SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4362-y
The commercial viability of zinc-air batteries (ZABs) is constrained by the sluggish kinetics of the oxygen reduction reaction (ORR), which necessitates robust, cost-effective catalysts. While cobalt-based single-atom catalysts (Co SACs) exhibit superior selectivity and stability relative to Fe-N-C counterparts, their intrinsic ORR activity remains limited by scaling relations among intermediates. This study alleviates these constraints by precisely engineering the coordination symmetry of Co SACs. Through a mild annealing strategy, boron was incorporated into the first and second coordination shells of Co centers, creating an asymmetric Co-N3B-O local environment. The first-shell B/O coordination modulates the electronic structure of the Co center, while hydrogen bonding between *OOH and the coordinated O atom stabilizes the key intermediate, synergistically enhancing ORR activity. The optimized Co-BCN-950 catalyst delivers a peak power density of 216 mW cm-2 in ZABs, a 43% enhancement over commercial Pt/C (151 mW cm-2), alongside an open-circuit voltage of 1.43 V and a specific capacity of 790 mAh g-1. These findings establish a paradigm for tailoring the local coordination of SACs, enabling next-generation high-stability energy storage systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4349-9
Sodium metal batteries are promising for large-scale energy storage due to sodium's abundance and low cost, but their commercialization is hindered by dendrite growth and low utilization of sodium metal anodes. Here, we report a yolk-shell structure with gold nanoparticles (Au NPs) confined in hollow carbon nanospheres (Au@HCN) as a robust seeding/hosting interphase. The encapsulation isolates Au NPs from direct electrolyte contact, mitigating parasitic reactions, while the void space accommodates volume changes during alloying. Notably, electrochemical testing reveals that Au NPs undergo alloying-induced amorphization upon sodiation, forming a Na-Au amorphous alloy that enhances sodiophilicity and ensures uniform Na nucleation. This amorphous phase, confirmed by ex situ X-ray absorption spectroscopy and transmission electron microscopy, reduces nucleation overpotential and promotes dendrite-free deposition. The Au@HCN electrode achieves a high Coulombic efficiency of 99.8% over 500 cycles at 1 mA cm−2 and a long cycle life of over 2000 hours at 0.5 mA cm−2 in symmetric cells. Full cells paired with Na3V2(PO4)3 cathodes deliver a specific capacity of 105 mAh g−1 with 92% retention after 500 cycles. This work provides a rational design for stable sodium metal anodes through encapsulation and alloying-induced amorphization, offering a pathway for practical sodium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3575-4
Halide perovskite memristors, known for their ion mobility, have emerged as strong candidates for computational units in next-generation memory and neuromorphic computing systems. Nevertheless, most memristors are limited to operating in a single mode, either resistive switching or threshold switching. In this work, we overcome this limitation by developing dual-mode α-formamidinium lead triiodide (α-FAPbI3) perovskite memristors with switchable volatile/nonvolatile states, enabled by engineered SnO2 electron transport layers (ETLs). Through molecular interface optimization using 3-(N,N′-dimethylmyristylammonio) propanesulfonate (Z14) and 4,4′-(1,10-phenanthroline-3,8-diyl)bis(N,N′-bis(4-methoxyphen-yl)aniline) (PNL), we achieved exceptional device stability. Volatile devices exhibited >500 switching cycles, while nonvolatile devices surpassed 1000 cycles, both maintaining a high on/off ratio (~10^3). Beyond memory applications, these devices successfully emulated biological functionalities. The volatile mode replicated four key nociceptor characteristics (threshold, relaxation, sensitization, and no adaptation), while the nonvolatile mode demonstrated advanced synaptic plasticity, including paired-pulse facilitation (PPF) and spike-timing-dependent plasticity (STDP). Capitalizing on this dual-mode synergy, we constructed a spiking neural network (SNN) for handwritten digit recognition, achieving a 93% accuracy rate—a significant milestone for perovskite-based neuromorphic systems. This study not only provides a material-level strategy for multifunctional memristor design but also bridges the gap between biological sensing and artificial intelligence, paving the way for adaptive neuromorphic hardware.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3610-7
