SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4260-5
Lithium-sulfur batteries (LSBs) are recognized as a leading candidate for next-generation energy storage due to their high theoretical specific capacity (1675 mAh g⁻¹). However, the shuttle effect of lithium polysulfides (LiPSs) severely limits cycle life and energy efficiency. Here, we report a multi-interface engineering strategy employing a MnO₂-TiO₂@Ti₃C₂ MXene (MT@MX) heterojunction, synthesized via a facile redox reaction between MXene and KMnO₄, to modulate bidirectional polysulfide conversion. The 2D structure with high conductivity and abundant heterogeneous interfaces facilitates fast ion/electron transfer, reduces reaction energy barriers, and enhances adsorption via d-band center effects. The stepped built-in electric field (BIEF) in MT@MX lowers the migration energy barrier of LiPSs from catalytic MXene to TiO₂ and then to adsorptive MnO₂, enabling reversible migration across multi-interfaces. Optimized heterointerfaces synergistically integrate adsorption, diffusion, and catalytic conversion, yielding excellent cycling stability even at a high sulfur loading of 6.4 mg cm⁻². This work demonstrates that constructing heterojunctions with stepped BIEF offers a feasible approach to modulate interfacial diffusion and provides a new design strategy for high-performance LSB electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4197-4
Deep-blue organic light-emitting diodes (OLEDs) remain the most challenging primary-color emitters due to stringent exciton energy requirements. We strategically designed two innovative deep-blue emitters, SCZ-4AnCN and STPA-4AnCN, via systematic functionalization of an anthracene core with arylamino-decorated spirofluorene donors and cyano-substituted phenyl acceptors. Comprehensive theoretical and experimental analyses demonstrate that these spirofluorene-anthracene hybrids adopt precisely engineered distorted configurations, effectively suppressing detrimental intermolecular π–π stacking in condensed phases. The sp3-hybridized bridgehead carbons in spirofluorene units play a pivotal role by simultaneously restricting π-conjugation extension and fine-tuning donor–acceptor interactions, thereby stabilizing the lowest excited singlet (S1) state with dominant local excitation (LE) character. This molecular engineering yields exceptional deep-blue emission with remarkable efficiency. Notably, the materials exhibit unique high-lying reverse intersystem crossing (hRISC) behavior, enabling efficient triplet harvesting. Optimized doped devices incorporating SCZ-4AnCN achieve outstanding performance, including a maximum external quantum efficiency (EQE_max) exceeding 10% and CIE coordinates (0.154, 0.052) approaching the BT.2020 blue standard. Nondoped devices maintain impressive performance with an EQE_max of 7.51% and superior operational stability, demonstrating less than 10% efficiency roll-off at 1000 cd m−2. This work validates anthracene-based molecular architectures for deep-blue electroluminescence and establishes a transformative design paradigm for next-generation OLED emitters.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3700-7
Photocatalytic synthesis has been considered a promising technology for solar-to-chemicals conversion. Here, a series of novel photocatalysts was synthesized by decorating uranyl sites on imine-based covalent organic frameworks (i-COF) and proved functioning for the uniformly boosted H2O2 production by 1.6–10.1 folds compared with the bare i-COFs in a wide pH range from 2 to 11. Typically, an optimal H2O2 production rate of 1435.9 μmol g−1 h−1, i.e., 28.72 mmol g(U)−1 h−1, was realized over uranyl decorated TTa-COFs under visible light. Systematic investigations reveal that the universally and remarkably promoted performance is attributed to the outstanding electron-transfer ability, accelerated activation of molecular oxygen and favored formation of ·O2− and *OOH as the key intermediate by virtue of the decorated uranyl ions; thus the two-step single-electron oxygen reduction reaction (ORR) for H2O2 photo-generation is significantly facilitated. This work paves a new way for the uranyl-decorated COFs as a novel photocatalyst and provides in-depth insight to the reaction mechanism for photocatalytic H2O2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3506-3
