SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4349-9
Sodium metal batteries are promising for large-scale energy storage due to sodium's abundance and low cost, but their commercialization is hindered by dendrite growth and low utilization of sodium metal anodes. Here, we report a yolk-shell structure with gold nanoparticles (Au NPs) confined in hollow carbon nanospheres (Au@HCN) as a robust seeding/hosting interphase. The encapsulation isolates Au NPs from direct electrolyte contact, mitigating parasitic reactions, while the void space accommodates volume changes during alloying. Notably, electrochemical testing reveals that Au NPs undergo alloying-induced amorphization upon sodiation, forming a Na-Au amorphous alloy that enhances sodiophilicity and ensures uniform Na nucleation. This amorphous phase, confirmed by ex situ X-ray absorption spectroscopy and transmission electron microscopy, reduces nucleation overpotential and promotes dendrite-free deposition. The Au@HCN electrode achieves a high Coulombic efficiency of 99.8% over 500 cycles at 1 mA cm−2 and a long cycle life of over 2000 hours at 0.5 mA cm−2 in symmetric cells. Full cells paired with Na3V2(PO4)3 cathodes deliver a specific capacity of 105 mAh g−1 with 92% retention after 500 cycles. This work provides a rational design for stable sodium metal anodes through encapsulation and alloying-induced amorphization, offering a pathway for practical sodium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4192-y
Electrochemical water splitting is pivotal for scalable green hydrogen production, yet its practical deployment hinges on cost-effective electrocatalysts with high activity and durability. This study introduces a low-cost, three-dimensional (3D) nanoporous ZrVFeCoNi material fabricated via chemical dealloying, at merely 0.16% of the cost of Pt. The structure-activity relationship between its microstructure and hydrogen evolution reaction (HER) performance was systematically explored. Lattice defect effects from multiphase intermetallic compounds, combined with multi-metal synergy, optimize H+ adsorption energy and electron transfer kinetics. The 3D nanoporous architecture provides a high electrochemical surface area with abundant active sites, enhancing electrolyte penetration and reducing interfacial mass transfer resistance. Consequently, the ZrVFeCoNi electrode exhibits outstanding HER performance, requiring only a 38 mV overpotential to reach 10 mA cm−2 and maintaining stable operation for 1000 h at 500 mA cm−2. Integrated into a full water electrolyzer (ZrVFeCoNi || IrO2/Ni), the system achieves a cell voltage of 1.60 V at a current density of 400 mA cm−2. Advanced characterization and density functional theory (DFT) calculations reveal that interfacial interactions and charge transfer at heterointerfaces drive catalytic activity, showcasing the potential of 3D nano-structured multiphase intermetallic compounds as high-performance electrocatalysts for green hydrogen systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3836-8
Flexible energy storage and harvesting devices, as core components of flexible electronic systems, have driven the transformation from external power supply to self-powering and from fixed forms to adaptive configurations, playing a pivotal role in wearable technology and the Internet of Things. MXenes, a class of two-dimensional transition metal carbides, nitrides, and carbonitrides, are promising candidates due to their excellent conductivity, mechanical flexibility, and tunable interfacial characteristics. Specifically, interfacial characteristics—surface energy, surface terminations, and interlayer spacing—decisively influence device performance. This review summarizes the influence of microcosmic interfacial characteristics on macroscopic properties, interfacial regulation strategies, and applications in flexible energy storage and harvesting. It concludes with challenges and perspectives for designing high-performance MXene-based energy devices. Key applications include flexible supercapacitors, batteries, and triboelectric nanogenerators. For instance, pillared Ti3C2 via CTAB pre-pillaring and Sn4+ pillaring regulates interlayer spacing, enhancing ion transport. The review integrates recent advances, such as MXene/nylon scaffolds for dendrite-free zinc anodes and MXene-bonded hard carbon films for sodium/potassium storage, demonstrating improved cycling stability and rate capability. The interfacial engineering strategies discussed provide a roadmap for overcoming stacking issues and achieving high energy density and mechanical robustness.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61113-4
Porous pyrolytic carbon (PPyC) serves as the buffer layer in TRi-structural ISOtropic (TRISO) fuel particles, providing storage for fission gases, preventing damage to outer layers, and absorbing stresses caused by fuel-kernel swelling. However, the changes of PPyC micro- and meso-structure at high temperatures remain insufficiently understood. In this study, PPyC fabricated by chemical vapor deposition was heat-treated from 1200 to 1600 °C and characterized across atomic-to-mesoscopic scales. Results show that the structure changes with temperature with a transition at approximately 1400 °C. Below 1400 °C, a decrease in Raman ID/IG ratio, narrowing of the graphite diffraction peak, and increased sp2 hybridization indicate progressive ordering associated with defect redistribution. Concurrent decreases in true density and mesopore volume, together with increased closed porosity, are consistent with partial conversion of open pores into closed pores. Above 1400 °C, increased ID/IG ratio, broadening of the diffraction peak near the rhombohedral graphite (101) reflection, and transition regions between crystalline and amorphous material observed by TEM indicate increasing structural disorder. Meanwhile, initially distinct PPyC particle boundaries blur and merge into broad, plate-like domains. Subsequent decrease in closed porosity and increase in mesopore surface area are consistent with partial connection of closed pores to the open-pore network. This work shows that intrinsic coupling between atomic-scale structural change and mesoscale pore connectivity provides a basis for assessing high-temperature structural stability of PPyC in TRISO fuel particles.