SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4288-1
The high-temperature oxidation resistance of Cr2AlC MAX phase ceramics is severely compromised by rapid Al depletion and the formation of a brittle sub-surface Cr7C3 layer. This study elucidates how trace Y2O3 doping (0.25 and 0.5 wt.%) modulates the oxidation behavior of Cr2AlC at 1100 °C. The incorporation of 0.5 wt.% Y2O3 significantly suppresses the parabolic rate constant compared to undoped counterparts. This kinetic suppression is attributed to the Reactive Element Effect (REE), where Y3+ segregation at α-Al2O3 grain boundaries inhibits outward Al3+ diffusion, shifting the scale growth mechanism to inward oxygen diffusion control. Consequently, this retarded Al consumption prevents the decomposition of the Cr2AlC substrate into Cr7C3. While undoped specimens fail due to volume contraction and Kirkendall voiding associated with the Cr7C3 interlayer, specimens with the most effective doping content within the investigated range maintain a stable, atomically sharp α-Al2O3/Cr2AlC interface devoid of voids and decomposition products. The superior adhesion of this interface is attributed to three synergistic factors: the elimination of volumetric mismatch induced by phase transformation, the mechanical interlocking provided by Y-rich oxide pegs, and the intrinsically higher interfacial bonding strength of the α-Al2O3/Cr2AlC system as confirmed by DFT calculations. These findings provide a mechanistic framework for designing oxidation-resistant MAX phase ceramics via reactive element doping.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3666-2
Light-emitting electrochemical cells (LECs) are promising for low-cost, solution-processed display and lighting applications, yet achieving high efficiency and color purity remains challenging. Here, we report two ionic multi-resonance (MR) emitters with narrowband blue emission for high-color-purity LECs. By covalently bonding an imidazolium functional group into a boron/nitrogen-doped polycyclic skeleton, the emitters retain the narrowband emission and high photoluminescence quantum yield (PLQY) of the MR core while gaining ionic character. The design exploits two types of nitrogen atoms in the imidazolium unit: the pyrrolic N at the 1-position forms a para-B-π-N linkage, elevating excited-state energy levels and blue-shifting emission; the pyridinic N at the 3-position provides a quaternization site, yielding intrinsically ionic emitters compatible with ionic hosts. The emitters exhibit blue emission with narrow full-width at half-maximum of 26–27 nm and high PLQYs of 95%–97% in solid-state films. LECs based on these emitters achieve narrowband blue electroluminescence with CIE coordinates of (0.12, 0.26) and a maximum external quantum efficiency (EQE) of 4.6%, representing the first narrowband blue LECs based on intrinsically ionic MR emitters. This work demonstrates a viable molecular design strategy for high-color-purity LECs, addressing the long-standing trade-off between efficiency and color purity in this technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3702-0
Construction of metal-mediated redox sites is an appealing approach to enhance photocatalytic CO2 reduction coupled with H2O oxidation. However, conventional static redox sites generally lack spatiotemporal matching during reaction processes due to the constraints of rigid structure and the linear scaling relationship of adsorbed species. Herein, an alkanolamine-Ir synergistic system was developed, where flexible monoethanolamine (MEA) molecules function as molecular ferries to selectively adsorb CO2 via carbamate formation, while adjacent Ir nanoparticles (NPs) serve as H spillover hubs that relay protons, creating spatiotemporal adaptability that synchronizes CO2 reduction and water oxidation. In addition, time-resolved in situ spectroscopy directly captures the rapid transformation of carbamate intermediates concurrent with sustained IrOOH intermediates formation. Microkinetic modeling further demonstrates that the MEA-Ir modified system (M-Ir/ACN) creates interconnected H spillover networks between Ir NPs and MEA, facilitating efficient proton transport that drives *COOH formation with a favorable thermodynamic energy. As a result, the M-Ir/ACN achieves a 20-fold increase in CO production compared to the pristine sample while maintaining high stability throughout 45 h of continuous operation. This study presents that flexible molecular ferries boost CO2 adsorption, and deciphers how flexible molecular-metal synergy directs the trafficking of CO2-derived intermediates toward highly efficient CO2 photoreduction.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0020
Ammonia borane (AB) is a promising hydrogen storage material due to its low molecular weight and high hydrogen content. The development of low-cost, high-activity catalysts for AB hydrolysis is critical for industrialization. In this work, CuO nanosheets (CuO NS) were synthesized via a solvothermal method under alkaline conditions using anhydrous copper chloride as precursor. Subsequently, low-temperature phosphating converted CuO NS into Cu3P@CuO nanosheets (Cu3P@CuO NS). The morphology and structure were characterized by SEM, TEM, AFM, XRD, and XPS. The catalytic performance for AB hydrolysis was evaluated, revealing that at a phosphating ratio of m(CuO NS)/m(NaH2PO2)=1 (0.1 g each), Cu3P@CuO NS exhibited excellent activity with a TOF of 57.23 min−1 and an apparent activation energy of 44.31 kJ/mol. The reaction followed pseudo-first-order kinetics with respect to catalyst amount and pseudo-zero-order kinetics with respect to AB concentration. The superior performance is attributed to the abundant active sites exposed by the nanosheet structure. Given the extremely low cost, Cu3P@CuO NS is a promising alternative to noble metal catalysts for hydrogen generation from AB.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604004
