SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4360-7
Polarization-sensitive photodetection is critical for advanced optical communication and imaging systems, yet conventional photodetectors suffer from low on-off ratios and limited polarization discrimination. Here, we report gate-tunable PdSe2/WSe2 van der Waals heterostructures that achieve ultrahigh light on-off ratio and polarization-sensitive photodetection. The heterostructure forms a type-II band alignment, enabling efficient charge separation and self-powered operation. By applying a gate voltage, the photoresponse can be modulated, achieving an on-off ratio exceeding 10^6 under illumination. The device exhibits a high responsivity of 1.2 A/W and a specific detectivity of 10^12 Jones at room temperature. Polarization-sensitive measurements reveal a linear dichroism ratio of 2.1 at 532 nm, attributed to the anisotropic crystal structure of PdSe2. The photodetector operates over a broad spectral range from visible to near-infrared (400-1000 nm) with fast response times (rise/fall < 100 μs). The gate-tunable capability allows dynamic control of the photocurrent, enabling adaptive sensing applications. These results demonstrate that PdSe2/WSe2 heterostructures are promising candidates for high-performance, polarization-sensitive photodetectors, offering a pathway for next-generation optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4182-6
Substrate interactions dictate the epitaxial growth of low-dimensional nanomaterials, yet controlling these interfaces at the atomic scale precision remains a critical challenge. Blue phosphorene (blueP) with freestanding lattice constant, experimentally realized exclusively on Ag(111), provides a unique platform to explore this interplay. Here, we elucidate the structural evolution of blueP on Ag(111), revealing that neighboring islands are not isolated but linked by single-phosphorus-atom bridges. To manipulate the interfacial coupling, we introduce a tellurium interlayer, driving the formation of an interfacial AgTe buffer that effectively decouples the islands. By tuning the substrate temperature, we achieve the synthesis of magic-number blueP clusters with uniform size and geometry. The resulting isolated blueP nanostructures facilitate the emergence of higher-order topological corner states in triangular geometries. Our findings demonstrate that tailoring interfacial interactions offers a robust route for reshaping phosphorene nanostructures, establishing essential building blocks for next-generation topological quantum materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4397-4
The development of implantable bioelectronics faces critical trade-offs between mechanical compliance, electrical stability, and tissue adhesion. Here, we introduce ElHyX, a fully printable integrated system that combines ultrahigh stretchability, durable wet-tissue adhesion, strain-insensitive conductivity, and multimodal sensing-therapy feedback. The molecular covalent bonding design fundamentally eliminates the mechanical and electrical trade-offs of traditional soft conductive materials. Ex-vivo organ tests and long-term rodent implantation experiments verify stable working performance, favorable biocompatibility, and unique autonomous intervention capability. Specifically, the elastomer-hydrogel biphasic architecture achieves strain-insensitive conductivity with relative resistance changes below 5% over 1,000 cycles at 200% strain. The hydrogel component exhibits enhanced adhesion on porcine skin due to ionic crosslinks, maintaining performance after swelling. The integrated device enables closed-loop blood glucose management in diabetic rats, sensing glucose and heart rate to trigger vagus nerve stimulation for insulin modulation. Although unresolved problems exist in long-term in-vivo stability, wireless integration, and biodegradability, ElHyX provides a universal modular manufacturing framework for next-generation implantable bioelectronics. Further targeted optimization of material formulation, packaging technology, and closed-loop algorithms will accelerate industrialization and clinical translation of minimally invasive intelligent diagnostic and therapeutic implants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3627-x
Polar exploration demands robotic systems capable of operating at extreme low temperatures, yet existing electronic skins (e-skins) fail due to polymer brittleness and impaired self-healing. Here, we report a supramolecular elastomer strategy that enables highly stretchable, self-healing, and sensitive e-skins functional at −78 °C. The elastomers are based on a poly(dimethylsiloxane) (PDMS) backbone (Tg = −127 °C, Tb = −150 °C) functionalized with kinetically reversible quadruple hydrogen-bonding motifs (2-ureido-4[1H]-pyrimidone, UPy) in side chains (S-UD) or main chains (M-UD). At −78 °C, S-UD elastomers exhibit superior stretchability, with optimized S-U1.2D0.8 achieving elongation at break of ~3257%, 3.4 times that of PDMS controls and exceeding M-U1.2D0.8 (~2474%). Self-healing efficiency after 24 h at −78 °C reaches ~75.9% for S-UD versus ~34.3% for M-UD, with visual scratch disappearance only in S-UD. Density functional theory (DFT) analysis reveals that S-UD possesses more thermodynamically favorable chain convergence, enhancing cryogenic self-healing. The optimized S-UD elastomer serves as an excellent substrate for constructing ultralow-temperature-tolerant e-skins, addressing a critical bottleneck in polar robotics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3665-2
