SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4235-6
Fluorite-structured oxides (HfO2, ZrO2) are promising for resistive random-access memory (RRAM) due to their scalability and tunable properties. However, achieving high resistive switching on/off ratios remains challenging. Here, we report a collaborative strategy combining Hf/Zr ratio optimization and Lu3+ doping to regulate band structure and oxygen vacancy concentration in Hf0.4Zr0.6O2 (LHZO) thin films. The resulting LHZO devices exhibit a resistive switching ratio of 8.4 × 10^4, two orders of magnitude higher than that of ZrO2 (1.2 × 10^3). Electrical characterization and synchrotron radiation photoemission spectroscopy reveal that Lu doping widens the bandgap to 4.95 eV, downshifts the valence band, and introduces defect states, collectively suppressing p-type conductivity and reducing off-state leakage current. Simultaneously, Lu3+ doping enriches oxygen vacancies, stabilizing ohmic conductive filaments in the on-state. This co-optimization of band structure and oxygen vacancies effectively enhances insulating properties in the high-resistance state and ohmic conductivity in the low-resistance state, leading to superior resistive switching performance with robust retention (>10^4 s). Our findings establish a fundamental strategy for tailoring electronic properties of doped HfZrO2 thin films toward high-performance RRAM applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3775-3
The urgent imperative for carbon-neutral chemical production has accelerated the development of solar-driven catalytic technologies that convert abundant C1 feedstocks (CO2 and CH4) into value-added C2+ molecules. Standalone photocatalysis remains constrained by rapid charge-carrier recombination and poor C–C coupling selectivity. This review critically examines multi-field-coupled catalysis—a transformative paradigm synergistically integrating solar energy with auxiliary thermal, electric, and magnetic fields. Through mechanistic dissection of photothermal, photoelectrochemical, and photomagnetic field cooperativities, it is summarized that thermal gradients attenuate phonon scattering to enhance charge-carrier drift mobility while vibrationally stabilizing reactive intermediates, electric potentials drive vectorial charge transport via Coulomb-force-directed separation and band alignment, and magnetic fields modulate spin-selective electron transfer through Zeeman splitting-mediated polarization to boost reaction specificity. This synergistic multi-field integration circumvents intrinsic limitations of single-mode photocatalysis by collectively reconfiguring reaction coordinates for selective C–C coupling. We further address persistent challenges in resolving ultrafast interfacial charge-transfer dynamics, scaling integrated field reactors for industrial deployment, and advancing in situ operando characterization of multiscale processes. Strategic research priorities are proposed to advance sustainable multi-field-coupled catalytic production of fuels and platform chemicals.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010203
The production and disposal of lithium batteries release not only hazardous metals and particulates but also substantial amounts of harmful organic pollutants. This study focuses on N-methyl-2-pyrrolidone (NMP) to investigate the environmental release and human exposure of organic pollutants throughout the lithium battery lifecycle. Using liquid chromatography-high-resolution mass spectrometry (LC-HRMS), NMP was quantified in environmental samples from battery production and dismantling facilities, as well as in pyrolysis products from simulated thermal recovery of mainstream lithium batteries. Key release stages were identified: slurry mixing and coating/drying during production; shredding, electrolyte volatilization, and high-temperature pyrolysis during disposal. In unprotected occupational settings, estimated NMP exposure via dust ingestion exceeded reference doses, underscoring the need for health impact assessments and evaluation of protective measures. This research provides critical insights into the environmental release and population exposure of organic pollutants across the lithium battery lifecycle, informing health policy for vulnerable populations.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604015
