SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4263-3
Monolayer black phosphorus (phosphorene) exhibits a direct bandgap and strong in-plane anisotropy, making it a promising candidate for near-infrared (NIR) optoelectronic devices. However, the precise modulation of its excitonic emission via anisotropic strain remains insufficiently understood, particularly regarding the contrasting strain responses of phosphorene versus transition metal dichalcogenides (TMDs). Here, we combine experimental characterization with tight-binding (TB) modeling to elucidate the strain-dependent bandgap evolution in phosphorene. Using a four-band TB model, we derive the bandgap at the Γ point as E_g^BP = 4t1 + 2t2 + 4t3 + 2t5, with hopping parameters t1 = -1.220 eV, t2 = 3.665 eV, t3 = -0.205 eV, t4 = -0.105 eV, and t5 = -0.055 eV. Under tensile strain along the zigzag (ZZ) direction, the interatomic distance associated with t1 increases, reducing the magnitude of |t1|. Since t1 is negative, the bandgap increases, contrary to the behavior of monolayer MoS2, where tensile strain decreases the bandgap due to positive hopping parameters t11, t22, and t12. This anisotropic strain response enables selective tuning of NIR exciton emission. Our findings provide a quantitative framework for strain engineering in phosphorene-based NIR devices, highlighting the critical role of hopping parameter signs in determining bandgap modulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3685-7
NiMo-based catalysts are promising for the hydrogen evolution reaction (HER), yet optimizing their electronic structure and enhancing mass transfer remain challenging. Here, we report a route to synthesize two-dimensional (2D) porous Mo2N-Ni heterojunction nanosheets with tuned Ni/Mo ratio for enhanced alkaline HER. The precursor is assembled from polyoxometalate clusters (PMo12) and layered Ni(OH)2. The interaction between PMo12 and Ni(OH)2 suppresses particle agglomeration during pyrolysis, yielding 2D porous sheets composed of small Mo2N-Ni units. Electron transfer from Ni to Mo2N redistributes electrons at the heterojunction, optimizing intermediate adsorption/desorption. The porous structure enhances mass transfer, reducing catalyst impedance. The optimized catalyst exhibits an overpotential of 19 mV at 10 mA cm−2, comparable to commercial Pt/C. An anion exchange membrane (AEM) electrolyzer pairing this catalyst with NiFe-LDH achieves 500 mA cm−2 at 1.80 V and operates stably for 300 h. This assembly method offers a scalable strategy for efficient catalyst production.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507059
Anaerobic digestion sludge (ADS) contains recalcitrant organic matter and exhibits poor dewaterability, posing challenges for disposal. This study evaluated the immobilization of white rot fungi (WRF) on four carriers—polyvinyl alcohol, cotton thread, wood chips, and sodium alginate—for ADS treatment. Cotton thread immobilization yielded the earliest and most sustained enzyme activity, highest biomass retention, and minimal biomass loss. WRF treatment achieved a 10.09% removal of total chemical oxygen demand (TCOD) and significantly disrupted extracellular polymeric substances (EPS), selectively degrading soluble EPS. To maintain fungal activity, periodic carrier replacement was required. Compared to the control, the experimental group showed an 8.9 mg·L−1 reduction in total protein and polysaccharide content in soluble EPS, a 27.33% decrease in capillary suction time (CST), and improved sludge dewaterability. These results demonstrate the potential of WRF for ADS treatment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025121001
Ion chromatography (IC) is the core analytical method for qualitative and quantitative determination of anions in complex water environments, and its separation efficiency highly depends on the performance of the stationary phase. This review systematically summarizes recent progress in the preparation and functionalization of IC stationary phases, addressing the urgent need for high selectivity and sensitivity in water anion analysis. The characteristics of organic polymer-based and inorganic-based matrices are compared, highlighting the advantages of polymer matrices such as poly(methacrylate), poly(vinyl alcohol), polystyrene-divinylbenzene (PS-DVB), and ethylvinylbenzene-divinylbenzene (EVB-DVB) in terms of wide pH tolerance (e.g., pH 0–14 for PS-DVB) and organic solvent compatibility, which allow the use of strong acid or base eluents. Various functionalization strategies are discussed, including the introduction of quaternary ammonium groups, hydrophilic modifications, and grafting of functional layers, which enhance separation selectivity and detection capability. The review also covers the development of hybrid stationary phases and the application of IC in monitoring trace pollutants in water, such as bromate, chlorite, chlorate, fluoride, and nitrate, as regulated by Chinese standards (GB 5749—2022). Future trends are projected, focusing on novel materials for precise identification and high-throughput monitoring. The paper provides a comprehensive reference for the design of high-performance stationary phases, emphasizing the importance of matrix selection and surface chemistry in achieving robust and sensitive anion analysis.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61093-1
