SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4506-2
This review critically examines recent advances in plasmonic organic photovoltaics (OPVs) enabled by metal nanoparticles (MNPs), nanopatterns, and subwavelength nanogratings, with a specific focus on the transition from fullerene acceptor (FA) to nonfullerene acceptor (NFA) systems. When incorporated into hole transport layers (HTLs), electron transport layers (ETLs), active layers, or transparent electrodes, these nanostructures leverage localized surface plasmon resonance (LSPR) to enhance light absorption, exciton generation and dissociation, and charge transport. Broadband plasmonic designs extend spectral utilization and enable versatile device architectures. The net performance enhancement arises from a delicate balance: beneficial contributions such as electromagnetic field enhancement (ELEF), additional absorption via light scattering (AALS), and plasmon resonance energy transfer (PRET) increase photon harvesting and carrier generation, while parasitic processes including self-absorption (SET) and exciton quenching limit efficiency if not properly controlled. Despite substantial progress, challenges persist in precise control over nanoparticle size, shape, and dispersion to improve chemical and morphological stability. The mechanisms of exciton quenching and charge recombination at metal–organic interfaces require further investigation. Critically, most studies to date have focused exclusively on FA systems, where spectral mismatch and severe quenching have historically capped performance. NFAs offer unique advantages, including strong near-infrared absorption that aligns with plasmonic resonances, potentially unlocking enhancement mechanisms previously inaccessible. These insights provide a framework for understanding plasmonic effects in OPVs and highlight the prospective potential of plasmonic nanostructured designs to drive further performance improvements, particularly as the field shifts toward next-generation NFA-based OPV devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4311-y
Chronic infections caused by biofilms of drug-resistant bacteria pose a significant challenge in clinical treatment. Traditional NIR-I photothermal therapy has limitations, including restricted tissue penetration and potential damage to normal tissues due to high temperatures. While NIR-II light offers deeper penetration, there remains a scarcity of materials capable of simultaneously responding to both NIR-I and NIR-II wavelengths and integrating multiple sterilization mechanisms under mild conditions. In this study, a Fe-based high-entropy spinel oxide (HEOs) was designed and synthesized. Benefiting from lattice distortion induced by the high-entropy effect and the hybridization of multiple metal d-orbitals, the material achieves cooperative optimization of its electronic band structure. Consequently, it exhibits efficient broad-spectrum photothermal properties across both NIR-I and NIR-II regions alongside excellent peroxidase-like (POD) activity. Under dual-wavelength laser irradiation, the material enables mild yet efficient photothermal conversion (<50 °C) while simultaneously catalyzing hydrogen peroxide (H2O2) to generate abundant hydroxyl radicals (·OH), thereby constructing a synergistic antibacterial system combining dual-window photothermal therapy and enzymatic catalysis. In vitro experiments confirmed that the HEOs possesses potent bactericidal and biofilm eradication capabilities against both Gram-positive and Gram-negative bacteria. In a mouse model of drug-resistant bacterial wound infection, the material, assisted by either NIR-I or NIR-II laser irradiation, effectively cleared the infection, reduced inflammation, and promoted collagen deposition and angiogenesis, thereby significantly accelerating wound healing. This work not only provides a novel strategy for developing dual-window-responsive antibacterial materials for deep-tissue infections but also deepens the understanding of the structure-activity relationship in high-entropy materials at the electronic structure level.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3930-3
Methylammonium lead tribromide (MAPbBr3) single crystals (SCs) are promising for room-temperature gamma-ray and X-ray detection, but scaling their size often compromises crystal quality. Here, we report a strategic precursor stoichiometry engineering approach to grow inch-sized, high-quality MAPbBr3 SCs via a constant-temperature evaporation method. We show that constructing a robust electrical double layer through organic cation modulation effectively stabilizes the colloidal precursor. This is achieved by synergistically suppressing MA+ deprotonation while promoting MA+ adsorption as counterions on the [PbBrn]2−n complexes, which collectively strengthens interparticle repulsion and raises the nucleation barrier. This multifaceted approach yields MAPbBr3 SCs with lateral dimensions up to 2 inches and an exceptional X-ray diffraction rocking curve full width at half maximum (FWHM) of 0.0093° at the (002) face. Consequently, the SCs enable spectroscopic-grade gamma-ray detection, achieving energy resolutions (ER) of 8.4% for the 57Co source (122 keV) and 11.1% for the 137Cs source (662 keV), along with a high X-ray sensitivity of 1.65 × 10^4 μC Gy−1 cm−2. This work paves the way for the practical application of MAPbBr3 SCs in high-performance gamma-ray and X-ray detection.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507081
