SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61072-4
Sodium-ion capacitors (SICs) typically feature a hybrid design, incorporating a battery-type anode that operates by faradaic redox reactions and an activated carbon cathode that functions through electrical double-layer (EDL) adsorption/desorption. However, the kinetics of faradaic processes are inherently slower than those of EDL processes, leading to a fundamental problem known as kinetic imbalance between the electrodes, which hinders the development of high-performance SICs. To address this, we synthesized composites of bismuth nanoparticles in N-doped carbon (Bi@NC) by a high-temperature sintering method. The resulting Bi@NC anode has a specific capacity of 300 mAh g−1 at 0.5 A g−1, an exceptional rate capability (maintaining performance at currents exceeding 75 A g−1), and outstanding cycling stability over 12,000 cycles. Three-electrode Swagelok cell tests revealed that this high-rate Bi@NC composite effectively decreases the kinetic gap with the activated carbon cathode, as shown by an analysis of their respective potential swing windows (vs. Na/Na+). This enables the fabricated SIC to achieve a maximum energy density of 115 Wh kg−1, a peak power density of 45,535 W kg−1, and a long cycle life exceeding 8,000 cycles.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508013
The Sanshenggong section of the Yellow River is a critical hydrological monitoring and control point, whose water quality directly affects the ecological safety and sustainable water resource utilization of the middle and lower reaches. This study analyzed water quality monitoring data from 2011 to 2024 using the Mann-Kendall test to identify abrupt change years, combined with single-factor evaluation and a fuzzy comprehensive evaluation method improved by CRITIC-entropy weight combination to systematically assess water quality evolution. The Mann-Kendall test identified 2013 and 2019 as abrupt change points, with non-significant improvement from 2013 to 2015 and significant improvement after 2016. Single-factor evaluation indicated that total phosphorus (TP) was the primary exceeding factor in 2011–2012, and its declining concentration drove the water quality upgrade from Class III to Class II in 2013. The CRITIC-entropy weight combination assigned the highest weight (28.96%) to permanganate index, whose decline was the core driver of water quality improvement. The improved fuzzy evaluation showed that the membership degree of Class III water dropped to zero in 2013, indicating stable improvement, but periodic rebounds in Class II membership suggested potential degradation risks. This study provides scientific evidence for ecological protection and high-quality development of the Yellow River Basin.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4105-8
Chiral europium(III) (Eu(III)) complexes, characterized by their f-f transitions and allowed magnetic dipole transitions, exhibit narrowband emission and superior circularly polarized luminescence (CPL) with high luminescence dissymmetry factors (g_lum), making them promising for circularly polarized organic light-emitting diodes (CP-OLEDs) and 3D displays. Here, we report a pair of R/S-Eu(TTA)3DFPO enantiomers, employing β-diketone 1,1,1-trifluoro-3-(2-thenoyl)acetone (TTA) as the main ligand and point-chiral R/S-tert-butyl(6-(diphenylphosphoryl)dibenzo[b,d]furan-4-yl)(phenyl)phosphine-oxide (R/S-DFPO) as ancillary ligands. In toluene, these enantiomers display characteristic narrowband red emission from the 5D0→7F2 transition of Eu(III), with a maximum emission wavelength of 617 nm, a full width at half maximum of 11 nm, a photoluminescence quantum yield of 43%, and pronounced chiroptical response, evidenced by |g_PL| values of 8.0 × 10^-3 around 590 nm (5D0→7F1 transition). Notably, CP-OLEDs fabricated via vacuum deposition achieve a maximum external quantum efficiency of 4.0% and exhibit obvious circularly polarized electroluminescence with |g_EL| values exceeding 1.0 × 10^-2. These results demonstrate that point-chiral phosphine-oxide ligands provide an effective strategy for achieving coordination-stable chiral Eu(III) complexes for high-performance CP-OLEDs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022704
Secondary inorganic aerosols (SNA), comprising sulfate, nitrate, and ammonium, are critical contributors to PM2.5 pollution in the Fenwei Plain, yet their formation mechanisms remain poorly characterized. Wintertime observations in Taiyuan revealed SNA as the dominant PM2.5 component, with a mean mass concentration of 33.19 ± 18.72 μg m−3, accounting for 47.13% of total PM2.5 mass. SNA concentrations increased markedly with pollution severity, but even under relatively clean conditions, SNA maintained a high mass fraction. Diurnal variation and correlation analyses indicated that nitrate formation pathways differed between day and night, largely governed by relative humidity (RH). During daytime, high RH (>55%) facilitated the partitioning of gaseous HNO3 to particulate nitrate. At night, RH positively correlated with nitrate concentration and nitrogen oxidation rate (NOR), with increased aerosol liquid water content (AWC) promoting NO2-to-nitrate conversion. The PM2.5 pH ranged from 4.3 to 5.2, and sulfate formation was primarily driven by H2O2 oxidation, with NO2 oxidation as a secondary pathway. These findings enhance understanding of SNA formation in the Fenwei Plain and provide a scientific basis for air quality policy.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607010
