SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4359-0
Organic solar cells (OSCs) require cathode interlayers (CILs) that combine high charge transport, defect passivation, and thickness insensitivity for scalable manufacturing. Here, we report the synthesis of a novel A-D-A-A'-type polymer, PDPP2F-NDI-N, via the green and efficient direct arylation polymerization (DArP) method. The multiple electron-deficient units in the backbone confer strong electron-withdrawing character, effective work function modulation, enhanced built-in potential, high crystallinity, and ordered molecular packing. PDPP2F-NDI-N exhibits a high electron mobility of 1.01 × 10⁻³ cm² V⁻¹ s⁻¹ and electrical conductivity of 3.13 × 10⁻³ S m⁻¹, facilitating efficient charge extraction and transport. Its interfacial modification capability suppresses interfacial defects and reduces non-radiative recombination losses. In ternary OSCs, PDPP2F-NDI-N achieves a high power conversion efficiency (PCE) of 20.44%, with outstanding thickness insensitivity retaining 92.8% of peak PCE at a 30 nm CIL thickness, and a T80 lifetime exceeding 1700 hours under photo-thermal aging. This work demonstrates that poly(A-D-A-alt-A') backbone design combined with DArP synthesis provides an effective strategy for developing high-performance, thickness-insensitive, and stable polymeric CILs, advancing efficient, stable, and scalable OSC applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506031
The production of activated carbon from waste biomass such as cyanobacteria from Lake Taihu represents a promising resource utilization route. However, existing studies are mostly confined to laboratory scale, and the gap between laboratory processes and industrial production hinders the evaluation of technical feasibility and economic viability. This study optimized the process for producing cyanobacteria-based columnar activated carbon by co-processing cyanobacteria with garden waste (sawdust), and validated the process on an engineering-scale production line with a daily capacity of 5 t of raw materials. Economic feasibility was also assessed. Results showed that the optimized activated carbon exhibited a particle strength of 91.3% and a specific surface area of 571.44 m2·g−1. The engineering-scale line processed 5 t of raw materials daily, yielding approximately 1.18 t of activated carbon with stable quality: strength of 94.3% and specific surface area of 471.42 m2·g−1, featuring a microporous-dominant structure with coexisting micropores and mesopores. Cost analysis indicated a production cost of 3,595.65 CNY per ton of activated carbon, demonstrating favorable economic benefits. This work provides a basis for larger-scale production and application of cyanobacteria-based activated carbon.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024100805
A fluorescent metal-organic framework (MOF), PCN-128, was synthesized via a solvothermal method using zirconium tetrachloride (ZrCl4) as the metal source and tetrakis[4-(4'-carboxyphenyl)phenyl]ethylene (H4ETTC) as the organic linker. The resulting material exhibited regular morphology, high crystallinity, strong luminescence, and good stability. PCN-128 was employed as a fluorescent probe for the trace detection of malachite green (MG), a banned veterinary drug, in aquaculture water and freshwater fish tissue. The probe demonstrated exceptional selectivity toward MG among 13 veterinary drugs and robust anti-interference performance against 16 anions, 16 cations, and 12 additional veterinary drugs. The method achieved a broad linear detection range from 0.0 to 7.0 μmol·L−1 with a limit of detection (LOD) of 2.73 nmol·L−1. Spike-and-recovery experiments in three aquaculture water samples and one freshwater fish sample yielded recoveries between 89.80% and 113.7%, with relative standard deviations (RSD) not exceeding 2.59%. These results confirm that the developed method is accurate, reliable, and suitable for routine monitoring of MG residues in aquaculture water and aquatic products, addressing a critical gap in food safety surveillance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3819-7
