SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4249-2
Underwater bubble manipulation is critical for water electrolysis, heat transfer, and mineral flotation, yet existing strategies relying on buoyancy or Laplace gradient forces from asymmetric surface geometries suffer from limited flexibility and narrow applicability. This work introduces a temperature-responsive anisotropic cilia surface (TRAS) that achieves bidirectional long-range bubble transport by modulating elastic modulus and stiffness. The TRAS enables precise control over the asymmetric three-phase contact line and viscous resistance, facilitating reversible bubble motion. Experimental validation using aqueous ethanol droplets with varying surface tensions (73.16 mN/m for 0 vol% to 22.27 mN/m for 100 vol%) on cilia with center-to-center spacings of 0.2–1.0 mm reveals that transport direction depends on both cilia spacing and liquid surface tension. Droplets of 0 vol% and 20 vol% ethanol exhibit sustained reverse transport on hard cilia, while 60 vol%, 80 vol%, and 100 vol% solutions show sustained forward transport. Notably, 40 vol% ethanol droplets display bidirectional transport at 0.6 mm spacing, reverse transport at 0.8 and 1.0 mm, and forward transport at 0.2 and 0.4 mm. These results demonstrate that tuning surface tension and cilia spacing provides a versatile platform for directional bubble manipulation, with promising applications in heat transfer, electrochemistry, and gas handling systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024122501
Fullerene (C60) is an emerging atmospheric pollutant that may influence sulfate formation during haze events. This study investigated the effect of C60 on sulfate production in the gas-phase oxidation of SO2 by H2O2 using a flow tube reactor. Results demonstrated that the presence of C60 significantly increased sulfate yields. Control experiments varying C60 loading, H2O2 concentration, and ultraviolet (UV) irradiation revealed that higher C60 amounts, elevated H2O2 levels, and UV exposure enhanced the promoting effect. Mechanistic investigations via free radical trapping and X-ray photoelectron spectroscopy (XPS) indicated a pre-adsorption-oxidation pathway. XPS analysis showed electron transfer on the C60 surface, converting adsorbed S(IV) to S(VI), confirming direct participation of C60 in sulfate formation. Radical trapping experiments and model calculations confirmed that C60 promotes the generation of hydroxyl radicals (·OH) and superoxide radicals (·O2−), which are key oxidants driving SO2 conversion to sulfate. The study reveals that C60 particles markedly enhance atmospheric sulfate formation, offering a novel pathway for understanding sulfate generation mechanisms. These findings have implications for air quality modeling and haze mitigation strategies, as C60 may act as a catalytic surface for sulfate production in polluted atmospheres.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3936-8
The precise separation of enantiomers is essential for developing effective chiral drugs, yet conventional membranes are constrained by the ubiquitous selectivity-permeability trade-off and low flux, limiting scalable production of single-enantiomer drugs. Herein, we present a cascade reaction strategy integrating Sonogashira-Hagihara coupling and Friedel-Crafts alkylation to fabricate porous conjugated microporous polymer membranes (CCMP-M P1–4/SiO2). This approach enhances specific surface area by 400-fold compared to the product from the Sonogashira-Hagihara coupling reaction alone, creating interconnected porous networks that facilitate mass transport. This hypothesis was confirmed by pore-size gradient experiments, which revealed a critical size-matching effect: matched molecular dimensions enable high-speed mass transfer with 97% enantioselectivity, while mismatch reduces selectivity to 9%, as visualized in a separation performance matrix across four chiral molecules. Precise chiral recognition is programmable via absolute configuration control of chiral monomers, with the mechanism of “preferential adsorption–interfacial enrichment–promoted diffusion” confirmed by static adsorption and density functional theory calculations. This strategy achieves breakthrough performance: Naproxen flux reaches 37 mmol m−2 h−1, surpassing literature values, and enables membrane-based separation of Raceanisodamine (89% selectivity of 6S, 2′S and 6R, 2′R-isomer after cascade enrichment) for the first time. This work provides a new paradigm for designing high-performance chiral separation membranes, facilitating scalable and sustainable production of single-enantiomer drugs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3786-8
