SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4435-9
Organic room-temperature phosphorescent (RTP) materials exhibit large Stokes shifts, high signal-to-noise ratios, and long emission lifetimes, positioning them as promising candidates for advanced anti-counterfeiting, bioimaging, sensing, and display technologies. Despite significant progress in molecular design—including radical-based systems, crystal engineering, host-guest doping, polymer matrix confinement, and supramolecular assembly—the integration of these materials with 3D printing remains in its infancy. This review critically examines the design strategies and research advances in 3D-printed organic RTP materials, focusing on the fundamental photophysical processes of intersystem crossing and suppression of non-radiative transitions. We analyze how printing parameters, matrix rheology, and layer-by-layer deposition influence phosphorescence quantum yields and lifetimes. Key challenges such as oxygen quenching, thermal degradation during extrusion, and poor interlayer adhesion are discussed with quantitative benchmarks. The review highlights that current 3D-printed RTP systems achieve lifetimes up to 1.2 s and quantum yields of 12% under ambient conditions, but scalability beyond 100 cm² remains limited by nozzle clogging and slow curing kinetics. By mapping material formulation to printability, we identify operational windows for extrusion-based and vat photopolymerization techniques. This work provides a roadmap for engineers to transition RTP materials from laboratory-scale demonstrations to industrial fabrication of complex 3D architectures with persistent luminescence.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4420-7
Cu2-xSe is a leading p-type thermoelectric material owing to its phonon-liquid electron-crystal (PLEC) behavior, yet the atomic-scale mechanisms governing Cu+ migration remain unresolved. This study employs in situ high-resolution neutron diffraction coupled with maximum entropy method (MEM) analysis to map the temperature-dependent evolution of Cu+ nuclear density in β-Cu2Se and β-Cu1.95Se. At 398–423 K, intra-tetrahedral Cu 8c ↔ 32f <111> hopping emerges, with isosurface values of 0.505 fm Å-3 for β-Cu2Se and 0.484 fm Å-3 for β-Cu1.95Se. Above 448 K, inter-tetrahedral pathways form via Cu 32f ↔ 32f <100> or 32f ↔ 4b ↔ 32f <111> migration, as revealed by line scans along [1̅11̅] up to 723 K. The presence of Cu vacancies (x = 0.05) alters the onset and connectivity of these pathways, directly impacting phonon scattering and electron transport. These findings establish a structural basis for controlling Cu+ mobility, offering a rational route to mitigate Cu precipitation and enhance zT stability beyond 1.5 at 900 K. The work bridges microstructural dynamics and thermoelectric performance, providing critical guidance for defect engineering in superionic thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3947-3
Fiber photodetectors (FPDs) with high deformability, flexible designability, and seamless integrability with everyday textiles hold tremendous potential for next-generation wearable optoelectronics. Inorganic semiconductors (ISCs) are considered ideal building blocks to design and govern the functions of FPDs owing to their superior electrical and optical properties. Recent developments in wearable technology of ISCs, especially in fiber form factor, have driven the creation of various FPDs with smart capabilities, from light sensing, information interfacing, to sophisticated logic operating, revolutionizing human-machine interaction paradigms in many emerging fields. Herein, we present a comprehensive review of recent progress of ISC-based FPDs. Firstly, key design principles for ISC-based FPDs are explored, encompassing material selection, fabrication technologies, device architectures, and textile integration strategies. Then, how defect engineering, alignment engineering, and heterojunction engineering of ISCs can control the optoelectronic performance of FPDs is examined. Following this, potential wearable applications of ISC-based FPDs in optical communication, image sensing, and health monitoring are analyzed. Finally, the challenges and perspectives for the design of high-performance ISC-based FPDs are outlined.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112103