Selective solar-driven aerobic oxidation of biomass derivatives into valuable chemicals under ambient conditions is pivotal for sustainable chemical manufacturing but faces challenges from the conflict between O2 activation kinetics and selective C–H bond cleavage. This work demonstrates a spatial decoupling strategy in a precisely-engineered 2D/2D g-C3N4/ZnIn2S4 architecture, where ZnIn2S4 domains selectively activate O2, while adjacent g-C3N4 modulates electron transfer to O2 and tailors 5-hydroxymethylfurfural (HMF) binding configuration for selective C–H bond cleavage. This enables efficient selective conversion of HMF to 2,5-diformylfuran (DFF) via ambient aerobic photooxidation. When used alone, ZnIn2S4 produces mixed reactive oxygen species (·O2−/·OH) due to uncontrolled electron transfer during O2 activation. In-situ spectroscopy, Kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations demonstrate that the 2D/2D heterojunction, driven by its directed electric field, selectively activates O2 into ·O2− at ZnIn2S4 domains while suppressing ·OH generation by moderate electron transfer, mitigating over-oxidation. Adjacent g-C3N4 domains precisely anchor HMF via –OH group interactions, steering selective DFF formation. This spatial decoupling achieves a remarkable HMF-to-DFF photo-conversion rate of 1517.5 μmol g−1 h−1 with 99.4% selectivity under ambient air, outperforming many reported state-of-the-art catalysts and maintaining durable cycling performance. The work establishes a spatial decoupling principle to overcome O2 activation kinetics and site competition thermodynamics, paving the way for advanced catalyst design for sustainable energy and the environment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509124
To reveal the spatiotemporal evolution and driving mechanisms of water quality in the Hanjiang River Basin, this study utilized monthly water quality monitoring data from 54 sections from January 2021 to April 2024. Methods including single-factor index, comprehensive water quality index (WQI), principal component analysis (PCA), and optimal parameters-based geographical detector (OPGD) were employed. Results indicated significant spatiotemporal differences, with total nitrogen (TN), chemical oxygen demand (COD), and permanganate index (CODMn) as major pollutants, TN being the most critical. Temporally, agricultural non-point source organic pollution dominated in wet season, while comprehensive organic pollution with industrial point source characteristics prevailed in dry season. Spatially, water quality deteriorated along the main stream, with tributary downstream areas showing severe pollution, forming a pattern of 'mountainous areas good, plains poor'. OPGD revealed combined effects of natural conditions and human activities, proposing a 'zonal control and targeted treatment' strategy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3809-y
The development of hydrogels that simultaneously achieve high strength and good toughness remains a critical challenge in soft material science, particularly for applications in flexible electronics, soft robotics, and biomedical devices. Conventional approaches often suffer from a trade-off between mechanical robustness and functional performance. In this work, we present a novel solvent-driven dual-network entanglement strategy to fabricate a strong and tough poly(vinyl alcohol) (PVA)-based organo-hydrogel by synergistically combining isopropanol (IPA) solvent substitution to induce dense polymer chain entanglement and a sodium alginate (SA) ionic crosslinked network as a dynamic energy-dissipation phase. The resulting organo-hydrogel exhibits excellent mechanical performance with a tensile strength of 3.18 MPa and a toughness of 16.65 MJ/m3, representing increases of approximately 17 and 49 times that of conventional PVA hydrogels, respectively. Furthermore, the organo-hydrogel displays superior swelling resistance and long-term stability in aqueous environments, enabling reliable operation in challenging conditions such as underwater motion sensing and wearable strain detection. Morphological analyses reveal the critical role of solvent-mediated chain reorganization and dual-network interactions in achieving these properties. This work not only provides a versatile platform for designing robust gel materials but also offers fundamental insights into solvent-network interactions for advanced soft material engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3979-3
The escalating prevalence of multidrug-resistant Pseudomonas aeruginosa (P. aeruginosa) infections necessitates novel antibacterial strategies. Here, we engineered lectin B (LecB)-targeted glyco-dots (TFP2F) via self-assembly of a photosensitizer (TFP2) possessing aggregation-induced reactive oxygen species (ROS) generation capability with fucose-modified tetraphenylethene glycoclusters (TPE-Fuc4), enabling P. aeruginosa-targeted antimicrobial photodynamic therapy and wound healing promotion. Three photosensitizers (TFP0–2) featuring an “A-D-A” electronic structure were synthesized, exhibiting broad absorption bands and near-infrared (NIR) fluorescence. Among these, TFP2 demonstrated superior Type-I/II ROS production (including ·OH, ·O2−, and 1O2), achieving potent phototoxicity against P. aeruginosa (MIC80 = 7.5 μM). Self-assembly with TPE-Fuc4 yielded glyco-dots TFP2F that facilitated LecB-mediated bacterial targeting, enhanced bacterial uptake, and significantly reduced the MIC80 to 2.5 μM against drug-resistant P. aeruginosa under light irradiation. In a murine P. aeruginosa-infected wound model, TFP2F treatment combined with light irradiation accelerated wound closure to <20% of the initial area by day 8 (vs. >40% in controls) and eliminated >95% of bacteria by day 2. This work presents a convenient strategy for constructing glyco-dots as a potent functionalized platform for precision, lectin-targeted antimicrobial photodynamic therapy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4057-4
