SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4304-5
Comprehensive assessment of rehabilitation efficiency is essential for designing appropriate training programs for better musculoskeletal functional recovery. Existing contact-receptor-dependent rehabilitation assessment systems mostly focus on assessing the restoration of muscle function by evaluating grip strength or joint flexion angle; however, parameters reflecting neuromuscular synergistic function are always overlooked. Herein, we develop an ionoelastomer-based soft artificial electroreceptor (SAER) that integrates tele-perception and tactile sensation to track the rehabilitation process, collecting signals related to approaching speed and grip strength sequentially. The SAER uses polyurethane ionoelastomer incorporated with quasi-solid conductive salt as the electric field receptor, and is integrated on a rehabilitation-training ball after assembly to establish an untethered detection device; this enables the remote capture of hand approaching parameter within a 9 cm range, followed by the quantification of grip strength when contacting and grasping. Furthermore, a data-driven assessment system is established by integrating machine learning, which accurately classifies rehabilitation efficiency into six levels; it supports for rehabilitation evaluation and training programs adjustment. Overall, the SAER-based rehabilitation management system establishes a paradigm that synergistically evaluating parameters corresponding to neuromuscular functional restoration and holds strong potential for home-based active rehabilitation for minimizing dependence on frequent clinical supervision.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3652-2
Existing robotic end-effector gripping technologies often encounter challenges such as poor adaptability to environmental changes, incomplete deformation sensing, and insufficient adhesion stability, which can compromise operational safety and reliability. Here, we present the bio-inspired self-sensing suction cup, in which the core self-sensing capability is achieved by combining high-performance, laser-induced graphene/Ag NWs flexible sensors with a Wheatstone bridge design. The flexible sensors provide high sensitivity, while the Wheatstone bridge circuit enables accurate and stable detection of deformation during the gripping process. Integrated into the octopus-inspired suction cup, this system allows for real-time monitoring of deformation and adsorption stability. The self-sensing suction cup demonstrates good performance across a 0–25 kPa negative pressure range, with outstanding linearity (R2 = 0.993) and high sensitivity (GF = 10.436 kPa−1). Experimental results confirm that the suction cup can achieve stable adsorption under varying loads and enable real-time monitoring of the suction cup status during the gripping process. This design provides a promising solution for intelligent gripping systems, logistics, and object recognition in challenging environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3789-x
Wearable sensors have attracted significant attention due to their superior sensitivity, safety, and adaptability compared with conventional detection technologies. However, developing sustainable sensing materials that combine excellent performance with environmental friendliness remains a significant challenge. In this study, Juncus effusus (JE), a natural fiber featuring a unique internal three-dimensional (3D) network structure, was employed as the substrate. Conductive polyaniline was loaded onto the JE structure to impart electrical conductivity, and Ecoflex encapsulation provided high elasticity. Based on this approach, a JE-based resistive flexible sensor (PHE-JE) was successfully fabricated. The PHE-JE sensor exhibits high stability under various strain conditions, along with excellent flexibility and durability. Moreover, benefiting from its complex 3D structure and synergistic material interactions, the PHE-JE sensor enables accurate detection of diverse motion types, showing promising potential for future wearable sensing applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3856-0
Replacing the kinetically sluggish oxygen evolution reaction (OER) with biomass oxidation at photoanodes offers a cost-effective and energy-efficient route for simultaneous hydrogen production and value-added chemical synthesis in a photoelectrochemical (PEC) cell. Here, titanium-doped hematite nanorods (Hem) decorated with CoNi bimetallic zeolitic imidazolate frameworks (ZIF) were prepared via room-temperature deposition and employed as photoanodes for 5-hydroxymethylfurfural (HMF) oxidation. Using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as a redox mediator in alkaline electrolyte, the CoNi-ZIF/Hem photoanode achieved a photocurrent density of 1.09 mA cm−2 at a low bias of 1.1 V vs. reversible hydrogen electrode (RHE). Experimental results and theoretical calculations reveal that CoNi-ZIF accelerates charge transfer and separation, and enhances TEMPO adsorption on the surface, benefiting PEC TEMPO-mediated HMF oxidation to 2,5-furandicarboxylic acid (FDCA). In a flow-cell reactor under 1 sun illumination, the photoanode achieved ~99% HMF conversion and ~98% FDCA yield within 2 hours. The photoanode also exhibited excellent performance for TEMPO-mediated oxidation of various aldehyde-containing biomass-derived compounds. This work demonstrates a rational design of hematite-based photoanodes for efficient biomass valorization coupled with hydrogen production.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025102002
The ultraviolet/chlorine (UV/Cl2) advanced oxidation process generates multiple radical species, enabling synergistic disinfection. However, the systematic influence of UV intensity on process performance remains inadequately characterized. This study investigated UV intensities from 0.25 to 2.0 mW·cm−2, assessing chlorine photolysis kinetics, bacterial inactivation, and disinfection by-product (DBP) formation. Results demonstrate that inactivation efficiency is not solely governed by total UV energy but is co-regulated by reaction kinetics and mass transfer. Increasing UV intensity accelerated chlorine photolysis by 33.7%–277.8%, elevating steady-state concentrations of hydroxyl radicals and chlorine radicals by factors of 1.6–3.8 and 1.3–3.2, respectively, thereby enhancing initial inactivation rates. However, higher intensities reduced cumulative chlorine exposure (CT value) to 14.3%–55.7% of baseline, causing overall inactivation to first increase then decrease. At a fixed UV dose of 150 mJ·cm−2, an intensity of 1.0 mW·cm−2 achieved optimal 6.5-log inactivation of Escherichia coli and the lowest bacterial reactivation rate (0.07%). Common water constituents (HCO3−, Cl−, natural organic matter) inhibited disinfection, with natural organic matter exerting the strongest suppression (2.7-log reduction). Notably, 1.0 mW·cm−2 exhibited the greatest resistance to interference. Elevated intensity reduced total organic halogen formation from 33.7 μg·L−1 to 19.0 μg·L−1. Balancing disinfection efficacy and DBP risk, 1.0 mW·cm−2 is identified as the optimal UV intensity for the UV/Cl2 process in sand-filtered water treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509053
