SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4245-4
The discrimination of volatile organic compounds (VOCs) at trace concentrations remains a critical challenge for environmental monitoring, industrial process control, and non-invasive disease diagnostics. Conventional electronic noses rely on sensor arrays comprising multiple chemically distinct receptors, which introduces fabrication complexity, calibration drift, and cross-sensitivity. Here, we demonstrate that a single-component Ti3C2Tx MXene (TM) sensor array, engineered through controlled surface chemistry and device architecture, generates independent and high-dimensional characteristics (IHC) sufficient for precise VOC pattern recognition. By exploiting the intrinsic heterogeneity of TM basal planes and edge sites, we achieve differential interaction motifs without expanding elemental composition. The array discriminates VOCs including acetone, ethanol, toluene, and hexane at concentrations down to 100 ppb with classification accuracy exceeding 95%. Principal component analysis reveals distinct clustering with cumulative variance of 92.3% captured by the first three principal components. The sensor exhibits a limit of detection of 50 ppb for acetone and response/recovery times of 12 s and 18 s, respectively. Long-term stability tests over 30 days show less than 5% signal degradation. This single-component strategy simplifies fabrication, reduces calibration overhead, and offers a scalable pathway for miniaturized, low-power VOC sensing platforms compatible with Internet of Things (IoT) deployment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3449-5
The escalating demand for high-performance lithium-ion batteries (LIBs) in portable electronics and electric vehicles has driven extensive research into advanced electrolytes. Ionic liquids (ILs) and their derived electrolytes, including poly(ionic liquids), ionogels, and IL-functionalized systems, offer significant potential for enhancing the safety and electrochemical performance of LIBs due to their unique properties such as non-volatility, wide electrochemical windows, and excellent thermal stability. These properties enable safer, high-energy, and long-lasting batteries. This review conducts a thorough analysis of the physicochemical properties of ILs and their versatile applications in electrolytes, particularly emphasizing their adaptability to fulfill the specific needs of different battery systems. In liquid electrolyte systems, ILs can function as solvents, interfacial modifiers, and critical components for constructing artificial solid electrolyte interphase (SEI). In (quasi-)solid-state electrolyte systems, ILs can be polymerized to form poly(ionic liquid)s or integrated with organic, inorganic, or composite materials to develop IL-based electrolytes, demonstrating multifunctional electrochemical performance. Finally, the review critically examines the challenges and opportunities in this field, offering insightful perspectives for future advancements.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011501
Per- and polyfluoroalkyl substances (PFAS) are a class of synthetic persistent organic pollutants that pose significant risks to human health. Owing to their high binding affinity for proteins, PFAS are ubiquitously detected in human populations worldwide. Following oral ingestion, PFAS bind to transport proteins such as human serum albumin and organic anion transporters, facilitating their distribution and accumulation in various tissues and organs, including the liver and kidneys, and enabling penetration across the blood-brain and placental barriers. This review systematically examines the migration and enrichment behaviors of PFAS in human tissues and organs mediated by multiple transport proteins, the molecular mechanisms underlying PFAS-protein interactions, and the key factors influencing these interactions. Additionally, we discuss the potential applications derived from PFAS-protein binding. By synthesizing current research findings, this review provides a theoretical foundation for future investigations into PFAS-protein interactions and outlines prospective research directions. The pervasive environmental contamination and documented health effects, including developmental retardation, endocrine disruption, obesity, and cancer, underscore the urgency of understanding PFAS toxicokinetics. Our analysis highlights the critical role of protein binding in the prolonged biological half-lives of PFAS and their tissue-specific accumulation, which are central to health risk assessment and the development of mitigation strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3812-5
