SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3629-3
Electrically pumped lasers with reduced physical dimensions are critical for future optical information processing, storage, and photonic integrated circuits. However, electrical injection in perovskite lasers faces challenges including material instability, non-radiative losses, and Joule heating. Here, we demonstrate an ultralow-threshold perovskite microlaser decorated with gold nanoparticles (AuNPs), enabling simultaneous optical pumping and current injection at ambient temperature. The lasing threshold is reduced to 8.6 μJ/cm², approximately 44% lower than that of pristine devices (15.3 μJ/cm²). The AuNPs, with optimized size, enhance both lasing performance and electrical properties, achieving a current injection density of 2.98 kA/cm². AuNPs accelerate hot-carrier cooling, reducing non-radiative recombination and mitigating Joule heating. The threshold decreases progressively with increasing electrical assist fraction. Stability tests confirm excellent resistance to aging and humidity, with stable lasing output under co-excitation in ambient air. This work underscores the feasibility of electrically driven perovskite microlasers, offering a pathway toward electrically pumped microlaser diodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3805-1
The sluggish kinetics of oxygen reduction and evolution reactions (ORR/OER) at the air electrode impede the practical deployment of fiber zinc-air batteries (FZABs) for wearable electronics. Conventional bifunctional catalysts suffer from an inherent activity trade-off due to the distinct mechanisms of ORR and OER. Here, we propose a spatial decoupling strategy to overcome this limitation by engineering isolated Fe single atoms and Fe–Ir dual-atom pairs on a nitrogen-doped carbon matrix (Fe/FeIr-NC). In this architecture, Fe single atoms serve as ORR centers, while Fe–Ir pairs with tunable spacing are tailored for OER, enabling complete functional separation and independent optimization. The catalyst exhibits an ORR half-wave potential of 0.91 V and an OER overpotential of 250 mV at 10 mA cm−2, yielding a record-low bifunctional gap (ΔE = 0.57 V) that outperforms all reported single- and dual-atom catalysts. A flexible fiber zinc-air battery based on this catalyst delivers a peak power density of 3920 W kg−1, along with a 1.4-fold increase in energy efficiency and a 2.6-fold extension in cycle life compared to the commercial Pt/C + IrO2 benchmark. This work not only breaks the traditional activity trade-off in bifunctional catalysis but also offers a promising route toward high-performance power sources for wearable electronics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024092906
Microplastic pollution in rivers and lakes has become a research hotspot, yet studies in Anhui Province have predominantly focused on northern and central regions, leaving southern Anhui under-investigated. This study addresses that gap by examining the Xin'an River in Huangshan City, a typical river in southern Anhui. Surface water and sediment samples were collected in December 2023. In surface water, microplastic concentrations ranged from 350 to 3700 n·m−3, with particles of 0–0.5 mm dominating (33.93%). Fibrous shapes were most prevalent (59.83%), and colored particles accounted for 50.27%. In sediments, concentrations ranged from 25 to 200 n·kg−1, with 0–0.5 mm particles again dominant (49.63%). Fibers comprised 47.08% of sediment microplastics, and white particles accounted for 34.74%. Polymer analysis identified polyethylene terephthalate (PET) as the most abundant material (36.61%), followed by polyamide (PA) (23.22%). Source analysis suggests that fibrous microplastics originate primarily from fiber-based products such as clothing, home textiles, and fishing nets. These findings provide essential baseline data for water resource management, pollution assessment, and ecological remediation of the Xin'an River.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010804
Heterogeneous Fenton technology employs solid catalysts to activate H2O2, generating hydroxyl radicals (·OH) that oxidatively degrade organic pollutants. Among reported catalysts, iron-based materials are most prevalent but suffer from insufficient active sites and sluggish Fe(III)/Fe(II) cycling. Compositing iron with carbon materials increases active site density and accelerates Fe(II) regeneration, thereby enhancing catalytic efficiency. This review summarizes recent advances in carbon/iron-based heterogeneous Fenton catalysts, analyzing reaction mechanisms and characteristics for organic pollutant removal. It also discusses external energy field-assisted strategies (e.g., photo-, electro-, and ultrasound-assisted) that augment reaction kinetics. The paper concludes with perspectives on future development of carbon/iron-based Fenton-like materials, emphasizing the need for scalable synthesis and mechanistic elucidation. Key challenges include maintaining stability under continuous operation and achieving cost-effective production. The review highlights that carbon/iron composites with optimized interfacial properties can significantly improve H2O2 utilization and broaden pH applicability, addressing limitations of conventional Fenton processes. Future research directions include designing catalysts with tailored porosity and surface functionality, and integrating physical fields to synergistically enhance pollutant mineralization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021005
Microplastic pollution in freshwater environments has escalated, leading to increased accumulation in wild fish. This study investigated the occurrence characteristics of microplastics (MPs) in the gills, gastrointestinal tract (GIT), and muscle of four wild fish species with different feeding habits from Baiyangdian Lake, China. MPs were detected in all tissues. The average abundance was highest in the GIT (11.63 ± 10.76 items/individual), followed by gills (7.44 ± 6.79 items/individual), and lowest in muscle (3.91 ± 3.16 items/individual). The majority of MPs were transparent and black fibers smaller than 0.5 mm. Polymer analysis identified polypropylene (PP) and polyethylene (PE) as dominant components. Significant differences in MP abundance were observed among species, with carnivorous and herbivorous fish (e.g., snakehead and grass carp) showing higher total MPs than omnivorous and planktivorous fish (e.g., mosquitofish and topmouth gudgeon). However, when normalized by body weight, smaller fish exhibited higher MP concentrations in the GIT, suggesting a greater risk per unit mass. This study provides baseline data on tissue-specific MP distribution in wild freshwater fish with varying feeding behaviors and habitats, highlighting the influence of trophic level and body size on MP accumulation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4146-8
The conventional trial-and-error approach for the research and development (R&D) of high-performance super-hydrophilic coatings presents long-standing challenges, including data scarcity, unclear structure-activity relationships, and lack of design guidelines. In this study, an innovative multi-model framework that synergistically integrates a specialized polymer large language model (PolyLLM) and a polymer machine learning model (PolyML) for intelligent R&D of super-hydrophilic coating systems is designed and demonstrated. During the hydrophilic polymer research phase, the multi-model leverages the domain-specific insights and chemical tool capabilities of the fine-tuned PolyLLM to systematically screen 852 hydrophilic monomers and generate 3880 hypothetical polymer architectures. By utilizing the PolyML, the multi-model enables precise performance predictions and quantitative evaluations of feature importance to facilitate efficient high-throughput screening of optimal structures from the generated polymer database. Experimental validation confirms that the multi-model achieves a mean absolute error (MAE) below 10% across various polymer property prediction tasks compared to experimental data. This approach leads to the rapid discovery of hydrophilic polymers with exceptional anti-swelling and wear-resistance. In developing super-hydrophilic coatings, the multi-model effectively combines PolyLLM's guidance for large-scale synthesis with PolyML's capabilities for precise formulation optimization and curing parameter adjustments. The effectiveness of multi-model is demonstrated by the accelerated development of high-performance anti-fogging coatings for swim goggles and optical films with outstanding water- and wear-resistance that significantly outperform leading commercial products. This multi-model offers a flexible approach for advanced polymer coatings, leading to a seamless connection between laboratory research and industrial development.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.