SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4204-4
Heterodimensional superlattices, integrating materials of different dimensionalities (e.g., 0D, 1D, 2D) within a periodic structure, have attracted significant attention due to their unique electronic structures and emergent properties arising from inter-dimensional coupling. This review comprehensively summarizes the state-of-the-art preparation strategies, distinctive physical properties, and diverse applications of these emerging systems. Beyond conventional epitaxial growth and chemical intercalation methods, recent advances include van der Waals assembly and phase engineering, enabling precise control over layer stacking and interfacial interactions. Key properties discussed include tunable electronic band structures, enhanced spin-orbit coupling, and emergent phenomena such as the in-plane Hall effect, which are promising for spintronic devices. The review also highlights applications in energy storage and conversion, where heterodimensional superlattices exhibit improved ion transport and catalytic activity. Challenges remain in scalable fabrication and structural stability, but the field holds potential for next-generation electronics and energy technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3695-8
Sulfur-based lithium-ion batteries, particularly those employing sulfurized poly(acrylonitrile) (SPAN) cathodes and graphite (Gr) anodes, offer high theoretical capacity and low cost but suffer from temperature-dependent capacity decay. This study systematically investigates the electrochemical dynamics and capacity decay mechanism of SPAN||Gr pouch cells cycled at 25–55 °C. Multiscale analyses reveal that capacity fade arises from active lithium loss and increased resistance, both accelerated by higher temperatures. Active lithium loss is primarily attributed to dead lithium formation and thickening of the solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), while resistance increase is predominantly due to SEI/CEI thickening. As temperature rises, active lithium loss becomes the dominant decay factor. Leveraging the consistent decay mechanism across temperatures, an accelerated aging model based on the Arrhenius equation is developed: y = 0.9x + a. This model accurately predicts cycling parameters at specific temperatures and reduces testing time by 50% when extrapolating from 55 °C to 25 °C. These insights provide critical guidance for developing long-life sulfur-based batteries for practical energy storage applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112104
Carboxyl-modified polystyrene microplastics (PS-COOH) are negatively charged particles formed by surface oxidation and functional group modification of polystyrene microplastics (PS), widely used in biomedical and analytical chemistry. However, studies on their neurotoxic effects on aquatic organisms are scarce. This study employed zebrafish (Danio rerio) as a model organism, exposing embryos to environmentally relevant concentrations (0.1, 1, 10, 100 μg·L−1) of PS and PS-COOH. Neurotoxic effects were assessed by measuring tail coiling frequency at 24 hpf and swimming velocity under alternating light/dark cycles at 120 hpf. Results demonstrated that both PS and PS-COOH induced neurotoxicity, with PS-COOH significantly reducing tail coiling frequency and average swimming speed compared to PS (P<0.05). Exposure to 10 μg·L−1 PS-COOH disrupted neurotransmitter homeostasis, altering levels of acetylcholine (ACh), serotonin (5-HT), and γ-aminobutyric acid (GABA). Transgenic zebrafish Tg(huc:EGFP) fluorescence assays revealed that PS-COOH (0.1–100 μg·L−1) caused damage to central neurons. These findings indicate that PS-COOH exposure impairs cholinergic, serotonergic, and GABAergic neurotransmission, induces neuronal damage, and exerts neurotoxic effects on zebrafish larvae. This study provides a theoretical basis for assessing the ecological and health risks of modified microplastics.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604025
To meet the minute-level early-warning requirements for odor and multi-pollutant emissions at waste treatment facilities, this study proposed a multivariate short-term time-series prediction framework applicable to multi-tier scenarios covering source and boundary points (i.e., workshops and plant boundaries). Based on continuous online monitoring data with a 5-second resolution, a long short-term memory (LSTM) model using a sliding-window and recursive multi-step prediction strategy was constructed to jointly model odor concentration (OU) and pollutants including VOCs, NH3, H2S, and CH3SH (mg/m³). An evaluation protocol aligned with environmental supervision practice was established, incorporating mean absolute error (MAE), root mean square error (RMSE), goodness-of-fit (R²), skill scores (SS) relative to a persistence baseline, and threshold-based error stratification to characterize uncertainty during peak emission periods. The results showed that at workshop monitoring sites with relatively stable operating conditions, VOCs, NH3, H2S, and CH3SH exhibited a high goodness of fit and low prediction errors. In contrast, at boundary sites affected by plume