SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4202-3
Carbon dots (CDs) with absorption in the second near-infrared window (NIR-II, 900-1700 nm) hold promise for tumor theranostics, yet existing synthesis methods often involve complex procedures, harsh conditions, or lack precise control. Here we report a 'self-photooxidation-restructuring' strategy that enables structural reorganization of the carbon core in CDs, achieving a significant redshift of absorption into the NIR-II region. Under ultraviolet (UV) light irradiation, the precursor (B-CDs, absorption in UV region) generates singlet oxygen, which self-oxidizes aldehyde groups and the carbon skeleton of B-CDs to stronger electron-withdrawing carboxyl groups and carbon radicals, respectively. These processes facilitate the formation of new C=C bonds between isolated aromatic domains, thereby transforming B-CDs into novel CDs (N-CDs) characterized by enhanced donor-acceptor interactions and a redshift in absorption toward the NIR-II window. Various experimental data, including high-resolution XPS, FTIR, NMR, EPR, have proved the proposed formation mechanism. The novel N-CDs afforded a high photothermal conversion efficiency of up to 71.33%, which enabled 1064 nm laser-activated photoacoustic imaging (PAI)-guided photothermal therapy (PTT) in tumors. This work opens a new avenue for the synthesis and modulation of CDs in the NIR-II region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604020
Source reduction of volatile organic compounds (VOCs) from industrial emissions is a core task for air quality improvement during China's 15th Five-Year Plan period. Supercritical carbon dioxide (ScCO2) spraying technology emerges as a cutting-edge VOCs abatement approach, as it reduces both VOCs content in coatings and coating consumption. However, empirical research on coating efficiency enhancement and VOCs emission reduction at demonstration scale remains scarce. This study selected three solvent-based coating systems widely used in Chinese industry: wooden furniture-polyurethane, wooden furniture-acrylic, and metal parts-fluorocarbon. A calculation method for ScCO2 spraying efficiency and VOCs emission reduction rate was established, and emission reduction performance was systematically measured. Results indicated that compared with high-pressure airless spraying, average coating efficiency improvement rates of ScCO2 spraying at spray distances of 60 cm and 40 cm across the three scenarios were (30.62±8.75)% and (31.74±12.83)%, respectively. Correspondingly, average VOCs emission reduction rates were (62.10±1.59)% (60 cm) and (53.73±11.78)% (40 cm). VOCs content reduction rates for the three systems were 46.03%, 23.80%, and 37.60%, respectively. Diluent addition was reduced from 60% to 10%, achieving a substitution rate of 83%. The study confirms that ScCO2 spraying can achieve significant reductions in VOCs and solvent emissions in wooden furniture and metal parts coating processes, providing empirical support for industrial promotion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3595-7
Cu(I) complexes exhibiting thermally activated delayed fluorescence (TADF) have emerged as promising alternatives to noble-metal-based emitters for organic light-emitting diodes (OLEDs). However, the development of red-emitting Cu(I) complexes has been hindered by slow radiative decay and fast nonradiative decay. In this study, a linear two-coordinate Cu(I) complex, ICuTMC, was designed and synthesized. By pairing a pyrazine-fused N-heterocyclic carbene and a tetra-methylcarbazolyl ligand, a strong ligand-to-ligand charge transfer excited state is generated. Single-crystal structure authenticates close intramolecular C–H···Cu contacts, providing good steric shielding to the metal center. C–H···π interactions between ligands are also revealed. The complex exhibits highly efficient red TADF with emission maximum at 622 nm, photoluminescence quantum yield of 76%, and short delayed fluorescence lifetime of 0.24 μs. This is enabled by a large oscillator strength from the coplanar donor-Cu-acceptor conformation, a small singlet-triplet energy gap from spatial separation of frontier molecular orbitals, and strong spin-orbit coupling from the metal center. Vacuum-deposited OLEDs based on ICuTMC achieve a peak external quantum efficiency of 25.9% and a significantly small roll-off of 1.9% at 10,000 cd m−2. These performances demonstrate a way to overcome the energy gap law for linear coinage metal complexes toward red OLEDs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4043-3
In-plane InAs nanowires and nanowire networks are promising platforms for electronics, optoelectronics, and topological quantum computing due to their small electron effective mass, narrow bandgap, high electron mobility, strong spin-orbit coupling, and large Landé g factor. However, their selective area growth on CMOS-compatible group-IV substrates remains challenging. Here, we report the selective area growth of high-quality in-plane InAs nanowires and nanowire networks on Ge(111) substrates by molecular-beam epitaxy. Conventional selective-area epitaxy fails to simultaneously achieve good selectivity and continuity. To overcome this, we developed a metal-sown, single-indium-source two-step growth method, which attains both selectivity and continuity but yields nanowires with rough surfaces and lengths below 10 μm. We then introduced an upgraded metal-sown, dual-indium-source two-step growth method, successfully fabricating in-plane InAs nanowires and nanowire networks with smooth surface morphology and lengths exceeding 60 μm. By optimizing the As beam equivalent pressure, overgrowth at network junctions is effectively suppressed, resulting in uniform nanowire networks. High-resolution transmission electron microscopy and Raman spectroscopy confirm the high-quality single-crystalline nature and pure zinc-blende structure of the nanowires and networks. This work establishes a foundation for fabricating high-quality in-plane InAs/superconductor hybrid nanowires and nanowire networks on Ge substrates.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025020901