Tire wear particles (TWPs) are emerging pollutants and constitute the dominant type of microplastics (MPs) in urban stormwater runoff, accounting for up to 90% of MPs in some cases. They are characterized by small size, high mobility, complex composition, and significant toxicity. Current research on TWPs remains fragmented, lacking a comprehensive understanding of their environmental behaviors and pollution control in aquatic systems. This review systematically analyzes the enrichment and vectoring roles of TWPs for coexisting pollutants, and their environmental fate, including ecotoxicological impacts, detection methodologies, release of intrinsic additives, and aggregation and sedimentation behaviors. Drawing on insights from other microplastic studies, the paper explores control technologies across the pollution pathway—source, transport, and terminal treatment—and proposes feasible management strategies. Key findings indicate that TWPs can adsorb heavy metals and organic contaminants, with adsorption capacities influenced by aging processes. Their aggregation is governed by solution chemistry, with critical coagulation concentrations varying with ionic strength and pH. The release of additives such as zinc and benzothiazoles is significant, posing ecological risks. Future research should focus on real-water aggregation mechanisms, additive release under natural conditions, long-term performance of treatment facilities like constructed wetlands under TWPs stress, enzymatic degradation pathways, and integration of AI, big data, and IoT for cost-effective detection and risk modeling. This review provides a scientific basis for developing targeted pollution control measures for TWPs in aquatic environments.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025081103
Nitrous acid (HONO) is a critical precursor of hydroxyl radicals (·OH) in the atmosphere, influencing oxidative capacity and secondary pollutant formation. However, model simulations often underestimate HONO concentrations, and its role in nitrate formation remains unclear. This study investigates a typical winter haze episode in Guangzhou (January 2021, peak PM2.5: 243.0 μg·m−3) using observational data and a box model to quantify HONO sources and assess their impact on ·OH and particulate nitrate. HONO concentrations increased from (1.0±1.0) μg·m−3 during clean periods to (9.2±3.8) μg·m−3 during polluted periods, while nitrate rose from (6.4±3.4) to (43.3±20.0) μg·m−3 (6.8-fold). Incorporating seven additional HONO sources improved simulated daytime HONO from (0.3±0.1) to (6.5±2.3) μg·m−3, matching observations. Source apportionment showed direct vehicle emissions dominated (49.7%), followed by heterogeneous photosensitized reaction of NO2 on aerosol surfaces (23.0%), ground surface reaction (10.7%), and nitrate photolysis (8.7%). With optimized HONO, simulated daytime ·OH increased from (0.6±0.3)×10^6 to (1.5±0.8)×10^6 molec·cm−3 (1.2-fold), and nitrate production via ·OH+NO2 increased from (3.4±1.2) to (15.3±8.5) μg·m−3·h−1 (3.5-fold). The simulated-to-observed nitrate ratio improved from 21% to 81%. Sensitivity tests indicated that setting nitrate photolysis enhancement to 100 times gaseous nitric acid yielded better HONO and nitrate simulations. This study underscores the importance of refining HONO sources for accurate simulation of atmospheric oxidation and nitrate formation, aiding pollution control strategies.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606004
To identify optimal watershed remediation pathways under environmental and economic dimensions, an integrated environmental-economic impact assessment framework combining life cycle assessment (LCA) and life cycle costing (LCC) based on openLCA was established, using 1 m³ of treated wastewater as the functional unit. This framework comprehensively evaluated the environmental impacts and economic costs of three ecological buffer measures—constructed wetlands, ecological intercepting ditches, and vegetation restoration projects—in non-point source pollution control. The results indicated that constructed wetlands offer the optimal environmental-economic profile, featuring the lowest comprehensive cost (¥1.01 yuan/m³) and the lowest load across most environmental impact categories, with only slightly higher land resource consumption intensity. Ecological intercepting ditches exhibited higher impacts in areas such as metal resource consumption due to the use of rebars and base fertilizer inputs, resulting in a moderate comprehensive cost (¥1.57 yuan/m³). Vegetation restoration projects incurred the highest comprehensive cost (¥61.14 yuan/m³) and produced the most significant environmental impacts, with elevated indicators such as human carcinogenic toxicity. This primarily stemmed from the extensive use of concrete grass pavers and base fertilizer in rural river sections. These findings provide quantitative references for environmental-economic integrated evaluation and decision-making regarding ecological buffer zone engineering schemes in similar watersheds.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3986-2