Coal-fired boilers are significant anthropogenic sources of metal emissions, contributing over half of certain toxic heavy metal releases. Metal stable isotopes have been widely applied to trace metal pollutants from coal-fired power plants and other sources. However, complex physicochemical processes within boilers induce isotopic fractionation between raw coal and combustion products, complicating source tracing. This review outlines the structure and operational principles of coal-fired boiler systems, focusing on recent advancements in understanding the isotopic fractionation behavior of mercury (Hg), zinc (Zn), cadmium (Cd), and lead (Pb) during coal combustion and flue gas emission. These elements exhibit distinct fractionation patterns due to volatility and condensation dynamics. For instance, Hg, being highly volatile, undergoes significant mass-dependent and mass-independent fractionation, while semi-volatile elements like Cd and Zn show enrichment in fine fly ash. The review emphasizes the necessity of characterizing boiler-specific fractionation factors to improve the accuracy of isotopic tracing. It synthesizes field measurements and laboratory studies, highlighting that fractionation magnitudes can exceed analytical uncertainties by tens of times. The paper also discusses the influence of air pollution control devices (APCDs) such as selective catalytic reduction (SCR) and electrostatic precipitators (ESP) on isotope signatures. Ultimately, this work provides a framework for using metal isotopes as robust tracers in environmental forensics, underscoring the need for comprehensive understanding of boiler processes to interpret isotopic data correctly.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112102
Based on the 2022 activity data of non-road mobile sources in Hebei Province, this study employed the emission factor method recommended by the Guidelines to estimate emissions of CO, HC, NOx, PM2.5, PM10, and SO2. A comprehensive emission inventory was established, followed by spatial and uncertainty analyses. Scenario analysis, aligned with the 14th Five-Year Plan policies, was used to project emissions for 2030. The results indicate that non-road mobile sources in Hebei emitted 76.1×10^3 t of CO, 20.6×10^3 t of HC, 164.0×10^3 t of NOx, 8.5×10^3 t of PM2.5, 9.0×10^3 t of PM10, and 2.4×10^3 t of SO2. Agricultural machinery was the dominant contributor to CO, HC, PM2.5, and PM10, accounting for over 60.0% of CO emissions. Railway locomotives were the primary source of NOx, contributing 50.9%. For SO2, agricultural machinery and railway locomotives contributed 39.0% and 44.4%, respectively. The highest emitting cities were Tangshan (21.3%), Shijiazhuang (15.7%), Cangzhou (11.6%), and Handan (11.6%). Ship emissions were concentrated in Tangshan Port; civil aviation emissions were mainly in Shijiazhuang, Tangshan, Qinhuangdao, and Handan; railway emissions were distributed in Shijiazhuang, Baoding, and Handan. Under the updated emission standard scenario, NOx and PM10 emissions in 2030 could be reduced by approximately 35.0%. The phase-out of old machinery yielded the largest reduction in CO (36.0%), while both electrification and phase-out scenarios significantly impacted HC emissions.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225185
Sulfur hexafluoride (SF6), widely used as an insulating gas in high-voltage electrical equipment, possesses a global warming potential (GWP) 25,200 times that of CO2, necessitating efficient degradation technologies. This study employed computational fluid dynamics (CFD) to simulate the thermal catalytic degradation of SF6 in a fixed-bed reactor, integrating models for porous media, heat transfer, turbulence, and chemical kinetics. The simulations revealed significant radial non-uniformities in pressure, velocity, temperature, and species concentration distributions, with temperature identified as the dominant factor influencing degradation efficiency. Radial temperature gradients caused uneven reaction rates, with degradation rates near the wall substantially exceeding those at the central axis, thereby reducing overall SF6 conversion. To address this, structural optimizations were implemented, including reducing the reactor tube diameter and incorporating inert porous media with high thermal conductivity at both ends of the catalytic section. These modifications enhanced radial heat transfer, homogenized the temperature field, and improved the uniformity of reaction rates and species concentrations. Parametric studies on inlet gas velocity showed that both excessively low and high flow rates were detrimental: low velocities led to underutilization of the downstream catalyst and increased energy consumption, while high velocities deteriorated heat transfer and exacerbated radial temperature gradients. The optimal inlet velocity range was determined to be 0.4–0.8 m/s for a reactor tube inner diameter of 10 mm, balancing catalyst utilization, energy consumption, and degradation efficiency. This research provides data-driven guidance for the design and scale-up of SF6 catalytic degradation reactors.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025112603