Metallic glasses (MGs) often suffer from sluggish hydrogen evolution reaction (HER) kinetics in neutral and alkaline media, with their catalytic performance predominantly confined to acidic environments. Herein, we reported a novel thermoplastic forming technique to fabricate a self-supported partially crystallized nanoporous Pt56.2Ni5.2Cu16.8P21.8 metallic glass (C-NPMG). The C-NPMG catalyst delivers ultralow overpotentials of 18.0 mV (0.5 M H2SO4), 42.2 mV (1 M KOH), and 88.0 mV (1 M phosphate-buffered saline (PBS)) at a current density of 10 mA cm−2, outperforming most state-of-the-art non-noble MGs and Pt-based benchmarks across all pH conditions. Notably, it maintains negligible performance decay for over 1000 h in alkaline electrolytes, showcasing superior stability. Experimental and computational analyses reveal that the enhanced HER activity arises from three synergistic effects: (1) the high-specific-surface-area nanoporous architecture that maximizes active site exposure; (2) the formation of crystallite-amorphous interfaces during partial crystallization, which lowers the energy barrier for H2 desorption; (3) the hierarchical super-hydrophilic and super-hydrophobic wettability of the C-NPMG, which optimizes mass transport and prevents electrolyte-induced corrosion. This work establishes a novel design paradigm for developing high-performance, pH-universal HER electrocatalysts by integrating structural nano-engineering and crystallite-amorphous phase synergy in metallic glass systems to overcome the trade-offs between performance and stability in electrochemical water splitting.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3710-y
Layered transition metal oxide cathodes for sodium-ion batteries (SIBs) suffer from Jahn–Teller distortion of MnO6, Na+/vacancy ordering, and irreversible lattice oxygen loss, causing capacity fading and voltage decay. Here, we report a P2-type material, Na0.67Ni0.3Mn0.6Li0.09Sn0.01O2 (NNMO-Li0.09Sn0.01), co-doped with closed-shell Li+ and Sn4+ ions. Li+ increases the Mn4+/Mn3+ ratio, mitigating Jahn–Teller distortion, and disrupts Ni/Mn ordering, suppressing Na+/vacancy ordering. Sn4+ forms stronger Sn–O bonds (548 kJ mol−1), enhancing bonding between transition metal ions and oxygen, reducing oxygen loss. NNMO-Li0.09Sn0.01 delivers a specific capacity of 90.3 mAh g−1 with 62.9% capacity retention after 50 cycles at 0.1 C (1 C = 200 mA g−1), and 90.3% voltage retention. This closed-shell substitution strategy offers a viable approach for enhancing structural stability of wide-voltage layered oxide cathodes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506010
To facilitate accurate understanding and implementation of the provisions in the Technical Specification for Comprehensive Utilization of Titanium Gypsum (GB/T 45015-2024), and to promote technological capability in comprehensive utilization while effectively controlling environmental risks during utilization, this paper analyzes the current status and existing problems of titanium gypsum generation, management, and utilization technologies in China. The standard is systematically interpreted. It is concluded that the implementation of this standard will promote resource utilization of titanium gypsum, foster energy conservation and carbon reduction in the titanium dioxide industry, and further safeguard ecological and environmental security. China produces over 3,120×10^4 t of titanium gypsum annually (2023), yet its comprehensive utilization rate is only about 10%, far lower than that of phosphogypsum (~40%) and desulfurization gypsum (~80%). The standard, as the first national standard dedicated to titanium gypsum resource utilization, establishes technical pathways for building materials and ecological restoration, sets limits for soluble impurities, and specifies pollution control indicators throughout the utilization process. It addresses the long-standing gaps in technical standards, product quality variability, and environmental supervision, providing critical support for the green and low-carbon transformation of the sulfuric acid process titanium dioxide industry.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507027
Ammonia nitrogen (NH3-N) is a common water pollutant that can induce eutrophication and threaten aquatic ecosystems and human health. Accurate monitoring is essential for water safety. This study applied a self-developed gas-permeable membrane-based conductivity sensor (GPMCS) for real-time in-situ monitoring of NH3-N in two water bodies. In the Qunying River (surface river water), GPMCS captured concentration fluctuations linked to pump operations and sewage intrusion, with mean inlet and outlet concentrations of 4.67 and 3.42 mg/L, respectively. In Swan Lake (landscape aquaculture water), concentrations reached up to 11.16 mg/L, with site means of 6.42 and 7.04 mg/L, influenced by aquaculture activities, weather, and location. GPMCS results correlated strongly with national standard methods (r1=0.8132, r2=0.7483), confirming accuracy and reliability. Compared to existing techniques, GPMCS offers high selectivity, strong anti-interference, portability, no sample pretreatment, low cost, and environmental friendliness, making it suitable for long-term in-situ monitoring. This technology provides robust support for sustainable water environment management.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507030
