SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506031
The production of activated carbon from waste biomass such as cyanobacteria from Lake Taihu represents a promising resource utilization route. However, existing studies are mostly confined to laboratory scale, and the gap between laboratory processes and industrial production hinders the evaluation of technical feasibility and economic viability. This study optimized the process for producing cyanobacteria-based columnar activated carbon by co-processing cyanobacteria with garden waste (sawdust), and validated the process on an engineering-scale production line with a daily capacity of 5 t of raw materials. Economic feasibility was also assessed. Results showed that the optimized activated carbon exhibited a particle strength of 91.3% and a specific surface area of 571.44 m2·g−1. The engineering-scale line processed 5 t of raw materials daily, yielding approximately 1.18 t of activated carbon with stable quality: strength of 94.3% and specific surface area of 471.42 m2·g−1, featuring a microporous-dominant structure with coexisting micropores and mesopores. Cost analysis indicated a production cost of 3,595.65 CNY per ton of activated carbon, demonstrating favorable economic benefits. This work provides a basis for larger-scale production and application of cyanobacteria-based activated carbon.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60581-0
Lignin-derived oxygenated aromatics, particularly phenols and aromatic ethers, are promising feedstocks for synthesizing high-density, high-heat-sink aviation fuels via alkylation-hydrogenation processes. This study systematically evaluates the catalytic performance of various zeolites (Hβ, HZSM-5, MCM-41, and HUSY) in the alkylation of phenol with cyclohexanol. Characterization demonstrates that HUSY zeolite exhibits superior catalytic activity due to its favorable pore architecture and well-balanced acid site distribution, which synergistically facilitate molecular diffusion and catalytic transformations. To further enhance catalytic properties, HUSY was modified with citric acid at various concentrations and compared with NaOH and oxalic acid treatments. Results reveal that citric acid treatment preserves crystallinity while modulating acidity and pore structure. All modified zeolites enhance phenol alkylation activity. Notably, HUSY-0.5M, exhibiting the highest medium-strong acid to total acid ratio, achieves superior performance: 80.4% phenol conversion and 99.6% selectivity for alkylation products. The catalyst also shows high activity for various lignin-derived compounds (p-cresol, anisole, guaiacol), demonstrating broad applicability. This work provides a new strategy for valorizing lignin-derived phenols into high-value fuel precursors through alkylation.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605010
The underwater light environment is a critical limiting factor for the colonization of submerged macrophytes and the ecological restoration of shallow lakes. Previous studies rarely quantified the contribution of aquatic environmental factors to the water quality–underwater light–macrophyte relationship, nor did they comprehensively consider factor correlations or establish thresholds for macrophyte colonization. This study, conducted in a typical national wetland nature reserve (Hongze Lake), measured photosynthetically active radiation, light attenuation coefficient (Kd), euphotic depth (Zeu), water transparency (SD), total suspended solids (TSS), chlorophyll-a (Chl-a), total nitrogen (TN), and total phosphorus (TP). A simulation model for Kd was developed, spatial distributions of environmental factors were analyzed, and contribution rates to light attenuation were quantified. Results showed that the mean Kd was 10.31±3.76 m⁻¹, and the mean Zeu (0.53±0.24 m) was lower than the mean water depth (0.94±0.29 m), with a spatial pattern of shallower Zeu in the west and deeper in the east. TSS and Chl-a were the primary direct influencing factors, while TN acted mainly indirectly. To achieve effective macrophyte colonization under average water depth conditions, thresholds were determined: Zeu ≥ 0.94 m, SD ≥ 0.41 m, Kd ≤ 4.95 m⁻¹, and Chl-a ≤ 3.8 μg/L. These findings provide quantitative guidance for lake restoration and water quality management.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605009
Reservoir CO2 emissions are a critical component of the global carbon cycle, yet existing prediction models often neglect reservoir size stratification, mixing data from large, medium, and small reservoirs. This study addresses this gap by constructing a training dataset exclusively for large and medium reservoirs in China and developing a neural network-based CO2 flux prediction model. The model revealed significant latitudinal zonation, with CO2 fluxes in southern low-latitude basins (e.g., Yangtze, Pearl) substantially higher than in northern high-latitude basins (e.g., Yellow, Songliao). Statistical analysis identified total phosphorus (TP) content as the strongest driver, exhibiting a positive exponential correlation with CO2 flux (p < 0.01). Reservoir age and latitude showed significant negative correlations, while physical parameters such as reservoir area, pre-impoundment submersion ratio, and average water depth showed no significant national-scale correlation. The study underscores the heterogeneity of dominant drivers across basins and proposes differentiated carbon mitigation strategies: for southern high-emission basins, controlling phosphorus inputs through wastewater treatment and restricting aquaculture; for northern basins, enhancing soil conservation to reduce carbon-rich sediment influx; and for new reservoirs, implementing vegetation clearance before impoundment and optimizing flood discharge schedules. These findings provide a theoretical basis for carbon emission characterization and support low-carbon management of large and medium reservoirs in China.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032001
This study investigates the variation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and their monomer components during low-temperature thermal decomposition (250–500 °C) of municipal solid waste incineration fly ash from a typical mechanical grate furnace. Results demonstrate that pyrolysis temperature and time significantly affect the solid-phase removal rates of PCDD/F mass concentration and toxic equivalent (TEQ) concentration. The influence weights of temperature on mass and TEQ removal rates are 20.86 and 21.41, respectively, while those of time are 4.27 and 3.36. Response surface analysis identifies optimal conditions at 380 °C for 1.0 h. At 250–300 °C, both PCDFs and PCDDs concentrations increase synchronously, indicating enhanced formation. At 300 °C for 2.0 h, high-chlorinated congeners undergo dechlorination to low-chlorinated ones, notably increasing 2,3,7,8-T4CDD (I-TEF=1.0) and 1,2,3,7,8-P5CDD (I-TEF=0.5). From 350 °C upward, significant degradation occurs; at 380 °C (1.0 h), degradation rates for PCDDs and PCDFs reach 97.8% and 97.6%, respectively, effectively reducing TEQ-contributing congeners. The process proceeds in two stages: initial dechlorination, followed by destruction of dioxin-like compounds at higher temperatures. 2,3,7,8-T4CDD emerges as a critical component for detoxification. These findings provide a scientific basis for optimizing thermal treatment of fly ash to minimize environmental and health risks.