The impact of low concentrations of perfluorooctane sulfonate (PFOS) on anaerobic fermentation of waste activated sludge (WAS) remains poorly understood. This study applied three PFOS levels (0.5, 1.0, and 4.5 μg/g TSS) to systematically evaluate effects on organic matter solubilization and nitrogen/phosphorus transformations. Monitoring of soluble chemical oxygen demand (SCOD), soluble protein, polysaccharides, NH4+-N, PO43--P, and three-dimensional excitation-emission matrix (3D-EEM) fluorescence revealed that PFOS significantly enhanced release of SCOD, protein, and polysaccharides. At 45 °C after 14 days with 4.5 μg/g TSS, SCOD peaked approximately 28% higher than control, indicating increased biodegradable organic matter accumulation. NH4+-N concentrations rose overall with fluctuations, while PO43--P release was inhibited, suggesting interference with nutrient transformation pathways. 3D-EEM analysis showed strengthened signals of aromatic proteins and microbial by-products, confirming matrix solubilization. These findings demonstrate a dual effect of low-level PFOS: initial promotion of organic matter release followed by potential inhibition of nutrient transformation. This study provides data support for understanding PFOS environmental behavior in anaerobic digestion and informs sludge resource utilization and risk assessment of emerging contaminants.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3964-5
The escalating demand for personalized thermal-moisture comfort, coupled with the high energy consumption of conventional heating and cooling systems and the imperative for low-carbon energy conservation, has driven the development of shape memory smart fabrics that respond to environmental changes. However, existing shape memory thermal-moisture management fabrics suffer from excessively high response temperatures, inadequate response performance, and suboptimal thermal-moisture management. In this work, a dual-network shape memory polymer (SMP) was synthesized, and its shape memory transition temperature was tuned to align with the human thermal comfort range. The polymer was processed into fibers and subsequently into twisted-coiled artificial muscles to enhance reversible strain. Woven with wool into a plain fabric, the resulting textile exhibits adaptive thermal-moisture management, achieving a warp reversible strain of up to 17.5%. At elevated temperatures, the fabric contracts, exhibiting an air permeability of 1546 mm/s and thermal conductivity of 0.0518 W/(m·K); at lower temperatures, it elongates, with air permeability of 1322 mm/s and thermal conductivity of 0.0426 W/(m·K), thereby realizing 'warm when cool and cool when hot' functionality. Compared with commercial wool fabrics, this smart fabric lowers the skin microenvironment temperature by 1.5 °C and offers an energy savings potential of approximately 222.58 MJ/m² per year in capital cities such as Beijing. This work provides a novel technical pathway and design approach for future personalized comfort and low-carbon, energy-saving textiles.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025042304
To characterize the spatial variability of PM2.5 chemical components at the urban scale, ambient PM2.5 samples were collected from eight sites across Changsha, China. Samples were analyzed using ion chromatography, elemental carbon/organic carbon (EC/OC) analysis, and X-ray fluorescence (XRF) spectroscopy. Results showed that PM2.5 concentrations in urban areas were significantly higher than in suburban locations, with notably elevated levels at Changsha New Railway Station and Mapoling. Across different PM2.5 pollution levels, the eight sites exhibited pronounced spatial differences in concentration while sharing similar chemical compositions. Source apportionment identified secondary nitrate, vehicle emissions, and secondary sulfate as major contributors to PM2.5. The spatial distribution of these sources varied distinctly: secondary nitrate showed lower contributions in central areas but higher in western and southeastern regions; secondary sulfate was more prominent in the southeast, while vehicle emissions contributed more in the southeast and less in the west. Additionally, aerosol liquid water content promoted the secondary formation of nitrate and sulfate, exacerbating PM2.5 pollution. Secondary organic carbon was elevated in areas with high pedestrian density, suggesting enhanced secondary organic aerosol formation under intensive human activity. The study provides insights for targeted pollution control strategies in Changsha and similar cities.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60671-8
The conversion of CO2 into gasoline-range hydrocarbons represents a sustainable pathway to achieve deep decarbonization in the transportation sector. Nevertheless, the traditional Fischer-Tropsch synthesis (FTS) suffers from a broad product distribution, which restricts the achievable selectivity toward C5−C11 gasoline-range hydrocarbons to roughly 45%. This study presents the development of a bifunctional catalyst that integrates In2O3/ZrO2 metal oxides with SAPO-11 molecular sieves, aiming at efficiently converting CO2/CO mixtures into C5−C11 gasoline hydrocarbons. Catalysts with varying In/Zr ratios were prepared via co-precipitation. By employing a COx (CO/CO2) co-feeding strategy (CO/COx = 0.5), the formation of by-product CO was significantly suppressed, thereby enabling the selectivity for gasoline hydrocarbons to exceed the maximum predicted by the Anderson-Schulz-Flory (ASF) model. Notably, under identical reaction conditions, the In2Zr1Ox/SAPO-11 catalyst exhibited higher performance compared with In2O3/SAPO-11 and ZrO2/SAPO-11. The COx conversion was elevated by 1.7% and 0.2%, while the selectivity toward C5–C11 hydrocarbons was enhanced by 8.0% and 16.0%, respectively. Furthermore, the In2Zr1Ox/SAPO-11 catalyst delivered a single-pass performance of 24% COx conversion and 68% selectivity for C5−C11 hydrocarbons at 380 °C, 3 MPa and a gas hourly space velocity (GHSV) of 2400 mL/(min·g). Within this product distribution, isoparaffins accounted for 32.6% of the total components, corresponding to an isoparaffin/neoparaffin ratio of 12.3. After 150 h of stability testing, the catalyst maintained a single-pass COx conversion of 23% and a C5−C11 selectivity of ~65%, demonstrating excellent catalytic activity and promising potential for industrial application.