Shale gas extraction generates hazardous oily sludge, necessitating effective in-situ treatment. Microemulsion technology offers low energy consumption, cost efficiency, and high oil removal without heating. This study investigates single-surfactant microemulsions using sodium dodecyl sulfate (SDS) and alpha-olefin sulfonate (AOS), and composite microemulsions with sodium silicate (Na2SiO3). Phase behavior and effects of surfactant, alcohol, and salt concentrations on oil removal were examined. Optimal single formulations achieved removal rates of 86.33% for SDS (SDS:alcohol:NaCl = 2.72%:13.21%:2.17% mass ratio) and 87.45% for AOS (SDS:alcohol:NaCl = 2.72%:15.41%:2.17%). SDS microemulsions showed superior phase stability despite slightly lower removal efficiency. Composite SDS-Na2SiO3 microemulsion achieved 92.47% oil removal, outperforming single systems, and could be recycled five times while meeting national secondary reuse standards. AOS-Na2SiO3 exhibited better salt resistance, whereas SDS-Na2SiO3 showed better alcohol resistance. This work provides a novel approach for in-situ oily sludge treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3487-x
Continuous carbon fiber-reinforced ZrB2-SiC ceramic matrix composites are promising thermal protection materials for hypersonic vehicles and reusable spacecraft. Although injection-assisted vacuum impregnation (IVI) offers advantages such as shorter processing cycles, lower costs, and reduced fiber damage compared to conventional methods, phenolic/acetone-based IVI systems yield composites (designated as CPS) with limited ceramic contents. To address this, an aqueous slurry-based IVI approach was developed, producing composites designated as CHS. After a single IVI cycle, CHS achieved a ZrB2 phase volume fraction of 25 vol.%, 47% higher than CPS, while reducing processing time by 49%. After chemical vapor infiltration, CVI-CHS composite exhibited a room-temperature compressive strength of 106.78±10.53 MPa, representing a 28% improvement over CVI-CPS. Crack propagation analysis revealed discontinuous zigzag patterns under compression, dominated by fiber bridging and pull-out energy dissipation mechanisms. Flexural results revealed both composites retain considerable strength (111.15±12.46 and 83.15±12.03 MPa) along with low flexural modulus (13.00±2.41 and 13.52±6.99 GPa) and high strain tolerance (1.32%±0.018% and 1.07%±0.34%). It is attributed to the anisotropy of fiber preforms and the elastic modulus mismatch among different phases, which hindered effective constraint of fibers by the matrix and, in turn, facilitated mitigation of stress concentration. Additionally, CVI-CPS demonstrated superior X-band electromagnetic interference (EMI) shielding (34–36 dB) compared to CVI-CHS (22–27 dB), resulting from synergistic effects between pyrolitic and deposited carbon in the matrix of the former. Both composites showed enhanced EMI shielding efficiency with increasing temperature up to 600°C. This eco-friendly aqueous IVI strategy enables high-performance, cost-effective thermal protection materials with higher ceramic loading and tunable multifunctional properties.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507095
This study investigates the optimization of CO2 mineralization curing on the performance of a ternary cementitious system comprising steel slag, fly ash, and Portland cement. Specimens were fabricated with varying residual water-to-cement ratios (r/w), steel slag and fly ash contents, curing pressures, and durations, then subjected to standard curing and CO2 mineralization curing. Compressive strength and carbon sequestration rate were measured, and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to analyze mineral composition and microstructural evolution. Results indicate that compressive strength first increases then rapidly decreases with increasing residual water-to-cement ratio, with an optimal r/w below 0.15. Both compressive strength and carbon sequestration rate increase with higher steel slag content; the 50% steel slag + 10% fly ash formulation exhibited the highest values. Microstructural analyses revealed that CO2 mineralization primarily consumes hydration products such as Ca(OH)2, C-S(Al)-H, and AFt, generating abundant calcium carbonate that densifies the pore structure, thereby enhancing mechanical properties. Lower residual water-to-cement ratios, higher steel slag content, or extended curing durations increase the content and crystallinity of calcium carbonate. SEM observations confirmed the presence of densely packed, well-crystallized rhombohedral calcite in specimens with lower water-to-cement ratios and higher steel slag content. These findings provide a mechanistic basis for the engineering application of CO2 mineralization curing in ternary solid-waste cementitious materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605020
