SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4286-4
Multifunctional nanoplatforms capable of efficiently regulating both emerging and classical cell death mechanisms, thereby overcoming the adaptive resistance of malignant cells to certain cell death modalities, remain a significant challenge. Herein, we propose a new concept for the self-assembly of zinc-cystine coordination networks on curcumin (Cur) drug nanocrystals (DNCs) to construct Cur@PDA@GOx/Zn-Cys (CPGZC) nanoplatforms, enabling enhanced antitumor therapy through multicomponent synergistic modulation of both newly identified disulfidptosis and classical apoptosis. At tumor site, GOx-mediated glucose depletion reduces nicotinamide adenine dinucleotide phosphate (NADPH) levels, which can impair the intracellular conversion of cystine to cysteine. Combined with the exogenous cystine delivered by CPGZC NPs, rapid intracellular disulfide accumulation strongly activates disulfidptosis. Simultaneously, the reduction in NADPH levels inhibits GSH biosynthesis, augmenting the intracellular ROS levels elicited by Cur DNCs within the CPGZC nanoplatforms. Moreover, the elevated oxidative stress, in synergy with the excessive Zn2+ introduced, aggravates mitochondrial damage, thereby further amplifying apoptosis. Consequently, the synergistic modulation of disulfidptosis and apoptosis induces a potent antitumor response, as validated by comprehensive in vitro and in vivo investigations. This study opens new avenues for the development of multifunctional nanoplatforms for enhanced cancer therapy through the effective integration of both emerging and classical cell death mechanisms, which may serve as a promising strategy to advance our comprehension of synergistic utilization of various cell death mechanisms and combat with complex cancers.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4476-1
Self-sustained oscillation in soft actuators enables autonomous, untethered robotic locomotion, yet existing light-driven systems suffer from low oscillation frequencies, rapid photothermal degradation, and reliance on external controllers. This work presents a bat-inspired soft robot that converts continuous near-infrared (NIR) irradiation into sustained rotational motion via a coiled MXene-based liquid crystal elastomer (LCE) actuator. The actuator integrates Ti3C2Tx MXene nanosheets as photothermal converters within an LCE matrix, achieving a photothermal conversion efficiency of 78.3% and a steady-state temperature of 142 °C under 1.5 W cm−2 NIR (808 nm). The coil geometry induces a self-shadowing effect that generates periodic light exposure, producing autonomous oscillation at 2.7 Hz with an amplitude of 45°. The robot demonstrates a rotational speed of 120 rpm and a specific power density of 3.2 W kg−1, outperforming previously reported light-driven oscillators by a factor of 2.5. Under continuous operation for 10,000 cycles, the actuator retains 92% of its initial oscillation amplitude, with a degradation rate of 0.008% per cycle. The bat-inspired wing morphology enables directional rotation and obstacle avoidance in confined spaces. This platform eliminates the need for external modulation, offering a scalable route to autonomous soft robotics for inspection, environmental monitoring, and micro-manipulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4262-7
The escalating demands of artificial intelligence, machine learning, and neural computing necessitate multifunctional optoelectronic devices capable of integrating sensing, memory, and processing. Two-dimensional van der Waals heterostructures (vdWHs) offer unique advantages, yet their practical deployment is hindered by complex architectures and inefficient mode-switching. Here, we demonstrate a MoTe2/SnS2 anti-ambipolar heterojunction device enabling single-gate reconfiguration among frequency doubling, broadband photodetection, and neuromorphic computing. The device exhibits a peak-to-valley ratio (PVR) of 465, ensuring efficient frequency doubling. As a photodetector, it operates across an exceptionally broad spectral range of 520–2200 nm, with outstanding responsivity and detectivity. Furthermore, the device emulates complete synaptic behaviors, including short-term plasticity (STP), long-term plasticity (LTP), and paired-pulse facilitation (PPF). Integrated into a reservoir computing (RC) system trained on a vehicle motion dataset, it achieves a directional recognition accuracy of 98.7%. This work establishes a paradigm for multifunctional integration and low-power neuromorphic computing, advancing next-generation intelligent optoelectronic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4213-x
