SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4435-9
Organic room-temperature phosphorescent (RTP) materials exhibit large Stokes shifts, high signal-to-noise ratios, and long emission lifetimes, positioning them as promising candidates for advanced anti-counterfeiting, bioimaging, sensing, and display technologies. Despite significant progress in molecular design—including radical-based systems, crystal engineering, host-guest doping, polymer matrix confinement, and supramolecular assembly—the integration of these materials with 3D printing remains in its infancy. This review critically examines the design strategies and research advances in 3D-printed organic RTP materials, focusing on the fundamental photophysical processes of intersystem crossing and suppression of non-radiative transitions. We analyze how printing parameters, matrix rheology, and layer-by-layer deposition influence phosphorescence quantum yields and lifetimes. Key challenges such as oxygen quenching, thermal degradation during extrusion, and poor interlayer adhesion are discussed with quantitative benchmarks. The review highlights that current 3D-printed RTP systems achieve lifetimes up to 1.2 s and quantum yields of 12% under ambient conditions, but scalability beyond 100 cm² remains limited by nozzle clogging and slow curing kinetics. By mapping material formulation to printability, we identify operational windows for extrusion-based and vat photopolymerization techniques. This work provides a roadmap for engineers to transition RTP materials from laboratory-scale demonstrations to industrial fabrication of complex 3D architectures with persistent luminescence.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4383-8
Conventional cancer therapies remain constrained by undruggable oncogenic proteins and acquired resistance. Proteolysis targeting chimeras (PROTACs) have emerged as a transformative modality that harnesses the ubiquitin-proteasome system to selectively degrade target proteins, offering advantages over traditional small-molecule inhibitors. However, clinical translation of PROTACs is impeded by intrinsic physicochemical limitations: high molecular weight, poor bioavailability, and lack of tumor-specific delivery. Integrating PROTACs with nanotechnology has yielded advanced nano-PROTACs platforms. Nanocarriers enhance solubility and stability, optimize pharmacokinetics, and enable spatiotemporally controlled drug release through passive or active targeting. This review systematically summarizes recent advances in engineering multifunctional nano-PROTACs for cancer therapy, with particular emphasis on design strategies by which nanoengineering enhances PROTAC performance. We evaluate how these platforms improve anticancer efficacy and minimize systemic toxicity while exploring their therapeutic potential in monotherapy and synergistic treatment settings. Finally, we discuss current challenges and future perspectives, providing a theoretical and technical foundation for next-generation nano-PROTACs as a precise and potent strategy in precision oncology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4405-9
Conventional metal-halide X-ray scintillators, including Bi4Ge3O12 (BGO), Cs(Na)I:Tl, and Lu1.8Y0.2SiO5:Ce (LYSO), suffer from hygroscopic decomposition, high-temperature fabrication, and mechanical rigidity, which restrict their deployment in harsh-environment radiography. This study reports a nontoxic zero-dimensional organic–inorganic hybrid copper(I) halide, Cu2I2(C26H36NP)2 (Compound G), synthesized via a room-temperature solution route. The bulky phosphine ligands confer exceptional superhydrophobicity, with the material retaining 91.95% of its initial luminescence after 30 days of water immersion. A flexible scintillator screen fabricated from styrene-ethylene-butene-styrene (SEBS) exhibits a light yield of ~32,500 photons MeV-1, a spatial resolution of 19.14 lp mm-1, and a detection limit of 0.8 μGyair s-1. The screen enables stable X-ray imaging under flexible, high-temperature, and underwater conditions, eliminating vignetting and distortion in nonplanar objects. These metrics demonstrate that the superhydrophobic copper(I) halide scintillator addresses the water-stability bottleneck of commercial scintillators while delivering competitive light output and resolution, offering a viable pathway for medical diagnosis, nondestructive inspection, security checking, and space exploration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3605-0
