SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4248-2
Marine biofouling imposes substantial operational penalties on maritime assets, yet commercial silicone foul-release coatings rely on static, non-adaptive networks that cannot be reprocessed or repaired. This work introduces selenonium-salt-catalyzed dynamic siloxane exchange as a route to polydimethylsiloxane (PDMS) vitrimer coatings. The authors incorporate A16Se+ organoselenium catalysts into PDMS networks at loadings designated A16Se+xPDMS, enabling thermally activated siloxane bond exchange that confers vitrimeric stress relaxation, reprocessability, and high-temperature self-healing. Antibiofouling performance is benchmarked against pristine PDMS using colony morphology assays for Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, SEM imaging of bacterial adhesion after 3 h, Chlorella fluorescence adhesion quantification, zeta potential measurements, and 3-month seawater immersion panels. Reviewer 1 questioned the direct relevance of recyclability and high-temperature self-healing to marine antifouling and requested that surface elastic modulus and Pseudomonas antibacterial data be elevated to the main text. In response, the authors relocated scratch and self-healing results from Figure 5 to Supporting Information Figures S12 and S13, condensed the main-text discussion, and integrated surface elastic modulus data into Figure 4G and Pseudomonas antibacterial results into Figure 6A. The revised manuscript positions dynamic exchange as supporting evidence of network dynamics rather than as a primary antifouling metric, while foregrounding modulus and antibacterial performance as the application-relevant properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4395-x
Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4177-3
Chirality profoundly influences tumor therapy by regulating key physiological processes, yet the link between chirality and therapeutic properties of atomically precise metal nanoclusters (NCs) remains poorly understood. Atomically precise Au25 NCs protected by chiral cysteine ligands (L-Au25(cys)18, D-Au25(cys)18, and Rac-Au25(cys)18) were constructed and systematically investigated to elucidate the association between chirality and tumor therapeutic performance. Although no significant difference in enzyme-like activity was observed among the three NCs, Rac-Au25(cys)18 exhibited enhanced reactive oxygen species generation under 808 nm laser irradiation, achieving superior phototherapeutic effects in both in vitro and in vivo tumor models. The chiral Au25 NCs induced distinct cell death pathways: L-Au25(cys)18 primarily triggered ferroptosis, D-Au25(cys)18 induced both ferroptosis and apoptosis, and all three NCs activated disulfidptosis. In vivo, tumor inhibition rates for L-Au25, D-Au25, and Rac-Au25 groups were 46.7%, 42.5%, and 68.3%, respectively, with no significant body weight fluctuations and minimal hepatorenal toxicity. Hematological and histopathological analyses confirmed favorable systemic biocompatibility. This work clarifies the correlation between chiral structures and tumor therapeutic performance of gold NCs, providing experimental insights and theoretical support for the design of novel chiral nanomaterials and optimization of precise tumor phototherapeutic strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4134-6
Oral leukoplakia (OLK) is a prevalent premalignant lesion with malignant transformation risk. Current adhesive hydrogels lack lesion-specific adhesion and precision therapy. We synthesized DNA hydrogels via co-crosslinking of thiolated gelatin and thiolated oligonucleotide through disulfide bonds, incorporating Mn2+ and chlorin e6 (Ce6) via thiol-metal coordination and physical entrapment. Low-frequency ultrasound (LFUS) anchored complementary oligonucleotides onto the lesion surface, enabling site-specific bioadhesion through base pairing. Under high-frequency ultrasound (HFUS), Ce6 generated reactive oxygen species, triggering mitochondrial DNA (mtDNA) release in hyperproliferative epithelial cells. Concurrent HFUS accelerated Mn2+ release, potentiating cGAS recognition of cytosolic mtDNA and activating the cGAS-STING pathway. This induced dendritic cell maturation, priming naïve T cells into cytotoxic T lymphocytes, reversing the immunosuppressive microenvironment. The modality induced immunological memory, restraining OLK recurrence and impeding malignant transformation. This study introduces the first DNA-directed hydrogel bioadhesion strategy and proposes unprecedented cGAS-STING pathway-associated immunotherapy against OLK.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3709-4
Photoelectrocatalytic (PEC) detoxification of ofloxacin in hyposaline wastewater is hindered by weak built-in electric fields (IEF) and rapid charge recombination. Here, we report a crystal dipole engineering strategy using high-valence Mo-doped BiVO4 to enhance IEF and PEC activity. Mo incorporation breaks lattice symmetry, increasing the crystal dipole moment and amplifying IEF to 2.05 times that of pristine BiVO4. This promotes directional carrier migration, improving electron-hole separation efficiency. The optimized 4% Mo-BiVO4 photoanode achieves 96.5% ofloxacin degradation within 60 minutes and maintains 91.9% degradation efficiency in natural lake water containing saline and organic interferents, demonstrating exceptional anti-interference capability. This work provides a strategy for boosting photocatalytic performance through unit-cell dipole engineering, aiming to enhance sustainability in wastewater treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3683-y
