficiency in populations with pre-existing anti-PEG antibodies, and would inspire the development of more hydrophilic polymers for LNP formulation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509001
To address low nitrogen removal efficiency in wastewater treatment plant (WWTP) effluent due to insufficient carbon sources and weak reoxygenation in conventional constructed wetlands (CWs), a tidal flow-subsurface flow integrated CW using iron-loaded biochar (BC-TF) as substrate was developed, with zeolite-based CW as control. Simulated wastewater experiments, water quality monitoring, nitrification/denitrification intensity assays, and high-throughput sequencing were employed. Results showed that tidal flow operation significantly enhanced removal of total nitrogen (TN) and ammonia nitrogen (NH4+-N), and increased nitrification intensity. Addition of iron-loaded biochar significantly improved TN and nitrate nitrogen (NO3−-N) removal, with BC-TF achieving an average TN removal of 86.03%, significantly higher than other groups (P<0.001). Microbial analysis revealed Proteobacteria, Actinobacteria, and Bacteroidetes as key phyla; iron-loaded biochar increased microbial abundance and diversity in tidal flow wetlands, while tidal flow alone reduced bacterial diversity. Pilot-scale experiments confirmed that tidal flow increased dissolved oxygen and nitrogen removal. This study is the first to combine iron-loaded biochar with tidal flow-subsurface flow CWs, systematically revealing the synergistic nitrogen removal mechanism of 'iron-loaded biochar-tidal flow-microorganisms', clarifying the role of iron-nitrogen coupling, and validating engineering applicability via pilot tests. The combination enhances reoxygenation, supplements carbon sources, and optimizes microbial community structure, effectively improving deep nitrogen purification of WWTP effluent, providing technical reference for tailwater treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4085-9
Bone defects remain a prevalent clinical challenge, and regenerative medicine based on bone tissue engineering offers promising solutions. Traditional osteogenic materials rely on bioactive macromolecules like growth factors, which suffer from poor stability and stringent storage requirements. From a structural perspective, bone tissue resides in a phosphorylated microenvironment, with 65–70% of inorganic components composed of hydroxyapatite. Inorganic phosphorylated materials induce osteogenic differentiation but exhibit high stiffness, brittleness, slow degradation, and limited mechanical tunability. Synthetic phosphorylated polymers with excellent mechanical properties and biocompatibility have been developed to address these issues. In this work, we developed a series of phosphorylated polymers derived from poly(glycerol sebacate) (PGS), a biocompatible and biodegradable material. Leveraging the hydroxyl-rich backbone of PGS, we demonstrated an efficient method for controllable phosphorylation of PGS side chains, enabling synthesis of PGS-based phosphorylated (PGS-P) polymers with tunable phosphorus contents. The optimized phosphorylated polyester, PGS-P4, exhibited strong ability to promote osteogenic differentiation of rat BMSCs, and its porous three-dimensional scaffolds showed favorable properties for bone regeneration. BMSCs cultured for one week and observed by fluorescence microscopy showed enhanced BSP protein expression on PGS-P2, PGS-P4, and PGS-P6 groups compared with PLGA and PGS, with PGS-P4 displaying the most intense signal. In summary, we present a simple and controllable method for preparation of functionalized polyesters and their porous scaffolds with tunable phosphorus content, validating its effectiveness in promoting osteogenic differentiation of rat BMSCs. All phosphorylated polyesters exhibit enhanced differentiation-promoting effects compared to non-phosphorylated PGS; however, the degree of enhancement does not increase monotonically with phosphorus content. PGS-P4, containing an optimal phosphorus level, shows the most pronounced biological functions.