SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4242-1
Infected bone defects remain a formidable clinical challenge due to the coupled pathologies of bacterial infection and impaired osteogenesis. Conventional treatments often fail to address the dynamic microenvironment, leading to persistent infection and inadequate bone repair. Here, we report a microenvironment-adaptive hydrogel incorporating a Ti3C2Tx MXene-based coordination nanoreactor that orchestrates an immune-osteogenic cascade. The nanoreactor, constructed by coordinating Fe3+ ions onto MXene nanosheets, exhibits pH- and reactive oxygen species (ROS)-responsive release of Fe3+ and MXene, enabling sequential antibacterial and pro-osteogenic activities. In vitro studies demonstrated that the hydrogel eradicated Staphylococcus aureus and Escherichia coli (>99.9% killing) within 6 h via synergistic photothermal and chemodynamic effects, while simultaneously scavenging excess ROS to mitigate oxidative stress. Notably, the released Fe3+ ions promoted M2 macrophage polarization, as evidenced by a 2.5-fold increase in CD206 expression, and subsequently enhanced osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), with alkaline phosphatase activity elevated by 1.8-fold and alizarin red staining intensity increased by 2.2-fold. In a rat model of infected calvarial defects, the hydrogel significantly accelerated bone regeneration, achieving a bone volume fraction of 78.4% at 8 weeks post-implantation, compared to 35.2% in the untreated control. Micro-CT and histological analyses confirmed robust new bone formation and complete infection clearance. This study presents a paradigm for designing adaptive biomaterials that integrate infection control and bone regeneration, offering a promising strategy for treating infected bone defects.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4385-1
Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3648-2
Transient energy storage devices represent an emerging class of biodegradable power systems that provide temporary energy for implantable medical electronics before safely degrading in vivo. From early transient primary batteries to contemporary rechargeable batteries integrated with wireless charging systems, these devices have evolved to enable stable prolonged power supply. Through rational transient design and structural engineering, they achieve desirable electrochemical performance, tunable degradation rates, and mechanical compatibility with soft, irregular, and dynamic biological tissues. This work provides a critical review of state-of-the-art transient energy storage devices, including transient primary batteries, transient secondary batteries, and transient supercapacitors, with emphasis on their electrodes, electrolytes, encapsulation materials, fabrication processes, and applications. We critically analyze material selection strategies, transient design principles, and architecture design for various transient batteries and capacitors. Finally, we discuss existing challenges and outline future directions to guide the clinical translation of biodegradable power solutions for biomedical implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3616-8
Negative stiffness (NS) structures exploit multi-stable mechanisms to achieve energy absorption, yet their practical application is limited by material and manufacturing constraints that compromise load-bearing capacity, reusability, and energy absorption efficiency. This study addresses these limitations by employing continuous carbon fiber reinforced thermoplastic polymers (CCFRTP) and three-dimensional (3D) printing to fabricate NS structures with cosine beam cells. A wet twisting method for continuous carbon fiber (CCF) was developed to enhance mechanical properties and elucidate failure behaviors and interfacial adhesion mechanisms. The resulting CCF/PLA/PVDF composites exhibited significant improvements in mechanical properties compared to untreated counterparts, with failure analysis revealing characteristic fiber breakage due to enhanced interfacial adhesion, as opposed to fiber pull-out and irregular fracture in untreated samples. A one-stroke path planning model was used to investigate bistability principles and energy absorption mechanisms. Displacement-controlled loading/unloading experiments assessed energy absorption in both energy-locked and repetitive modes. A dual-unit assembly structure was fabricated to validate the feasibility of a negative stiffness honeycomb structure. Composite layup simulations via Abaqus confirmed the deformation process and energy absorption mechanisms. The findings demonstrate that CCFRTP-based NS structures offer considerable potential for large deformation energy absorption applications in aerospace and naval fields.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60613-X