Nickel oxide (NiOx) is widely used as a hole transport material in inverted perovskite solar cells (PSCs). However, its practical application is limited by low intrinsic conductivity and insufficient hole extraction ability, leading to significant interfacial defects that reduce device efficiency and stability. To overcome these issues, two isomeric small organic molecules, 2,6-NOT and 1,5-NOT, were developed and introduced to modify NiOx. These isomers share the same structure but differ in the substitution positions of functional groups, resulting in distinct molecular planarity. Experimental results demonstrate that 1,5-NOT, featuring extended conjugation and enhanced planarity, more effectively enhances the hole extraction/transport capabilities and conductivity of NiOx compared to 2,6-NOT. The NiOx/1,5-NOT-based device achieves a remarkable power conversion efficiency (PCE) of 24.20%, along with excellent long-term stability, surpassing the NiOx control device (18.12%) and the 2,6-NOT-based device (21.87%). These findings indicate that modifying NiOx with small organic molecules significantly improves charge transport performance, and increasing molecular planarity is particularly beneficial for enhancing hole transport and reducing defect density, thereby increasing both efficiency and stability. This work provides a new strategy for NiOx modification via small organic molecules, offering a promising route to high-performance inverted PSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3585-1
Semiconductor-based surface-enhanced Raman scattering (SERS) substrates have attracted significant attention due to their high uniformity, reproducibility, stability, and cost-effectiveness. However, the Raman enhancement in semiconductors primarily relies on the chemical mechanism (CM), which typically results in a lower enhancement capability compared to traditional noble metals. In this study, we developed a novel two-dimensional (2D) SERS substrate, Ag2Te nanosheets (NSs), synthesized through a simple one-step redox reaction utilizing 2D Te NSs as the template. The 2D Ag2Te NSs not only exhibit strong interfacial interactions with molecules, thereby supporting the CM, but also possess quasi-metallic properties with low resistivity (2.8 × 10−4 Ω cm) and high density of free electrons (4.15 × 10^22 cm−3), giving rise to a significant visible-region surface plasmon resonance (SPR) band and contributing to enormous electromagnetic mechanism (EM). By synergizing CM and EM, the 2D Ag2Te NSs SERS substrate achieved an ultra-low limit of detection (LOD) of 10−10 M with an enhancement factor (EF) of 2.6 × 10^7 for methylene blue (MB), outperforming most semiconductors, even rivaling noble metals. The quasi-metallic properties of 2D Ag2Te NSs also benefit their sensitivity to multiple molecules. The accuracy and reliability were demonstrated in real-sample detections with recoveries of 91.5%–108.3% for various target molecules. These excellent performances, combined with remarkable cost-effectiveness, demonstrate the potential of 2D Ag2Te NSs as a practical SERS substrate with broad applicability. Furthermore, the inherent structural simplicity of these nanosheets creates significant opportunities for further sophisticated nanostructural engineering to advance the SERS performance in the future.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3669-1
Halide perovskite light-emitting diodes (PeLEDs) have advanced rapidly due to their high photoluminescence quantum yield, tunable bandgap, and color purity. However, conventional perovskites exhibit small exciton binding energies, which weaken radiative recombination and limit external quantum efficiency (EQE). Strong spatial confinement strategies, such as thin films, small grains, or quantum-confined structures, have boosted EQE beyond 20% but introduce Auger recombination and ion migration, causing efficiency roll-off and instability. This commentary highlights a novel approach by Xiao et al. (Nature, 2025) that employs weakly space-confined all-inorganic CsPbBr3 perovskites, synthesized using sacrificial additives hypophosphorous acid (HPA) and ammonium chloride (NH4Cl). This method yields highly oriented monocrystalline domains exceeding hundreds of nanometers with no observable grain boundaries, contrasting with control films (submicrometre grains with abundant boundaries) and strongly confined systems (~20 nm crystallites with organic ligands). The reduced grain boundaries lower defect density and block ion migration, while controlled crystallization suppresses vacancies and lattice distortions, enhancing carrier mobility and raising the ion migration energy barrier. The strategy achieves record-breaking performance and stability, addressing EQE roll-off and operational lifetime limitations. This approach offers a versatile framework for other all-inorganic perovskite systems, advancing PeLEDs toward practical high-brightness displays and lighting.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507021
The accumulation of heavy metals in soil around municipal solid waste landfills poses potential risks to human health. This study selected a municipal solid waste landfill and monitored the concentrations of eight heavy metals (Zn, Pb, Cd, Ni, Hg, Cu, As, Cr) in surrounding soil. The geo-accumulation index method was used for pollution assessment, and a health risk assessment model recommended by the USEPA, combined with Monte Carlo uncertainty analysis, was employed to evaluate the pollution status and health risks to nearby residents. Results showed that among the eight metals, Pb, Ni, and Cd exceeded risk screening values at 4.26%, 6.38%, and 4.26% of sampling points, respectively. Geo-accumulation indices indicated overall clean conditions (mean < 0), but slight pollution by Pb, Zn, Ni, Hg, and Cd at some points. Probabilistic risk assessment based on Monte Carlo simulation revealed that for both adults and children, the cumulative non-carcinogenic risk was negligible, while carcinogenic risk was acceptable. However, there was a very low probability (approximately 0.2%) of non-carcinogenic risk for children, and probabilities of unacceptable carcinogenic risk were 0.64% for adults and 3.21% for children. Nickel was the primary contributor to carcinogenic risk, and children faced higher health risks than adults. These findings provide a reference for pollution prevention and health risk management of soil around municipal solid waste landfills.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60600-1
