SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4499-9
Two-dimensional (2D) ferroelectric materials have emerged as promising candidates for next-generation non-volatile memory and neuromorphic computing, yet their integration into commercial devices faces substantial hurdles. This review critically examines the structure, properties, and applications of ferroelectric 2D In-Se materials, with a focus on their potential to overcome the scaling and retention limitations of conventional ferroelectrics such as Hf0.5Zr0.5O2 (HZO). The manuscript synthesizes recent advances in In-Se ferroelectricity, including the mechanisms of polarization switching, modulation strategies, and device demonstrations. Key experimental benchmarks from the literature are analyzed, such as the high data retention and read endurance of 5-nm HZO ferroelectric FETs (IEEE Electron Device Lett, 2019, 40(3): 399-402) and the giant barrier height modulation in ferroelectric van der Waals heterojunctions (Nat Electron, 2020, 3: 466-472). The review also highlights the performance of sliding ferroelectric memories based on rhombohedral-stacked bilayer MoS2, which achieved non-volatile storage with low power consumption (Nat Commun, 2024, 15: 10796). Despite these advances, critical challenges remain: the scalability of In-Se synthesis, the control of domain dynamics at the nanoscale, and the cost parity with silicon-based technologies. By consolidating empirical data and identifying unresolved bottlenecks, this review provides a roadmap for researchers and engineers aiming to translate 2D ferroelectric In-Se from laboratory curiosities to manufacturable devices. The analysis underscores the need for standardized metrology and accelerated lifetime testing to validate industrial viability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4494-9
Superionic conductors exhibit high cation mobility arising from weak binding and continuous transport pathways, atomistically characterized by extensive structural disorder and partial occupancy akin to amorphization. This disorder, whether confined to a cation sublattice or extended to full amorphization, strongly impedes lattice thermal transport, rendering these materials intrinsically ideal thermal insulators. This work investigates Ag26I18W4O16, a superionic conductor tunable from fully amorphous to single-crystalline states, as a model system to probe the impact of disorder and amorphization on thermal transport. Extensive Ag+ disorder, in both crystalline and amorphous phases, reduces thermal conductivity to approximately the theoretical lower bound of 0.16 W/m-K with virtually no temperature dependence, while concurrently achieving the lowest mean sound velocity ever recorded for a dense solid. Pair distribution function (PDF) analysis of synchrotron X-ray total scattering data indicates that short-range disorder (< 5 Å), rather than long-range periodicity, governs thermal insulation performance in both phases. These findings suggest a design strategy reconciling structural stability with glass-like thermal insulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3809-y
The development of hydrogels that simultaneously achieve high strength and good toughness remains a critical challenge in soft material science, particularly for applications in flexible electronics, soft robotics, and biomedical devices. Conventional approaches often suffer from a trade-off between mechanical robustness and functional performance. In this work, we present a novel solvent-driven dual-network entanglement strategy to fabricate a strong and tough poly(vinyl alcohol) (PVA)-based organo-hydrogel by synergistically combining isopropanol (IPA) solvent substitution to induce dense polymer chain entanglement and a sodium alginate (SA) ionic crosslinked network as a dynamic energy-dissipation phase. The resulting organo-hydrogel exhibits excellent mechanical performance with a tensile strength of 3.18 MPa and a toughness of 16.65 MJ/m3, representing increases of approximately 17 and 49 times that of conventional PVA hydrogels, respectively. Furthermore, the organo-hydrogel displays superior swelling resistance and long-term stability in aqueous environments, enabling reliable operation in challenging conditions such as underwater motion sensing and wearable strain detection. Morphological analyses reveal the critical role of solvent-mediated chain reorganization and dual-network interactions in achieving these properties. This work not only provides a versatile platform for designing robust gel materials but also offers fundamental insights into solvent-network interactions for advanced soft material engineering.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608024
Microbial remediation is a widely used technology for treating chromium pollution in groundwater. This study conducted a bibliometric analysis of 441 papers from the Web of Science Core Collection (2010–2024) using CiteSpace, VOSviewer, and Pajek. The publication trend increased over the period, with three developmental stages identified: early (2010–2016) focusing on basic treatment methods, intermediate (2017–2019) on intrinsic mechanisms, and recent (2020–2024) on process optimization. Biological adsorption and reduction were identified as the primary mechanisms. Correlation and principal component analyses of environmental factors (temperature, pH, initial Cr concentration, reaction time) revealed temperature as the key factor affecting remediation efficiency. The removal efficiencies and mechanisms of various dominant bacterial strains were summarized to guide strain selection. Future research should focus on microbial community synergy, nanomaterial integration, and environmental optimization to enhance remediation efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4109-2
The fabrication of high-efficiency organic solar cells (OSCs) under ambient conditions remains a formidable challenge due to the sensitivity of active layer morphology to environmental factors. We propose an innovative approach for air-processed devices that combines spontaneous water-spreading film formation with layer-by-layer (LBL) deposition. This method enables the fabrication of donor- and acceptor-dominant bulk heterojunction blend films near the anode and cathode interfacial layers, respectively, optimizing vertical phase separation and enhancing charge transfer efficiency. In the D18:L8-BO system, the device achieves a power conversion efficiency (PCE) of 19.02% with an exceptionally narrow efficiency distribution. Even for devices with an area of 1 cm2, a PCE of 16.56% is attained. After a 1000-hour decay test, the efficiency retains 84.1%. This novel method offers a promising pathway for advancing the industrial application of large-area, highly stable devices with narrow efficiency distribution under ambient conditions.