Organic/molecular ferroelectrics exhibiting spontaneous polarization have attracted increasing attention due to their flexibility, light weight, low-temperature processability, environmental friendliness, and biocompatibility. Among them, organic donor-acceptor cocrystals, self-assembled from two or more components, offer new insights into ferroelectricity. This review systematically examines recent progress in organic donor-acceptor cocrystal ferroelectrics, focusing on microscopic origins of ferroelectricity, structure modulation strategies, and underlying mechanisms. Ferroelectric origin mechanisms, including intermolecular charge transfer, proton transfer, and order-disorder transitions, are analyzed in detail. Structure-property relationships in crystal engineering are summarized, and recent advances in theoretical simulations, experimental characterization techniques, and practical applications are introduced. Finally, current challenges and future research perspectives are outlined. The review highlights that weak intermolecular interactions often lead to low Curie temperatures (Tc), limiting practical applications. Strategies to enhance Tc involve introducing stronger molecular interactions to increase transition energy barriers. Notably, room-temperature ferroelectricity in organic cocrystals has been achieved, as demonstrated by Wiscons et al. (Angew Chem Int Ed, 2018, 57: 9044–9047). The review underscores the potential of organic cocrystal ferroelectrics for flexible and wearable electronics, while addressing the need for higher Tc and robust switching performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3900-8
Memristors, which leverage ion migration for resistance switching, offer breakthroughs in bionic perception, information security, and edge computing but face bottlenecks in functional integration and stability. Herein, we explore all-inorganic Cu3SbI6 nanocrystals (NCs) & PMMA composite memristors (Ag/PMMA&Cu3SbI6/ITO) regulated by NCs doping (0–15 wt%). The devices operate via electric field-induced Ag+ ion migration and conductive filament dynamics, where NCs act as local electric field enhancers. At a doping concentration of 4 wt%, stable bipolar switching (Ron/Roff > 2 × 10^3, cycling endurance > 700 cycles) enables the simulation of biological nociception/Pavlovian reflexes and the construction of basic logic gates. At 2 wt%, sparse NCs induce random filament formation for encryption key extraction, which integrates with 4 wt% logic gates to enable efficient encryption/decryption of text/image data. This work provides a strategy for designing multifunctional memristors by regulating ion transport through nanocrystal concentration, offering references for related functional integration and cross-disciplinary applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4057-4
The escalating use of ionizing radiation in medical and industrial applications necessitates lead-free, flexible, and sustainable shielding materials. Current development relies on empirical trial-and-error, which is inefficient. This study introduces a machine learning-assisted Monte Carlo simulation strategy for rapid optimization of metal filler compositions for X-ray attenuation across 40–120 kV. Guided by this AI-driven approach, polyvinyl alcohol (PVA)-based gels containing uniformly dispersed Bi/W/Gd2O3 nanoparticles were developed, forming within 1 minute at -20°C using a PVA-DMSO/H2O co-solvent system. The optimized gel with 50 wt% metal loading exhibits exceptional mechanical properties: tensile strength of 1.76 MPa, toughness of 6.3 MJ m−3, and elongation of 600%. It achieves >98% X-ray shielding efficiency at 5 mm thickness, outperforming lead composites at 120 kV. The physically cross-linked network provides recyclability and anti-freezing capability, retaining flexibility at -50°C. This work establishes a data-driven paradigm for designing high-performance radiation-shielding materials, demonstrating AI's potential to accelerate materials discovery and enable scalable fabrication of eco-friendly protective systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4031-6
Organic fluorophores operating in the second near-infrared (NIR-II, 1000–1700 nm) window are highly attractive for cancer phototheranostics. Yet, the advancement of aza-BODIPY-based NIR-II dyes remains challenging due to their limited spectral tunability and diminished fluorescence quantum yields (FLQY) under physiological conditions. Herein, we propose a rational donor-acceptor (D-A) molecular engineering strategy to construct an aza-BODIPY fluorophore, TPACN, featuring intramolecular charge transfer (ICT)-enhanced NIR-II emission and balanced photothermal performance. By introducing electron-rich triphenylamine (TPA) donors and peripheral cyano (–CN) acceptors, the optimized D-A coupling significantly strengthened the ICT effect, leading to broadened NIR absorption, a markedly red-shifted fluorescence peak at 1086 nm, and an exceptional fluorescence quantum yield of 1.55% in dichloromethane (DCM). When encapsulated in F127, TPACN nanoparticles (TPACN NPs) maintained a high aqueous FLQY of 0.20%, accompanied by a notable photothermal conversion efficiency (PCE) of 39% under 808 nm irradiation. The sterically twisted TPA units effectively alleviated aggregation-caused quenching (ACQ) and fine-tuned the excited-state energy dissipation pathways, realizing a synergistic balance between radiative (fluorescence) and non-radiative (heat) relaxation. Benefiting from these optimized photophysical properties, TPACN NPs achieved high-resolution NIR-I photoacoustic and NIR-II fluorescence dual-modal imaging, enabling accurate tumor visualization and efficient photothermal ablation in vivo. This work introduces a general design paradigm that exploits ICT modulation and steric engineering to overcome the intrinsic fluorescence bottleneck of aza-BODIPY systems, offering new molecular insights for the advancement of high-performance NIR-II dyes for precision phototheranostics.