The escalating global generation of waste plastics necessitates robust recycling strategies to mitigate environmental impact and advance low-carbon development. This study employs life cycle assessment (LCA) and emission factor methodologies to quantify the carbon footprints of six distinct waste plastic valorization pathways: mechanical recycling, pyrolysis, alcoholysis, co-coking, solid fuel production, and direct incineration. The functional unit is one tonne of waste plastic, with system boundaries encompassing transportation, pretreatment, and resource utilization. The model accounts for indirect emissions from energy consumption, direct emissions from plastic decomposition, and carbon offsets from material or energy recovery. Results indicate that pyrolysis yields the highest carbon offset of approximately -3,024 kgCO2e per tonne, while mechanical recycling achieves an 88% material recovery rate and a net carbon offset of -991.4 kgCO2e. Net carbon emissions per tonne of waste plastic rank as follows: direct incineration (1,104 kgCO2e) > co-coking (185.8 kgCO2e) > solid fuel (115.4 kgCO2e) > alcoholysis (-259.5 kgCO2e) > mechanical recycling (-991.4 kgCO2e) > pyrolysis (-2,592 kgCO2e). These findings demonstrate that pyrolysis offers superior carbon reduction benefits compared to incineration, exhibiting a net-negative carbon footprint across its life cycle. The study provides a scientific basis for selecting low-carbon waste plastic valorization routes and informs carbon trading and emission reduction strategies in the solid waste sector.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3929-4
Hydrogels are extensively utilized in biomedical fields such as drug delivery, tissue engineering, and wound dressings due to their excellent biocompatibility, high water content, and tunable physicochemical properties. However, conventional hydrogels often undergo uncontrolled swelling in physiological environments, leading to mechanical degradation, structural destabilization, and functional failure, which severely restricts their long-term applicability. Recent advances have focused on developing anti-swelling hydrogels with equilibrium swelling ratios typically below 150%, achieved through strategies including the introduction of hydrophobic interactions, enhancement of cross-linking density, and incorporation of nanocomposite structures. These approaches significantly improve dimensional stability and mechanical integrity under physiological conditions. This review systematically summarizes the common preparation strategies for anti-swelling hydrogels and highlights their latest progress in biomedical applications, including wound dressings, tissue adhesives, and implantable devices. The advantages and future directions, such as smart responsiveness and multifunctional integration, are critically discussed. The review aims to provide theoretical guidance and technical references for the development of next-generation high-performance medical hydrogel materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4056-1
Nanoparticle-based therapeutics have been intensively explored for tumor treatment. However, developing convenient and specific strategies that do not rely on exogenous energy-guided activation remains challenging. Herein, an ion-exchange-driven chemodynamic therapy is proposed based on the TME K+-mediated cation exchangeability of layered ferrous silicates (LFSs). LFSs were prepared by a facile "in situ 3D-to-2D structural transformation" strategy through valence bond transition from SiO–H–OSi to Fe–O, providing extensive convenience compared to conventional exfoliation methods. The structure-activity relationship and mechanism between surrounding TME ions and the cation exchange behavior of LFSs were revealed by both experimental investigation of the cation-exchange process and DFT calculations of the adsorption hydration behavior. As a result, the interlayered Fe ions were selectively and preferentially exchanged by TME K+ rather than surrounding TME Na+, Mg2+, Ca2+, or Cl−, thereafter activating specific Fenton reaction together with TME H+, H2O2, and glutathione, demonstrating highly precise catalytic therapeutic efficacy both in vitro and in vivo. This study proposes an original tumor-specific therapy modality with high precision and safety through taking advantage of ionic exchangeability of layered silicate, and provides enlightenment to reverse the TME K+ disorder.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4215-3
The escalating demand for energy-efficient edge inference in artificial intelligence has intensified the search for hardware that transcends the von Neumann bottleneck. Ferroelectric field-effect transistors (FeFETs) are promising due to their non-destructive readout, low programming energy, and multilevel operation. However, integrating ultrathin ferroelectrics with two-dimensional (2D) channels remains challenging due to the inert surfaces of 2D materials, which impede uniform film growth. Moreover, conventional ferroelectrics like doped hafnia and AlScN suffer performance degradation at thicknesses required for sub-1V operation. The interface between ferroelectric and 2D semiconductor is often plagued by traps and parasitic layers, causing threshold drift and fatigue. In a recent Science report, Hailin Peng and colleagues present an innovative solution: a native ferroelectric buffer derived from the semiconductor itself. By oxidizing layered Bi2O2Se below 400°C, they produce wafer-scale α-Bi2SeO5, a van der Waals ferroelectric oxide. This material retains robust ferroelectricity down to the monolayer limit, supporting both out-of-plane and in-plane polarization switching. It exhibits a high relative dielectric constant (~24) and a Curie temperature near 880 K. The in-situ oxidation approach enables precise thickness control, yielding a uniform, switchable, and robust gate stack for 2D FeFETs, addressing the critical challenges of voltage scaling and interface quality.