To address the high CO2 emission proportion in the industrial sector, distillers' grain waste was converted into biochar for CO2 adsorption from flue gas. Raw biochar suffers from weak pore adsorption and poor selectivity at elevated temperatures. This study employed ash self-templating and particle self-assembly to create hierarchical pores and simultaneously load amine groups onto distillers' grains-derived biochar, yielding amine-functionalized hierarchical porous carbon spheres. The amine loading significantly increased, providing more CO2 adsorption sites, while retaining macroporosity (total pore volume 0.0030–0.0066 cm3/g after amine loading), which enhanced morphological stability and CO2 mass transfer. The optimal sample, 0.2PW-K-CNF-PEI, exhibited a CO2 adsorption capacity of 1.03 mmol/g at 100 °C, a CO2 diffusion coefficient of 0.0495 min−1, and a selective adsorption capacity of 44 mg/g at 80 °C. This work offers a solution for valorizing distillers' grain by-products and capturing CO2 from low-temperature flue gas.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3945-8
Pillar[n]arenes, macrocyclic hosts with unique pillar-shaped architectures, exhibit dynamic planar chirality arising from restricted rotation of their hydroquinone units. This review summarizes recent advances in constructing chiral bis- and multi-macrocycles by fusing additional rings onto pillararene backbones. These systems serve as privileged platforms for chiral inversion molecular machines, particularly molecular universal joints (MUJs), and for integrating pillararenes with other macrocycles to create chiral platforms with circularly polarized luminescence (CPL). The design strategies, chiral inversion mechanisms, and attractive properties of these materials are discussed, highlighting their potential in chiral recognition, asymmetric catalysis, and chiral luminescent materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021005
Microplastic pollution in freshwater environments has escalated, leading to increased accumulation in wild fish. This study investigated the occurrence characteristics of microplastics (MPs) in the gills, gastrointestinal tract (GIT), and muscle of four wild fish species with different feeding habits from Baiyangdian Lake, China. MPs were detected in all tissues. The average abundance was highest in the GIT (11.63 ± 10.76 items/individual), followed by gills (7.44 ± 6.79 items/individual), and lowest in muscle (3.91 ± 3.16 items/individual). The majority of MPs were transparent and black fibers smaller than 0.5 mm. Polymer analysis identified polypropylene (PP) and polyethylene (PE) as dominant components. Significant differences in MP abundance were observed among species, with carnivorous and herbivorous fish (e.g., snakehead and grass carp) showing higher total MPs than omnivorous and planktivorous fish (e.g., mosquitofish and topmouth gudgeon). However, when normalized by body weight, smaller fish exhibited higher MP concentrations in the GIT, suggesting a greater risk per unit mass. This study provides baseline data on tissue-specific MP distribution in wild freshwater fish with varying feeding behaviors and habitats, highlighting the influence of trophic level and body size on MP accumulation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030403
Microplastics (MPs) act as vectors for co-migrating antibiotics and heavy metals, forming complex pollution systems with potential joint toxicity. However, the differential adsorption behaviors and underlying mechanisms of MPs toward organic versus inorganic pollutants remain insufficiently understood. This study selected polypropylene (PP) microplastics, a major component of agricultural plastic films, and investigated the adsorption of sulfamethoxazole (SMX) and Cr(VI) onto aged PP under varying environmental conditions. Results demonstrated that aging increased the maximum adsorption capacity by 2–3 times for both pollutants. Notably, aged PP exhibited approximately 30 times higher adsorption capacity for SMX than for Cr(VI). Characterization revealed that aging introduced oxygen-containing functional groups (e.g., carbonyl) on the MP surface, enhancing adsorption. Mechanistic analysis indicated that hydrogen bonding and electrostatic interactions dominated SMX adsorption, while Cr(VI) adsorption was primarily governed by electrostatic interactions and pore-filling. The stronger intermolecular forces for SMX compared to reversible pore-filling for Cr(VI) explained the observed differences. Increasing pH induced electrostatic repulsion, reducing adsorption of both pollutants. High concentrations of Na+ and Mg2+ caused charge shielding, potentially enhancing Cr(VI) adsorption but inhibiting SMX adsorption due to competition for active sites. The presence of organic matter (humic acid) had negligible effects on Cr(VI) adsorption but reduced SMX adsorption, likely due to complexation. These findings elucidate distinct molecular-level pathways for organic versus inorganic pollutant adsorption on aged MPs, highlighting the roles of hydrogen bonding and pore-filling in driving differential behaviors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3880-8