Lipid peroxyl radicals (ROO·) are terminal propagating species in lipid peroxidation, driving oxidative damage in neurological disorders. Their prolonged lifetime and rapid diffusion within lipid membranes render them difficult to neutralize. Here, we report a bioelectric-responsive TEMPO-doped polydopamine (PDA@TEMPO) nanozyme that sustains catalytic interception of ROO· radicals under persistent oxidative stress. By coupling a PDA redox reservoir with TEMPO catalytic centers, the nanozyme establishes a self-regenerating radical-neutralization cycle via proton-coupled electron transfer (PCET). The π-conjugated framework facilitates charge migration and enables an electric-field-enhanced antioxidant response. In a seizure model, the nanozyme dynamically responds to bioelectric fluctuations, accelerating radical interception and alleviating oxidative stress in neural microenvironments. These findings establish bioelectric-coupled nanozymes as a general strategy for catalytic and sustained regulation of oxidative stress in neural microenvironments, providing a potential therapeutic approach for neurological disorders.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3841-6
Ni-rich layered oxide cathodes are pivotal candidates for next-generation lithium-ion batteries (LIBs) due to their high capacity and energy density. However, their susceptibility to structural deterioration and interfacial degradation during cycling causes substantial capacity fade, hindering commercialization. This work proposes a synergistic strategy of lattice doping and in situ surface coating to enhance structural integrity and interfacial stability of LiNi0.9Co0.05Mn0.05O2. La and Y dopants act as pillars to reinforce the layered structure, mitigating volume changes and expanding c-axis spacing to facilitate Li+ diffusion. Concurrently, La4NiLiO8 and LiYO2 coatings protect the cathode from H2O/CO2 corrosion and electrolyte attack, while their high lithium-ion conductivity promotes Li+ transport. The modified cathode delivers exceptional electrochemical metrics: high specific capacity of 207.3 mA h g−1, remarkable cycling stability with 97.6% retention after 100 cycles, superior rate capability of 152.1 mA h g−1 at 10.0 C, and enhanced thermal stability. This work establishes a paradigm for multi-dimensional stabilization of Ni-rich cathodes via synergistic bulk and interface engineering, providing insights for designing high-performance energy storage systems.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61072-4
Sodium-ion capacitors (SICs) typically feature a hybrid design, incorporating a battery-type anode that operates by faradaic redox reactions and an activated carbon cathode that functions through electrical double-layer (EDL) adsorption/desorption. However, the kinetics of faradaic processes are inherently slower than those of EDL processes, leading to a fundamental problem known as kinetic imbalance between the electrodes, which hinders the development of high-performance SICs. To address this, we synthesized composites of bismuth nanoparticles in N-doped carbon (Bi@NC) by a high-temperature sintering method. The resulting Bi@NC anode has a specific capacity of 300 mAh g−1 at 0.5 A g−1, an exceptional rate capability (maintaining performance at currents exceeding 75 A g−1), and outstanding cycling stability over 12,000 cycles. Three-electrode Swagelok cell tests revealed that this high-rate Bi@NC composite effectively decreases the kinetic gap with the activated carbon cathode, as shown by an analysis of their respective potential swing windows (vs. Na/Na+). This enables the fabricated SIC to achieve a maximum energy density of 115 Wh kg−1, a peak power density of 45,535 W kg−1, and a long cycle life exceeding 8,000 cycles.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025122101
Phenolic compounds, widely used in petrochemical, textile, and pharmaceutical industries, pose severe risks to ecosystems and human health due to their toxicity and persistence. Traditional Fe2+-mediated Fenton oxidation, while effective, suffers from external H2O2 and Fe2+ addition, low H2O2 utilization, narrow pH adaptability, and iron sludge generation. This study develops a g-C3N4-based heterogeneous photo-Fenton system that operates without external H2O2 or Fe2+ salts, exhibiting a wide pH range and minimal iron sludge. The synthesized Fe3O4@UiO/IKCN catalyst, under visible light, selectively reduces dissolved oxygen to H2O2 via a two-electron pathway and activates it to hydroxyl radicals (·OH), achieving efficient degradation of phenolic compounds. The integration of photocatalytic H2O2 formation and Fenton activation enables sustained production of oxidative species, demonstrating superior performance at circumneutral pH. This work provides new insights into the rational design of heterogeneous Z-scheme photo-Fenton catalysts and offers experimental and theoretical support for photocatalytic H2O2 synthesis and phenolic wastewater treatment.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225204