arrival delays and diffusion-dilution non-stationarity, OU and VOCs displayed significantly amplified errors during peak episodes, and the skill score advantage over the baseline became unstable at certain sites. Stratified analysis consistently revealed that non-peak periods outperformed peak periods, indicating that event-driven fluctuations were the main sources of error. Accordingly, this study suggested incorporating exogenous variables such as wind speed and direction, ventilation and gate access control, and operational rhythms, along with peak-sensitive loss functions, into the model to enhance its capacity to characterize and provide early warnings for transient emission pulses. Overall, this study established a reusable methodological baseline and evaluation paradigm for minute-scale multi-pollutant prediction, providing quantitative support for the operational management and source-to-boundary coordinated control of waste treatment facilities.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3470-6
Inkjet printing of two-dimensional transition metal chalcogenides (TMDs) is promising for low-cost, large-scale flexible electronics, yet challenges persist due to poor crystallinity and toxic solvents. Here, we report a green ink formulation using zwitterionic cocamidopropyl betaine (CAB) as a dispersant and surfactant for liquid-phase exfoliation of single-crystalline TMDs in water and isopropanol (IPA). The dispersions contain no additives or binders, enabling direct production of stable (over one month) and concentrated (2 mg/mL) inks for MoS2, MoTe2, WS2, WSe2, and WTe2. Fully-printed MoSe2/CAB humidity sensors exhibit superior sensitivity (ΔI/I0 = 468.1) and rapid response/recovery times (27 s/0.42 s) under bending. Inkjet-printed WTe2/CAB pads on 6-μm-thick substrates demonstrate exceptional mechanical stability, with resistance variations of 1.4% under single bending and 2% after 1,000 cycles, and acquire high-quality electrocardiogram (ECG) and electromyography (EMG) signals. This strategy enables scalable fabrication of TMD-based flexible electronics, advancing industrial integration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3882-y
Organic semiconductor crystals with well-defined morphologies are highly desirable for high-performance optoelectronic devices, yet precise control over their growth remains a challenge. Here, a novel donor-acceptor (D-A) molecule, TQDPT, has been successfully developed, featuring a rigid π-conjugated acceptor core composed of thiazoloquinoxaline and naphthalene, coupled with phenylphenothiazine donors. This study presents a temperature-mediated crystallization strategy for precisely controlling the morphology and carrier transport properties of TQDPT single crystals. By systematically investigating the growth kinetics across a controlled temperature range (15–35°C), we reveal a distinct transition from needle-like structures to plate-like crystals, with tunable average widths spanning from around 2.8 to 30.1 μm. This morphological evolution is driven by temperature-dependent molecular diffusion and nucleation kinetics. Significantly, the plate-like crystals grown at 25°C exhibit an order-of-magnitude enhancement in mobility compared to needle-like counterparts, while higher temperatures of 35°C yield broader crystals with improved carrier mobility and device stability. This work highlights the critical role of temperature as a pivotal parameter in the dimensional and electronic optimization of organic crystals, offering an attractive approach to optimize functional materials for advanced optoelectronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3752-0
Counterfeit products have become widespread, necessitating advanced anti-counterfeiting solutions. Inspired by random wrinkles on peanut surfaces, we propose a biologically physical unclonable function (PUF) label with all-optical anti-counterfeiting. Using spatially selective plasma etching, a single-material random wrinkling strategy overcomes limitations of traditional double-layer wrinkling, such as low entropy and complex processes, enabling selective wrinkling in fixed areas. Innovative introduction of dual-modal luminescent micron defects in polydimethylsiloxane (PDMS) films enables orthogonal control and coordination of the frequency domain of unpredictable wrinkles at the mesoscopic scale, promoting transition from long-range anisotropy to short-range isotropy. Verification requires only simple optical equipment, providing cost-effectiveness and ease of detection. This anti-counterfeiting system incorporates three collaborative security mechanisms: (i) high-entropy PUF encoded wrinkle fingerprints, (ii) angle-sensitive Bragg-like structural colors, and (iii) spatially segmented dual-mode fluorescence. The label exhibits near-ideal cryptographic properties: uniformity close to 0.5, Shannon entropy close to 1, Hamming distance approximately 0.5, and robust environmental stability (similarity >84% after storage at 2°C and 50°C for 48 h). Plasma parameter modulation enables continuous tuning of wrinkle wavelength from 6.1 to 25.0 μm. The system's straightforward preparation, portable verification, and anti-spoofing capabilities position it for real-world applications in secure packaging, high-value product labels, and smart encryption, with potential extension to flexible electronics and wearable security systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030501