Formaldehyde oxidation reaction (FOR) demonstrates significant potential in energy conversion and chemical synthesis, yet developing catalysts for efficient operation at high current densities remains a challenge. Herein, we fabricated a Cu/Cu2O heterostructure nanowire catalyst on copper foam (Cu/Cu2O@CF) via interface engineering and investigated its FOR performance. Electrochemical tests show that Cu/Cu2O@CF exhibits excellent activity: it achieves 100 mA cm−2 at an ultra-low potential of −0.05 V (vs. RHE), outperforming most reported catalysts. Notably, this catalyst overcomes the deactivation limitation of conventional Cu-based catalysts above 0.5 V, maintaining a current density of 735 mA cm−2 at 0.6 V with excellent stability during long-term electrolysis. SCN−-induced Cu0 poisoning experiments confirm that Cu/Cu2O@CF retains a Cu/Cu2O mixed structure at 0.6 V, where Cu0-Cu+ synergy dominates its high activity. Density functional theory (DFT) calculations reveal two key advantages of this structure: it weakens OH− adsorption to avoid active site occupation, and reduces C–H bond cleavage barriers while promoting H* combination into H2. Product analysis shows Faradaic efficiencies for formate and H2 production are both ~100%. When coupled with the hydrogen evolution reaction (HER), the system's hydrogen production energy consumption is as low as 0.57 kWh m−3 H2, much lower than traditional water electrolysis. This work elucidates the regulatory mechanism of interface engineering on the FOR performance of Cu-based catalysts, expands the application of Cu-based heterostructures in high-current FOR, and guides the development of industrial-grade electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3873-7
The escalating demand for lightweight, multifunctional stealth materials in modern protective applications necessitates integrated solutions against electromagnetic interference (EMI), infrared (IR) detection, and incendiary threats. This study presents an innovative melamine foam (MF)-based composite featuring an asymmetric dual-nano conductive network, achieving absorption-dominated EMI shielding, IR stealth, and flame retardancy. Inspired by the Salisbury screen, the composite employs MF as an interlayer and flame-retardant thermoplastic polyurethane (TPU) nanofiber membrane as a substrate. The architecture comprises a carbon nanotubes (CNTs)-modified impedance matching nanofiber layer as the top absorber and a silver nanoparticles (AgNPs)-modified nanofiber layer as the highly conductive reflective bottom. Precise control of CNTs content and interlayer thickness enables tunable electromagnetic wave (EMW) absorption, yielding a low reflection coefficient of 0.03 and a high EMI shielding effectiveness of 79.23 dB at a total thickness of 4.40 mm. Even at 1.40 mm, effective absorption-dominated shielding is maintained. The performance remains stable under ultrasonic, compression, and bending tests, demonstrating high durability. The mechanism underlying absorption-dominated EMI shielding at reduced thickness, relying on destructive interference of EMWs enabled by the asymmetric dual-nano conductive network, is thoroughly elucidated. Additionally, the composite exhibits superior IR stealth and self-extinguishing properties. This work offers a feasible strategy for designing high-performance stealth materials with strong potential for personnel and communication equipment protection.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511076