Cobalt-doped silica aerogel (Co@Si-A) catalysts were synthesized via a one-step sol-gel method and applied for peroxymonosulfate (PMS) activation to degrade tetracycline (TC). The catalyst with 25 wt% cobalt doping (25Co@Si-A) exhibited superior catalytic performance, achieving 98.97% TC degradation within 30 min under specified conditions (TC 10 mg/L, 100 mL). Brunauer-Emmett-Teller (BET) analysis revealed a high specific surface area and well-developed porous architecture with nano-confined spaces. The 25Co@Si-A/PMS system demonstrated outstanding adaptability across a broad pH range (5–9), maintaining >95% degradation efficiency, and showed strong resistance to sulfate and nitrate ions. In real water matrices, degradation efficiency remained around 80%. After five consecutive cycles, the system retained 82.33% degradation efficiency, with cobalt ion leaching of only 23.7 μg/L in the first cycle, indicating excellent stability. Mechanistic studies using electron paramagnetic resonance (EPR), radical quenching, and probe compound tests confirmed a synergistic radical and non-radical pathway. The primary reactive species were sulfate radicals (SO4•−), hydroxyl radicals (•OH), and singlet oxygen (1O2), with contributions of 58.53%, 9.79%, and 31.68%, respectively. Electrochemical tests indicated that 25Co@Si-A exhibited superior charge transfer compared to Co3O4, attributed to the nano-confined effect of the silica aerogel, which enhanced Co(II)/Co(III) redox cycling and PMS activation. This research provides a promising strategy for utilizing silica aerogel-based catalysts in advanced oxidation processes for water treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4094-8
Deep-blue multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters with high efficiency, high color purity, and high brightness are critically important for next-generation OLED displays, yet remain challenging due to severe aggregation and host-guest interactions in the solid state. Herein, we report a core-encapsulating molecular design strategy in which bulky and non-conjugated peripheral groups are introduced to sterically encapsulate a blue-emitting MR core, thereby suppressing intermolecular π-π interactions without perturbing its intrinsic electronic structure. Two new emitters, DNa-BN and QNa-BN, featuring half-encapsulated and fully encapsulated MR-core architectures, respectively, were developed. Owing to its fully encapsulated structure, QNa-BN exhibits pronounced aggregation resistance at high doping concentrations, maintaining photoluminescence quantum yields exceeding 96%, radiative decay rate constants on the order of 10^8 s−1, and fast reverse intersystem crossing rates (~10^5 s−1). Consequently, sensitizer-free OLEDs based on QNa-BN deliver narrowband deep-blue emission at 458 nm with a full width at half maximum of 22 nm, CIE coordinates of (0.142, 0.085), a maximum external quantum efficiency (EQE_max) of 34.4%, and a maximum luminance exceeding 20,000 cd m−2. Furthermore, by adopting a hyperfluorescence architecture, the EQE_max is further boosted to 38.7% with significantly suppressed efficiency roll-off. This work demonstrates that steric encapsulation of the MR core provides an effective and general approach to achieving aggregation-resistant, high-efficiency, and high-brightness deep-blue MR-TADF emitters for OLED applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4054-x
The sluggish kinetics and high onset potentials of the oxygen evolution reaction (OER) at the anode of alkaline water/seawater electrolyzers limit overall energy efficiency. Noble-metal oxides like RuO2 are active but suffer from high cost, agglomeration, and dissolution under oxidizing potentials, especially in chloride-rich electrolytes where competing chloride oxidation reaction (ClOR) occurs. Here, we report a mild two-step dry-wet milling strategy to achieve throughout lattice doping of F− into MnO2 (F-MnO2) and subsequent anchoring of atomically dispersed Ru via Ru–O/F hybrid bonds. The strengthened Mn 3d–O/F 2p hybridization and negative charge shielding of surface F− enhance OER activity/selectivity relative to ClOR and impart superior Cl− tolerance and corrosion resistance. The resulting F-Ru-MnO2-TH electrocatalyst exhibits overpotentials of 280 mV and 200 mV at 10 mA cm−2 in alkaline water and simulated seawater, respectively. It retains ~100% of initial activity after 200 h continuous operation in alkaline media and >95% after 300 h in simulated seawater, significantly outperforming Ru-MnO2 and commercial RuO2. This work provides a scalable route to durable, high-performance OER catalysts for seawater electrolysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3545-7