Arsenic is a toxic metalloid predominantly present in water as As(V) and As(III), whose speciation governs toxicity and mobility. Conventional speciation methods (HPLC-ICP-MS, IC-HG-AFS) offer ultralow detection limits but suffer from high cost, long analysis times, and non-portability, hindering on-site rapid monitoring. This study presents a sulfide-based spectrophotometric method exploiting the quantitative reaction between As(V) and S2− to form monothioarsenate (H3AsO3S) with a characteristic absorption at 233 nm. Under optimized conditions (H+ concentration 1 mol·L−1, Na2S dosage 5 mmol·L−1, reaction time 3 min, N2 purging 2 min), As(V) is directly quantified. Total arsenic is determined after complete oxidation of As(III) to As(V) using NaClO (10 mmol·L−1, pH 12, 5 min), and As(III) is obtained by difference. The method exhibits linearity over 0.5–50 mg·L−1 (A = 0.0209c + 0.0627, R² = 0.999), a detection limit of 0.17 mg·L−1, spike recoveries of 101.9%–104.1%, and relative standard deviation of 1.06%. Validation against real industrial wastewater samples showed relative deviations <10% compared with HPLC-ICP-MS and IC-HG-AFS. Total analysis time is within 15 min. The method is simple, cost-effective, and suitable for field monitoring.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0028
Pyrolysis is a key route for the graded conversion of low-rank coal, yet the volatiles are rich in oxygenates and heavy components, limiting direct utilization. This study proposes a tandem catalytic system combining metal oxides and ZSM-5 zeolite to efficiently convert lignite pyrolysis volatiles into light aromatics (benzene, toluene, ethylbenzene, xylene, naphthalene, methylnaphthalene). The upper-layer metal oxide pre-cracks large molecules and removes oxygenates, reducing carbon deposition on the zeolite and extending catalyst life. Among metal oxides tested, strongly basic MgO exhibited superior cracking and deoxygenation performance. Compared to ZSM-5 alone, the MgO/ZSM-5 tandem system increased total light aromatics yield by approximately 20% to 21.5 mg/g, while maintaining liquid product proportion at 21.4%. The incorporation of MgO also significantly reduced coke deposition on ZSM-5, preserving its catalytic activity and potentially prolonging its operational lifespan. These findings provide a theoretical basis for upgrading low-rank coal pyrolysis volatiles to valuable light aromatics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010603
The global production, inventory, and retirement of lithium-ion batteries are increasing, while new technologies and materials for safety introduce various binders, lithium salts, flame retardants, and solvents, some of which may be emerging pollutants (EPs). This study identifies 43 EPs across 6 categories in the entire life cycle of lithium-ion battery production. Electrolytes contain the most EPs, including per- and polyfluoroalkyl substances (PFASs) lithium salts and solvents, as well as organophosphorus flame retardants. Production emissions of 1,3-butadiene (1,3-BD), dichloromethane (DCM), and N-methylpyrrolidone (NMP), and release of ultra-short-chain PFASs such as bis(trifluoromethylsulfonyl)imide (NTf2) and trifluoromethanesulfonamide (TfNH2) from discarded batteries require attention. Health risk assessments at production and disposal sites show that DCM poses the highest carcinogenic risk at production sites, exceeding the EPA's basic carcinogenic risk value of 1×10−6 but below the critical value of 1×10−4, with non-carcinogenic risk below the EPA threshold of 1. At disposal sites, tris(1,3-dichloro-2-propyl)phosphate (TDCPP) poses the highest carcinogenic risk, below 1×10−6, while tri(2-chloropropyl)phosphate (TCPP) exhibits the highest non-carcinogenic risk, below 1. Comparison of domestic and international regulations highlights gaps in domestic regulations. Recommendations include tiered management of similar-function chemicals, research on alternatives for high-risk chemicals, implementation of clean production mechanisms, establishment of green product standards, and development of guidelines for managing EPs. This study comprehensively summarizes EPs in the lithium-ion battery life cycle, providing technical support for their management.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112101
The biological reduction of Cr(VI) to less hazardous Cr(III) is a promising strategy for remediating Cr(VI)-contaminated sites. Both biochar and riboflavin can act as electron shuttles to accelerate this bioreduction process, yet their combined effects remain poorly understood. Using Shewanella oneidensis MR-1 as a model reducing bacterium, we investigated the joint influence of biochar (average particle size 28.85 μm) and riboflavin at high (1 mmol·L−1) and low concentrations on Cr(VI) bioreduction. Individually, biochar and high-concentration riboflavin enhanced indirect electron transfer, accelerating Cr(VI) removal. However, when combined, the fast-phase reaction rate (rf0) did not significantly improve compared to single amendments. The combined action factor revealed an antagonistic inhibition between biochar and riboflavin. Mechanistically, high-concentration riboflavin saturated biochar's adsorption sites (equilibrium concentration 0.96±0.04 mmol·L−1), hindering biochar's role as an electron conduit. With a bacterial density of 3.4×10^7 cells·mL−1, the inter-bacterial distance (30.87 μm) exceeded biochar's particle size, and the per-cell riboflavin concentration (2.9×10−2 pmol·cell−1) was sufficient for riboflavin to dominate as the primary electron shuttle, while biochar's surface became coated, reducing its efficacy. These findings reveal the complex interplay between biochar and soluble organic matter in Cr(VI) bioreduction, underscoring the need to consider such antagonistic effects when designing bioremediation strategies for multi-component contaminated environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4028-5