The service life of refractory bricks in the slag tapping hole of entrained-flow gasifiers is a critical bottleneck for long-term stable operation. This study investigated the damage mechanism of high chromia refractories in four commercial coal-water slurry gasifiers by analyzing gasification coal samples and corroded refractory bricks. Slag characteristics, including crystallization and viscosity-temperature behavior, were evaluated. Results revealed that low-viscosity slag induces more severe refractory damage. To mitigate slag crystallization risk, a safe slag tapping temperature range is recommended as tICT−t2.5 when tICT exceeds t25. Interior morphology of corroded bricks exhibited cracks, primarily attributed to molten slag penetration and subsequent reactions with refractory material. SEM-EDS analysis of slag-aggregate and slag-matrix interfaces identified reduction in Cr2O3 content as the earliest damage characteristic. XRD detected no zirconium-containing spinel in cracks, indicating that thermal expansion mismatch between newly formed phases and the refractory matrix drives crack propagation. A damage mechanism is proposed: initial Cr2O3 depletion compromises both matrix and aggregate, facilitating slag ingress and new phase formation, ultimately leading to structural failure. Early detection or prevention of Cr2O3 reduction is essential to prolong refractory service life.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60581-0
Lignin-derived oxygenated aromatics, particularly phenols and aromatic ethers, are promising feedstocks for synthesizing high-density, high-heat-sink aviation fuels via alkylation-hydrogenation processes. This study systematically evaluates the catalytic performance of various zeolites (Hβ, HZSM-5, MCM-41, and HUSY) in the alkylation of phenol with cyclohexanol. Characterization demonstrates that HUSY zeolite exhibits superior catalytic activity due to its favorable pore architecture and well-balanced acid site distribution, which synergistically facilitate molecular diffusion and catalytic transformations. To further enhance catalytic properties, HUSY was modified with citric acid at various concentrations and compared with NaOH and oxalic acid treatments. Results reveal that citric acid treatment preserves crystallinity while modulating acidity and pore structure. All modified zeolites enhance phenol alkylation activity. Notably, HUSY-0.5M, exhibiting the highest medium-strong acid to total acid ratio, achieves superior performance: 80.4% phenol conversion and 99.6% selectivity for alkylation products. The catalyst also shows high activity for various lignin-derived compounds (p-cresol, anisole, guaiacol), demonstrating broad applicability. This work provides a new strategy for valorizing lignin-derived phenols into high-value fuel precursors through alkylation.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0025
Endogenous alkali and alkaline earth metals (AAEMs) in biomass ash and pyrolysis temperature significantly influence the properties of pyrolysis polygeneration products. This study selected potassium (K+) and calcium (Ca2+) as representative AAEMs, added them at mass ratios of 2%, 5%, and 7% to corn stover via impregnation, and conducted fixed-bed pyrolysis at 400, 500, and 600 °C to investigate the yields and compositions of gas, liquid, and solid products. Results showed that increasing metal ion concentration significantly increased biochar yield, with Ca2+ at 7% achieving 24.96% biochar yield, while bio-oil yield generally decreased. Ca2+ strongly promoted H2 formation due to its Lewis acidity, reaching 32.49% in gas at 7% concentration, and facilitated furan enrichment to 65.88%. K+ at low concentrations favored phenolic formation, while high concentrations promoted ketones and intensified bio-oil cracking. Increasing temperature from 400 to 600 °C decreased biochar yield and increased gas yield, with high temperatures enhancing secondary cracking and reforming, significantly raising H2 and CH4 yields while suppressing oxygenates. At 600 °C, K+ catalysis increased acids to 39.41%, while Ca2+ maintained furans at 65.89%. This study demonstrates that adjusting metal ion concentration and temperature enables directional regulation of high-value bio-oil components and high-energy gases, providing a theoretical basis for optimized biomass pyrolysis utilization.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61100-6