Effective management of traumatic hemorrhage requires rapid blood loss control and facile removal of hemostatic materials to minimize secondary tissue damage. We fabricated a strongly adhesive aerogel (OPA) via Schiff-base crosslinking of oxidized hyaluronic acid (OHA) and ε-polylysine (ε-PL), enabling rapid hemostasis in lethal arterial trauma and on-demand removal via phase transition. OPAs exhibited tunable porosity and rapid blood absorption. Surface hydroxyl, amino, and carboxyl groups promoted strong hydrogen bonding with tissues, blood cells, and plasma proteins, enhancing tissue adhesion and platelet capture/activation. In a rabbit femoral-artery-injury model, OPA4 shortened hemostatic time by ~80% and reduced blood loss to 38% of the blank group. Notably, OPAs retained only 2% of initial adhesion after hydration, allowing gentle removal. OPAs also demonstrated excellent antibacterial activity, biocompatibility, and biodegradability. The simple one-step freeze-drying process and tailorable shapes offer scalable production and versatile applications. This study provides a versatile strategy for emergency and surgical hemostasis, combining rapid control of life-threatening arterial bleeding with on-demand atraumatic removal, promising improved patient outcomes and streamlined postoperative care.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3654-5
Hydrogen production by photosynthetic green algae is an efficient biological process that utilizes light energy to convert water and carbon dioxide into clean and renewable energy. In this paper, we constructed a hybrid system combining graphitic carbon nitride (g-C3N4) and Chlorella pyrenoidosa (Chlorella), in which g-C3N4 serves as an extracellular electron source and Chlorella acts as a biological reactor for specific hydrogen production. In particular, the electronic structure of carbon nitride was optimized by means of hydrothermal alkalization and copper ion doping, expanded the light absorption range and enhanced the light response ability. g-C3N4, as an extracellular electron source, can provide electrons for Chlorella to improve hydrogen production performance which is 3.7 times that of bare Chlorella. The construction of a biological hybrid system is a feasible optimization strategy for the hybrid system to promote the synergistic effect of the hybrid system by regulating the properties of non-living components.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4022-7
Transition metal nitrides (TMNs) have emerged as promising alternatives to noble metals in electrocatalysis due to their noble metal-like electronic structures, high conductivity, low cost, and robust chemical stability against corrosion and oxidation under harsh conditions. The rational design and controlled synthesis of TMNs with distinct structures are crucial for developing highly efficient electrocatalysts. This review comprehensively summarizes representative synthetic strategies for TMNs, including direct nitridation, solid-state reaction, sol-gel assisted reaction, and wet-chemical reaction. It presents distinct structural characterizations and demonstrates their advances in electrochemical applications. Finally, the remaining challenges and future research directions for exploring TMNs with well-defined structures are proposed, aiming to guide the development of high-performance electrocatalysts.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506005
The escalating generation of medical waste, driven by healthcare expansion and frequent medical activities, poses significant environmental and public health risks. Under the framework of ecological civilization, China is developing a comprehensive policy system for medical waste treatment and disposal, yet the current framework remains nascent and exhibits inconsistencies between national and local policies. This study systematically analyzes the status of national and local policies from 2003 to 2024, collecting 413 policy documents (166 from national ministries and 247 from provincial governments). The analysis examines temporal evolution, regional distribution, and policy focus, alongside the influence of medical waste output, treatment technologies, facility infrastructure, and major epidemic responses. Findings reveal distinct policy phases: initial self-disposal, exploratory management, foundational system building, and rapid development. Regional disparities are pronounced, with eastern coastal areas showing more advanced policies due to greater technical and financial resources. The surge in medical waste, particularly during the COVID-19 pandemic, underscores the need for enhanced regulatory guidance. Non-incineration technologies are gaining traction for their environmental and cost benefits, and facility coverage has improved but remains uneven. The study proposes five policy principles to foster technological innovation and industrial upgrading, ensuring safe medical waste management and environmental protection.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3912-0