Conventional cancer diagnostic techniques, such as tissue sampling and microscopy, are invasive and prone to misdiagnosis, driving the need for non-invasive, precise alternatives. Chiral biophotonics, exploiting circularly polarized light (CPL), offers unique polarization-selective interactions with biological tissues, enabling higher imaging contrast and molecular-level discrimination. However, current CPL detection technologies are passive and single-mode, lacking dynamic tunability and parallel processing capabilities. Meanwhile, AI-assisted diagnostics rely on separated sensing and computing units, suffering from poor integration and transmission inefficiency. Here, we report a near-infrared (NIR) chiral organic synaptic photodiode with electrically tunable dual-mode operation, enabling simultaneous CPL detection and neuromorphic processing. Under negative bias, the device operates as a highly sensitive CPL detector for chiroptical signal acquisition. Under positive bias, it exhibits history-dependent synaptic behavior with photocurrent dissymmetry factor (g_ph) dynamically tunable up to -0.06. By integrating this device into an optical convolutional neural network (OCNN), we achieved intelligent cancer detection with CPL-based imaging. Experimental results demonstrate that CPL detection accuracy reaches 83%, approaching the theoretical 87%, significantly outperforming natural light detection at 65%. The device enhances image contrast and feature extraction, laying a foundation for intelligent, adaptive diagnostic systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3834-x
Lithium metal anodes face critical barriers to practical application due to dendritic growth and interfacial instability, which cause short cycle life and safety hazards. This work introduces a highly stable and ultrahigh-rate lithium metal anode using a lithiophilic Sm2S3-modified carbonaceous host. The in situ formation of a Li2S-reinforced interphase layer enables highly reversible lithium plating/stripping and uniform deposition. The modified anode achieves an ultrahigh rate capability of 20 mA cm−2 and ultralong cycling stability of 7440 cycles with dendrite-free morphology. In a 4.5 V anode-less Li||LiCoO2 cell with an areal capacity of ~1.93 mA h cm−2, the system sustains over 1100 cycles with 87.2% capacity retention under harsh conditions: an ultralow negative-to-positive capacity ratio (N/P) of ~0.26 and lean electrolyte of ~5 g Ah−1. Furthermore, an anode-less pouch cell with an ultrahigh areal capacity of ~6.01 mA h cm−2 delivers superior cycling performance even at an ultra-low N/P ratio of ~0.71 and ultra-lean electrolyte of ~1 g Ah−1, achieving a high energy density of 505 Wh kg−1. This work provides a scalable and effective strategy for advancing reliable, practical lithium metal batteries.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022302
The escalating environmental contamination by mercury ions (Hg2+) poses severe risks to ecosystems and human health, necessitating the development of rapid, sensitive, and cost-effective detection methods. In this study, Fe1-xS@CNT composite nanozymes were synthesized via a straightforward solvothermal approach. The nanozymes exhibit uniform morphology, structural stability, and significant peroxidase (POD)-like activity. The incorporation of carbon nanotubes (CNT) facilitates electron transfer, enhancing the Fenton reaction between Fe2+/Fe3+ to generate abundant reactive oxygen species (ROS), primarily hydroxyl radicals (·OH) and superoxide anions (·O2−). The synergistic action of these ROS and photogenerated holes (h+) promotes the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue-colored product (oxTMB), establishing a colorimetric system of Fe1-xS@CNT + H2O2 + TMB. The specific binding of S2− on the nanozyme surface to Hg2+ inhibits POD activity, reducing the absorbance of the system. This principle was harnessed to develop a colorimetric method for Hg2+ quantification in environmental water samples. The method demonstrates a linear range of 0.1–500 μg·L−1 and a limit of detection (LOD) of 0.04 μg·L−1. Validation in real water samples (campus and tap water) showed recoveries between 94.4% and 111.1% with relative standard deviations (RSD) below 3.0%, comparable to atomic fluorescence spectrometry. The method offers advantages of simplicity, rapid analysis, and naked-eye visibility, providing a novel approach for on-site monitoring of heavy metal pollutants.