Coastal areas serve as critical ecological interfaces for the migration of terrestrial microplastics (MPs) into the ocean, and characterizing their pollution is essential for integrated coastal management. This study investigated the occurrence, sources, and ecological risks of MPs in surface waters of nearshore areas and river estuaries around Hainan Island, a typical tropical tourist island. MPs abundance ranged from 316.67 to 1300 n·m−3 in seawater and from 400 to 5416.67 n·m−3 in river water. In seawater, the dominant polymer was polyethylene terephthalate, with fibers being the predominant shape, size class 500–1000 μm, and white/transparent color. In river water, polypropylene-ethylene copolymer dominated, also as fibers, but with size class 100–500 μm and white/transparent color. Seawater MP abundance showed a significant positive correlation with tourist numbers, and distribution across functional areas followed: tourism areas > natural areas > aquaculture areas > residential areas. Multiple correspondence analysis identified household plastic waste, laundry wastewater, aquaculture, and fishery products as primary sources of seawater MPs. Principal component analysis indicated homologous characteristics between seawater and river MPs, suggesting rivers are a major pathway for terrestrial MP transport to coastal zones. Ecological risk assessment revealed low pollution loads, with potential ecological risks moderate for seawater and medium-low for river water. Notably, 15% of seawater sampling sites exhibited polymer risk level Ⅳ, primarily driven by polyacrylonitrile's high biological toxicity. These findings provide a scientific basis for developing MP pollution control strategies in Hainan Island.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60615-3
Co-pyrolysis of oil-rich coal and biomass is a promising route to enhance oil and gas production, yet the underlying synergistic mechanisms remain poorly understood. This study investigates the effect of hydrothermal pretreatment (HTP) on the co-pyrolysis of Huangling coal (H) and enzymatic hydrolysis lignin (E). Raw and pretreated samples were characterized via proximate/ultimate analysis, SEM, ICP-OES, and 13C-NMR. Fixed-bed pyrolysis experiments were conducted to evaluate synergistic performance. Results show that HTP reduces oxygen content, develops pore structure, and increases concentrations of inorganic metal ions (Ca, K, Fe) in the aqueous phase. Structural modifications bring the carbon skeleton of E closer to that of H, with increased bridge carbon ratio and improved thermal stability, aligning pyrolysis temperature ranges. For the H/E blend (8:2) after 24 h HTP, tar yield increases by 80.52% compared to untreated blend, with significant rises in aliphatic compounds and monocyclic aromatic hydrocarbons. Gas yields of H2, CO, and CH4 increase by 5.47%, 10.98%, and 9.27%, respectively, while CO2 and pyrolysis water generation are inhibited (water yield decreases by 93.98%). Semi-coke pore structure becomes more developed. The enhanced synergistic effect is attributed to a multi-fold mechanism of 'component interaction-structural modification-catalytic cracking'. These findings provide theoretical support for developing technologies to improve co-pyrolysis of oil-rich coal and biomass, advancing low-carbon, high-quality utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3941-2
The precise and directed assembly of multicomponent aggregates remains a central challenge in materials chemistry, particularly the integration of neutral clusters. This study introduces a 'cation-mediated co-crystallization' strategy to overcome electrostatic assembly barriers between neutral aluminum molecular rings and polyoxometalates (POMs). By controllably functionalizing the rings with cationic moieties, the approach bypasses traditional 'ion-pair' limitations, enabling incorporation of diverse neutral clusters. The strategy exhibits structural extensibility, with cationic sites adjustable on ring exteriors or interiors, and potential extension to various polyanionic systems. The resulting hybrid materials demonstrate outstanding solution processability. When incorporated as dielectric dopants in a polymer matrix, they achieve a synergistic '1+1>2' effect: aluminum rings contribute high capacitance density (~11.19) and low dielectric loss (~0.03), while POMs provide high breakdown strength (~740 MV m−1). This work establishes a paradigm for directed macroscopic functional assembly via molecular-level cluster interaction 'encoding'.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510017