The intensification of environmental pollution necessitates the development of efficient and sustainable remediation technologies. Piezoelectric-coupled photoelectrocatalysis and piezoelectric-coupled electrocatalysis, which convert mechanical energy into electrical energy and integrate with photoelectrocatalytic or electrocatalytic processes, have demonstrated significant potential for environmental remediation. By combining the piezoelectric effect of piezoelectric materials with photocatalysis or electrocatalysis, these technologies markedly improve the separation efficiency of photogenerated or electrogenerated electron-hole pairs, thereby enhancing pollutant degradation. This review explores the working principles of piezoelectric-coupled photoelectrocatalysis and electrocatalysis, highlighting their latest advancements in environmental remediation, including the degradation of organic pollutants and value-added conversions. It also addresses the challenges currently faced in applying these technologies, such as limitations in light transmittance, restricted light absorption ranges, rapid carrier recombination, and the short lifespan of electrodes in electrochemical systems. Finally, potential future research directions are discussed, emphasizing the need for improved material stability, scalable synthesis methods, and a deeper mechanistic understanding to bridge the gap between laboratory research and practical applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508101
The emission of sulfur dioxide (SO2) and nitrogen oxides (NOx) from fossil fuel combustion and metal smelting industries poses severe risks to environmental and human health. This study utilized depleted lead-zinc molten slag as a desulfurizer for wet flue gas desulfurization, and the resulting desulfurization slurry was further employed for NOx removal, achieving resource utilization. The desulfurization efficiency of the slag was determined, and NaClO2 was identified as the most effective oxidant when combined with the slag slurry for NOx removal. The effects of NaClO2 concentration, reaction temperature, flue gas flow rate, oxygen concentration, NOx concentration, and pH on removal efficiency were investigated. Optimal conditions were found at NaClO2 concentration of 2.5 mmol·L−1, temperature 45 °C, flue gas flow 200 mL·min−1, O2 volume fraction 10%, NOx volume fraction 0.03%, and pH 6, achieving a NOx removal efficiency of 97.24%. Metal ion experiments revealed that Fe3+, Zn2+, Mn2+, and K+ exhibited synergistic effects with NaClO2, with Fe3+ showing the most significant enhancement. Fe3+ promoted the decomposition of NaClO2 to generate stronger oxidants such as ClO2, thereby enhancing NOx oxidation and absorption. This approach offers a cost-effective and environmentally friendly alternative to traditional selective catalytic reduction, avoiding ammonia slip and secondary pollution.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3937-7
Triple-negative breast cancer (TNBC) remains a formidable clinical challenge due to its high invasiveness and adaptive resistance. We report a bio-mimetic nanoplatform (HMPB-GOx@HSA-Cu2+) integrating starvation therapy, Fenton/Fenton-like catalysis, and mild photothermal therapy (mPTT) for synergistic TNBC treatment. The nanoreactor comprises a hollow mesoporous Prussian blue (HMPB) core loaded with glucose oxidase (GOx), encapsulated in a human serum albumin (HSA) shell covalently functionalized with Cu2+ ions. This design enables spatiotemporal control of Cu2+-mediated Fenton catalysis, responding to the tumor microenvironment (TME) to generate cytotoxic hydroxyl radicals (·OH). GOx catalyzes glucose depletion, elevating H2O2 levels and acidity, thereby enhancing catalytic efficiency. Concurrently, mPTT at ~43–45°C accelerates the Fenton reaction and suppresses heat shock protein (HSP) expression, overcoming thermal tolerance via ATP depletion. In vitro and in vivo studies demonstrate significant anti-tumor efficacy through reactive oxygen species (ROS) accumulation and metabolic disruption, with excellent biocompatibility. This work presents a highly integrated strategy for precise TNBC therapy, addressing limitations of conventional monotherapies.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60628-1
The coupling of CO2 with olefins to produce cyclic carbonates has emerged as an important research topic in sustainable chemistry, owing to its high atom economy and the wide applicability of the resulting products. However, this reaction faces a significant challenge due to the mismatch between the rates of the epoxidation and cycloaddition steps. In this work, a series of TS-1 zeolite catalysts encapsulating different amounts of molybdenum acetylacetonate were prepared through hydrothermal synthesis followed by post-treatment, with the aim of elucidating the rate balance between the epoxidation and cycloaddition steps and the underlying regulation mechanism. Characterization results show that the Mo species were present as highly dispersed molybdenum acetylacetonate complexes that were stably confined within the TS-1 framework. These complexes interact electronically with the tetra-coordinated Ti sites to form synergistic active centers, while imposing negligible effects on the zeolite structure and porosity. In the CO2-styrene coupling reaction, tuning the Mo loading enabled effective control over the epoxidation rate, thereby achieving an appropriate balance with the subsequent cycloaddition step. The optimized catalyst delivered excellent performance under mild conditions, with a styrene conversion of 83.4% and a selectivity of 75.3%, and also exhibited outstanding recyclability. Overall, this encapsulated catalyst successfully addresses the dual challenges of rate matching and active-site stability in CO2–olefin coupling, providing valuable insights for the rational design of efficient, durable bifunctional catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3984-5