The cycloaddition of carbon dioxide (CO2) to epoxides (CCE) is a 100% atom-economical transformation yielding cyclic carbonates, which are valuable chemical products. This reaction valorizes CO2 as a carbon feedstock, mitigating the greenhouse effect and aligning with carbon neutrality goals. Conventional covalent organic framework (COF) catalysts often require co-catalysts to achieve high efficiency. To address this, we designed and prepared a series of ionic COFs, denoted EB-BT(nOH), that simultaneously incorporate acid (hydroxyl), base (nitrogen), and nucleophilic bromide (Br−) functionalities. These materials efficiently catalyze the CCE reaction without any co-catalyst. Among them, EB-BT(OH) exhibited the highest catalytic activity, achieving a 99% yield of the target product at 120 °C and 2.0 MPa CO2 pressure. By systematically varying the hydroxyl content in the COF backbone, we investigated the critical role of hydrogen bond donors (HBDs) in the CCE reaction. This work provides new design principles for COF-based catalysts for CCE, eliminating the need for co-catalysts and enhancing process sustainability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030302
A novel core-shell composite adsorbent, C18-SiO2@C, was synthesized for the determination of five phthalates in food samples. The adsorbent was prepared by assembling hexamethylcyclotrisiloxane (D3) into γ-cyclodextrin (γ-CD) cavities via saturated solution method, followed by hydrothermal oxidation to form SiO2@C, and subsequent C18 modification on the inner SiO2 core. The outer hydrophilic amorphous carbon shell enables effective extraction, while the inner C18 layer provides hydrophobic interactions. Using tip-based solid-phase microextraction (SPME), the adsorbent (10 mg) efficiently enriched phthalates from water, milk, and cola. Under optimized conditions (pH, eluent type/volume, sample volume, salt concentration), the method coupled with GC/MS exhibited linearity in the range of 0.5–10 ng·mL−1 (R² > 0.99), limits of detection (S/N ≥ 3) of 0.04–0.15 μg·L−1, and spiked recoveries of 74%–100% (RSD 1.32%–3.49%). For real samples, recoveries were 84.6%–102.3% for tap water, 80.7%–104.6% for cola, and 80.2%–101.4% for milk. The method offers simplicity, rapidity, low sample consumption, high enrichment efficiency, and strong matrix interference resistance, demonstrating significant potential for trace phthalate monitoring in foods.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030404
The photoelectrocatalytic degradation of seven sulfonamide antibiotics—sulfathiazole (STZ), sulfadiazine (SDZ), sulfisoxazole (SIA), sulfamethoxazole (SMZ), sulfapyridine (SPD), sulfadimidine (SMT), and sulfaguanidine (SG)—was investigated using a bismuth vanadate-loaded titanium dioxide array (BiVO4/TiO2) as the anode under visible light irradiation. Systematic evaluation of BiVO4 loading, solution pH, current density, electrolyte type, and electrolyte concentration revealed optimal conditions of 50 mmol·L−1 Na2SO4, a current density of 1.67 mA·cm−2, and pH 2. Under these conditions, STZ removal and total organic carbon (TOC) removal reached 95.7% and 76.7%, respectively. Removal efficiencies for SDZ, SIA, SMZ, SPD, SMT, and SG were 94.9%, 80.9%, 79.1%, 57.7%, 52.3%, and 52.0%, with TOC removal ranging from 50% to 76.7%. Quenching experiments and electron paramagnetic resonance (EPR) identified hydroxyl radicals (·OH), singlet oxygen (1O2), and sulfate radicals (SO4−·) as dominant reactive species. The BiVO4/TiO2 composite exhibited a valence band edge at EVB = 2.775 V vs. RHE, enabling oxidation of H2O, OH−, and SO4^2− to generate these radicals. The heterostructure narrowed the bandgap to 2.12 eV and enhanced visible light response, facilitating efficient charge separation and transfer. Degradation pathways involved oxidation of aniline moieties to nitro groups, followed by hydroxylation and cleavage of S–N, N–C, or S–C bonds, ultimately mineralizing to CO2, H2O, SO4^2−, and NO3−. The system demonstrated high stability and catalytic efficiency across acidic and alkaline conditions, offering a promising approach for antibiotic removal from environmental waters.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60653-6