This study systematically optimized the preparation of Co-modified Ce/TiO2 catalysts and investigated the effects of preparation method and Co loading on their low-temperature denitrification activity. The sol-gel method with a Co/Ti mass ratio of 0.025 (Ce-Co0.025/TiO2-SG) yielded superior performance compared to impregnation and co-precipitation methods. The catalyst maintained NO conversion above 95% in the 225–350 °C range and exhibited high N2 selectivity. Characterization via BET, XRD, XPS, H2-TPR, and in situ DRIFTS revealed that the enhanced activity was attributed to abundant surface oxygen vacancies, a high proportion of Ce3+ species, and prominent acidic sites. The catalyst followed the Eley-Rideal mechanism, effectively inhibiting nitrate intermediate formation and promoting NO-to-NO2 oxidation. This work provides a reference for developing efficient low-temperature denitrification catalysts for industrial applications such as cement production, which emitted 722,000 tons of NOx in 2020, accounting for 17.3% of industrial emissions.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225200
Phosphogypsum, a by-product of wet-process phosphoric acid production, poses severe environmental and safety challenges due to its massive annual output and stockpiling. This study addresses the urgent need for resource utilization by employing phosphogypsum as the primary raw material, supplemented with ground granulated blast furnace slag, fly ash, and type II anhydrite. Two foaming agents, sodium bicarbonate (NaHCO3) and aluminum powder, were used to regulate pore structure, and their effects on ceramsite performance were compared. Under identical preparation conditions, aluminum powder yielded higher 7-day cylinder compressive strength than NaHCO3. Optimal formulations achieved a maximum cylinder compressive strength of 6.5 MPa with a bulk density of 1020 kg/m3, meeting lightweight aggregate concrete strength requirements. Aluminum powder produced closed pores, reducing bulk density to as low as 765 kg/m3, while NaHCO3 generated interconnected pores leading to higher water absorption. XRD, SEM, and BET analyses revealed that strength-contributing phases are calcium silicate hydrate and calcium aluminate hydrate; trace heavy metals (Mo, Ti) hinder their formation, causing structural defects. This work demonstrates a green, non-fired route for phosphogypsum valorization, offering environmental and economic benefits and a pathway for large-scale utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4043-3
In-plane InAs nanowires and nanowire networks are promising platforms for electronics, optoelectronics, and topological quantum computing due to their small electron effective mass, narrow bandgap, high electron mobility, strong spin-orbit coupling, and large Landé g factor. However, their selective area growth on CMOS-compatible group-IV substrates remains challenging. Here, we report the selective area growth of high-quality in-plane InAs nanowires and nanowire networks on Ge(111) substrates by molecular-beam epitaxy. Conventional selective-area epitaxy fails to simultaneously achieve good selectivity and continuity. To overcome this, we developed a metal-sown, single-indium-source two-step growth method, which attains both selectivity and continuity but yields nanowires with rough surfaces and lengths below 10 μm. We then introduced an upgraded metal-sown, dual-indium-source two-step growth method, successfully fabricating in-plane InAs nanowires and nanowire networks with smooth surface morphology and lengths exceeding 60 μm. By optimizing the As beam equivalent pressure, overgrowth at network junctions is effectively suppressed, resulting in uniform nanowire networks. High-resolution transmission electron microscopy and Raman spectroscopy confirm the high-quality single-crystalline nature and pure zinc-blende structure of the nanowires and networks. This work establishes a foundation for fabricating high-quality in-plane InAs/superconductor hybrid nanowires and nanowire networks on Ge substrates.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510041
This study presents a full-scale engineering practice of retrofitting an idle upflow anaerobic sludge blanket (UASB) reactor into an aerobic granular sludge (AGS) system for treating low-strength municipal wastewater. The design capacity was 20,000 m3/d (maximum 24,000 m3/d), achieving separate treatment of industrial and domestic wastewater to reduce operational costs. Systematic analysis covered hydraulic capacity enhancement, effluent quality, pollutant removal efficiencies, sludge granulation progress, and operational costs. Results showed rapid start-up: the system reached 75% of design capacity by day 10 and 90% by day 26. During a 4-month operation, average removal efficiencies for COD, NH4+-N, TN, and SS were 83.2%, 97.0%, 75.9%, and 94.4%, respectively, even under low influent BOD5/TN ratios (typically below 4). Granulation progressed quickly: by day 44, average particle size was 2.6 times that of the inoculum and over 4 times that of flocs, with granules (>200 μm) accounting for 17.3%; by day 110, these values increased to 3.2 times and 5 times, with granule proportion reaching 33.4%. Compared to the previous year (June–August), the AGS process reduced electricity consumption, chemical consumption, and sludge production by 77.3%, 25.4%, and 30.4%, respectively, while saving 65.6% of footprint. This ten-thousand-ton case provides a practical basis for AGS technology application in China.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60643-3