Advanced catalyst structures with good active site accessibility and strong metal-support interactions are crucial for oxygen reduction reaction (ORR) catalysis. A hierarchically porous Pt catalyst supported on honeycomb-like nitrogen-doped carbon (Pt/HNC-400, where 400 denotes the optimal dosage (mg) of the sacrificial SiO2 hard template used during synthesis) was fabricated by combining template-assisted pyrolysis and alcohol reduction. The fabrication involves the template-assisted pyrolysis of ZIF-67 (which provides the N-dopant through its 2-methylimidazole ligand) followed by HF etching to completely remove the SiO2, yielding a 3D interconnected porous carbon support. Compared to a commercial Pt/C, it had an exceptional ORR performance with a half-wave potential of 0.901 V (41 mV higher), a mass activity at 0.9 V that was 15.3 times higher, and significantly improved durability (a half-wave potential decay of 25 mV vs. 80 mV after 10,000 accelerated durability tests (ADTs)). Mechanistic investigations showed that this superior performance is due to the combined effects of the 3D porous structure, ultrafine Pt nanoparticles with strong metal-support interactions, and in-situ formed Co-Nx moieties from the pyrolysis of precursor ZIF-67. After 10,000 ADTs it was shown to have excellent structural integrity, retaining 87.4% of its initial electrochemically active surface area (102.7 m2 g−1). This study may assist the development of new high-performance ORR catalysts.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508084
Granite mining areas generate large quantities of abandoned soil and rock powder, posing environmental challenges and resource waste. This study investigates the synergistic preparation of porous ceramsite from two typical granite solid wastes—weathered granite soil (high Al2O3) and granite waste rock powder (high SiO2)—with waste glass powder as a fluxing agent. Single-factor experiments and response surface methodology (Box-Behnken) were employed to optimize the process and elucidate the pore-forming mechanism. The optimal conditions were a mass ratio of weathered granite soil:granite waste rock powder:waste glass powder of 5.6:2.4:2, a preheating temperature of 480 °C, a sintering time of 32 min, and a sintering temperature of 1140 °C. Under these conditions, the resulting porous ceramsite achieved a compressive strength of 1.74 MPa. The ceramsite effectively immobilized heavy metals, ensuring environmental safety. This research demonstrates that multi-component complementarity and multi-factor coupling optimization can produce porous ceramsite with favorable mechanical properties and stable pore structure, providing a theoretical basis and technical support for high-value utilization of granite solid waste.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3899-9
Metal halide hybrids have emerged as a highly promising class of optoelectronic materials owing to their rich chemical and electronic diversity, high luminescence efficiency, and tunable photophysical properties. Incorporating chirality into these systems imparts pronounced circularly polarized luminescence (CPL) activity, creating new opportunities for advanced smart optoelectronic and spintronic applications. Although numerous reviews have been dedicated to CPL-active perovskites, their non-perovskite ionic counterparts have yet to be systematically and comprehensively reviewed. Given the rapid advancements in this burgeoning field, such a work is both timely and crucial to chart its future course. This review summarizes recent progress in non-perovskite ionic metal halide hybrids exhibiting CPL emission, highlighting four aspects: (1) the intrinsic correlations among different characterization techniques; (2) the strategic advantages of these materials for CPL applications; (3) methodologies for enhancing their CPL performance; (4) the prerequisites and mechanisms underlying CPL generation in achiral metal halide hybrids. Finally, we discuss their emerging applications in light-emitting devices, information encryption, anti-counterfeiting technologies, and scintillators, and provide perspectives on the remaining challenges and future directions in this rapidly evolving field.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3931-6