Sodium-ion capacitors (SICs) are attractive for low-cost and safe energy storage, but their practical development is limited by sluggish Na+ storage kinetics and structural instability of anodes. Control of both bulk structure and surface chemistry can address these limitations. We report a heteroatom-rich porous carbon (HRPC) derived from spores via hydrothermal pretreatment, low-temperature carbonization, and acid-mediated functionalization. The optimized GLSHC-HNO3 anode exhibits hierarchical porosity and multi-element co-doping, enabling rapid ion/electron transport, improved electrolyte wettability, and abundant Na+ adsorption sites. Density functional theory calculations reveal distinct contributions of different heteroatom configurations to sodium adsorption. The HRPC anode delivers an ultrahigh reversible capacity of 446.1 mAh g−1 at 50 mA g−1, retains 237.3 mAh g−1 at 2 A g−1, and shows excellent cycling stability. A full SIC with a polyaniline-derived porous carbon cathode achieves an energy density of 114.4 Wh kg−1 at 290 W kg−1, 43.1 Wh kg−1 at 1450 W kg−1, and a maximum power density of 5800 W kg−1, with 84.3% capacity retention after 5000 cycles and nearly 100% Coulombic efficiency. This work establishes a scalable, sustainable route for converting biomass into high-value carbon anodes, providing a new pathway for high-performance sodium-ion energy storage.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0029
Pingshuo coal ash, characterized by high silicon-aluminum content (Si+Al >85%) and low Si/Al ratio (<1.5), exhibits ash fusion temperatures (AFTs) exceeding 1550 °C, rendering it unsuitable for entrained-flow gasifiers. This study investigates the effect of calcium-sodium composite flux on ash fusibility and mineral transformation. X-ray diffraction (XRD) and FactSage thermodynamic simulations were employed to analyze mineral evolution, while molecular dynamics (MD) simulations revealed the underlying melting mechanism. Results show that adding 20% composite flux (CaO/Na2O) lowers AFTs more effectively than equivalent additions of CaO or Na2O alone, indicating a synergistic effect. At a CaO/Na2O ratio of 3:7, the flow temperatures (FT) of two Pingshuo coal ashes decreased to 1377 °C and 1279 °C, respectively. The composite flux promotes reactions between quartz and Na2O/CaO, forming low-melting-point minerals such as nepheline, albite, and gehlenite, while inhibiting mullite formation. Additionally, Na+ disrupts the silicate network, inducing Ca2+ to preferentially coordinate with [AlO4]5- tetrahedra, further breaking Si-O-Si bonds. MD simulations show that atomic diffusion, quantified by mean square displacement (MSD), is significantly enhanced below 1600 K with composite flux addition compared to single fluxes. These findings provide a mechanistic basis for optimizing flux formulations to enable efficient gasification of high-AFT coals.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605024
The refined quantification of carbon footprint in engineering construction projects is critical for formulating targeted carbon reduction strategies during the materialization phase. This study integrates material flow analysis (MFA) with the emission factor method to establish a panoramic carbon flow model for engineering projects. Construction activities are categorized into processing and construction, and office and daily operations, clarifying material and carbon flow relationships within the system boundary and with external systems. Empirical analysis was conducted on the Hejiawan Bridge of Section 11 of the Xiyu High-Speed Railway. Results show that the total carbon flow amounts to 27,482,432.11 kg CO2eq, with direct carbon flow (fuel oil, gasoline) accounting for 7.6% and indirect carbon flow (products, transportation, electricity) accounting for 92.4%. From the material flow perspective, the total carbon flow comprises product carbon flow (72.88%), resource and energy carbon flow (25.73%), transportation carbon flow (1.04%), waste carbon flow (0.35%), and service carbon flow (0.01%). In terms of activity scope, construction-related carbon flow accounts for 99.17%, while office and daily operations account for 0.46%. Two indicators, material consumption carbon flow rate and energy consumption carbon flow rate, are proposed for the first time. Comparative analysis of five girder bridges reveals that the Hejiawan Bridge has a material consumption carbon flow rate of 3.91 kg CO2eq/kg, ranking highest among similar bridges, while its energy consumption carbon flow rate is 13.40 kg CO2eq/kg ec, at a medium level. The assessment indicates relatively high material consumption, suggesting potential for carbon reduction through structural and geological optimization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3717-6