The escalating thermal management demands of modern electronics necessitate materials with superior thermal conductivity and matched thermal expansion. Cu/Diamond composites are promising, yet their fabrication typically requires extreme conditions (high temperature/pressure) or complex coating processes. This work introduces a one-step, heat-source-free cold manufacturing method using ultrasonic vibration to consolidate Cu/Diamond composites at room temperature and a low pressure of ~16 MPa within seconds. The applied pressure is reduced by 200–500 times, and the required temperature is only 20% of that used in conventional high-temperature high-pressure sintering. Direct metallurgical bonding at Cu-Cu interfaces and solid embedding of diamond particles in the Cu matrix are achieved, yielding a composite with a high yield strength of 150 MPa. The method enables a maximum diamond proportion of ~60%, resulting in a thermal conductivity exceeding 1043 W/(m·K) and a coefficient of thermal expansion below 10×10⁻⁶ K⁻¹. Complex shapes are readily fabricated, and heat dissipation tests demonstrate superior performance compared to commercial Al₂O₃ and AlN substrates. The loose preparation conditions and rapid processing confer significant industrial production potential.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61116-X
A standardized dataset of linear sweep voltammetry (LSV) curves is presented for evaluating the oxygen reduction reaction (ORR) performance of carbon-supported catalysts in acidic media. All electrochemical tests were conducted in O2-saturated 0.5 mol L−1 H2SO4 at controlled rotation speeds using a rotating disk electrode. The dataset comprises 120 validated entries from both non-precious metal (MNC) and platinum-based (Pt-MC) catalysts, including original LSV curves and extracted performance parameters such as onset potential, half-wave potential, and limiting current densities at different rotation speeds. Data processing involved potential conversion to the reversible hydrogen electrode (RHE) scale, background subtraction, outlier removal, and reproducibility checks with defined quality control thresholds (relative standard deviation ≤2% for E1/2 and ≤5% for limiting current). The standardized collection serves as a reliable benchmark for catalyst performance comparison, supports kinetic and mass transport analysis, and provides a structured data source for machine learning applications in electrocatalysis. The dataset is openly available via Science Data Bank, with a DOI, and is intended as a dynamic resource for the ORR electrocatalysis community.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011804
Per- and polyfluoroalkyl carboxylic acids (PFCAs) are persistent organic pollutants whose isomers exhibit distinct environmental behaviors, bioaccumulation potentials, and toxic effects due to structural variations. Accurate identification of PFCA isomers is critical for risk assessment and pollution control, yet existing detection methods predominantly rely on standard references, posing challenges for precise analysis of isomers with subtle structural differences. Single-molecule electrochemical sensing via nanopores offers a standard-free approach by correlating molecular volume with current blockade, but its capability to distinguish PFCA isomers remained unverified. This study targeted three sets of PFCA isomers: 4,5,5-trifluoropent-4-enoic acid vs. 4,4,4-trifluoro-3-methylbut-2-enoic acid; 3,3,3-trifluoro-2-methylpropanoic acid vs. 4,4,4-trifluorobutanoic acid; and 2-(trifluoromethoxy)acetic acid, 3,3,3-trifluorolactic acid, and (2R)-3,3,3-trifluoro-2-hydroxypropanoic acid. By engineering nanopore interfaces (WT, R220N, R220Q Aerolysin) and extracting multi-dimensional characteristic parameters, the method achieved near 100% accuracy in identifying all seven isomers. Feature selection further enabled high classification accuracy with low data volumes, laying the foundation for rapid single-molecule detection of PFAS and other emerging contaminants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3956-0
