SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4472-0
Dynamic electrocardiography (ECG) monitoring during physical activity remains compromised by motion artifacts that corrupt signal fidelity, particularly with conventional gel electrodes whose impedance rises sharply under deformation. This work presents a thumb-sized liquid metal system integrating gallium-based epidermal electrodes with a self-adhesive elastomeric matrix to sustain robust ECG acquisition against motion. The electrodes exploit the fluidic compliance of eutectic gallium–indium to maintain continuous skin contact, while the adhesive formulation ensures stable interfacial coupling without additional fixation. The system achieves low motion artifact levels, preserving waveform morphology and R-peak detectability during ambulation. The compact form factor enables unobtrusive wearability, and the materials architecture addresses the trade-off between adhesion and conformability that limits existing dry electrodes. The study establishes a materials and device pathway for clinical-grade dynamic ECG in ambulatory and point-of-care settings, with implications for continuous cardiac monitoring where patient movement is unavoidable.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4395-x
Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4192-y
Electrochemical water splitting is pivotal for scalable green hydrogen production, yet its practical deployment hinges on cost-effective electrocatalysts with high activity and durability. This study introduces a low-cost, three-dimensional (3D) nanoporous ZrVFeCoNi material fabricated via chemical dealloying, at merely 0.16% of the cost of Pt. The structure-activity relationship between its microstructure and hydrogen evolution reaction (HER) performance was systematically explored. Lattice defect effects from multiphase intermetallic compounds, combined with multi-metal synergy, optimize H+ adsorption energy and electron transfer kinetics. The 3D nanoporous architecture provides a high electrochemical surface area with abundant active sites, enhancing electrolyte penetration and reducing interfacial mass transfer resistance. Consequently, the ZrVFeCoNi electrode exhibits outstanding HER performance, requiring only a 38 mV overpotential to reach 10 mA cm−2 and maintaining stable operation for 1000 h at 500 mA cm−2. Integrated into a full water electrolyzer (ZrVFeCoNi || IrO2/Ni), the system achieves a cell voltage of 1.60 V at a current density of 400 mA cm−2. Advanced characterization and density functional theory (DFT) calculations reveal that interfacial interactions and charge transfer at heterointerfaces drive catalytic activity, showcasing the potential of 3D nano-structured multiphase intermetallic compounds as high-performance electrocatalysts for green hydrogen systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3973-9
Circularly polarized luminescence (CPL) is a phenomenon where chiral molecules emit light with distinct left or right circular polarizations upon excitation. Unlike conventional luminescent materials, chiral materials produce light with inherent helicity, leading to unique applications in chiral optoelectronics, quantum technologies, and biophotonics. This review systematically explores the theoretical and computational foundations of CPL, focusing on the interplay between molecular chirality, transition dipole moments, and photoluminescence quantum yield. A major challenge in designing efficient CPL-active materials is optimizing the luminescence dissymmetry factor (g_lum) while maintaining high photoluminescence efficiency. This review comprehensively summarizes how first-principles computational methods, by establishing robust predictive frameworks, have significantly advanced the design of CPL molecules. Even though significant progress has been made in modeling monomeric systems, the effective integration of first-principles calculations to describe CPL in aggregated states remains an ongoing challenge. The review also highlights the promising synergy between computational models, experimental validation, and emerging data-driven techniques such as machine learning (ML) for guiding the design of novel high-performance CPL materials. In conclusion, further research is needed to overcome current computational limitations and develop more effective strategies for CPL material design.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040708
Bisphenol S (BPS), a substitute for bisphenol A (BPA), is widely used in food packaging, plastics, and dental fillings. BPS enters and accumulates in the human body via respiratory, digestive, and dermal routes, posing increasing health risks. Epidemiological and animal studies link BPS exposure to metabolic disorders. This review systematically summarizes BPS pollution status and its mechanisms in obesity, non-alcoholic fatty liver disease, diabetes, cardiovascular diseases, and immune system disorders. BPS detection rates reach 78.5% in food samples (up to 67.1 μg·kg−1) and 81.67% in fish (up to 65.31 μg·kg−1). In indoor dust, BPS levels reach 26.6 μg·g−1, with adult daily exposure estimated at 0.78 ng·kg−1 in China. Mechanistically, BPS disrupts lipid and glucose metabolism, induces oxidative stress and inflammation, and alters nuclear receptor signaling. The review highlights the need for molecular target identification and metabolic network interaction studies to develop intervention strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3946-2