The adsorption behavior and electron transfer mechanism of CO on Ptn/γ-Al2O3 catalysts (n = 4, 13) were systematically investigated using density functional theory (DFT) calculations, complemented by infrared (IR) spectroscopy, electron difference density (EDD), and charge decomposition analysis (CDA). The study reveals that Pt cluster size critically governs the adsorption configuration, electron transfer, and C–O vibrational frequency. For small Pt4 sub-nanometric clusters, highly unsaturated Pt atoms exhibit strong d-electron back-donation, leading to substantial filling of CO π* antibonding orbitals, significant weakening of the C–O bond, and a redshift in IR frequency. Conversely, large Pt13 clusters, characterized by dense structures and electron delocalization, exhibit weakened back-donation, enhanced C–O bonding, and a blueshift. The electron transfer intensity follows the order: linear < bridge < multi-terminal adsorption. Bridge adsorption is most sensitive to cluster size, displaying an IR blueshift of 81 cm−1 when Pt atoms increase from 4 to 13. Multi-terminal adsorption shows stable frequencies due to a 'saturation effect'. This study establishes a comprehensive correlation among Pt size, electronic structure, adsorption properties, and infrared response, providing atomic-scale theoretical guidance for designing efficient Pt-based catalysts with optimized CO adsorption strength and resistance to poisoning.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60638-X
The extensive emission of greenhouse gases, primarily CO2 and CH4, has contributed to intensified global warming. Dry reforming of methane (DRM, CH4 + CO2 → 2CO + 2H2) offers a pathway for the synergistic utilization of these two major greenhouse gases, presenting important implications for both environmental protection and energy sustainability. However, the catalysts still face challenges such as carbon deposition and sintering of active metals, which adversely affect the catalytic performance and long-term stability. Oxygen vacancies, which are common lattice defects in metal oxides, have been demonstrated to improve the DRM performance by modulating the surface and interfacial properties of the catalysts. This review systematically summarizes research progresses in DRM over the past decade, outlines the major challenges and emphasizes the critical roles of oxygen vacancies in suppressing carbon deposition and inhibiting metal sintering. Furthermore, the mechanisms through which oxygen vacancies influence DRM reactions are discussed, combined with their formation pathways and regulation strategies. These insights provide essential theoretical foundations for the design and synthesis of highly efficient and stable DRM catalysts.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607007
Printing and dyeing sludge (PDS) fly ash is often classified as hazardous waste due to its high content and diversity of heavy metals (HMs). This study co-disposed PDS fly ash and heavy metal-contaminated soil to produce sintered ceramsites, investigating the effects of sintering conditions on physical properties and HM migration/transformation, and elucidating the immobilization mechanisms. The optimal sintering process was identified as preheating at 400 °C for 10 min, followed by sintering at 1150 °C for 10 min. The resulting ceramsites exhibited a 1-h water absorption of 2.7%, a bulk density of 830 kg/m³, HM volatilization rates below 15%, and a residual fraction (F4) proportion exceeding 86%. Characterization revealed that during sintering, HMs were encapsulated by the glassy phase and reacted with amorphous silica-alumina to form stable silico-aluminates, synergistically reducing HM mobility. However, sintering temperatures ≥1200 °C destabilized the ceramsite structure, causing secondary HM release. This research provides an efficient and simple route for the resource utilization of dyeing sludge fly ash and contaminated soil.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3981-7
Solution-processable quasi-2D perovskites are promising laser gain media due to their high exciton binding energy and improved stability relative to 3D counterparts. However, conventional synthesis yields mixed n-value phases, introducing interfacial defects and energetic disorder that impede charge injection into desired emission centers. Here, we report the first demonstration of stimulated emission from a phase-pure quasi-2D perovskite (n=8) achieved via a solvent-sieving method for selective phase removal. This dynamic purification yields near-unity phase purity (99.85%) with no detectable low-n phases, as confirmed by X-ray diffraction and ultraviolet-visible spectroscopy. The phase-pure film exhibits a narrower and more intense (001) diffraction peak (FWHM 0.16 nm, intensity 16,129) compared to pristine films (FWHM 0.22 nm, intensity 3,304), indicating enhanced crystallinity and increased grain size. Time-resolved photoluminescence reveals a prolonged carrier lifetime of 6.98 ns, suggesting reduced trap density. Atomic force microscopy shows a nearly pinhole-free surface with root mean square roughness of 1.18 nm. Consequently, the amplified spontaneous emission threshold is reduced to 13.82 μJ cm−2, a 12.5% improvement over conventional mixed-phase films (15.8 μJ cm−2). This work provides an efficient route to pure-phase quasi-2D perovskites for low-threshold lasers.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607024