Chiral organic-inorganic hybrid metal halides (OIHMHs) are multifunctional materials with structural diversity and chiroptical properties. However, current chiral OIHMHs predominantly exhibit circularly polarized luminescence (CPL) in the visible spectrum, while ultraviolet and near-infrared (NIR) CPL remains challenging. Here, we report lead-free chiral zero-dimensional (0D) OIHMHs, (R/S-DACH)2In2Br10:Sb3+/Yb3+ (DACH = 1,2-diaminocyclohexane), featuring spectrally tunable CPL emissions covering visible to NIR regions. Single-crystal X-ray diffraction, circular dichroism, and CPL spectroscopy revealed that robust hydrogen-bonding interactions between organic cations and inorganic emitters are crucial for chirality expression. Sb3+-doped (R/S-DACH)2In2Br10 single crystals exhibited intense broadband emission at 644 nm from the 3P1 to 1S0 transition of Sb3+, achieving a record photoluminescence quantum yield (PLQY) of 49.9% (two orders of magnitude higher than pristine crystals) and a luminescence dissymmetry factor (glum) of ±7.1×10−3. Notably, Sb3+/Yb3+ co-doped crystals simultaneously generated dual-band CPL at 644 nm (glum = ±2.1×10−2) and 994 nm (glum = ±6.8×10−3), representing an important example of NIR-CPL in OIHMHs. An LED device based on (R-DACH)2In2Br10:2.7%Sb3+ exhibited bright orange emission with a color-rendering index of 78.4 and excellent spectral and operational stabilities. These findings establish a design strategy for broadband CPL and expand applications of chiral metal halides in advanced optoelectronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3829-7
Circularly polarized luminescence (CPL) is pivotal for advanced photonic applications, yet achieving concurrent high emission efficiency and large dissymmetry factors remains challenging. Here, we report a chiral reticular chemistry strategy to construct homochiral porous metal-organic frameworks (MOFs) as efficient CPL-active materials. By co-assembling enantiopure R/S-binol with achiral luminescent ligands, three pairs of enantiomeric pillar-layered MOFs were synthesized. These frameworks exhibit significantly amplified CPL responses, with |g_lum| values enhanced by up to two orders of magnitude compared to free ligands, reaching levels comparable to state-of-the-art chiral assemblies, while maintaining high photoluminescence efficiencies (Φ_PL up to 67%). Mechanistic investigations reveal that CPL originates primarily from the global chirality of the hierarchical frameworks rather than the intrinsic chirality of the precursors. This work establishes a robust design principle for porous CPL-active materials, offering new insights into chirality transfer and opening avenues to integrate strong luminescence with stable chirality in extended frameworks.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509124
To reveal the spatiotemporal evolution and driving mechanisms of water quality in the Hanjiang River Basin, this study utilized monthly water quality monitoring data from 54 sections from January 2021 to April 2024. Methods including single-factor index, comprehensive water quality index (WQI), principal component analysis (PCA), and optimal parameters-based geographical detector (OPGD) were employed. Results indicated significant spatiotemporal differences, with total nitrogen (TN), chemical oxygen demand (COD), and permanganate index (CODMn) as major pollutants, TN being the most critical. Temporally, agricultural non-point source organic pollution dominated in wet season, while comprehensive organic pollution with industrial point source characteristics prevailed in dry season. Spatially, water quality deteriorated along the main stream, with tributary downstream areas showing severe pollution, forming a pattern of 'mountainous areas good, plains poor'. OPGD revealed combined effects of natural conditions and human activities, proposing a 'zonal control and targeted treatment' strategy.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022801
Paddy soils are a major source of agricultural methane (CH4) emissions. Biochar is widely applied to paddy soils, while dissolved organic matter (DOM) is ubiquitous; both can regulate CH4 emissions by mediating electron transfer processes, yet their synergistic mechanisms remain unclear. This study investigated the individual and combined effects of biochar and the DOM model compound anthraquinone-2,6-disulfonic acid (AQDS) on CH4 emissions from paddy soil during incubation. Biochar amendment increased DOM concentration and accelerated extracellular electron transfer, resulting in a maximum cumulative CH4 emission of (66.23±16.20) μmol, four-fold higher than the control (15.14±0.18) μmol. In contrast, AQDS addition markedly suppressed CH4 accumulation to (1.04±0.09) μmol, attributed to sulfate introduction as a competitive electron acceptor, despite enhanced electron exchange. The combined biochar-AQDS treatment yielded intermediate CH4 accumulation of (12.71±0.32) μmol. Although DOM availability increased, sulfate-driven electron competition inhibited methanogens, and the combined treatment favored the acetoclastic methanogenesis pathway, which produces less CH4 per unit acetate, resulting in lower emissions than biochar alone but higher than AQDS alone, indicating an additive effect. These findings elucidate the mechanisms by which biochar and DOM jointly regulate CH4 emissions from paddy soils, providing a theoretical basis for agricultural management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3976-x