The escalating use of ionizing radiation in medical and industrial applications necessitates lead-free, flexible, and sustainable shielding materials. Current development relies on empirical trial-and-error, which is inefficient. This study introduces a machine learning-assisted Monte Carlo simulation strategy for rapid optimization of metal filler compositions for X-ray attenuation across 40–120 kV. Guided by this AI-driven approach, polyvinyl alcohol (PVA)-based gels containing uniformly dispersed Bi/W/Gd2O3 nanoparticles were developed, forming within 1 minute at -20°C using a PVA-DMSO/H2O co-solvent system. The optimized gel with 50 wt% metal loading exhibits exceptional mechanical properties: tensile strength of 1.76 MPa, toughness of 6.3 MJ m−3, and elongation of 600%. It achieves >98% X-ray shielding efficiency at 5 mm thickness, outperforming lead composites at 120 kV. The physically cross-linked network provides recyclability and anti-freezing capability, retaining flexibility at -50°C. This work establishes a data-driven paradigm for designing high-performance radiation-shielding materials, demonstrating AI's potential to accelerate materials discovery and enable scalable fabrication of eco-friendly protective systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3439-7
Slot-die coating with halogen-free solvents is a promising scalable fabrication strategy for organic solar cells (OSCs). However, the complex interplay between long-timescale solute diffusion and microstructural evolution during the coating process remains poorly understood, limiting further optimization of morphology and device performance. In this study, we elucidate the critical role of solution viscosity in regulating phase separation and aggregation kinetics. Specifically, lower solution viscosity enhances solute diffusion, accelerating molecular aggregation while suppressing liquid-liquid phase separation (LLPS). Notably, we observe that in three different systems with varying crystallinity and immiscibility (PM6:Y6, PTQ10:Y6, and D18:Y6), the optimal processing conditions for peak device efficiency consistently correspond to a nearly identical solution viscosity (~0.8 mPa s), despite variations in optimal processing temperatures. In situ characterizations reveal that at this viscosity, all three systems exhibit constrained LLPS and rapid molecular aggregation, promoting the formation of finely structured, continuous nanoscale domains. These findings establish solution viscosity as a universal governing parameter for morphology control in printed active layers. By providing a fundamental framework for understanding viscosity-mediated phase separation, this work offers valuable insights for advancing high-throughput, environmentally friendly printing techniques for high-efficiency OSCs.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3437-6
Interfacial solar-driven vapor generation offers a sustainable route to freshwater, yet practical deployment is constrained by salt crystallization, high material costs, and thermal losses. This work reports a sandwich wettability structure (PNMF) comprising a polypyrrole-coated hydrophobic top layer, a hydrophilic melamine foam interlayer, and a tunable hydrophobic bottom layer. The PPy coating absorbs broadband solar radiation and retains heat in situ; the hydrophilic interlayer supplies water through interconnected microporous channels, forming confined water clusters that reduce evaporation enthalpy. The bottom layer's central hydrophobicity regulates water transport to balance supply and evaporation, while its hydrophobic edges provide self-floatability and minimize heat loss. Under 1 sun, the PNMF evaporator achieves 2.71 kg m−2 h−1 with ~90% solar-thermal conversion efficiency over 24 cycles. In 10 wt% NaCl simulated seawater, no salt crystals formed after 12 h, and the evaporation rate remained stable at 2.62–2.87 kg m−2 h−1 over 20 days. Under natural autumn sunlight (average irradiation <0.4 kW m−2, temperatures <24 °C), a portable device produced approximately 3 kg m−2 over 11 h, with purified water salinity below 0.14‰. The simple, low-cost design addresses salt accumulation and durability bottlenecks, offering a scalable pathway for decentralized freshwater production.