This erratum corrects an error in the Chinese name of co-first author Tianxiao Xiao (肖天孝) as originally published in the article 'A multi-modal smart chest patch for real-time cardiopulmonary monitoring and anomaly detection' (Sci China Mater, 2025, 68(12): 4413–4422). The corrected Chinese name is 肖天笑. The correction applies solely to the author's name and does not affect the scientific content, experimental data, or conclusions of the original paper. The authors and publisher apologize for any inconvenience caused.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3451-2
Visual aesthetics is a key metric of semi-transparent organic photovoltaics (ST-OPVs) for building-integrated solar windows, yet previous studies have primarily focused on the compromise between efficiency and transparency. This work addresses the overlooked aspect of full visual aesthetic control, particularly the bidirectional reflected color for architectural harmony, via designing ST-OPVs with double-sided ultra-thin Ag/TeO2 transparent electrodes. This design facilitates full-spectrum color tunability covering the whole standard color gamut of CIE coordinates on both surfaces, achieved simply by adjusting layer thicknesses. The resulting devices exhibit neutral transparency (16.6%–27.0% average visible transmittance) and competitive power conversion efficiencies (8.1%–9.2%). Additionally, the devices demonstrate strong flexibility, with flexibility-adaptive coloration and curvature-enhanced aesthetics. This work presents an ST-OPV design featuring full visual aesthetics and considerable performance, paving the way for commercialization of organic solar windows for building and vehicle integration.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61100-6
Sodium-ion capacitors (SICs) are attractive for low-cost and safe energy storage, but their practical development is limited by sluggish Na+ storage kinetics and structural instability of anodes. Control of both bulk structure and surface chemistry can address these limitations. We report a heteroatom-rich porous carbon (HRPC) derived from spores via hydrothermal pretreatment, low-temperature carbonization, and acid-mediated functionalization. The optimized GLSHC-HNO3 anode exhibits hierarchical porosity and multi-element co-doping, enabling rapid ion/electron transport, improved electrolyte wettability, and abundant Na+ adsorption sites. Density functional theory calculations reveal distinct contributions of different heteroatom configurations to sodium adsorption. The HRPC anode delivers an ultrahigh reversible capacity of 446.1 mAh g−1 at 50 mA g−1, retains 237.3 mAh g−1 at 2 A g−1, and shows excellent cycling stability. A full SIC with a polyaniline-derived porous carbon cathode achieves an energy density of 114.4 Wh kg−1 at 290 W kg−1, 43.1 Wh kg−1 at 1450 W kg−1, and a maximum power density of 5800 W kg−1, with 84.3% capacity retention after 5000 cycles and nearly 100% Coulombic efficiency. This work establishes a scalable, sustainable route for converting biomass into high-value carbon anodes, providing a new pathway for high-performance sodium-ion energy storage.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60629-3
This study reports the synthesis of a novel Z-scheme heterojunction composite film comprising Ag/Bi2MoO6/BiOBr via electrochemical processes, ion-exchange techniques, and subsequent photodeposition of silver nanoparticles. The incorporation of Ag nanoparticles exploits localized surface plasmon resonance (LSPR) effects and serves as an electron mediator, establishing a Schottky barrier that suppresses charge recombination. The optimized 1.5% Ag/Bi2MoO6/BiOBr film achieves a CO production rate of 13.65 μmol/(g·h) from photocatalytic CO2 reduction, significantly outperforming the unmodified Bi2MoO6/BiOBr film. Photocurrent and impedance analyses confirm enhanced charge separation in the Ag-modified composite. A non-linear relationship between Ag loading and photocatalytic efficiency was observed, with optimal performance at 1.5% Ag. The proposed Z-scheme mechanism elucidates the synergistic interactions among components, providing a scientific basis for rational design of advanced photocatalysts and immobilized systems for CO2 reduction. This work offers insights into the development of efficient, sustainable photocatalytic technologies for carbon capture and utilization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040104