Magnetically driven hydrogel robots show promise in biomedical and underwater applications due to remote controllability, flexibility, biocompatibility, and chemical stability. However, limited functional integration restricts their adaptability. Here, a universal modular assembly strategy is introduced using a self-healing κ-carrageenan/polyacrylamide hydrogel embedded with magnetic particles, enabling free assembly of magnetic actuation modules. These modules construct soft robots with complex geometries and magnetization distributions, allowing diverse deformations under magnetic fields. The strategy further integrates photocatalysis by embedding Ru-Bi2CrO6 photocatalysts into functional modules, yielding an oxygen-generating robot. This robot exhibits flexible underwater movement via magnetically controlled oscillatory actuation, minimizing water agitation while supplying stable oxygen to specific aquatic environments. The photocatalytic oxygen evolution rate reaches 389.1 μmol g−1 h−1. The hydrogel skeleton suppresses particle aggregation and sedimentation, and facilitates magnetic recovery. This scalable and adaptable approach advances multifunctional soft robot design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3650-6
Aggregation-induced emission active chiral polymer dots (AIE@CPdots) are emerging as high-performance emission layers (EMLs) for circularly polarized organic light-emitting diodes (CP-OLEDs) due to their persistent emission stability, high photoluminescence quantum yields, excellent solution processability, facile functionalization, tunable bandgap-governed emission, and superior device processability. However, reports on such systems remain scarce. In this study, a pair of chiral conjugated polymer enantiomers (R/S-PFC) was synthesized via Suzuki polymerization using three monomers: a chiral binaphthalene moiety, a fluorenyl linker, and an AIE-active cyanostyrene dye. After annealing at 110 °C, the resulting R/S-PFC self-assembled into chiral nanoparticles (AIE@CPdots) in a chloroform/n-hexane mixed solvent (9:1 v/v), exhibiting enhanced circularly polarized luminescence with a luminescence dissymmetry factor (|g_lum|) of 4.4 × 10⁻³ at 462 nm. Notably, AIE@CPdots served as the EML in CP-OLEDs, achieving high-performance circularly polarized electroluminescence with an electroluminescence dissymmetry factor (|g_EL|) of 3.0 × 10⁻³ at 464 nm, a maximum luminance (L_max) of 6022 cd m⁻², and a maximum current efficiency (CE_max) of 1.10 cd A⁻¹. This work provides a novel strategy for designing superior EML materials for CP-OLEDs via chiral self-assembled AIE@CPdots.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60638-X
The extensive emission of greenhouse gases, primarily CO2 and CH4, has contributed to intensified global warming. Dry reforming of methane (DRM, CH4 + CO2 → 2CO + 2H2) offers a pathway for the synergistic utilization of these two major greenhouse gases, presenting important implications for both environmental protection and energy sustainability. However, the catalysts still face challenges such as carbon deposition and sintering of active metals, which adversely affect the catalytic performance and long-term stability. Oxygen vacancies, which are common lattice defects in metal oxides, have been demonstrated to improve the DRM performance by modulating the surface and interfacial properties of the catalysts. This review systematically summarizes research progresses in DRM over the past decade, outlines the major challenges and emphasizes the critical roles of oxygen vacancies in suppressing carbon deposition and inhibiting metal sintering. Furthermore, the mechanisms through which oxygen vacancies influence DRM reactions are discussed, combined with their formation pathways and regulation strategies. These insights provide essential theoretical foundations for the design and synthesis of highly efficient and stable DRM catalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3949-4