Detection of circularly polarized light (CPL) is crucial for advancing next-generation chiral optoelectronic applications, where a large photocurrent dissymmetry factor (g_Iph) is essential for accurate polarization discrimination. Chiral hybrid perovskites (CHPs) have emerged as promising CPL-active materials owing to their intrinsic spin-orbit coupling and chiroptical properties. However, an intrinsic conflict between g_Iph and photocurrent response remains a major bottleneck in current CHP-based devices. Low-dimensional CHPs typically suffer from limited carrier mobility, while multilayered structures improve carrier transport but generally reduce the chiral component, thereby reducing chiroptical activity and g_Iph. Herein, we report a Cs-based multilayered chiral-polar perovskite, (R-β-MPA)PACsPb2Br7 (1R, MPA=methylphenethylammonium, PA=propylammonium). The distinctive chiral-polar photovoltaic effect in 1R benefits spin-selective carrier separation and collection, and the resulting device achieves self-powered CPL detection with a high g_Iph of 0.5 and maintains excellent polarization selectivity even at ultralow light intensities of 62 nW cm−2. Meanwhile, the multilayered framework enables high responsivity of 71 mA W−1 and detectivity of 6×10^12 Jones (1 Jones = 1 cm Hz^(1/2) W−1) even at zero bias. This work provides a rational design strategy to achieve chiral optoelectronic materials with a high dissymmetry factor and photocurrent response.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012501
Childhood hypertension is a growing global concern, with approximately 4% of Chinese children exhibiting sustained elevated blood pressure meeting hypertension criteria, and single-time-point screening detecting rates of 14%–20% (up to 19% in obese children). Environmental exposure to metals (lead, cadmium, arsenic, mercury, copper, chromium) and bisphenol analogues (bisphenol A, S, F) has been implicated as a modifiable risk factor. This review synthesizes epidemiological evidence linking such exposures to blood pressure alterations in children and adolescents, highlighting dose-response relationships and potential mechanisms, including oxidative stress, endothelial dysfunction, and epigenetic programming. Key findings from cited studies indicate that low-dose bisphenol A exposure alters human cardiomyocyte functionality, and synergistic effects with insulin resistance elevate childhood blood pressure. Metal exposures, particularly lead and cadmium, are associated with increased blood pressure and cardiovascular structural changes. The review underscores the critical window of developmental exposure and the 'tracking phenomenon' linking childhood blood pressure to adult hypertension. Limitations include cross-sectional designs and confounding by mixed exposures. Future research should employ longitudinal cohorts and multi-pollutant models to refine risk assessment. Preventive strategies should integrate school health programs to reduce environmental exposure and monitor cardiovascular health.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4079-4
Utilization of ultrahigh-nickel LiNi_xCo_yMn_1-x-yO_2 (NCM) (x > 0.97) in Li-ion batteries can distinctively boost energy density through enhanced discharge capacity. However, capacity and thermal stability deteriorate as Ni content approaches the limit. Here, we propose a facile strategy by introducing high-valence tungsten (W) into ultrahigh-nickel polycrystalline LiNi_0.98Co_0.01Mn_0.01O_2 (PCNCM98). W-doped PCNCM98 (W-PCNCM98) exhibits refined, compactly stacked primary particles, whereas PCNCM98 shows equiaxial, non-uniform larger particles. The refined microstructure enhances mechanical strength: average particle hardness of W-PCNCM98 is 104 MPa, 1.5 times higher than PCNCM98 (68 MPa). This improved mechanical property suppresses lattice volume changes and relieves microcrack formation from H2–H3 phase transition. Consequently, cycling performance in pouch-type full cells is significantly enhanced, with capacity retention of 73% after 2000 cycles at 1 C and 25 °C, 54% higher than PCNCM98. Enhanced structural stability and strong electron affinity of W6+ also improve thermal stability: exothermic peak for W-PCNCM98 is postponed to 203 °C with heat generation of 1287 J g−1, versus 190 °C and 1528 J g−1 for PCNCM98. This high-valent doping strategy stabilizes ultrahigh-nickel NCM cathodes, accelerating large-scale EV applications.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026030601
Bisphenol A (BPA), a high-volume industrial chemical, is implicated in neurotoxicity and chronic neurodegenerative diseases. This study integrates network toxicology, molecular docking, and molecular dynamics simulations to systematically delineate the common mechanisms linking BPA to Alzheimer's disease (AD), Parkinson's disease (PD), and Huntington's disease (HD). Using the human astrocyte cell line SVGP12 as an in vitro model, we identified six key toxic functional proteins—TP53, HSP90AA1, HSP90AB1, INS, BCL2, and AKT1—that mediate BPA's effects across these diseases, with BCL2 emerging as the most central node. Experimental validation demonstrated that BPA induces oxidative stress and cell cycle arrest, suppresses the INS-AKT1-BCL2 anti-apoptotic pathway, and activates the TP53-HSP90 pro-apoptotic pathway, culminating in mitochondrial apoptosis of astrocytes and disruption of neural microenvironment homeostasis. These findings reveal a convergent mechanism by which BPA accelerates neurodegeneration, filling a critical gap in understanding BPA's role in AD, PD, and HD. The study provides a novel theoretical framework and experimental evidence for BPA neurotoxicity risk assessment and informs preventive and therapeutic strategies for BPA-related neurodegenerative disorders.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021203
