SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4385-1
Self-assembled monolayers (SAMs) are effective hole-selective contacts for inverted perovskite solar cells, but scalable deposition on rough substrates is hindered by molecular aggregation, disordered packing, and incomplete adsorption. We propose a hybrid strategy incorporating 4-(Piperidin-4-yl)butanoic acid hydrochloride (PBACl) into the 4PABCz solution during dip-coating. PBACl suppresses aggregation via hydrogen bonding and ionic interactions, yielding homogeneous coverage and improved wettability. The piperidine and carboxyl groups passivate buried interfacial defects through hydrogen bonding and coordination with perovskites. Small-area cells achieve a champion power conversion efficiency (PCE) of 26.09%, while a 5 cm × 5 cm mini-module (aperture area 14.4 cm²) delivers 23.29% PCE. Encapsulated devices retain 80% of initial PCE after 1350 h maximum power point tracking under continuous illumination. This ion modulation strategy bridges molecular-level interface control with scalable processing, offering a pathway to industrially relevant perovskite photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3785-5
The effective separation and utilization of photo-generated carriers are critical for advancing photocatalysis, particularly in coupled reactions of H2 production and value-added chemical synthesis. Here, a sandwich-structured MnO2@ZnIn2S4@Ti3C2 hollow sphere was designed, with MnO2 and Ti3C2 loaded on the inner and outer surfaces of ZnIn2S4, respectively. MnO2 acts as an oxidation cocatalyst collecting photo-generated holes, while Ti3C2 serves as a reduction cocatalyst for electrons, promoting spatial separation of carriers and enabling spatially separated redox reactions. The hollow structure enhances light harvesting. The optimal catalyst achieves photocatalytic H2 production rate of 6.29 mmol g−1 h−1 and benzaldehyde production rate of 5.26 mmol g−1 h−1 from benzyl alcohol oxidation, significantly outperforming ZnIn2S4, MnO2@ZnIn2S4, and ZnIn2S4@Ti3C2. In situ irradiated X-ray photoelectron spectroscopy confirms effective carrier separation. In situ electron paramagnetic resonance and diffuse reflectance infrared Fourier transform spectroscopy reveal reaction intermediates. This work provides a strategy for designing efficient photocatalysts for coupled H2 production and selective oxidation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3833-1
Developing plasmonic nanomaterials with compositions beyond noble metals is crucial for expanding their applications. Transition metal nitrides, such as titanium nitride (TiN), exhibit excellent plasmonic optical properties and photothermal conversion efficiency, showing promise in catalysis, photothermal therapy, and seawater desalination. However, the structure-property relationship governing their plasmonic optical properties remains unclear. Here, we constructed Au@TiN core-shell nanostructures and systematically investigated the tunability of their geometry, composition, and optical properties. By varying the Au core size and TiN shell thickness, we achieved precise control over the localized surface plasmon resonance (LSPR) from visible to near-infrared wavelengths. Single-particle scattering spectroscopy revealed distinct plasmon hybridization modes, with experimental spectra matching theoretical simulations. The Au@TiN nanostructures exhibited enhanced photothermal conversion efficiency (η = 78.5%) under 808 nm laser irradiation, significantly outperforming pure TiN nanoparticles (η = 45.2%). This work demonstrates multi-factor control over plasmonic effects in TiN, providing insights for designing TiN-based plasmonic nanomaterials for catalysis and sensing.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3851-3
Aqueous zinc-ion batteries (AZIBs) face critical challenges from zinc anode instability, including corrosion, hydrogen evolution reaction (HER), parasitic byproduct formation, and uncontrolled dendrite growth. To address these issues, we developed a multifunctional cerium-based metal-organic framework (Ce-MOF) coating for zinc anodes. The coating features an ordered porous structure and inherent properties that mitigate HER, suppress side reactions, and inhibit dendrite formation. Symmetric cells using Ce-MOF/Zn demonstrated exceptional cycling stability for over 2060 h at 0.5 mA cm−2 with a low hysteresis polarization of 26 mV. In full cells with an I2@AC cathode, the Ce-MOF/Zn||I2@AC achieved outstanding cycling stability of 28,550 cycles at 5 A g−1, with 91% capacity retention (109.6 mAh g−1). Through integrated characterization employing in-situ optical microscopy, ex-situ XRD, SEM, and DFT calculations, we elucidated the multifunctional mechanism: the Ce-MOF coating facilitates preferential (002)-oriented Zn deposition to suppress dendrites, reduces Zn2+ desolvation energy to enhance deposition kinetics, and modulates interfacial chemistry to mitigate HER and corrosion. This work establishes Ce-MOF coatings as a simple yet powerful strategy for developing high-performance zinc anodes, providing critical insights for advancing practical AZIB technologies.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607017
Distillers' grains, the largest organic solid waste stream in the brewing industry, require efficient low-carbon valorization to support China's Dual Carbon Goals. This study employs life cycle assessment (LCA) to quantify CO2 emissions and carbon reduction benefits of two mainstream routes: pyrolysis to biochar and fermentation to organic fertilizer. Based on public process data, the total life-cycle CO2 emission for biochar production from 1 t of distillers' grains is 250.02 kg, with a carbon sequestration reduction of 120.29 kg, demonstrating superior long-term carbon fixation. In contrast, organic fertilizer production emits 536.14 kg CO2 per ton, achieving a carbon reduction of only 86.22 kg, indicating inferior mitigation performance. Techno-economic analysis reveals net profits of 471.97 CNY/t for biochar and 822.27 CNY/t for organic fertilizer, showing that the organic fertilizer route offers higher profitability. Both pathways effectively reduce CO2 emissions, with biochar prioritizing environmental sustainability and organic fertilizer excelling economically. This study provides data-driven insights for selecting organic solid waste recycling strategies, promoting low-carbon technologies, and establishing circular economy models in the brewing industry.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4031-6
Organic fluorophores operating in the second near-infrared (NIR-II, 1000–1700 nm) window are highly attractive for cancer phototheranostics. Yet, the advancement of aza-BODIPY-based NIR-II dyes remains challenging due to their limited spectral tunability and diminished fluorescence quantum yields (FLQY) under physiological conditions. Herein, we propose a rational donor-acceptor (D-A) molecular engineering strategy to construct an aza-BODIPY fluorophore, TPACN, featuring intramolecular charge transfer (ICT)-enhanced NIR-II emission and balanced photothermal performance. By introducing electron-rich triphenylamine (TPA) donors and peripheral cyano (–CN) acceptors, the optimized D-A coupling significantly strengthened the ICT effect, leading to broadened NIR absorption, a markedly red-shifted fluorescence peak at 1086 nm, and an exceptional fluorescence quantum yield of 1.55% in dichloromethane (DCM). When encapsulated in F127, TPACN nanoparticles (TPACN NPs) maintained a high aqueous FLQY of 0.20%, accompanied by a notable photothermal conversion efficiency (PCE) of 39% under 808 nm irradiation. The sterically twisted TPA units effectively alleviated aggregation-caused quenching (ACQ) and fine-tuned the excited-state energy dissipation pathways, realizing a synergistic balance between radiative (fluorescence) and non-radiative (heat) relaxation. Benefiting from these optimized photophysical properties, TPACN NPs achieved high-resolution NIR-I photoacoustic and NIR-II fluorescence dual-modal imaging, enabling accurate tumor visualization and efficient photothermal ablation in vivo. This work introduces a general design paradigm that exploits ICT modulation and steric engineering to overcome the intrinsic fluorescence bottleneck of aza-BODIPY systems, offering new molecular insights for the advancement of high-performance NIR-II dyes for precision phototheranostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.