Sodium metal is considered an ideal anode material for high-performance sodium-based batteries. However, volume changes and dendrite growth during cycling seriously restrict its practical application. To address these challenges, this study utilizes harmful green tide algae Enteromorpha prolifera as a raw material to fabricate a self-supporting, sodiophilic, 3D Enteromorpha prolifera-derived carbon (EC) matrix via defect engineering. The results demonstrate that the 3D EC matrix can reduce nucleation overpotential, enhance binding ability with sodium atoms, and induce sodium to deposit horizontally inside EC, effectively addressing the issue of dendrite formation. Furthermore, the Na-EC symmetric cell demonstrates exceptional cycling stability with an ultralow polarization of 12 mV over 1000 h at 5 mA cm−2, 5 mA h cm−2. Notably, this stability persists even under ultrahigh current density and areal capacity conditions (30 mA cm−2, 30 mA h cm−2), maintaining stable operation for 500 h. When configured in full-cell systems with Na3V2(PO4)3 cathode, the assembled cell delivers an initial discharge capacity of 108.1 mA h g−1 at a 1 C rate, and maintains a capacity retention rate of 94.4% after 500 cycles. This study proposes an innovative strategy to advance high-performance dendrite-free sodium metal batteries through the recycling of marine environmental waste into functional energy materials.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511054
A novel S-scheme heterojunction photocatalyst, Bi6O5(OH)3(NO3)5·3H2O/BiOBr0.8I0.2 (BON@BI), was synthesized via a one-step hydrothermal method using Bi6O5(OH)3(NO3)5·3H2O (BON), KBr, and KI as precursors. The mass ratio of BON to BiOBr0.8I0.2 (BI) was optimized, revealing that the 20% BON@BI composite (BON@BIOPT) exhibited the highest visible-light photocatalytic activity. Under 30 min of visible-light irradiation, BON@BIOPT achieved a 99.8% degradation efficiency of Rhodamine B (RhB), approximately twice that of pristine BI (52.2%). The composite displayed a rod-like morphology with uniform nanosheets, and its specific surface area increased from 32.54 m²·g⁻¹ (BI) to 44.7 m²·g⁻¹. The absorption edge red-shifted from 560 nm (BI) to 580 nm, narrowing the bandgap from 2.55 eV to 2.43 eV. The S-scheme heterojunction formed between BON and BI generates an internal electric field that effectively suppresses recombination of strongly reducing photogenerated electrons and strongly oxidizing holes, with superoxide radicals (O₂•⁻) and holes (h⁺) identified as the primary reactive species. BON@BIOPT exhibited excellent stability, retaining 88.6% degradation efficiency after seven consecutive cycles. It also demonstrated robust environmental adaptability, maintaining 85–98% degradation efficiency under various pH conditions and in the presence of interfering anions. The degradation pathway of RhB involves N-de-ethylation, cleavage of the conjugated chromophore, and deamination, ultimately mineralizing into low-molecular-weight organics, inorganic salts, CO₂, and H₂O. These results underscore the potential of BON@BIOPT for practical remediation of organic pollutants in water.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511094
Brewer's spent grain (BSG), a major byproduct of the brewing industry, is produced in large quantities globally, yet its high-value utilization remains limited. This study investigated the effects of fermentation temperature (35, 40, 45, 50, and 55 °C) on volatile fatty acid (VFA) production and fungal community structure during anaerobic fermentation of BSG. Results showed that mesophilic temperatures significantly enhanced VFA yields, with the highest production at 35 °C, reaching 344.22 mg/g COD converted, and a peak VFA concentration of 14,267 mg/L after 5 days. Acetic acid dominated the VFA profile (95.6%–98.9%) across all temperatures. Protein and carbohydrate degradation rates were highest under mesophilic conditions, while lipid degradation peaked at 55 °C. Fungal community analysis revealed that at peak acid production, cellulose-degrading fungi were predominant, with Oligophagozyma being the dominant genus at 35 °C (90.07%) and 40 °C (55.31%). Higher temperatures increased fungal diversity and evenness. Mantel tests indicated that carbohydrates and lipids promoted fungal growth, whereas total dissolved solids, nitrate, and phosphate inhibited it. These findings provide insights into the role of fungi in VFA production from BSG and support its resource utilization.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608006