Immuno-phototherapy faces a critical bottleneck: achieving high singlet oxygen (1O2) quantum yield and efficient photothermal conversion simultaneously under a single near-infrared (NIR) laser. Here, we report an acceptor-donor-acceptor (A-D-A) structured molecule, 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']-dithiophene (m-ITIC), formulated into nanoparticles (NPs) via self-assembly with DSPE-PEG-NH2. The NPs exhibit strong NIR absorption and fluorescence at 688 and 768 nm, respectively. Under single-laser irradiation, they generate heat, superoxide anion (O2•−), and 1O2, with a 1O2 quantum yield of 56.8% and photothermal conversion efficiency (PCE) of 27.4%. This enables NIR fluorescence imaging-guided synergistic photodynamic therapy (PDT) and photothermal therapy (PTT). Notably, the nanoplatform induces PANoptosis—a coordinated cell death program integrating pyroptosis, apoptosis, and necroptosis—in tumor cells, amplifying immunogenic cell death (ICD). This triggers robust dendritic cell activation, macrophage polarization toward M1 phenotype, elevated CD8+ T cell infiltration, and suppression of immunosuppressive Treg cells, leading to significant tumor growth inhibition and prevention of lung metastasis in vivo. Therapeutic efficacy was validated in patient-derived tumor organoids, underscoring translational potential. This study presents a novel single-laser-activated nanoplatform that simultaneously mediates efficient photothermal and photodynamic effects and induces PANoptosis-driven ICD for synergistic cancer immunotherapy.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506005
The escalating generation of medical waste, driven by healthcare expansion and frequent medical activities, poses significant environmental and public health risks. Under the framework of ecological civilization, China is developing a comprehensive policy system for medical waste treatment and disposal, yet the current framework remains nascent and exhibits inconsistencies between national and local policies. This study systematically analyzes the status of national and local policies from 2003 to 2024, collecting 413 policy documents (166 from national ministries and 247 from provincial governments). The analysis examines temporal evolution, regional distribution, and policy focus, alongside the influence of medical waste output, treatment technologies, facility infrastructure, and major epidemic responses. Findings reveal distinct policy phases: initial self-disposal, exploratory management, foundational system building, and rapid development. Regional disparities are pronounced, with eastern coastal areas showing more advanced policies due to greater technical and financial resources. The surge in medical waste, particularly during the COVID-19 pandemic, underscores the need for enhanced regulatory guidance. Non-incineration technologies are gaining traction for their environmental and cost benefits, and facility coverage has improved but remains uneven. The study proposes five policy principles to foster technological innovation and industrial upgrading, ensuring safe medical waste management and environmental protection.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010203
The production and disposal of lithium batteries release not only hazardous metals and particulates but also substantial amounts of harmful organic pollutants. This study focuses on N-methyl-2-pyrrolidone (NMP) to investigate the environmental release and human exposure of organic pollutants throughout the lithium battery lifecycle. Using liquid chromatography-high-resolution mass spectrometry (LC-HRMS), NMP was quantified in environmental samples from battery production and dismantling facilities, as well as in pyrolysis products from simulated thermal recovery of mainstream lithium batteries. Key release stages were identified: slurry mixing and coating/drying during production; shredding, electrolyte volatilization, and high-temperature pyrolysis during disposal. In unprotected occupational settings, estimated NMP exposure via dust ingestion exceeded reference doses, underscoring the need for health impact assessments and evaluation of protective measures. This research provides critical insights into the environmental release and population exposure of organic pollutants across the lithium battery lifecycle, informing health policy for vulnerable populations.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604015
Shale gas extraction generates hazardous oily sludge, necessitating effective in-situ treatment. Microemulsion technology offers low energy consumption, cost efficiency, and high oil removal without heating. This study investigates single-surfactant microemulsions using sodium dodecyl sulfate (SDS) and alpha-olefin sulfonate (AOS), and composite microemulsions with sodium silicate (Na2SiO3). Phase behavior and effects of surfactant, alcohol, and salt concentrations on oil removal were examined. Optimal single formulations achieved removal rates of 86.33% for SDS (SDS:alcohol:NaCl = 2.72%:13.21%:2.17% mass ratio) and 87.45% for AOS (SDS:alcohol:NaCl = 2.72%:15.41%:2.17%). SDS microemulsions showed superior phase stability despite slightly lower removal efficiency. Composite SDS-Na2SiO3 microemulsion achieved 92.47% oil removal, outperforming single systems, and could be recycled five times while meeting national secondary reuse standards. AOS-Na2SiO3 exhibited better salt resistance, whereas SDS-Na2SiO3 showed better alcohol resistance. This work provides a novel approach for in-situ oily sludge treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3881-y