The discovery of high-temperature superconductivity in bilayer nickelate La3Ni2O7−δ (La-327) under high pressure and in thin films at ambient pressure has opened new avenues in superconductivity research. However, La-327 exhibits a narrow phase stability range, leading to stacking faults that suppress bulk superconductivity. Chemical substitutions, particularly at the A-site with smaller rare-earth ions, have been shown to enhance phase purity and reduce stacking faults, while also increasing the orthorhombic distortion and chemical pressure. In this work, we apply the high-entropy (HE) strategy to stabilize the 327 phase with reduced average A-site ionic radius (rA). We successfully synthesized medium-entropy La1.2Pr0.6Nd0.6Sm0.6Ni2O7−δ (ME-327) and high-entropy La0.67Pr0.67Nd0.67Sm0.33Eu0.33Gd0.33Ni2O7−δ (HE-327) polycrystalline samples. These compositions satisfy medium- and high-entropy criteria, with rA values of 1.181 Å and 1.164 Å, respectively. The samples are phase-pure and homogeneous. HE-327 exhibits the lowest cell volume, largest orthorhombicity, and shortest interlayer Ni-Ni distance among reported bilayer nickelates. Physical property measurements reveal low electrical conductivity and a high density-wave (DW) transition temperature. Under high pressure, HE-327 shows a resistivity anomaly at 103 K under 31 GPa, suggesting a possible superconducting transition. Extrapolation indicates that Tc under high pressure exceeds 100 K for HE-327, correlating with reduced rA and enhanced interlayer coupling. Our results demonstrate the ionic size effect and the effectiveness of the HE approach in stabilizing bilayer nickelates, providing a new avenue for developing superconducting materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4053-5
The rapid and efficient removal of radioactive iodine species from water is critical for nuclear waste treatment, particularly given the short half-life of 131I (8.02 days). Traditional porous inorganic materials exhibit low uptake capacities (<1 g g−1), while porous frameworks such as MOFs and COFs achieve high capacities (>5 g g−1) but suffer from slow removal kinetics, often requiring hours to capture 80% of iodine. This study introduces nonporous naphthobipyrrole-based organic cages (NBP-Cages) that demonstrate ultrafast iodine removal from water. Among the materials tested, type-II Me-NBP-Cage and Et-NBP-Cage, prepared via reprecipitation, exhibit amorphous morphology with small particle sizes (2–6 μm) and low BET surface areas (33.4 and 2.3 m2 g−1, respectively). Despite their nonporosity, these materials achieve >99% iodine removal within seconds, outperforming previously reported sorbents. The adsorption performance correlates with particle size and morphology: amorphous, small particles with effective surface gaps show superior kinetics. The materials are recyclable; for instance, Et-NBP-Cage can be regenerated by washing with acetonitrile, maintaining removal efficiency over five cycles. This work highlights the potential of nonporous organic cages as high-performance iodine sorbents, addressing the critical need for materials that combine high uptake capacity with rapid removal kinetics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021301
Lithium cobalt oxide (LCO) nanoparticles (NPs), generated during the lifecycle of LCO batteries via mechanical wear, pose respiratory health risks. This study systematically assessed LCO NPs' physicochemical properties, ion release, and immunotoxicity using multi-scale models. LCO NPs exhibited irregular morphology, layered crystal structure, good dispersion, and negative surface charge. Cobalt ion release was minimal: 1.03% in deionized water and 0.11% in cell culture medium. In vitro, LCO NPs significantly induced reactive oxygen species (ROS) production and secretion of pro-inflammatory cytokines (IL-6, IL-1β, TNF-α) in macrophages, promoting M1 polarization. In vivo, intranasal exposure caused dose-dependent pulmonary accumulation, alveolar destruction, inflammatory cell infiltration, and elevated cytokines in bronchoalveolar lavage fluid (BALF). Transcriptomic analysis revealed significant enrichment of NF-κB, JAK-STAT, and Toll-like receptor signaling pathways, implicating these in macrophage activation and inflammation amplification. This multi-level study elucidates LCO NPs' immunotoxicity mechanisms, providing a scientific basis for environmental health risk assessment and management of lithium-ion battery materials.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60695-0
The direct carbonylation of glycerol with CO2 to glycerol carbonate represents a promising route for CO2 utilization, addressing both carbon emission reduction and the synthesis of value-added chemicals. However, the reaction is thermodynamically limited, resulting in low glycerol conversion, necessitating the use of coupling agents and appropriate catalysts. This review systematically examines recent progress in homogeneous catalysts (inorganic and organic bases) and heterogeneous catalysts (Zn, Cu, Ce, La, Mg, noble metals, modified zeolites, non-metallic materials) for this transformation. Strategies such as metal oxide modification, support optimization, precursor selection, and construction of acidic-basic sites are analyzed for enhancing catalytic performance. The effects of coupling agents including acetonitrile, adiponitrile, 2-cyanopyridine, MgCO3, CaC2, and NaHCO3 are summarized. Notably, 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), Zn(QTf)2, and metal composite oxides like ZnO-CeO2 have demonstrated promising catalytic performance. Future research directions include developing organometallic complexes or composite metal oxides with highly dispersed active sites and tailored morphologies to modulate surface area, pore size, and acidity/basicity; optimizing coupling agents or designing novel membrane reactors to improve glycerol conversion; and introducing polar solvents to enhance reactant adsorption and activation. These approaches provide valuable references for catalyst design and reaction system optimization in the carbonylation of glycerol with CO2.