Anaerobic bacterial infections, prevalent in oxygen-deprived tissues, are recalcitrant to conventional antibiotics due to slow bacterial metabolism and the generation of nutrient-rich niches that foster polymicrobial biofilms. Propionibacterium acnes (P. acnes), a skin commensal, exemplifies this challenge, causing acne vulgaris and implant-associated infections, with rising antibiotic resistance. This study introduces an antimicrobial peptide (AMP), WRK (sequence: WRKFRRFKFRW-NH2), which induces endogenous reactive oxygen species (ROS) production in anaerobic bacteria, exploiting their inherent low ROS tolerance. WRK exhibited potent antibacterial activity, with a minimum inhibitory concentration (MIC) of 4 μg mL−1 against planktonic P. acnes and a minimum biofilm eradication concentration (MBEC) of 64 μg mL−1. To enable dermal delivery, WRK was encapsulated in layered dissolving microneedles (MNs), which demonstrated adequate mechanical strength for skin penetration. In a mouse back acne model, AMP MNs significantly reduced P. acnes infection and inflammation, outperforming commercial clindamycin gel. Histological analysis confirmed reduced inflammatory cell infiltration and tissue hyperplasia in the AMP MN group. This strategy offers a promising approach for treating anaerobic infections without promoting drug resistance, addressing a critical unmet need in clinical dermatology and implant surgery.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60635-4
A Cu-based carbon catalyst (H-Cu/C) with octahedral morphology was synthesized by pyrolyzing the metal-organic framework (MOF) precursor HKUST-1 under inert N2 atmosphere. Characterization via XPS, XRD, SEM, and HRTEM revealed that Cu(0) nanoparticles were uniformly dispersed in a carbon matrix, with island-like Cu2O structures serving as active sites. The carbon matrix effectively stabilized the metal nanoparticles, suppressing migration and sintering during reaction. Combined with TEMPO and using molecular oxygen as a green oxidant, the H-Cu/C catalyst exhibited high efficiency in the selective oxidation of aromatic alcohols to corresponding aldehydes under alkali-free conditions. Using benzyl alcohol as a model substrate, an alcohol conversion of 99.2% and a benzaldehyde yield of 94.1% were achieved under mild conditions (100 °C, 0.5 MPa O2, 1 h). The catalytic system demonstrated excellent universality for various mono- and ortho/para-disubstituted aromatic alcohols, affording conversions over 99% and aldehyde yields above 95%. The catalyst could be regenerated via H2 reduction and reused without significant loss of activity. This work provides a new strategy for designing green and efficient non-noble metal catalytic systems for oxidation reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508006
Landfill leachate, characterized by high ammonia nitrogen, high organic load, complex toxic components, and low nitrogen removal efficiency, poses significant environmental challenges. To achieve efficient nitrogen removal, a continuous-flow two-stage anoxic/oxic (A/O) moving-bed biofilm reactor (MBBR) system coupled with anaerobic ammonium oxidation (Anammox) was constructed and operated for long-term treatment of actual landfill leachate. After biofilm attachment and multi-gradient acclimation, influent concentrations were gradually increased from low levels (NH4+-N ~200 mg·L−1, COD ~2500–3000 mg·L−1) to high levels (NH4+-N ~1800 mg·L−1, COD ~8500 mg·L−1). During stable operation, average removal efficiencies of NH4+-N and COD reached 97.7% and 66.8%, respectively, with total nitrogen (TN) removal efficiency improving to 93.9%. Along the reactor, the first A/O stage achieved major organic degradation and ammonia oxidation, while the second stage facilitated nitrite accumulation and promoted Anammox for synergistic nitrogen removal. High-throughput sequencing revealed Proteobacteria as the dominant phylum (>50%), with denitrifying genera such as Azoarcus and Thauera significantly enriched. Planctomycetota abundance increased from 0.6% to 3.7%, and Candidatus Kuenenia was detected, confirming successful Anammox colonization and participation in nitrogen removal. This study validates the efficient combined nitrogen removal mechanism of the A/O–MBBR system with Anammox, providing theoretical basis and technical support for engineering treatment of high-ammonia wastewater.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60651-2
Carbohydrates, derived from abundant biomass resources, hold great promise for conversion into fine platform chemicals and fuels, which is crucial for sustainable development. The processes for carbohydrate conversion are predominantly driven by catalysis, with active components such as Brønsted acids and Lewis acids. This review provides a comprehensive overview of the catalytic conversion of various carbohydrates (monosaccharides, disaccharides, and polysaccharides) into high-value-added compounds. It elaborates on the specific pathways and mechanisms involved in reactions like hydrolysis, isomerization, and dehydration for target molecules such as 5-hydroxymethylfurfural, lactic acid, and furfural. Furthermore, the subsequent derivatization of these platform compounds and their application prospects in energy-related fields, including bio-fuels and batteries, are discussed. Finally, the current challenges in research are summarized, and future directions for the development of low-cost and high-performance catalytic systems are outlined.