Neonicotinoid insecticides (NEOs) are widely used pesticides with residues entering the human body via multiple routes, posing potential health risks. Pregnant women are a sensitive population requiring investigation into NEO exposure effects. Based on the Jiashan Birth Cohort, this study measured 12 NEOs (9 parent compounds and 3 metabolites) and three oxidative stress biomarkers (8-iso-prostaglandin F2α, 8-iso-15(R)-prostaglandin F2α, and 8-hydroxy-deoxyguanosine) in urine from 917 pregnant women using liquid chromatography-triple quadrupole mass spectrometry. Demographic data were integrated to analyze exposure patterns and associations. Results showed at least one NEO detected in all samples; seven NEOs had detection rates >50%. Median creatinine-adjusted total concentration was 5.613 μg·g−1. Acetamiprid-N-desmethyl (N-dm-ACE) had the highest detection rate (98.59%) and largest concentration proportion (64.2%). Spearman correlation, multiple linear regression, and Bayesian kernel machine regression revealed positive associations between oxidative stress markers and NEO exposure. Specifically, 8-PGF and 15-PGF correlated positively with thiacloprid-amide (THI-amid) and dinotefuran (DIN); 8-OHdG correlated positively with thiamethoxam (THM) and sulfoxaflor (SFX). Health risk assessment indicated hazard quotients below 1 for all NEOs, suggesting low health risks. This study provides evidence linking NEO exposure to oxidative stress damage in pregnant women, informing risk assessment for sensitive populations.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60684-6
Tungsten trioxide (WO3) is a transition metal oxide of significant interest in heterogeneous catalysis due to its environmental friendliness, cost-effectiveness, and favorable electrical properties. The catalytic performance of WO3 is strongly dependent on its exposed crystal facets, which exhibit distinct physicochemical properties including charge separation efficiency, reactant adsorption capacity, and redox activity. These differences arise from variations in atomic arrangement, electronic structure, and surface energy. This review systematically examines the facet effect of WO3 across photocatalysis, electrocatalysis, photoelectrocatalysis, and thermal catalysis. Theoretical calculations are integrated to elucidate the intrinsic mechanisms underlying facet-dependent behavior from an atomic structure perspective. The paper synthesizes general rules governing the WO3 facet effect across these applications, critically assesses current research limitations, and outlines future directions. Key findings highlight that facet engineering enables precise tuning of catalytic activity and selectivity, with specific facets such as {001}, {110}, and {010} demonstrating enhanced performance in various reactions. The review underscores the importance of morphology control in optimizing WO3-based catalysts and identifies challenges in achieving facet-selective synthesis and stability under operational conditions. Future research should focus on advanced characterization techniques and computational modeling to further unravel facet-dependent mechanisms and guide rational catalyst design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4029-4
Chemical sensing technology is pivotal in modern industry and daily life, with sensor performance critically reliant on nanomaterials. While sensors based on traditional nanomaterials, such as inorganic semiconductors and organic conductive polymers, have achieved commercialization, they face persistent challenges. As an emerging subclass, conductive metal-organic frameworks (c-MOFs) not only inherit the core advantages of traditional MOFs—high specific surface area, porosity, and tunable composition/structure—but also offer adjustable electrical conductivity, rendering them ideal for sensing applications. This review systematically elucidates the construction and properties of c-MOFs across microscopic crystalline and macroscopic micro-nano structural scales. Special emphasis is placed on the structural design and regulation of c-MOFs for analytical sensing, and the intrinsic structure-performance relationship is clarified to achieve higher sensitivity, selectivity, response speed, and long-term stability, as well as other performance metrics. Finally, we comprehensively summarize the typical applications of c-MOFs-based sensors, covering environmental and safety monitoring, photoelectric detection, and health monitoring and diagnosis. At the same time, the key challenges existing in this field, such as the controllable preparation of high-quality single-crystal materials, the theoretical analysis of intrinsic electrically conductive mechanisms, and the balance between macroscopic material stability and the processing performance of devices, were evaluated. The future research directions should focus on developing new ligands and metal combinations to optimize the band structure, deepening the exploration of the mechanisms of emerging physical effects such as piezoelectricity, and promoting the integration and application of materials in practical scenarios such as flexible electronics and wearable devices.