This study investigated the altitudinal distribution and enrichment characteristics of heavy metals in the soil-plant system of the northern and southern mountains of Lhasa on the Tibetan Plateau. Soil and dominant plant samples were collected from three sites along an elevation gradient from 3,650 to 4,150 m, and concentrations of Cr, Cd, Cu, Zn, Ni, As, and Pb were analyzed. Soil heavy metal concentrations ranged from 0.06 to 184.4 mg·kg−1, with all elements except Cd and Pb exceeding local background values. Plant heavy metal concentrations were within normal ranges, indicating no obvious stress. Correlation analysis revealed significant positive correlations between soil Zn and Cd, Cr and Ni, and plant Zn and Cu. Except for Cr, Cu, and Cd, plant and soil concentrations of the same element were significantly correlated. Bioconcentration factor (BCF) analysis showed that most plants had weak enrichment capacity (BCF < 1), but five species, including Ephedra sinica and Rheum likiangense, exhibited BCF > 1 for Cd, with R. likiangense showing the highest BCF of 4.01. The enrichment capacity varied with altitude and species. Potential ecological risk assessment indicated that Cd posed a relatively high risk in plants, warranting attention. This study fills a gap in understanding the spatial distribution and enrichment of heavy metals in this region, providing a scientific basis for ecological management and environmental protection.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60650-0
Aldehydes and ketones are valuable oxygen-containing organic intermediates essential for synthesizing fine chemicals, fuels, and materials. Lignocellulosic biomass, as the most abundant renewable carbon resource with an annual production exceeding 180 billion tons, offers a sustainable route to produce platform carbonyl compounds such as furfural, 5-hydroxymethylfurfural (HMF), and low-molecular-weight aliphatic ketones via pyrolysis. This review systematically summarizes recent progress in catalytic pyrolysis of biomass for aldehyde and ketone production. It first outlines the structural features, types, and biomass-derived origins of typical carbonyl platform molecules. Second, it compares the decomposition pathways and intermediate evolution behaviors of cellulose-rich, hemicellulose-rich, and lignin-rich biomasses under non-catalytic pyrolysis, clarifying the influence of multicomponent synergistic effects on aldehyde and ketone formation. Particular emphasis is placed on the mechanistic roles and dominant reaction pathways of metal salts, metal oxides, and carbon-based catalytic systems in regulating key steps such as dehydration, decarbonylation, C−O/C−C bond cleavage, and skeletal rearrangement. The review identifies major challenges, including unclear catalyst structure-activity relationships, inadequate active site stability, and limited product selectivity. Future perspectives propose rational design of multilevel structured catalysts, integration of in situ characterization with multiscale simulation, and development of green scale-up and process integration strategies. This work aims to provide a systematic theoretical reference for high-value biomass utilization and renewable carbon conversion.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021202
To investigate the sources and health risks of heavy metals in PM2.5 during winter in Xi'an, hourly concentrations of eight heavy metals (Cu, Pb, Ni, Cr, etc.) were measured using an Amms-100 online analyzer at the Xi'an International Horticultural Exposition site from November 2024 to March 2025. The positive matrix factorization (PMF) model was applied for source apportionment, and the U.S. EPA health risk assessment model was used to evaluate carcinogenic and non-carcinogenic risks for different populations. Results showed that PM2.5 concentrations varied significantly across pollution levels, with an average of 173.5 μg·m−3 during heavy pollution, 4.1, 1.9, and 1.3 times higher than during non-pollution, light, and moderate pollution periods, respectively. Concentrations of Pb, Mn, and Cu increased with pollution level, indicating a combined effect of coal combustion and unfavorable dispersion. PMF identified five sources during non-pollution periods (industrial metallurgy, crustal dust, metal processing, etc.) but only four during polluted periods, with Cu contribution increasing significantly, suggesting a shift to traffic-related mechanical wear. Health risk assessment indicated that carcinogenic risks were highest in adult males, followed by adult females and children. Non-carcinogenic risks (HQ) for Zn and Cu were below 1, but Pb and Mn posed non-carcinogenic risks, with Mn being significant. The incremental lifetime cancer risks (ILCR) for As and Cr exceeded 10−4, identifying them as primary carcinogenic metals. This study provides scientific evidence for targeted air pollution control in Xi'an, emphasizing the need to strengthen controls on coal combustion, traffic, and industrial emissions during heating periods.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607023