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60616-5
CuZnAl (CZA) is a classic industrial catalyst for methanol synthesis from syngas, but its catalytic performance for CO2 hydrogenation to methanol is suboptimal. The catalytic mechanism of Cu species in CZA remains challenging. This study systematically investigates the valence state changes of active Cu species in CZA catalysts and their influence on catalytic performance by modifying catalysts with varying amounts of electron donor K, thereby identifying the catalytic function of Cu species with different valence states. H2-TPR, XPS, and HR-TEM characterizations reveal that highly dispersed K species supported on CZA catalysts inhibit the reduction of CuO, resulting in a small amount of Cu2O active species being produced under reaction conditions, thus causing a decrease in catalytic activity. Furthermore, XRD and Cu LMM spectra show that the proportion of Cu0 in K-modified CZA catalysts increases with K loading, but a higher proportion of Cu0 species on the surface obviously promotes the reverse water gas shift (RWGS) reaction. According to the results of in situ infrared spectroscopy, CZA catalyst follows the reaction pathway mediated by HCOO* in the hydrogenation of CO2 to methanol.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605015
The national greenhouse gas voluntary emission reduction trading market was relaunched in 2023, with China Certified Emission Reduction (CCER) as the trading unit, serving as a crucial supplement to the national carbon market. The initial phase includes the offshore wind power sector. This study evaluates the CO2 and air pollutant emission reduction effectiveness and economic feasibility of China's offshore wind power industry under the CCER mechanism. Using CCER methodology, baseline scenario analysis, and empirical data from 2020 and projections for 2025, we quantify reductions in CO2 and principal air pollutants (particulate matter, sulfur dioxide, nitrogen oxides) across coastal provinces. Emission inventories are constructed using authoritative grid emission factors. Economic viability is assessed by integrating levelized cost of electricity (LCOE), additional revenues from CCER transactions, and external environmental benefits. Results provide four policy insights: (1) The sector shows a positive trend in emission reduction and economic-environmental contribution, but faces financial deficit risk by 2025 without CCER subsidies; (2) Economically developed coastal provinces exhibit greater development potential; (3) Profitability analysis for 2020 and 2025 indicates sustainable economic returns with appropriate policy support; (4) Among air pollutants, nitrogen oxides reduction is largest, while sulfur dioxide reduction yields the most significant co-benefits. This study offers evidence-based recommendations for strategic planning and policy formulation in China's offshore wind industry.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225264
The high cost of high-purity hydrogen necessitates the utilization of low-cost industrial by-product hydrogen as an alternative gas source to reduce hydrogen storage costs. Industrial by-product hydrogen typically contains impurities such as H2S and CO, yet the poisoning mechanisms of these gases on superlattice hydrogen storage alloys during hydrogen absorption/desorption remain poorly understood. This study systematically investigates the poisoning effects and regeneration behavior of La0.65Mg1.32Ca1.03Ni9Y0.17 superlattice hydrogen storage alloy in atmospheres containing 10^-3 H2S and CO. The experimental protocol comprised 10 poisoning cycles followed by 1 regeneration, repeated to total 20 poisoning cycles and 2 pure hydrogen regenerations. Results show that in pure hydrogen, the alloy's hydrogen storage capacity gradually decreases after 22 cycles but is effectively restored after dehydrogenation at 473 K. In the presence of impurity gases, the hydrogen storage capacity retention rates after 10 poisoning cycles with H2S and CO are 3.56% and 2.71%, respectively; after 20 cycles, these decrease to 3.68% and 1.73%, respectively. After dehydrogenation at 473 K, retention rates recover to 40.35% and 98.27%, respectively. This indicates that poisoning severity follows the order CO > H2S, while regeneration difficulty follows H2S > CO. X-ray diffraction analysis reveals that after poisoning, the main phase transforms from AB3 to AB3H, but reverts to AB3 after high-temperature dehydrogenation. X-ray photoelectron spectroscopy shows that after H2S poisoning, CaS and CaSO4 form on the alloy surface, indicating irreversible chemical adsorption. In contrast, after CO poisoning, no new substances are detected, indicating reversible adsorption. This study clarifies the differentiated poisoning mechanisms of impurity gases and provides theoretical support for the application of rare-earth superlattice hydrogen storage alloys in complex atmospheres.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509047