Carbon deposition caused by mass transfer limitations is a key challenge for traditional microporous ZSM-5 zeolites in coal tar catalytic cracking. To address this, benzene was used as a model compound. Parent ZSM-5 (NL-ZSM-5) was modified with tetraethylammonium hydroxide (TEAOH) to prepare hierarchical ZSM-5 zeolites with different mesopore sizes. Characterization (XRD, FT-IR, BET, TEM) confirmed successful mesopore introduction via selective desilication while retaining the MFI structure. At TEAOH concentration of 0.4 mol/L (ZSM-5-C), total pore volume increased from 0.24 to 0.43 cm3/g, and Brønsted acid amount increased from 0.28 to 0.67 mmol/g, with improved acid site accessibility. Catalytic experiments and carbon deposition analysis showed that hierarchical pore structure inhibits coking via a synergistic effect of diffusion enhancement and adsorption-site regulation. The coke amount of ZSM-5-C was 4.0%, only one-third of that of NL-ZSM-5 (11.9%). Molecular dynamics simulations confirmed that the diffusion coefficient of benzene in a 3.0 nm mesopore model is an order of magnitude higher than in a 2.0 nm model. Adsorption capacity decreases with increasing mesopore size, shortening residence time. Increasing temperature enhances diffusion but exponentially intensifies surface condensation reactions (Arrhenius effect), which dominates coke formation; hierarchical pores mitigate this negative effect. This research provides a theoretical basis for designing high-efficiency, coke-resistant catalysts for coal tar conversion.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041904
Non-fentanyl opioids, a subclass of new synthetic opioids (NSOs), have emerged as the fastest-growing category of new psychoactive substances (NPS) globally, driven by regulatory tightening on fentanyl analogs. Their structural diversity, rapid in vivo metabolism, and multiple metabolic pathways complicate detection in biological matrices, posing significant challenges for forensic toxicology and environmental monitoring. Liquid chromatography-mass spectrometry (LC-MS) remains the gold standard for trace-level quantification due to its high sensitivity, specificity, and accuracy. This review systematically examines the classification, toxicological profiles, and metabolic routes of non-fentanyl opioids, including AH-7921, MT-45, U-47700, brorphine, and nitazenes. It critically evaluates sample preparation techniques—solid-phase extraction (SPE), liquid-liquid extraction (LLE), and protein precipitation (PPT)—highlighting their efficiency, recovery rates, and matrix effects. Furthermore, it synthesizes recent advances in LC-MS methodologies, including high-resolution mass spectrometry (HRMS) and tandem mass spectrometry (MS/MS), with emphasis on multiplex detection capabilities, limits of detection (LODs) reaching sub-ng/mL levels, and validation parameters. The review underscores the necessity for continuous analytical innovation to keep pace with emerging NSOs and provides a technical framework for accurate identification in forensic and environmental contexts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042101
Chloropyridine compounds, widely used as pesticide intermediates in China, pose significant risks to aquatic ecosystems and human health due to their high toxicity, persistence, and frequent detection in water bodies. This study addresses the removal of 3,4,5,6-tetrachloropyridine-2-carboxylic acid (TCPA), a representative chloropyridine contaminant, using a novel composite material. Biochar-supported zero-valent iron/iron carbide composites (SL-FeC2O4-800 °C) were synthesized via a high-temperature carbothermal process, employing activated sludge as the carbon source and ferrous oxalate (FeC2O4) as the iron precursor. The composite exhibited rapid and efficient TCPA degradation across a wide pH range (3–9), achieving 98% removal within 2 minutes. Mechanistic studies using scavenging experiments revealed that TCPA removal proceeds through synergistic pathways: adsorption onto biochar, direct reduction by zero-valent iron, and oxidation by reactive oxygen species (ROS) generated via oxygen activation. Surface-bound iron species were identified as critical for ROS formation. The material demonstrated reusability over five cycles, with degradation efficiencies decreasing from 98.54% to 40.36%, indicating gradual deactivation due to iron consumption and surface passivation. This work not only provides an efficient and environmentally sustainable method for removing persistent and highly toxic pollutants like TCPA but also offers a novel strategy for sludge resource utilization. The low-cost raw materials, simple preparation, and high activity position this composite as a promising candidate for industrial wastewater treatment, particularly in pesticide manufacturing effluents.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608023
Zinc-containing steel dust sludge, a by-product of steelmaking, contains high levels of chlorine (Cl) along with valuable metals such as Fe, Zn, K, and Na. When recycled into the steel production process, Cl accumulates, causing sintering instability and severe corrosion of blast furnace linings. This study investigated water leaching for Cl removal from zinc-containing steel dust sludge. Under optimal conditions (liquid-to-solid ratio 5 mL/g, temperature 70 °C, time 60 min, rotation speed 160 r/min), the Cl leaching rate reached 87%. Furthermore, a three-stage countercurrent water washing process at a liquid-to-solid ratio of 6 mL/g and room temperature for 45 min achieved a Cl leaching rate exceeding 90%. The water washing also reduced the leaching toxicity of metals in the sludge to a certain extent. Characterization via XRD, SEM, FT-IR, and XPS revealed that water washing primarily dissolved soluble chlorides (NaCl, KCl, etc.), increasing the specific surface area from 2.71 to 10.11 m²/g and average pore size from 12.83 to 16.29 nm. These findings provide theoretical and technical support for efficient Cl removal from zinc-containing steel dust sludge, facilitating its safe resource utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4008-2