Rechargeable aluminum batteries (RABs) are promising for large-scale energy storage due to high theoretical capacity, inherent safety, and abundant aluminum reserves. However, conventional AlCl3-based ionic liquid electrolytes suffer from high cost, uncontrolled dendrite growth, and severe anode corrosion. Here, a molecular-level ligand engineering strategy is proposed, employing nitrogen-containing cyclic amides with tunable N–H functionalities to modulate the coordination environment of deep eutectic electrolytes (DEEs). Combined experimental and theoretical investigations reveal that the α-pyrrolidone-based DEE (PDEE) possesses a wider electrochemical window, higher ionic conductivity, and lower polarization. Precise N–H regulation optimizes cationic ligand and chloroaluminate anion interactions, accelerating ion transport to facilitate uniform Al deposition without dendrites. The amine functionalities enable in situ construction of a uniform inorganic-organic bilayer solid electrolyte interphase, mitigating anode corrosion and enhancing long-term interfacial stability. As a result, Al//Al symmetric batteries with PDEE achieve stable cycling for over 2000 hours, while Al-graphite full batteries demonstrate negligible capacity decay after 6000 cycles. This study establishes that ligand molecular engineering offers an effective strategy for optimizing DEEs, enabling durable and high-performance RABs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511050
Municipal solid waste (MSW) management in Inner Mongolia has long relied on landfilling, facing land scarcity and leachate management challenges. This study addresses the region's dry, cold climate, high proportion of agricultural and livestock waste, fluctuating moisture content, and weak leachate treatment capacity. An engineering optimization was implemented on an 80 t·d−1 vertical rotary gasification-incineration system featuring a dual-combustion-chamber design (primary chamber for medium-temperature pyrolysis-gasification at 550–650 °C and secondary chamber for high-temperature oxidation above 900 °C), coupled with in-situ leachate recirculation. Field measurements showed improved processing capacity and continuous operation stability. Under the project's leachate yield, in-situ recirculation achieved on-site disposal without significant adverse effects on gasification-incineration conditions, providing buffering against moisture fluctuations. During the monitoring period, major gaseous pollutant emissions remained below current national standards. The results provide engineering references for the co-processing and stable operation of small-scale county-level MSW treatment facilities.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025050803
This study systematically investigates the synergistic drag reduction mechanism of surfactants and porous media in coal seam water injection. Four surfactant types—cationic CTAB, anionic SDBS, amphoteric BS-12, and nonionic OP-10—were tested with five porous media pore sizes (3–12 mm) using a custom-built all-in-one drag reduction test system. The effects of surfactant type, mass concentration, driving frequency, and pore diameter on drag reduction efficiency were evaluated. Results show that in an empty tube, drag reduction efficiency increases with mass concentration. As driving frequency increases, drag reduction first rises then falls, peaking at 35 Hz. With porous media, drag reduction exhibits pore size dependence, reaching a maximum at 8 mm and decreasing thereafter. The composite surfactant-porous media system achieves synergistic enhancement over single systems. At 0.05% mass concentration, all surfactants attain maximum drag reduction, with CTAB showing the highest efficiency. Optimal conditions (0.05% CTAB, 35 Hz, 8 mm pore size) yield a drag reduction rate of 66.14%, a 1.4-fold improvement over 20 Hz. These findings demonstrate that tailoring surfactant and porous media parameters can significantly optimize coal seam water injection efficiency, offering a practical approach for dust control in mining.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4188-x
Sodium metal anodes, with high theoretical capacity (1166 mAh g−1) and low redox potential (−2.71 V vs. H+/H2), are promising for low-cost, high-energy sodium metal batteries (SMBs). However, uncontrolled dendrite growth and drastic volume changes cause short circuits and safety hazards. This work presents a dual-gradient engineering strategy to address these issues. A 3D self-supporting current collector (SSM-ZnS@Zn) was fabricated by laminating a stainless steel mesh (SSM) with a Zn foil decorated with pre-grown ZnS nanoparticles via a one-step rolling process. The substantial electrical conductivity difference between the bottom zinc foil (~16.6×10^6 S m−1) and the top SSM (~1.3×10^6 S m−1) establishes an electric field gradient. Simultaneously, a sodiophilicity gradient is created by electrochemically in-situ generated sodiophilic NaZn13 and Na2S on the bottom zinc foil, combined with the sodiophobic upper SSM layer. This dual-gradient synergy guides bottom-up sodium deposition, homogenizes current density and electric potential, and reinforces mechanical robustness. The framework exhibits outstanding electrochemical performance in both symmetric and full cells, outperforming most reported 3D structures. A pouch cell assembled with SSM-ZnS@Zn successfully lit an LED lamp, demonstrating practical application potential. This strategy surpasses single-gradient limitations and offers a new approach for high-performance sodium metal anode design.