Coal chemical waste salt, a solid residue from evaporative crystallization of high-salinity wastewater, poses significant environmental risks and challenges for resource utilization due to its complex composition. This study systematically analyzes its composition and environmental hazards, highlighting its typical "mixed salt" nature and the potential threats of organic pollutants and heavy metals to soil, water, and ecosystems. It reviews mainstream treatment pathways, including organic degradation, inorganic impurity removal, and salt separation, with a focus on the resource utilization of sodium chloride and sodium sulfate and their industrial prospects. The current pollution control technical specifications and product quality standards are examined, comparing the scope and technical points of relevant standards such as the "Technical Specification for Pollution Control of Chemical Waste Salt." Finally, countermeasures are proposed to address challenges including difficult treatment of mixed salts, insufficient resource utilization incentives, and incomplete standard systems, emphasizing technological innovation, policy guidance, and standard improvement.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508021
Coal chemical industry waste salt, generated from high-salinity wastewater treatment, poses a bottleneck for green transformation under the 'dual carbon' strategy due to its low value and high complexity. This study investigated a typical coal chemical industrial park in Northwest China, using principal component analysis (PCA) on actual waste salt samples to identify pollutant characteristics and assess resource utilization potential. Results showed total organic carbon (TOC) ranged from 707.9 to 7,737.9 mg·kg⁻¹, with benzo(a)pyrene concentrations frequently exceeding the limits of the 'Identification Standards for Hazardous Wastes' (GB 5085.3). Hardness ions and metal ions also surpassed relevant product standards. PCA classified the waste salts into three types: sodium sulfate type, sodium chloride type, and high-complexity mixed salt, each corresponding to distinct resource utilization pathways. The study proposes differentiated technical routes based on PCA classification, providing a feasible reference for classified management and technology selection. This research supports the national policy of 'harmless pretreatment + resource utilization' for waste salt, contributing to green and high-quality development of the coal chemical industry.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3834-x
Lithium metal anodes face critical barriers to practical application due to dendritic growth and interfacial instability, which cause short cycle life and safety hazards. This work introduces a highly stable and ultrahigh-rate lithium metal anode using a lithiophilic Sm2S3-modified carbonaceous host. The in situ formation of a Li2S-reinforced interphase layer enables highly reversible lithium plating/stripping and uniform deposition. The modified anode achieves an ultrahigh rate capability of 20 mA cm−2 and ultralong cycling stability of 7440 cycles with dendrite-free morphology. In a 4.5 V anode-less Li||LiCoO2 cell with an areal capacity of ~1.93 mA h cm−2, the system sustains over 1100 cycles with 87.2% capacity retention under harsh conditions: an ultralow negative-to-positive capacity ratio (N/P) of ~0.26 and lean electrolyte of ~5 g Ah−1. Furthermore, an anode-less pouch cell with an ultrahigh areal capacity of ~6.01 mA h cm−2 delivers superior cycling performance even at an ultra-low N/P ratio of ~0.71 and ultra-lean electrolyte of ~1 g Ah−1, achieving a high energy density of 505 Wh kg−1. This work provides a scalable and effective strategy for advancing reliable, practical lithium metal batteries.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030305
The rapid expansion of livestock and poultry farming has intensified the challenge of managing sludge, which contains heavy metals (primarily Cu and Zn), antibiotics, and pathogens. Calcium carbide slag (CCS), an alkaline industrial waste rich in Ca(OH)2, CaCO3, and other minerals, poses environmental risks due to its high alkalinity. This study investigates the speciation transformation of heavy metals in biochar derived from co-pyrolysis of livestock sludge and CCS under varying temperatures (400–700 °C) and mixing ratios (sludge:CCS = 1:1, 2:1, 3:1, 4:1). The results demonstrate that at 600 °C and a 2:1 mixing ratio, calcium-based compounds and SiO2 in CCS effectively immobilize heavy metals through crystal solid solution and complexation, reducing their ecological risk. Sequential extraction indicated a shift from exchangeable and reducible fractions to residual fractions, with the residual fraction of Cu and Zn increasing by up to 45% and 38%, respectively, compared to sludge-only pyrolysis. The formation of apatite phosphorus (Ca5(PO4)3OH and Ca3(PO4)2) enhances the bioavailability of phosphorus in the biochar, making it a potential slow-release fertilizer. The study provides a novel strategy for the synergistic treatment of livestock sludge and CCS, offering environmental and economic benefits by producing stable, nutrient-rich biochar while mitigating heavy metal toxicity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3774-3