Electrochemical CO2 reduction reaction (CO2RR) offers an attractive route to produce value-added multicarbon (C2+) products, yet suffers from competing hydrogen evolution and monocarbon production. Here, we propose a dual-confinement effect on CO2 reactant and *CO intermediate, induced by tuning the pore configuration of reconstructed covalent organic frameworks (RC-COFs). The highly crystalline microporous RC-COF-1, when coated on a Cu electrode, enhances local CO2 concentration and restricts CO diffusion, thereby promoting C-C coupling. In acidic electrolyte, the RC-COF-1@Cu electrode achieves a maximum C2+ Faradaic efficiency (FE) of 67.0% at 500 mA cm−2, while maintaining a total carbon product FE above 90% across a broad current density range (100–500 mA cm−2). Experimental and theoretical analyses confirm that the ordered micropores of RC-COF-1 modulate reactant adsorption and intermediate diffusion, leading to improved C2+ selectivity. This work underscores the critical role of COF pore architecture in microenvironment engineering for heterogeneous catalysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3485-0
Aqueous Zn-ion batteries (AZIBs) are promising for next-generation energy storage due to high safety and low cost, but their practical use is limited by Zn dendrite growth and side reactions. An ideal anode/electrolyte interphase should block water contact while enabling fast Zn2+ transport, yet conventional thick interphases increase ionic resistance and polarization. Here, we report a hydrophobic yet ultrathin (~5 nm) polydimethylsiloxane (PDMS) artificial interphase fabricated via conformal coating. The oxygen-rich PDMS layer selectively coordinates Zn2+ while its superhydrophobicity excludes water, and the ultrathin nature enables rapid Zn2+ conduction, enhancing the Zn2+ transference number by 2.28-fold. This synergistic design suppresses dendrites and mitigates hydrogen evolution. The PDMS-modified anode achieves 99.9% Coulombic efficiency over 3500 cycles, 880-hour symmetrical cell operation at 60% depth of discharge, and 2500-cycle full-cell endurance under lean Zn conditions (N/P ratio 5.7). Proof-of-concept pouch cells sustain 1400 cycles with a 0.01% decay rate. This molecular-scale interphase strategy provides a feasible pathway toward practical AZIB implementation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3545-7
Magnetically driven hydrogel robots show promise in biomedical and underwater applications due to remote controllability, flexibility, biocompatibility, and chemical stability. However, limited functional integration restricts their adaptability. Here, a universal modular assembly strategy is introduced using a self-healing κ-carrageenan/polyacrylamide hydrogel embedded with magnetic particles, enabling free assembly of magnetic actuation modules. These modules construct soft robots with complex geometries and magnetization distributions, allowing diverse deformations under magnetic fields. The strategy further integrates photocatalysis by embedding Ru-Bi2CrO6 photocatalysts into functional modules, yielding an oxygen-generating robot. This robot exhibits flexible underwater movement via magnetically controlled oscillatory actuation, minimizing water agitation while supplying stable oxygen to specific aquatic environments. The photocatalytic oxygen evolution rate reaches 389.1 μmol g−1 h−1. The hydrogel skeleton suppresses particle aggregation and sedimentation, and facilitates magnetic recovery. This scalable and adaptable approach advances multifunctional soft robot design.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010803
Global aquaculture is expanding rapidly, with China leading in production and being the only country where aquaculture output exceeds wild catch. This growth raises concerns about environmental contamination, particularly mercury (Hg), and the safety of aquaculture products. This study investigated Hg accumulation and trophic transfer in a typical ecological mariculture area in Tangshan, Hebei Province, by measuring species-specific Hg concentrations in sediments and various aquatic organisms. Sediment total mercury (THg) levels were extremely low, averaging 4.0 ± 1.3 ng·g−1 dry weight (n=56), attributed to sandy/silty sediments with low adsorption capacity and minimal external/internal Hg inputs. In aquaculture fish, muscle THg and methylmercury (MeHg) concentrations were 59.7 ± 30.0 and 53.8 ± 29.2 ng·g−1 wet weight (n=7), respectively, comparable to wild fish from the same area. This is due to efficient trophic transfer and biomagnification of Hg, especially MeHg, along the food chain, influenced by food chain structure, primary consumer accumulation, and metabolic rates. At three seafood consumption levels (41.6–255.6 g·d−1), estimated daily intakes (EDI) of MeHg for Chinese adults ranged from 0.01 to 0.40 μg·kg−1·d−1, with target hazard quotients (THQ) from 0.13 to 3.98. Except for Penaeus monodon and Metapenaeus ensis, all other aquaculture products at high consumption levels exceeded the USEPA safety threshold for MeHg EDI and had THQ > 1, indicating potential health risks.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021702