High energy-density lithium–sulfur (Li–S) batteries with rapid intermediate conversion and forbidden shuttle effect require superior electrocatalysts with tunable catalytic activity. In this protocol, binary FeNi3 alloy nanoparticles homogeneously embedded within carbon nanosheets (FeNi3/CNS) are synthesized to regulate the conversions of sulfur species. Time of flight-secondary mass ion spectroscopy reveals a significantly improved catalytic effect of binary FeNi3 alloy compared to bare Ni, which is confirmed by a larger Li2S amount generated during in situ X-ray diffraction measurement. Further anode characterization validates efficient shuttling suppression and good lithium metal protection. In Li–S batteries, electrochemical tests demonstrate a remarkable rate capability of 852 mAh g−1 at 3.0 C, and outstanding long-term cycle at 1.0 C (639 mAh g−1 after 500 cycles). Even under a wide operation temperature range (−15–60 °C), Li–S batteries exhibit stable cycling with high specific capacities under high current rates. Moreover, Li–S batteries using FeNi3/CNS attain a maximum areal capacity of 5.60 mAh cm−2 under ~4.0 mg cm−2 sulfur. This study highlights the advantages of adopting binary or multi-component metal alloys as electrocatalysts and points out the research directions to advance Li–S batteries into practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4033-1
Photodetectors are critical components in modern optoelectronic systems, underpinning applications in optical communication, low-altitude economy, environmental monitoring, and national defense. Layered two-dimensional (2D) materials such as MoS2, WS2, black phosphorus (BP), and ReS2 have attracted extensive attention due to their remarkable electronic and optical properties, including facile mechanical exfoliation and tunable characteristics via thickness engineering. The absence of dangling bonds enables the construction of van der Waals (vdW) heterostructures free from lattice-matching constraints, promoting efficient charge transport, enhanced light absorption, and suppressed dark current. Among layered materials, semimetals such as graphene, PdTe2, MoTe2, and TaIrTe4 exhibit narrow or zero bandgaps, enabling ultrabroadband spectral responses from ultraviolet (UV) to terahertz (THz). ZrTe3, a layered gapless semimetal, demonstrates pronounced carrier transport features, including robust excitons and ultrafast carrier relaxation times, making it an ideal candidate for photodetection. However, pure ZrTe3-based photodetectors suffer from substantial dark current due to the absence of an energy bandgap, degrading signal-to-noise ratio and specific detectivity (D*). This work reports a high-performance broadband photodetector based on a ZrTe3/CuInP2Se6 heterostructure. By exploiting an asymmetric contact configuration that introduces a Schottky barrier, the device effectively suppresses dark current while enhancing photoresponse. The photodetector exhibits broad spectral sensitivity from UV to near-infrared (355–1177 nm), microsecond-level response speed, and high responsivity and specific detectivity. Beyond conventional photodetection, an optoelectronic information encryption-decryption application is demonstrated, where modulated light and bias voltage serve as dual input channels to encode and decode ASCII signals. This study resolves the challenge of high dark current in semimetal-based photodetectors and introduces a multifunctional platform for secure optoelectronic communication, highlighting the potential of ZrTe3 for next-generation photonic and quantum information technologies.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3620-x
Current clinical vitreous substitutes, including inert expansile gases, silicone oil, and perfluorocarbon liquids, are associated with complications such as emulsification, cataract formation, glaucoma, and inflammation, necessitating safer alternatives. This study reports a purely zwitterionic polymer hydrogel constructed entirely from carboxybetaine ureido acrylate (CBUIA) without covalent cross-linkers or non-zwitterionic segments. The hydrogel self-crosslinks via multivalent hydrogen bonding and dipole-dipole interactions, forming a supramolecular network of poly(carboxybetaine ureido acrylate) (PCBUIA). The PCBUIA hydrogels exhibit shear-thinning injectability and rapid self-healing, with density (1.016–1.021 g/cm³), refractive index (1.3359–1.3389), and transmittance (>90%) matching native vitreous. The zwitterionic hydration layer confers ultralow protein adsorption and suppresses cell attachment, with no foreign-body reaction or fibrotic capsule formation. After one month of implantation in rabbit eyes, the hydrogels maintained optical transparency, preserved retinal morphology, and did not elevate intraocular pressure or cause inflammatory responses. These findings demonstrate the potential of purely zwitterionic polymer hydrogels as vitreous substitutes, though further long-term in vivo studies are required to evaluate stability and functional performance.