The oxidative transformation of 2,6-dichlorophenol (2,6-DCP) was investigated in three typical zonal soils: black soil, red soil, and brown soil. Results demonstrated that 2,6-DCP underwent oxidative coupling in all soils, yielding hydroxylated polychlorinated diphenyl ethers (OH-PCDEs) and hydroxylated polychlorinated biphenyls (OH-PCBs) as primary products. The highest oxidative efficiency occurred in black soil, with approximately 85.1% of 2,6-DCP transformed within three days. In contrast, red and brown soils exhibited lower efficiencies, indicating a strong dependence on soil properties. Thermodynamic analysis revealed that the oxidative coupling reaction is endothermic, with elevated temperatures favoring reaction progress. Furthermore, soil microorganisms and dissolved oxygen were identified as critical controlling factors, acting synergistically to drive the reaction. This study provides the first evidence of natural oxidative coupling of 2,6-DCP in soil, forming OH-PCDEs and OH-PCBs. These findings offer significant scientific insight into the environmental fate of halogenated phenolic pollutants in terrestrial systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3946-2
High energy-density lithium–sulfur (Li–S) batteries with rapid intermediate conversion and forbidden shuttle effect require superior electrocatalysts with tunable catalytic activity. In this protocol, binary FeNi3 alloy nanoparticles homogeneously embedded within carbon nanosheets (FeNi3/CNS) are synthesized to regulate the conversions of sulfur species. Time of flight-secondary mass ion spectroscopy reveals a significantly improved catalytic effect of binary FeNi3 alloy compared to bare Ni, which is confirmed by a larger Li2S amount generated during in situ X-ray diffraction measurement. Further anode characterization validates efficient shuttling suppression and good lithium metal protection. In Li–S batteries, electrochemical tests demonstrate a remarkable rate capability of 852 mAh g−1 at 3.0 C, and outstanding long-term cycle at 1.0 C (639 mAh g−1 after 500 cycles). Even under a wide operation temperature range (−15–60 °C), Li–S batteries exhibit stable cycling with high specific capacities under high current rates. Moreover, Li–S batteries using FeNi3/CNS attain a maximum areal capacity of 5.60 mAh cm−2 under ~4.0 mg cm−2 sulfur. This study highlights the advantages of adopting binary or multi-component metal alloys as electrocatalysts and points out the research directions to advance Li–S batteries into practical applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4008-2
Lung cancer, particularly non-small cell lung cancer (NSCLC), remains a leading cause of cancer-related mortality, with conventional therapies hampered by poor tumor specificity, low drug accumulation, and suboptimal efficacy. To address these challenges, we rationally designed a tumor-targeted, ferrocene-bearing, covalently immobilizable theranostic probe, dIR-CDF, for near-infrared (NIR) imaging-guided photodynamic-ferroptosis synergistic therapy. The probe exploits the overexpression of sulfenated proteins in the tumor microenvironment to specifically target integrin αvβ3-positive NSCLC cells and undergo covalent anchoring via the reaction between 1,3-cyclohexanedione and sulfenic acid, thereby enhancing tumor accumulation and retention. Under 808 nm irradiation, dIR-CDF generates singlet oxygen (1O2) for photodynamic therapy (PDT), while the sustained release of ferrocene catalyzes Fenton reactions to produce hydroxyl radicals (·OH), inducing ferroptosis. The synergistic action of PDT and ferroptosis amplifies lipid peroxidation and disrupts antioxidant defenses, leading to efficient suppression of NSCLC tumors in living mice. This work presents a universal and powerful theranostic platform for precise cancer diagnosis and treatment, with the covalent targeting strategy offering enhanced specificity and retention.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60671-8
The conversion of CO2 into gasoline-range hydrocarbons represents a sustainable pathway to achieve deep decarbonization in the transportation sector. Nevertheless, the traditional Fischer-Tropsch synthesis (FTS) suffers from a broad product distribution, which restricts the achievable selectivity toward C5−C11 gasoline-range hydrocarbons to roughly 45%. This study presents the development of a bifunctional catalyst that integrates In2O3/ZrO2 metal oxides with SAPO-11 molecular sieves, aiming at efficiently converting CO2/CO mixtures into C5−C11 gasoline hydrocarbons. Catalysts with varying In/Zr ratios were prepared via co-precipitation. By employing a COx (CO/CO2) co-feeding strategy (CO/COx = 0.5), the formation of by-product CO was significantly suppressed, thereby enabling the selectivity for gasoline hydrocarbons to exceed the maximum predicted by the Anderson-Schulz-Flory (ASF) model. Notably, under identical reaction conditions, the In2Zr1Ox/SAPO-11 catalyst exhibited higher performance compared with In2O3/SAPO-11 and ZrO2/SAPO-11. The COx conversion was elevated by 1.7% and 0.2%, while the selectivity toward C5–C11 hydrocarbons was enhanced by 8.0% and 16.0%, respectively. Furthermore, the In2Zr1Ox/SAPO-11 catalyst delivered a single-pass performance of 24% COx conversion and 68% selectivity for C5−C11 hydrocarbons at 380 °C, 3 MPa and a gas hourly space velocity (GHSV) of 2400 mL/(min·g). Within this product distribution, isoparaffins accounted for 32.6% of the total components, corresponding to an isoparaffin/neoparaffin ratio of 12.3. After 150 h of stability testing, the catalyst maintained a single-pass COx conversion of 23% and a C5−C11 selectivity of ~65%, demonstrating excellent catalytic activity and promising potential for industrial application.