One-dimensional (1D) and quasi-1D platinum diselenide (PtSe2) exhibit enhanced quantum confinement and surface effects, leading to distinctive electronic and optical properties. However, efficient synthesis of high-quality quasi-1D PtSe2 with controlled dimensionality and orientation remains challenging. Here, we report the first successful synthesis of quasi-1D PtSe2 via a carrier-gas-assisted chemical vapor deposition (CVD) approach. By optimizing hydrogen concentration, we achieved highly oriented and crystalline quasi-1D PtSe2, which exhibits exceptional thermodynamic stability along the (110) crystal plane. Electrical characterization reveals that 2D few-layer PtSe2 exhibits p-type semiconductor properties, while quasi-1D multilayer PtSe2 displays semimetallic behavior. Due to quantum confinement effects, both materials exhibit similar carrier mobilities. In photodetection at 1550 nm, 2D PtSe2 exhibits conventional positive photoresponse with a maximum responsivity of 97.0 A/W. In contrast, quasi-1D PtSe2 demonstrates unique negative photoresponse, achieving a maximum responsivity of 194.2 A/W, attributed to its semimetallic nature and significant surface traps. Temperature-dependent photoresponse measurements at various power levels further confirm that the negative response originates from a defect-assisted photogating effect, the strength of which exhibits significant temperature dependence under high-power illumination. This work not only fills a gap in the synthesis of 1D PtSe2 but also provides a novel material platform for developing advanced infrared optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3470-6
Inkjet printing of two-dimensional transition metal chalcogenides (TMDs) is promising for low-cost, large-scale flexible electronics, yet challenges persist due to poor crystallinity and toxic solvents. Here, we report a green ink formulation using zwitterionic cocamidopropyl betaine (CAB) as a dispersant and surfactant for liquid-phase exfoliation of single-crystalline TMDs in water and isopropanol (IPA). The dispersions contain no additives or binders, enabling direct production of stable (over one month) and concentrated (2 mg/mL) inks for MoS2, MoTe2, WS2, WSe2, and WTe2. Fully-printed MoSe2/CAB humidity sensors exhibit superior sensitivity (ΔI/I0 = 468.1) and rapid response/recovery times (27 s/0.42 s) under bending. Inkjet-printed WTe2/CAB pads on 6-μm-thick substrates demonstrate exceptional mechanical stability, with resistance variations of 1.4% under single bending and 2% after 1,000 cycles, and acquire high-quality electrocardiogram (ECG) and electromyography (EMG) signals. This strategy enables scalable fabrication of TMD-based flexible electronics, advancing industrial integration.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508013
The Sanshenggong section of the Yellow River is a critical hydrological monitoring and control point, whose water quality directly affects the ecological safety and sustainable water resource utilization of the middle and lower reaches. This study analyzed water quality monitoring data from 2011 to 2024 using the Mann-Kendall test to identify abrupt change years, combined with single-factor evaluation and a fuzzy comprehensive evaluation method improved by CRITIC-entropy weight combination to systematically assess water quality evolution. The Mann-Kendall test identified 2013 and 2019 as abrupt change points, with non-significant improvement from 2013 to 2015 and significant improvement after 2016. Single-factor evaluation indicated that total phosphorus (TP) was the primary exceeding factor in 2011–2012, and its declining concentration drove the water quality upgrade from Class III to Class II in 2013. The CRITIC-entropy weight combination assigned the highest weight (28.96%) to permanganate index, whose decline was the core driver of water quality improvement. The improved fuzzy evaluation showed that the membership degree of Class III water dropped to zero in 2013, indicating stable improvement, but periodic rebounds in Class II membership suggested potential degradation risks. This study provides scientific evidence for ecological protection and high-quality development of the Yellow River Basin.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3889-6
Photocatalytic hydrogen production is fundamentally limited by inefficient charge separation and asynchronous supply of electrons and protons to active sites. Here, we designed a ZnIn2S4/ZnCo2S4 (ZIS/ZCS) heterojunction with an atomically coherent interface achieved via an ultralow lattice mismatch of 0.05%. This unique structure promotes rapid electron transfer through a built-in electric field and facilitates continuous proton migration via a hydrogen spillover effect, thereby synchronizing electron and proton delivery at the catalytic interface. This dual regulation of electrons and protons synergistically promotes proton-coupled electron transfer, resulting in a high hydrogen evolution rate of 70.3 mmol g−1 h−1 and selective oxidation of benzyl alcohol to aldehyde (39.3 mmol g−1 h−1) with 93.6% selectivity. This work demonstrates the critical importance of lattice match and dual charge-proton management in designing efficient photocatalysts for complex redox reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3965-5
Liquid crystal elastomers (LCEs) have emerged as a promising material platform for soft robotics, effectively integrating programmable molecular orientation with the inherent flexibility of elastomers. This unique combination enables significant, reversible deformations responding to external stimuli, including heat, light, electric, and magnetic fields. Due to these characteristics, LCEs serve as an ideal material system for bridging biological principles with engineered soft robotic applications, enabling the development of adaptive and multifunctional systems with enhanced biomimetic capabilities. However, the mechanisms of bioinspired motion and the effective integration of biomimetic functions in LCE-based robots remain insufficiently explored. This review systematically examines recent advances in LCE-based biomimetic soft robots, focusing on multimodal actuation strategies, including contraction, crawling, rolling, jumping, swimming, and plant-inspired motions. It highlights integrated functional enhancements achieved via innovative material compositions, structural designs, and advanced manufacturing techniques. These developments have enabled novel robotic functionalities, including programmable actuation, self-healing and recycling, color morphing and camouflage, and tunable bioinspired surface characteristics.