The rapid population growth and accelerating urban development have made the comprehensive utilization of municipal sludge (MS) an urgent challenge. MS contains substantial organic matter and essential nutrients for crop growth, making it a promising soil amendment for the ecological restoration of mine waste rock. However, research evaluating the impact of MS application on soil health and ecological safety from a soil microbiology perspective remains understudied. Therefore, this study investigated the effects of MS and composted municipal sludge (CMS) on the ecological restoration of mine waste rock soil through pot experiments. High-throughput sequencing technology was employed to analyze changes in soil microbial community structure and diversity. Finally, network analysis and correlation heatmaps were utilized to elucidate the microbial driving mechanisms. The results indicated that after MS and CMS application, organic matter content increased from 20.38 g/kg (Level 3) to 38.52 g/kg (Level 2). The levels of available nitrogen, phosphorus, and potassium rose from Level 4, 6, 2, to Level 1, 4, 1, respectively. Fresh weight, aboveground height, root length, and stem diameter of ryegrass all increased significantly. Venn diagram and heatmap analyses indicated that lower application rates (<1.5 kg/m²) enhanced microbial community richness and diversity. This study confirms municipal sludge as an effective amendment for mine waste rock soil. It is recommended to limit application rates below 1.5 kg/m² in practical mine ecological restoration projects, with particular attention to long-term dynamics of heavy metals and salinity to ensure safe and sustainable land reuse.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60679-2
Olefin hydroformylation is a pivotal process for synthesizing high-value-added aldehydes, with applications extending from short-chain to long-chain olefins (C6+). Traditional homogeneous catalytic systems suffer from difficulties in separating and recovering precious rhodium (Rh), driving research toward heterogeneous catalytic systems. This review summarizes recent progress in supports for heterogeneous Rh-based catalysts, focusing on the influence of structural regulation strategies of inorganic oxide-supported, porous carbon-supported, organic porous polymer-based, zeolite-supported, and composite-supported catalysts on active site dispersion, regioselectivity, and cycle stability. Key findings include enhanced linear-to-branched (n/i) ratios and turnover frequencies (TOF) achieved through tailored support design. For instance, Rh1/CeO2 with morphology effects demonstrates molecular-level understanding of support effects, while Rh/activated carbon with surface oxygen groups improves catalytic performance in 1-hexene hydroformylation. Porous monophosphine polymers confine atomically dispersed Rh, achieving regioselective hydroformylation. Additionally, Rh-N4 single atoms and Rh clusters dual-active sites on supports yield ultra-high TOF. The review aims to provide insights for rational design of high-performance heterogeneous hydroformylation catalysts, addressing industrial challenges of catalyst recovery and stability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022702
This study systematically investigated the occurrence and vertical distribution of per- and polyfluoroalkyl substances (PFAS) in solid waste, leachate, and surrounding groundwater at a municipal solid waste landfill in Fuyang City, Anhui Province, China. A total of 23 PFAS were detected in solid waste, with total concentrations (∑PFAS) ranging from 7.95 to 172.28 ng·g⁻¹. Trifluoroacetic acid (TFA), an ultrashort-chain PFAS, was ubiquitous, contributing on average 59% to the total PFAS mass. PFAS composition varied with depth: long-chain PFAS dominated in middle and upper layers, while short-chain and ultrashort-chain PFAS were more abundant in deeper layers, indicating enhanced downward migration of shorter-chain compounds. Sulfonic acid PFAS exhibited increasing relative abundance with depth. Leachate ∑PFAS concentration was 14.35 μg·L⁻¹, dominated by short-chain compounds such as PFPrS and PFBS, consistent with the composition in bottom-layer waste. Groundwater surrounding the landfill contained multiple PFAS, with concentrations decreasing with distance from the landfill, confirming the landfill as a source of PFAS to the surrounding environment. Multivariate analyses (PCoA and Bray–Curtis dissimilarity) revealed that some groundwater samples closely resembled leachate in PFAS composition, suggesting direct impact via leachate migration. These findings underscore the role of landfills as significant reservoirs and sources of PFAS, particularly ultrashort-chain compounds, and highlight the need for improved leachate management to mitigate groundwater contamination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3977-8