Organic waste is a potential phosphorus reservoir, and understanding the dynamics of available phosphorus (AP) during its resource utilization is critical for efficient phosphorus recovery. Composting, a key route for organic waste valorization, involves complex transformations of phosphorus alongside organic matter degradation and humification. However, the long duration and high cost of composting experiments, coupled with multifactorial influences, hinder efficient elucidation of AP dynamics via conventional methods. This study compiled data from 33 publications, constructing a dataset of 647 samples. Data preprocessing included iterative imputation, one-hot encoding, and standardization. A stacking ensemble learning model was developed to predict AP generation during composting. The optimal ensemble comprised XGBoost and SVR as base learners and ElasticNet as the meta-learner, achieving R² values of 0.954 and 0.928 on training and test sets, respectively, with low overall error. SHAP analysis revealed that key factors influencing AP content, in descending order of importance, were feedstock type, bulking agent type, turning interval, pH, electrical conductivity (EC), and C/N ratio. Notably, livestock manure as feedstock and straw-based bulking agents contributed positively to AP predictions. Partial dependence plots indicated that lower pH and C/N ratios generally favored AP accumulation throughout composting. During the initial stage, higher moisture content and lower EC enhanced AP; in the thermophilic phase, higher temperatures corresponded to higher AP; and during cooling and maturation, maintaining moisture below 48% and C/N below 14, while extending composting beyond 43 days, promoted AP accumulation. This study demonstrates accurate AP prediction via stacking ensemble learning and identifies critical factors, offering support for optimizing phosphorus management in composting engineering.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4029-4
Chemical sensing technology is pivotal in modern industry and daily life, with sensor performance critically reliant on nanomaterials. While sensors based on traditional nanomaterials, such as inorganic semiconductors and organic conductive polymers, have achieved commercialization, they face persistent challenges. As an emerging subclass, conductive metal-organic frameworks (c-MOFs) not only inherit the core advantages of traditional MOFs—high specific surface area, porosity, and tunable composition/structure—but also offer adjustable electrical conductivity, rendering them ideal for sensing applications. This review systematically elucidates the construction and properties of c-MOFs across microscopic crystalline and macroscopic micro-nano structural scales. Special emphasis is placed on the structural design and regulation of c-MOFs for analytical sensing, and the intrinsic structure-performance relationship is clarified to achieve higher sensitivity, selectivity, response speed, and long-term stability, as well as other performance metrics. Finally, we comprehensively summarize the typical applications of c-MOFs-based sensors, covering environmental and safety monitoring, photoelectric detection, and health monitoring and diagnosis. At the same time, the key challenges existing in this field, such as the controllable preparation of high-quality single-crystal materials, the theoretical analysis of intrinsic electrically conductive mechanisms, and the balance between macroscopic material stability and the processing performance of devices, were evaluated. The future research directions should focus on developing new ligands and metal combinations to optimize the band structure, deepening the exploration of the mechanisms of emerging physical effects such as piezoelectricity, and promoting the integration and application of materials in practical scenarios such as flexible electronics and wearable devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4188-x
Sodium metal anodes, with high theoretical capacity (1166 mAh g−1) and low redox potential (−2.71 V vs. H+/H2), are promising for low-cost, high-energy sodium metal batteries (SMBs). However, uncontrolled dendrite growth and drastic volume changes cause short circuits and safety hazards. This work presents a dual-gradient engineering strategy to address these issues. A 3D self-supporting current collector (SSM-ZnS@Zn) was fabricated by laminating a stainless steel mesh (SSM) with a Zn foil decorated with pre-grown ZnS nanoparticles via a one-step rolling process. The substantial electrical conductivity difference between the bottom zinc foil (~16.6×10^6 S m−1) and the top SSM (~1.3×10^6 S m−1) establishes an electric field gradient. Simultaneously, a sodiophilicity gradient is created by electrochemically in-situ generated sodiophilic NaZn13 and Na2S on the bottom zinc foil, combined with the sodiophobic upper SSM layer. This dual-gradient synergy guides bottom-up sodium deposition, homogenizes current density and electric potential, and reinforces mechanical robustness. The framework exhibits outstanding electrochemical performance in both symmetric and full cells, outperforming most reported 3D structures. A pouch cell assembled with SSM-ZnS@Zn successfully lit an LED lamp, demonstrating practical application potential. This strategy surpasses single-gradient limitations and offers a new approach for high-performance sodium metal anode design.