Poly(ethylene oxide) (PEO)-based all-solid-state polymer electrolytes (SPEs) hold significant promise for high-specific-energy and high-safety Li batteries, yet suffer from poor mechanical robustness and low Li+-conducting efficiency. Aramid nanofibers (ANFs), with exceptional mechanical strength and abundant intramolecular/intermolecular interactions, are effective additives, but their strictly symmetric interchain interactions generate a highly ordered hydrogen-bond network, producing inert aggregates that compromise electrolyte stability. Here, we construct a poly(ethylene glycol) (PEG)-mediated asymmetric interaction between ANF chains. PEG chains introduce weaker H-bonding acceptor sites, higher steric hindrance, and abundant lithiophilic groups, simultaneously disrupting strong symmetric ANF-ANF interactions and creating rapid Li-ion channels. The resulting electrolyte maintains excellent mechanical properties (yield stress of 3.25 MPa) and enables stable cycling of Li||Li symmetric cells for over 1600 h with low polarization voltage. In LCO||Li cells, the electrolyte achieves a capacity retention of 82.7% after 300 cycles at 1 C, markedly higher than the unmodified counterpart (35.5%). This synergistic optimization of interfacial compatibility and mechanical performance demonstrates a practical route toward safe, high-energy-density all-solid-state polymer batteries.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022102
Organophosphate pesticides (OPs), the most extensively used insecticides globally, are ubiquitous in environmental matrices and agricultural products, leading to widespread human exposure. This systematic review evaluates the impact of OP exposure on pregnancy complications and adverse birth outcomes, synthesizing evidence from 58 epidemiological studies published between January 2001 and July 2024. Exposure assessment methods, including biomarkers such as urinary dialkyl phosphates, are critically examined. The review finds significant associations between OP exposure and increased risks of spontaneous abortion, gestational diabetes mellitus, gestational hypertension, preeclampsia, preterm birth, and adverse birth outcomes such as low birth weight and reduced head circumference. Potential mechanisms include paraoxonase 1 (PON1) genotype polymorphisms affecting detoxification capacity, oxidative stress, inflammation, metabolic disruption, and altered placental gene networks. The review highlights inconsistencies across studies due to variability in exposure assessment, timing, and population susceptibility. Future research should prioritize longitudinal designs, repeated biomarker measurements, and consideration of PON1 genetic variants to clarify causal relationships and susceptible windows. This comprehensive synthesis provides critical insights for regulatory policies and clinical interventions aimed at mitigating maternal and child health risks from OP exposure.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3942-2
Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511003
Tailings dam leakage can cause secondary sudden water pollution events, imposing severe combined stress of high turbidity and heavy metal contamination on natural water bodies within a short period, threatening aquatic ecological security. Existing studies have systematically revealed the pollution characteristics and biological effects of such events, which are fundamentally distinct from natural high-turbidity water and industrial wastewater leakage. Compared with natural high-turbidity water, tailings leakage inputs finer particles with higher specific surface area, leading to more intense and prolonged turbidity stress. Meanwhile, heavy metals in tailings are more enriched than natural sediments, with higher proportions of active forms and bioavailability, causing significant bioaccumulation and toxic effects, and long-term decline in benthic community species richness. Compared with industrial wastewater leakage, tailings leakage simultaneously releases high concentrations of fine suspended solids and multiple heavy metals, forming a unique 'physical-chemical' combined stress. This synergistic effect amplifies biological toxicity through multiple pathways such as mechanical damage, light limitation, and oxidative stress, resulting in severe and often irreversible ecological damage, such as impaired fish swimming behavior and collapse of benthic community structure. Analyzing the long-term impacts of tailings leakage on aquatic ecosystems from the perspective of combined stress is helpful for providing scientific basis for emergency response and medium-to-long-term ecological risk prevention of related sudden water pollution events.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509036
Algal-derived phosphorus (P) constitutes a significant fraction in eutrophic lakes, with particulate phosphorus (PP) serving as both a major internal P reservoir and a potential target for P resource recovery. This study proposed a chitosan-coupled electroflotation (CEF) technology for efficient enrichment and recovery of algal-derived P from high-algal water. Using Taihu Lake algae-laden water as the test medium, the effects of chitosan dosage and voltage on the enrichment of different P fractions were systematically evaluated. Results showed that the optimal P enrichment was achieved at a chitosan dosage of 15 mg·L−1, and higher voltages further enhanced the enrichment efficiency. Under optimal conditions, PP accounted for 83.57% of the enriched P, indicating a strong capability for particulate P capture. The mechanism