Municipal solid waste (MSW) is a significant source of urban carbon emissions. This study integrates life cycle assessment (LCA) and system dynamics (SD) to construct a multi-subsystem LCA-SD model covering economy, population, waste generation, transportation, treatment, and resource utilization, using Fuzhou City as a case study. The model was validated against historical data and uncertainty analysis. Carbon emissions from MSW transportation, treatment, and resource utilization during 2013–2023 were calculated, and emission trends under seven reduction scenarios for 2024–2035 were predicted. Results show that Fuzhou's MSW treatment evolved through three stages: 'landfill+incineration', 'treatment structure adjustment', and 'incineration+kitchen waste resource utilization', corresponding to emission growth, fluctuation, and reduction periods. In 2023, total net carbon emissions were 1.07×10^6 t CO2-eq, with incineration being the largest contributor (9.93×10^5 t), followed by transportation (2.93×10^4 t), leachate treatment (2.14×10^4 t), and kitchen waste treatment (7.90×10^3 t, negative emission). Scenario analysis indicates that without further measures, carbon neutrality cannot be achieved. Synergistic enhancement of kitchen waste separation and incineration power generation efficiency can significantly boost reduction, potentially achieving carbon neutrality by 2032. The study provides a dynamic accounting and scenario assessment framework for low-carbon transition of urban solid waste systems.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60676-7
Landfilled municipal solid waste (MSW) in China exceeds 8 billion tons, with high moisture (30–50%) and ash content (>50%), complicating conventional treatment. Slag gasification offers a clean and resource-oriented route, but heavy metal leaching from the resulting slag poses environmental risks. This study investigates the effect of rice husk addition (5–15%) on the vitrification of landfilled-waste slag and the immobilization of heavy metals (Cr, Zn, Cu). Results show that adding 5–10% rice husk lowers the slag flow temperature to a minimum of 1213 °C, attributed to active SiO2 reacting with CaO and Fe2O3 to form low-melting eutectics like anorthite. Leaching concentrations of Cr and Zn decrease from 41.60 and 108.00 mg/L to 5.89 and 7.10 mg/L, respectively, with 10–15% rice husk. The amorphous SiO2 enhances silicate polymerization (Q3, Q4 networks), promoting physical encapsulation and chemical incorporation of heavy metals into stable phases such as Zn2SiO4 and CuFe2O4, increasing the residual fraction and reducing bioavailability. At temperatures >1400 °C, volatilization of Cu and Zn increases, with residual rates dropping to 33–60% and 31–55%, respectively, while Cr remains stable (70–123%). This work elucidates the mechanistic role of rice husk in slag structure modulation and heavy metal immobilization, providing a theoretical basis for the co-treatment of landfilled waste and biomass via a 'treating waste with waste' strategy.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60663-9
The catalytic hydrogenation of biomass-derived dimethyl succinate (DMS) to 1,4-butanediol (BDO) is a pivotal route for producing high-value C4 chemicals in green chemistry. Cu/SiO2 catalysts are known for high selectivity in hydrogenating ester groups, with performance correlated to copper species microstructure. Although calcination critically defines this active structure, systematic influence of calcination atmosphere remains underexplored. Here, Cu/SiO2 catalysts were prepared via urea-assisted hydrothermal method and calcined under different atmospheres to elucidate effects on physicochemical properties and hydrogenation performance. Comprehensive characterization (N2 physisorption, FT-IR, H2-TPR, XRD, TEM, N2O pulse chemisorption, XPS, NH3-TPD) revealed that calcination atmosphere profoundly alters metal-support interaction, regulating dispersion and chemical state of copper species. Specifically, air calcination promoted stronger metal-support interaction, enhancing copper dispersion and increasing proportion of key active Cu+ species. Consequently, air-calcined catalyst achieved 92.37% DMS conversion and 64.15% BDO yield under optimized conditions (210 °C, 5.0 MPa, WHSV 0.6 h−1, H2/DMS molar ratio 100). This work underscores calcination atmosphere engineering as potent strategy for optimizing metal-support interactions in heterogeneous catalysts for efficient hydrogenation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4216-7
Flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are promising for lightweight and mechanically pliable photovoltaics, yet their performance is limited by severe non-radiative recombination and residual stress. Here, we report a sealed constant temperature (SCT) annealing strategy that simultaneously optimizes the CZTSSe/CdS heterojunction and alleviates stress. Under uniform mild thermal conditions (85°C, 5 h), SCT annealing promotes gradient diffusion of Cd2+ into the absorber, partially substituting Zn2+, which optimizes band alignment, passivates interface defects, and suppresses near-interface CuZn defects. This reduces open-circuit voltage loss and improves fill factor. The flexible device achieves a power conversion efficiency of 13.07%, a significant improvement over the reference (12.1%). The SCT strategy also enhances mechanical flexibility by reducing residual stress. Our findings provide a controllable route to advance both efficiency and flexibility of flexible CZTSSe solar cells.