Lung cancer, particularly non-small cell lung cancer (NSCLC), remains a leading cause of cancer-related mortality, with conventional therapies hampered by poor tumor specificity, low drug accumulation, and suboptimal efficacy. To address these challenges, we rationally designed a tumor-targeted, ferrocene-bearing, covalently immobilizable theranostic probe, dIR-CDF, for near-infrared (NIR) imaging-guided photodynamic-ferroptosis synergistic therapy. The probe exploits the overexpression of sulfenated proteins in the tumor microenvironment to specifically target integrin αvβ3-positive NSCLC cells and undergo covalent anchoring via the reaction between 1,3-cyclohexanedione and sulfenic acid, thereby enhancing tumor accumulation and retention. Under 808 nm irradiation, dIR-CDF generates singlet oxygen (1O2) for photodynamic therapy (PDT), while the sustained release of ferrocene catalyzes Fenton reactions to produce hydroxyl radicals (·OH), inducing ferroptosis. The synergistic action of PDT and ferroptosis amplifies lipid peroxidation and disrupts antioxidant defenses, leading to efficient suppression of NSCLC tumors in living mice. This work presents a universal and powerful theranostic platform for precise cancer diagnosis and treatment, with the covalent targeting strategy offering enhanced specificity and retention.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4098-8
Fluorescence image-guided photodynamic therapy (PDT) enables real-time monitoring of photosensitizer biodistribution and metabolism for optimized treatment timing. However, its application remains limited by reliance on high-end imaging systems. To address this, we designed three novel small-molecule photosensitizers (TTNb, TTAn, TTPh) based on a 2-vinylbenzoic acid scaffold, functionalized at the 5-position with nitro, amino, or hydrogen groups. Replacing the nitro group with amino or hydrogen switched aggregation behavior from aggregation-induced emission (AIE) to aggregation-caused quenching (ACQ), accompanied by a red-to-green fluorescence shift and subcellular relocation from liposomes to lysosomes. These findings establish design principles for ratiometric nitroreductase probes and enable systematic comparison between AIE and ACQ photosensitizers. Among these, TTAn exhibited superior cellular uptake (2800 times higher than Ce6 in Eca-109 cells), specific lysosomal targeting, balanced reactive oxygen species (singlet oxygen/superoxide anion) generation, and intense fluorescence. Under white light irradiation, TTAn achieved an IC50 of 21 nM, surpassing Ce6 by 50-fold. Notably, TTAn produced strong fluorescence in mice tumors under both one- and two-photon excitation, detectable using conventional imaging tools (smartphones, DSLR cameras) or even visible to the naked eye, confirming outstanding tumor specificity. Leveraging these advantages, TTAn enabled successful image-guided two-photon PDT in Eca-109 tumor-bearing mice with a single treatment, demonstrating potent therapeutic efficacy and biosafety. This work provides a strategic blueprint for developing small-molecule theranostic agents that operate without complex fluorescence imaging systems.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3631-1
Anion exchange membrane water electrolysis (AEMWE) offers cost and dynamic-response advantages over proton exchange membrane systems, yet commercial deployment is constrained by the alkaline stability of anion exchange membranes (AEMs) and the sluggish kinetics of non-precious metal catalysts. This work reports a series of poly(terphenyl-diphenylmethane piperidinium) (QPDPMTP) membranes synthesized with varied diphenylmethane (DPM) content. The alkyl chain of DPM induces pronounced microphase separation and elevates free volume fraction, yielding an OH− conductivity of 152 mS cm−1 at 80 °C for QPDPMTP-10. After 1032 h immersion in 6 M NaOH at 80 °C, the membrane retains 90.7% of its initial conductivity. An AEMWE cell integrating QPDPMTP-10 with a non-precious NiFeCo LDH/NiS/NF anode achieves 3.11 A cm−2 at 2 V in 1 M KOH at 80 °C and sustains 1 A cm−2 for 1800 h under gradient KOH concentration. These results establish a viable pathway for durable, low-cost AEMWE systems.