involved chitosan-induced flocculation via charge neutralization and sweep flocculation, while higher voltages increased the positive charge density of chitosan molecules, enhancing charge neutralization and electroflotation. In P release experiments, open conditions significantly promoted the transformation of PP to dissolved P, whereas closed conditions inhibited this process. Additionally, chitosan's antibacterial action and physical retention effectively limited P release. Compared with conventional metal salt coagulants, this method avoids metal ion residues, offering high environmental safety and providing a green and feasible approach for the harmless disposal and resource utilization of algal-derived P in eutrophic lakes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4012-4
Stimuli-responsive fluorescent hydrogels, owing to their tunable optical properties and unique smart response characteristics, have significant potential in encryption applications and information security. However, most current systems are limited to single-stimulus responsiveness and lack the capability for programmable information erasure or multi-modal dynamic synergy. Hence, we propose a multi-stimuli-responsive phase-change hydrogel incorporating aggregation-induced emission hydrophobic carbon dots (AIE-HCDs) and polyethylene glycol (PEG)-cellulose network, demonstrating dynamic fluorescence chromism under various external triggers. The hydrogel exhibits solvent-exchange-triggered fluorescence color changes from blue to red, enabled by the concentration modulation of AIE-HCDs through the exchange between PEG and water. Additionally, the temperature-induced phase transition of PEG from crystalline to molten state modulates the aggregation and dispersion of AIE-HCDs, thereby enabling dynamic fluorescence color changes. The phase transition further confers excellent shape-memory behavior and adjustable mechanical properties, with the tensile modulus varying from 6.28 MPa in the molten state to 36.23 MPa in the crystalline state, while maintaining high transparency (~88% in the molten state). By utilizing micro-contact printing and the multi-stimulus response, an encryption platform enables information to be hidden, selectively read under sequential stimuli (thermal, UV, and solvent), and completely erased upon demand. This strategy demonstrates significant potential for advancing high-level information encryption and anti-counterfeiting technologies.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60661-5
Hierarchical aluminum-rich zeolites are promising catalysts for Knoevenagel condensation, but their synthesis is often costly and energy-intensive. This work reports a green route to hierarchical NaY zeolite using submolten salt (SMS) activated perlite as the sole silicon and aluminum source. The product exhibits high purity and crystallinity, with a framework SiO2/Al2O3 molar ratio of approximately 4.2, intercrystalline mesopores centered at about 20 nm, large external surface area, and abundant basic sites. Crystallization studies reveal that small crystals initially assemble on the activated perlite surface, then grow and aggregate to form a crystal-packed morphology with intercrystalline mesopores. In the Knoevenagel condensation of benzaldehyde with ethyl cyanoacetate, the hierarchical NaY zeolite achieves higher benzaldehyde conversion than conventional NaY zeolites, attributed to improved mass transfer and increased basic site accessibility. This work provides a cost-effective and sustainable catalyst while valorizing natural perlite.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4037-1
Nasopharyngeal carcinoma (NPC) poses a therapeutic challenge due to its anatomical complexity and the limitations of conventional treatments in achieving precise targeting and sufficient efficacy. Here, we report a multifunctional platform based on heat-triggered electrospray self-healing porous poly(lactic-co-glycolic acid) (PLGA) microspheres encapsulating indocyanine green (ICG), sequentially coated with a tannic acid-Fe3+ (TAF) metal-phenolic network and fibronectin (FN) for targeted photothermal/chemodynamic combination therapy. The resulting functional microspheres (PI-TAF@FN) exhibit an average size of 1.9 μm, excellent colloidal stability, heat-induced self-healing performance, and a high photothermal conversion efficiency of 51.4%. These microspheres specifically target NPC cells via FN-mediated integrin recognition, enabling ICG/TAF-mediated photothermal therapy under 808-nm laser irradiation and TAF-mediated chemodynamic therapy, leading to enhanced cancer cell apoptosis in vitro. In a mouse NPC model, the combined photothermo-chemodynamic therapy achieved effective tumor treatment with minimal systemic toxicity. Furthermore, the dual TAF and ICG components allow multimode FN-targeted T1-weighted magnetic resonance/fluorescence/thermal imaging for precision NPC management. This electrospray self-healing porous microsphere platform offers a unique theranostic strategy that can integrate diverse therapeutic and diagnostic components for precision oncology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.