To reveal the dynamic characteristics of ecosystem carbon flux and its response to meteorological factors, this study employed the Biome-BGC model to simulate gross primary productivity (GPP) and net primary productivity (NPP) of vegetation in Beijing for historical (2001–2014) and future (2051–2070) periods under SSP126 and SSP585 scenarios, using multi-source data including regional meteorology, vegetation type, and soil texture. The Mann-Kendall (M-K) test and Empirical Orthogonal Function (EOF) analysis were applied to examine spatiotemporal patterns and carbon use efficiency (CUE). Results indicate that Biome-BGC accurately reproduces historical carbon flux characteristics. Temporally, annual mean GPP and NPP exhibited fluctuating upward trends, ranging from 584 to 777 g C m−2 a−1 and 238 to 388 g C m−2 a−1, respectively. Spatially, GPP and NPP displayed both same-phase and opposite-phase distribution patterns. Annual mean temperature was the dominant factor influencing GPP and NPP trends, followed by solar radiation and precipitation. Under future scenarios, both GPP and NPP are projected to increase, with SSP585 showing greater enhancement. By 2070, GPP is expected to rise by 171 and 376 g C m−2 a−1 under SSP126 and SSP585, respectively, while NPP increases by 71.8 and 137 g C m−2 a−1. The spatial distribution of GPP and NPP exhibits a 'low-center, high-periphery' pattern, with multi-year means of 969 and 425 g C m−2 a−1. Future CUE is approximately 0.45, indicating substantial carbon sequestration potential of Beijing's vegetation under climate change.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3898-7
Platinum (Pt) is the benchmark catalyst for the hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) in acidic electrolytes, but its performance in alkaline media is limited by excessively strong hydrogen binding energy (HBE). Here, we report oxygen-modified ultrasmall RuCu nanocrystals (RuCu/C-200) as an efficient catalyst for both alkaline HER and HOR. The RuCu/C-200 catalyst exhibits excellent HER activity with an overpotential of 9 mV at 10 mA cm−2 and a Tafel slope of 19.7 mV dec−1. For HOR, it achieves a 4.2-fold higher exchange current density than the unannealed sample. Mechanistic studies reveal that the optimized HBE, hydroxyl binding energy (OHBE), and strongly hydrogen-bonded interfacial water, induced by oxygen modification, are the intrinsic determinants of the improved catalytic activity. This work underscores the potential of combining nanoscale structural design with oxygen modification to develop high-performance Ru-based electrocatalysts for both alkaline HER and HOR.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60710-4
Lignin pyrolysis is a promising route for sustainable production of high-value phenolic chemicals, yet the intricate radical reaction network remains a major bottleneck to optimizing product selectivity. This work constructs a standardized DFT computational database that systematically describes the fast pyrolysis of vanillyl alcohol at 823.15 K. The database features three key components: primary reaction pathways, thermodynamic energy barriers, and atomic-level electronic fingerprints. The dataset covers primary reaction pathways, secondary rearrangements, and both global and local reactivity indices of key intermediates. Notably, it innovatively integrates electronic-structure fingerprints, filling the gap in reaction-network–electronic-property correlation data. Standardized computational workflows and rigorous quality control ensure accuracy, consistency, and reproducibility. The public release of this dataset provides a reliable theoretical benchmark for mechanistic studies of lignin pyrolysis and offers foundational data support for rational design of new catalysts and refinement of reaction kinetic models. Ultimately, this database not only provides an important reference for data-driven catalyst development but also lays a theoretical foundation for precise regulation of lignin depolymerization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4030-y
In the era of artificial intelligence, efficient perception and processing of massive visual information demand advanced machine vision systems. Inspired by human visual adaptation, various optoelectronic devices have been developed, yet most rely on external gate voltages or complex circuits for dynamic sensitivity modulation. This work demonstrates an all-optically controlled biomimetic sensor based on a one-dimensional ZnO/MAPbBr3 heterojunction, achieving both positive and negative photoconductivity effects. By modulating oxygen vacancy states with ultraviolet light, the competition between intrinsic photoconduction and trap-mediated carrier capture is regulated, enabling dynamic control of visible-light photoresponse within a single device. This tunable behavior mimics scotopic adaptation (photopigment regeneration under weak illumination), photopic adaptation (photopigment bleaching in bright environments), and eyelid-like self-protection against intense light. The device operates without external gate bias or cascaded circuits, offering a promising strategy for next-generation intelligent biomimetic sensors in machine vision.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.