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040102
Calcium peroxide (CaO2) with a rich porous structure was synthesized via chemical precipitation for efficient fluoride removal from aqueous solutions. The adsorbent was characterized by SEM, BET, LPSA, and XRD, revealing a mesoporous material with a total pore volume of 0.51 cm3·g−1. Batch experiments investigated the effects of adsorbent dosage, initial fluoride concentration, reaction time, pH, and coexisting anions. Adsorption kinetics followed a fractal-like pseudo-first-order model, with intraparticle diffusion as the rate-limiting step. Equilibrium data were well described by the Sips isotherm, predicting a maximum adsorption capacity of 479.8 mg·g−1. Site energy distribution analysis indicated a normal distribution with an average energy of 13.36 kJ·mol−1. Mechanistic studies using FTIR and XPS revealed that fluoride removal proceeds via surface precipitation, ligand exchange, and electrostatic attraction. The high density of active sites contributes to the exceptional defluoridation performance, positioning CaO2 as a promising adsorbent for fluoride-contaminated water treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607013
This study investigated the synergistic effects of earthworm mucus and two biochar types (rice husk biochar and straw biochar) on heavy metal bioavailability during sludge composting. Sludge was amended with earthworm mucus alone or combined with biochars at varying proportions, and the impacts on physicochemical properties, total heavy metal concentrations, bioavailable fractions, and chemical speciation were analyzed. Results showed that mucus addition increased sludge pH and electrical conductivity (EC) but decreased total nitrogen (TN) and total phosphorus (TP) contents. Synergistic mucus-biochar composting further elevated pH and EC while reducing TN, with the optimal treatment being mucus plus 10% rice husk biochar. Mucus-only composting reduced total concentrations and bioavailability of Cd, Cu, Ni, Zn, and Pb. Adding biochars significantly enhanced these reductions. Specifically, mucus with rice husk biochar achieved the best Cd removal, with total and bioavailable Cd decreasing by 27.03%–55.68% and 9.52%–28.57% (P<0.05), respectively, compared to controls. Mucus with straw biochar was most effective for Ni, Zn, and Pb, reducing total contents by 3.81%–5.72%, 7.93%–34.62%, and 42.61%–79.46%, and bioavailable fractions by 2.90%–26.31%, 15.58%–24.14%, and 32.30%–36.88% (P<0.05), respectively. Speciation analysis revealed that Cd, Ni, and Pb carbonate-bound fractions transformed into residual forms, and exchangeable fractions shifted to Fe-Mn oxide-bound forms. Straw biochar addition resulted in the highest residual fractions for Cd, Cu, Ni, Zn, and Pb, increasing by 0.35%–7.02%, 8.61%–12.90%, 16.62%–23.02%, 17.33%–26.10%, and 16.12%–27.20% (P<0.05), respectively. These findings demonstrate that earthworm mucus combined with rice husk or straw biochar effectively reduces heavy metal concentrations and bioavailability in sludge, offering a promising strategy for sludge composting.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60658-5
Sulfur dioxide emitted from combustion of sulfur-containing aromatic compounds in fuels is a major contributor to atmospheric pollution. Oxidative desulfurization (ODS) has become a crucial complement to hydrodesulfurization (HDS) due to its mild reaction conditions and high efficiency in removing refractory aromatic sulfides. Metal doping is an effective strategy to modulate the electronic structure of catalysts and enhance catalytic performance. In this study, Mn-doped Co-V-O metal oxide (Mn-Co-V-O) was synthesized via a reflux method followed by high-temperature calcination. The structure, morphology, and surface chemical composition were characterized by FT-IR, XRD, SEM, XPS, and UV-vis DRS. The ODS performance toward dibenzothiophene (DBT) was evaluated using molecular oxygen as a green oxidant. Results indicated that Mn doping significantly enhanced the ODS activity compared to undoped Co-V-O. Under optimized conditions (110 °C, 0.03 g catalyst, 150 mL/min O2 flow, 20 mL model oil), a direct DBT removal rate of 81.6% was achieved. When combined with extraction, the desulfurization rate increased to 98.0%. Mechanistic studies revealed that Mn doping increased the surface oxygen vacancy concentration, facilitating oxygen activation to generate superoxide radicals (·O2−). Radical trapping experiments confirmed that ·O2− was the key active species responsible for selective oxidation of DBT to DBTO2. This study provides a reference for designing efficient metal oxide catalysts for deep oxidative desulfurization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3998-8
