SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4248-2
Marine biofouling imposes substantial operational penalties on maritime assets, yet commercial silicone foul-release coatings rely on static, non-adaptive networks that cannot be reprocessed or repaired. This work introduces selenonium-salt-catalyzed dynamic siloxane exchange as a route to polydimethylsiloxane (PDMS) vitrimer coatings. The authors incorporate A16Se+ organoselenium catalysts into PDMS networks at loadings designated A16Se+xPDMS, enabling thermally activated siloxane bond exchange that confers vitrimeric stress relaxation, reprocessability, and high-temperature self-healing. Antibiofouling performance is benchmarked against pristine PDMS using colony morphology assays for Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, SEM imaging of bacterial adhesion after 3 h, Chlorella fluorescence adhesion quantification, zeta potential measurements, and 3-month seawater immersion panels. Reviewer 1 questioned the direct relevance of recyclability and high-temperature self-healing to marine antifouling and requested that surface elastic modulus and Pseudomonas antibacterial data be elevated to the main text. In response, the authors relocated scratch and self-healing results from Figure 5 to Supporting Information Figures S12 and S13, condensed the main-text discussion, and integrated surface elastic modulus data into Figure 4G and Pseudomonas antibacterial results into Figure 6A. The revised manuscript positions dynamic exchange as supporting evidence of network dynamics rather than as a primary antifouling metric, while foregrounding modulus and antibacterial performance as the application-relevant properties.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4480-1
Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025030602
In the context of accelerated urbanization, regional air composite pollution in medium and large urban agglomerations is primarily characterized by PM2.5-O3 compound pollution. To elucidate the meteorological causes of PM2.5-O3 compound pollution in the Yangtze River Delta (YRD) region over the recent seven years (2017–2023), this study analyzed monitoring data from typical cities (Nanjing, Shanghai, Hangzhou, and Hefei) using Pearson and partial correlation coefficients. Results indicate: (1) PM2.5 pollution exhibited a significant downward trend across all four cities, with notable improvement during the COVID-19 pandemic in 2020, underscoring the effectiveness of air pollution control measures. Conversely, O3 pollution remained elevated or increased in some cities, indicating persistent challenges in O3 control. (2) During O3 pollution episodes, PM2.5 and O3 concentrations were positively correlated, whereas during PM2.5 pollution episodes, they were negatively correlated. (3) Compound pollution days were predominantly observed from February to October, with the highest frequency (20 days) occurring from April to June. (4) The significant reduction in PM2.5 weakened the aerosol 'umbrella effect', enhancing surface radiation and promoting near-surface O3 formation. Concurrently, changes in the NOx/VOCs ratio weakened O3 titration, and climate warming accelerated O3 precursor generation and potentially altered boundary layer structure, collectively contributing to O3 accumulation in the cold season and an increasing frequency of compound pollution during that period. (5) The formation mechanisms of PM2.5 and O3 are driven by distinct meteorological conditions, with low overall concentration correlation; however, under compound meteorological conditions such as high temperature, stagnant air, and weak diffusion, both pollutants tend to rise synchronously, indicating that compound pollution events are typically driven by multiple adverse meteorological factors. This study demonstrates that from 2017 to 2023, PM2.5 pollution significantly decreased while O3 pollution showed an increasing trend. Compound pollution was concentrated in April–June and influenced by high temperature, stagnant air, and weak diffusion. With effective PM2.5 control, enhanced surface radiation and changes in O3 precursors led to O3 accumulation in the cold season, increasing compound pollution frequency. Overall, compound pollution is driven by multiple meteorological factors, posing complex challenges for control.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4010-4
Liver fibrosis, a critical pathological consequence of chronic liver injury, remains a therapeutic challenge due to its complex mechanisms and limited effectiveness of conventional treatments. Recent advancements in two-dimensional (2D) nanomaterials, such as graphene derivatives, transition metal dichalcogenides (TMDs), black phosphorus nanosheets (BPNSs), MXenes, and layered double hydroxides (LDHs), have created novel opportunities for antifibrotic therapy. These materials exhibit exceptional physicochemical properties, including ultrahigh surface area, tunable surface chemistry, biocompatibility, and photothermal/electrochemical functionalities, enabling multifaceted interventions in fibrosis progression. The core therapeutic strategies mainly involve modulating hepatic stellate cells (HSCs) activation, inhibiting excessive extracellular matrix (ECM) deposition, and alleviating oxidative stress and inflammatory responses. However, 2D nanomaterials still face great challenges, such as long-term biosafety, precise functionalization for tissue-specific targeting, and scalable synthetic methods. This review systematically summarizes the recent breakthroughs in anti-fibrosis strategies based on 2D nanomaterials, elucidates their potential mechanisms of action, and explores the prospects for clinical translation of these nanoplatforms. Serving as a nexus between materials science and hepatology, 2D nanomaterials offer revolutionary prospects for precision medicine applications in hepatic fibrosis management.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4057-4
The escalating use of ionizing radiation in medical and industrial applications necessitates lead-free, flexible, and sustainable shielding materials. Current development relies on empirical trial-and-error, which is inefficient. This study introduces a machine learning-assisted Monte Carlo simulation strategy for rapid optimization of metal filler compositions for X-ray attenuation across 40–120 kV. Guided by this AI-driven approach, polyvinyl alcohol (PVA)-based gels containing uniformly dispersed Bi/W/Gd2O3 nanoparticles were developed, forming within 1 minute at -20°C using a PVA-DMSO/H2O co-solvent system. The optimized gel with 50 wt% metal loading exhibits exceptional mechanical properties: tensile strength of 1.76 MPa, toughness of 6.3 MJ m−3, and elongation of 600%. It achieves >98% X-ray shielding efficiency at 5 mm thickness, outperforming lead composites at 120 kV. The physically cross-linked network provides recyclability and anti-freezing capability, retaining flexibility at -50°C. This work establishes a data-driven paradigm for designing high-performance radiation-shielding materials, demonstrating AI's potential to accelerate materials discovery and enable scalable fabrication of eco-friendly protective systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4216-7
Flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are promising for lightweight and mechanically pliable photovoltaics, yet their performance is limited by severe non-radiative recombination and residual stress. Here, we report a sealed constant temperature (SCT) annealing strategy that simultaneously optimizes the CZTSSe/CdS heterojunction and alleviates stress. Under uniform mild thermal conditions (85°C, 5 h), SCT annealing promotes gradient diffusion of Cd2+ into the absorber, partially substituting Zn2+, which optimizes band alignment, passivates interface defects, and suppresses near-interface CuZn defects. This reduces open-circuit voltage loss and improves fill factor. The flexible device achieves a power conversion efficiency of 13.07%, a significant improvement over the reference (12.1%). The SCT strategy also enhances mechanical flexibility by reducing residual stress. Our findings provide a controllable route to advance both efficiency and flexibility of flexible CZTSSe solar cells.