Lithium-air capacitor batteries (LACBs) integrate the rapid charge-discharge capability of supercapacitors into conventional lithium-oxygen batteries, significantly enhancing power density. However, their cycling stability remains unsatisfactory. In this study, we incorporated redox mediators (RMs) into an LACB featuring a dual-cathode configuration. This design facilitates sustained electron transfer between the electrode and Li2O2/Oxygen, thereby delaying RM deactivation caused by electrode passivation and improving overall electrochemical performance. The RM-enhanced battery achieved over 250 cycles at 2 mA cm−2 with a limited capacity of 0.5 mAh cm−2, while exhibiting a 0.54 V reduction in charging voltage at 0.1 mA cm−2 compared to the RM-free system. Furthermore, application of an aluminum foil sealing technique enabled a power density of 13.8 mW cm−2 at 6 mA cm−2, overcoming mass transport limitations inherent in open-cell configurations. We also investigated the influence of oxygen barrier films with varying barrier capabilities on LACB performance. Results indicate that films with superior oxygen resistance better maintain a clean capacitor electrode surface, thereby providing more stable electron supply to the RMs and enhancing rate capability and cycling performance. These findings underscore the potential of redox mediators in improving the performance and longevity of LACBs, offering a promising strategy for their future development.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607009
Resource utilization of food waste is a key measure for implementing waste classification and constructing zero-waste cities in China. However, the technical route based on anaerobic digestion currently faces developmental bottlenecks. In this study, engineering-scale facilities located in Northeast, North, Northwest, and Southeast China were selected, and material flow analysis was employed to comprehensively assess the current status of anaerobic digestion of food waste. The results indicated that, during the pretreatment stage, both leachate and organic slurry from all surveyed regions exhibited high COD/TN ratios, and the leachate contained high concentrations of lipids. Following three-phase (oil-water-solid) separation, the oil recovery rate could reach over 98%. Anaerobic digestion of each ton of food waste from the four regions generated approximately 70 to 80 Nm³ of biogas, while simultaneously producing liquid digestate accounting for 69% to 80% of the total mass and solid digestate accounting for 2.7% to 3.6%. However, the annual continuous production of digestate was not aligned with the seasonal demand for land use, thereby restricting the pathway for resource utilization. Converting food waste into an external carbon source can significantly enhance its resource utilization efficiency, with the economic benefits increasing by more than 203% compared to the methanogenesis pathway. The selection of the carbon source production technology route should be comprehensively determined by taking into account factors such as the specific nitrogen removal requirements of the target wastewater treatment process, the quality requirements for the carbon source products, and the substitution rate of commercial carbon sources.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60762-1
The CO2 dry reforming of methane (DRM) is pivotal for CO2 utilization within the dual-carbon framework, offering advantages in carbon reduction and value-added chemical production. However, shaped catalysts suitable for industrial-scale DRM remain limited. This work constructs a monolithic catalyst using honeycomb cordierite as the structural support, systematically investigating the effects of organic and inorganic binders on coating structure and catalytic performance. Comparative studies reveal that the active coating fabricated with inorganic aluminum sol exhibits a continuous uniform morphology and excellent adhesion strength. During high-temperature calcination, elemental diffusion within Al2O3 networks bridges the cordierite surface with active catalyst particles, forming a (Ni-Mg)AlxO4 composite structure. This creates robust metal-support interactions between active sites and the residual alumina matrix. The interconnected mesoporous framework provides superior pore confinement, contributing to strong coating adhesion, enhanced activity, and improved resistance to carbon deposition in the monolithic m-NCM-Al-sol catalyst. In contrast, coatings derived from inorganic silica sol suffer from detachment and activity loss due to heterogeneous surface structures and poor adhesion. Organic binders demonstrate inferior performance in macroscopic coating uniformity, adhesion strength, mesoporous confinement, and localized electronic effects, resulting in the poorest catalytic performance. By optimizing aluminum sol coating parameters—binder content, active component dosage, and coating cycles—a synergistic balance between coating thickness and mass transfer is achieved. The optimized catalyst demonstrates excellent DRM performance, providing insights for constructing high-performance shaped catalysts with cordierite coatings.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3510-0
The activity and stability of single-atom catalysts (SACs) are intimately associated with the structure of supports. Herein, by employing a van der Waals (vdW) heterostructure support, we construct a highly active and durable Pt SAC for hydrogen evolution reaction (HER). The unique support consists of monolayer MoS2 attaching on hierarchical N-doped carbon nanocages (hNCNC), on which Pt presents as individual single atoms on the hNCNC and as island-like single-atom layers on the MoS2. The optimized Pt1-MoS2/hNCNC demonstrates low overpotential (11 mV at 10 mA cm−2) and high mass activity (5.6 A mgPt−1 at −20 mV) in 0.5 M H2SO4 solution, outperforming commercial Pt/C. Impressively, the Pt1-MoS2/hNCNC exhibits improved long-term stability in proton exchange membrane water electrolyzer relative to commercial Pt/C. The excellent HER performance is attributed to the regulated electronic structure, robust interaction of Pt atoms with MoS2/hNCNC and facilitated charge transfer. This study establishes an innovative strategy to develop a highly active and durable Pt SAC using vdW heterostructure supports.