Constitutional isomerism in covalent organic frameworks (COFs) has emerged as a powerful strategy to tailor material properties for photocatalytic applications. Here, we report the design and synthesis of two isomeric multicomponent COFs (MC-COFs) via Schiff-base condensation followed by Povarov reaction, converting imine linkages into quinoline structures. These isomeric MC-COFs exhibit opposing C=N bond orientations and distinct phenyl group alignments within the COF pores, leading to different torsion angles in the COF layers. Structural analyses reveal that enhanced planarity promotes π-π stacking and electron delocalization, resulting in favorable band structures and reduced exciton binding energies. Consequently, the optimized COF achieves a superior hydrogen peroxide (H2O2) production rate of 3128 μmol g−1 h−1 under visible light irradiation. This work underscores the critical influence of structural isomerism on the photocatalytic efficiency of MC-COFs and provides insights for rational design of high-performance COF-based photocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4074-6
Achieving carbon neutralization relies heavily on green hydrogen and electrochemical carbon-nitrogen cycles. However, the complexity of these systems and the cost of traditional Edisonian trial-and-error methods hinder rapid progress. Artificial intelligence (AI) has emerged as a transformative tool, enabling high-throughput data processing and dynamic adaptation. This review surveys the landscape of AI-driven electrochemistry, bridging the gap from atomic-scale design to industrial-scale implementation. Specifically, we focus on three areas: atomic structure-function decoding, fully automated “self-driving” laboratories, and macro-scale simulations for device durability. Furthermore, we elucidate the critical challenges in integrating AI with materials science. By mapping current trends and future directions, this work aims to unlock the full transformative potential of AI in next-generation energy storage and conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4334-9
Piezoelectric materials underpin modern electromechanical energy conversion, serving as critical components in sensors, actuators, and energy harvesters. Their performance is intrinsically governed by the piezoelectric coefficient, yet optimizing this property remains challenging due to the profound influence of diverse microscopic structures. This review systematically examines three fundamental crystalline architectures—perovskite, wurtzite, and fluorite—and critically analyzes performance optimization strategies tailored to each structure. We explore five principal modification approaches: defect engineering, elemental doping, heterostructure film fabrication, composite film design, and buffer layer incorporation, with emphasis on the underlying physical mechanisms that drive property enhancements. By providing a cross-structural comparison, this review establishes clear structure–property relationships, offering a foundational guide for material selection and design. Furthermore, we highlight the implications of these advanced materials for next-generation applications in energy harvesting and smart devices. Finally, we present a forward-looking roadmap, outlining emerging research directions and addressing key technical challenges to guide the development of next-generation high-performance piezoelectric materials.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0006
The oxygen reduction reaction (ORR) is a critical cathode reaction in fuel cells and metal-air batteries, yet its sluggish kinetics and high overpotential severely limit device performance. Conventional platinum-based catalysts suffer from prohibitive cost (accounting for up to 40% of total fuel cell system cost), scarce reserves, and poor tolerance to methanol and carbon monoxide, impeding large-scale commercialization. This review systematically summarizes recent advances in biomass/coal-based carbon materials as ORR electrocatalysts, focusing on raw material characteristics, preparation methods, structural regulation, and performance evaluation. Biomass and coal precursors offer advantages of low cost, abundant availability, and natural heteroatom doping (N, P, S), enabling the design of high-performance, metal-free catalysts. Key challenges include ensuring raw material homogeneity, precise control of active sites, and scalable synthesis. Future research directions emphasize optimizing pore structure and surface chemistry to enhance four-electron selectivity and stability. The review provides theoretical guidance for developing cost-effective ORR catalysts to replace platinum, thereby accelerating the deployment of clean energy technologies.