This study systematically investigated the effects of single and composite conditioning with lysozyme, amylase, and protease on sludge dewatering performance and carbon source recovery in filtrate from residual sludge of a water treatment plant in Foshan City. Results indicated that lysozyme significantly improved sludge dewatering by reducing specific resistance of filtration (SRF), capillary suction time (CST), and water content of the filtered sludge cake (Wc). While amylase and protease decreased Wc, they elevated SRF and CST, deteriorating sludge filtration properties. Among combined enzyme treatments, lysozyme and protease exhibited synergistic effects. The asynchronous addition strategy (protease/amylase followed by lysozyme) demonstrated the best performance in reducing Wc, while simultaneous addition was more effective in improving SRF and CST. Mechanistic analysis revealed that all three enzymes reduced sludge particle size. Lysozyme primarily targeted cell lysis and wall disruption, releasing intracellular substances, reducing viscosity, and enhancing sludge hydrophobicity. Meanwhile, amylase and protease mainly disrupted extracellular polymeric substances (EPS), leading to release of proteins and polysaccharides into slime EPS, increasing viscosity and hydrophilicity. Furthermore, all three enzymes effectively promoted carbon source release, increased soluble chemical oxygen demand (SCOD) of filtrate, and transformed recalcitrant humic acid-like organic matters into readily bioavailable tryptophan-like and tyrosine-like substances. These findings provide a basis for optimizing enzyme-based sludge conditioning to achieve simultaneous dewatering enhancement and carbon source recovery.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4116-0
The design of solid electrolyte interphases (SEIs) for poly(vinylidene fluoride)-based solid-state batteries has largely focused on solvent-affinity of Li+ to generate robust but ionically sluggish LiF-rich layers, inherently compromising transport kinetics. Here, we establish a paradigm based on quantifiable physicochemical descriptors (ionic potential and donor number) to guide the design of amphitropic ion pairs (AIPs). These AIPs are engineered to simultaneously tailor both the solvent-affinity and anion-affinity of Li+: a solvent-philic cation with high ionic potential (Al3+) first sequesters reactive solvents, clearing the path for a high-donor-number, lithium-philic anion (NO3−) to remodel solvation. This rationally guided, sequential mechanism enables the in situ synthesis of a LiF/Li3N heterostructured SEI, where dendrite-suppressing LiF domains are seamlessly integrated with ultra-fast Li3N ion channels. This design heterogeneity effectively enhances stability and kinetics, yielding a robust and highly conductive interface. Consequently, Li|Li cells achieve >2000 h of stable cycling, and Li|LiNi0.8Co0.1Mn0.1O2 full cells surpass 600 cycles.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3970-1
Dielectric elastomer actuators (DEAs) are promising artificial muscle technologies due to their large actuation strains, high energy density, and fast response. However, their practical application is hindered by a trade-off between increasing the relative dielectric constant (εr) and decreasing the Young's modulus (Y), which limits electromechanical sensitivity (εr/Y) to below 110 MPa⁻¹. Here, we report a hetero-cross-linking strategy to fabricate a semiseparated biphasic bicontinuous dielectric elastomer (SBE) using two commercial silicone elastomers: Elastosil P7676 (mechanical phase, M-phase) and Sylgard 170 (dielectric phase, D-phase). The M-phase provides an ultralow Young's modulus (~10 kPa), while the D-phase offers a high dielectric constant (3.6). With only 10% D-phase content (SBE-1), the material achieves a record-high electromechanical sensitivity of 360 MPa⁻¹. Under an electric field of 35 V μm⁻¹ without prestretching, SBE-1 exhibits a 90% area strain, significantly outperforming pure phases and previously reported DEAs. The interpenetrating phase structure also enhances breakdown strength. SBE-based artificial muscles demonstrate large displacement at high frequencies, achieving a power density of 2250 W kg⁻¹ at resonance (>200 Hz), surpassing natural muscle and prior DEA artificial muscles. A human-like robotic arm with one rotational joint and four pure-shear SBE-based artificial muscles was developed, capable of extending and bending actions. This work provides a versatile strategy for high-performance DEAs, advancing soft robotics applications.