Bacteria and microorganisms in toilets can enter the air via aerosol plumes generated during flushing, posing potential health risks. This study evaluates the feasibility of electrochemical synthesis of hydrogen peroxide (H2O2) for household toilet disinfection. Disinfection experiments showed that at H2O2 concentrations of 50–200 mg·L−1, bacteria in toilet bowl seal water were completely inactivated within 4–24 h without generating harmful disinfection by-products. By installing a gas diffusion electrode in the toilet tank and utilizing oxygen from air to electrochemically synthesize H2O2 in situ, the total bacterial count in the seal water was reduced by more than 90% during normal toilet use, thereby lowering the risk of disease transmission via toilet aerosols. The results suggest that electrochemical H2O2 synthesis offers a safe, healthy, and environmentally friendly disinfection method for household toilets.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3952-5
High-entropy alloys (HEAs) and metallic glasses (MGs) are promising electrocatalysts but suffer from inherent limitations: HEAs lack corrosion resistance and uniform surfaces due to their crystalline nature, while MGs have limited compositional flexibility, restricting active-site diversity and electronic-structure tuning. High-entropy metallic glasses (HEMGs) integrate the structural disorder of MGs with the multi-principal-element chemistry of HEAs, offering a unique combination of robust corrosion resistance, homogeneous surfaces, and abundant tunable active sites. Using Pd20Pt20Cu20Ni20P20 as a model HEMG, we investigate its electrocatalytic performance for alcohol oxidation and hydrogen evolution. The HEMG exhibits superior activity and stability compared to conventional HEAs and MGs, attributed to its disordered structure and high configurational entropy, which promote optimized adsorption energies and accelerated charge transfer. This work bridges the performance gap between HEAs and MGs, demonstrating HEMGs as multifunctional electrocatalytic materials with potential for industrial applications.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608022
Since the first domestic sludge incineration project was commissioned at Shanghai's Shidongkou Wastewater Treatment Plant in 2004, sludge mono-incineration has been progressively adopted in economically developed Chinese cities. However, decentralized planning of wastewater treatment facilities and variable sludge characteristics complicate the centralized design and operation of incineration plants. This study, based on the planning and engineering design of a sludge incineration plant in Qingdao, analyzes sludge from major municipal wastewater treatment plants, which differ significantly in moisture and organic content due to varying influent characteristics and treatment processes. An energy balance model was constructed using data on sludge moisture and organic content, leading to a sludge allocation scheme and a simplified cost calculation method for heterogeneous sludge. This supports differentiated pricing and rational distribution in drying and incineration projects. Additionally, comparing conventional dewatering (to 76% moisture) and deep dewatering (to 65% moisture) from a "wastewater treatment plant + incineration" perspective, the study evaluates full-process costs and carbon emissions. Results show that deep dewatering increases dewatering costs and emissions but reduces transport and incineration costs and emissions, yielding lower total costs and emissions. The findings provide a basis for optimizing municipal sludge treatment planning and process selection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4004-3
The development of efficient and stable oxygen evolution reaction (OER) electrocatalysts is critical for clean energy technologies, yet conventional cobalt-based spinel catalysts often suffer from insufficient activity and structural instability under operating conditions. To address these challenges, this study proposes and constructs a cation-ordered spinel-like catalyst (HVI Metal-CoMoO4/NF). The unique crystalline framework induces significant Jahn-Teller distortion and pre-stabilizes a Co2+/Co3+ mixed-valence state at the cobalt active centers via asymmetric Co–O–Mo bridges, effectively optimizing bulk charge transport. Electrochemical tests demonstrate that its performance significantly surpasses that of benchmark materials, requiring only an overpotential of 307 mV to drive a current density of 100 mA cm−2 in 1.0 M KOH, with a Tafel slope of 63.13 mV dec−1, maintaining stable operation for over 320 h at high current density. Crucially, our structural and in situ characterization results clearly reveal a stable and well-crystallized reconstruction behavior from the surface into the bulk of the spinel-like pre-catalyst during the OER. This work fundamentally addresses the challenges of disordered reconstruction and unstable active phases in traditional spinel catalysts, providing a paradigm for regulating the dynamic evolution of electrocatalysts through precise structural design.