Single quantum well (single-QW) two-dimensional (2D) perovskites are poised to revolutionize optoelectronic devices owing to their superior stability and optoelectronic properties. However, solution-processed 2D perovskites typically suffer from disordered multiple-QW structures, leading to inconsistent device performance. Here, we introduce a solvent-hydrolysis-driven method to control crystallization kinetics, yielding highly ordered single-QW 2D perovskite films. Dimethylamine (DMA), generated from the hydrolysis of N,N-dimethylformamide (DMF), serves as a critical mediator, preventing cluster aggregation and ensuring a uniform colloidal distribution. This approach circumvents the formation of a heterogeneous intermediate phase, thereby promoting the formation of a homogeneous (DMA,MA)PbI3 phase, which is essential for single-QW film development. The resultant photodetector exhibits outstanding performance, with a responsivity of 1153 mA/W and a detectivity of 6.98 × 10^12 Jones, along with excellent photostability under ambient conditions. These attributes render it ideal for photoelectric imaging sensors and large-scale integration. Our findings establish a scalable, solution-processed strategy for high-performance 2D perovskite materials, opening new avenues for advanced optoelectronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4031-6
Organic fluorophores operating in the second near-infrared (NIR-II, 1000–1700 nm) window are highly attractive for cancer phototheranostics. Yet, the advancement of aza-BODIPY-based NIR-II dyes remains challenging due to their limited spectral tunability and diminished fluorescence quantum yields (FLQY) under physiological conditions. Herein, we propose a rational donor-acceptor (D-A) molecular engineering strategy to construct an aza-BODIPY fluorophore, TPACN, featuring intramolecular charge transfer (ICT)-enhanced NIR-II emission and balanced photothermal performance. By introducing electron-rich triphenylamine (TPA) donors and peripheral cyano (–CN) acceptors, the optimized D-A coupling significantly strengthened the ICT effect, leading to broadened NIR absorption, a markedly red-shifted fluorescence peak at 1086 nm, and an exceptional fluorescence quantum yield of 1.55% in dichloromethane (DCM). When encapsulated in F127, TPACN nanoparticles (TPACN NPs) maintained a high aqueous FLQY of 0.20%, accompanied by a notable photothermal conversion efficiency (PCE) of 39% under 808 nm irradiation. The sterically twisted TPA units effectively alleviated aggregation-caused quenching (ACQ) and fine-tuned the excited-state energy dissipation pathways, realizing a synergistic balance between radiative (fluorescence) and non-radiative (heat) relaxation. Benefiting from these optimized photophysical properties, TPACN NPs achieved high-resolution NIR-I photoacoustic and NIR-II fluorescence dual-modal imaging, enabling accurate tumor visualization and efficient photothermal ablation in vivo. This work introduces a general design paradigm that exploits ICT modulation and steric engineering to overcome the intrinsic fluorescence bottleneck of aza-BODIPY systems, offering new molecular insights for the advancement of high-performance NIR-II dyes for precision phototheranostics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4216-7
Flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are promising for lightweight and mechanically pliable photovoltaics, yet their performance is limited by severe non-radiative recombination and residual stress. Here, we report a sealed constant temperature (SCT) annealing strategy that simultaneously optimizes the CZTSSe/CdS heterojunction and alleviates stress. Under uniform mild thermal conditions (85°C, 5 h), SCT annealing promotes gradient diffusion of Cd2+ into the absorber, partially substituting Zn2+, which optimizes band alignment, passivates interface defects, and suppresses near-interface CuZn defects. This reduces open-circuit voltage loss and improves fill factor. The flexible device achieves a power conversion efficiency of 13.07%, a significant improvement over the reference (12.1%). The SCT strategy also enhances mechanical flexibility by reducing residual stress. Our findings provide a controllable route to advance both efficiency and flexibility of flexible CZTSSe solar cells.