SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4467-x
Conventional eye-movement interaction systems depend on video capture, infrared tracking, and image recognition, which impose inherent constraints on accuracy, response latency, and stability. This study introduces an eyelash-guided signal interaction system based on a triboelectric nanogenerator (PF-TENG) using PDMS-FDTS thin films. The system employs eyelash movements as interactive inputs, eliminating the need for complex optical acquisition devices. A CNN-LSTM hybrid neural network classifies distinct eyelash movement patterns with a classification accuracy exceeding 98.5%. The PF-TENG device exhibits ultra-flexibility and transparency, enabling seamless integration onto eyeglasses without obstructing the user's field of view. Experimental validation demonstrates real-time monitoring of ocular states for driving fatigue detection, accurately identifying fatigue signs and enhancing application potential in intelligent driving. The system offers a natural, comfortable input modality and significant advantages for human-machine interaction, with broad prospects in eye-movement control and intelligent transportation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3607-9
Enhancing light olefin selectivity and extending catalytic durability remain critical challenges for ZSM-5 zeolites in methanol-to-olefins (MTO) conversion, primarily due to inherent diffusion restrictions along the MFI b-axis and poor coke accommodation. Here, we report a hierarchically single-crystalline ZSM-5 sheet architecture featuring interconnected multiscale porosity and a remarkably reduced b-axis thickness (<50 nm), quantitatively verified by three-dimensional electron tomography. Real-time confocal laser scanning microscopy tracking demonstrated significantly enhanced molecular diffusivity compared to conventional micron-sized ZSM-5 (Micro-ZSM-5). This engineered structure distributes abundant aluminum sites on highly accessible diffusion pathways, achieving an enlarged coke accommodation of 16.31 wt% with a coke deposition rate of 0.59 mg g−1 h−1, only one third of that in Micro-ZSM-5. In continuous MTO operation, the hierarchical ZSM-5 sheet (Hier-ZSM-5-S) maintained an average ethylene and propene selectivity of 63.5% for 22.2 hours (WHSV = 3.6 h−1, T = 480°C), which was 19% higher and 6.5 times longer than Micro-ZSM-5, respectively. This hierarchically shortened b-axis structure establishes a generalizable paradigm for enhanced diffusion and coke accommodation in precisely designed pore systems, applicable to various reactions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3653-2
Designing photosensitizers with efficient intersystem crossing (ISC) and long-lived triplet excited states is critical for photodynamic therapy (PDT). However, conventional molecular design principles often rely on heavy-atom effects or specific donor-acceptor architectures, limiting generality. Here, we report a facile and rational strategy to convert intrinsically non-photosensitizing fluorophores into effective reactive oxygen species (ROS) generators by introducing guanidinium substituents. The modified photosensitizers exhibit prolonged triplet excited state lifetimes and considerable ROS production, in stark contrast to unmodified fluorophores which show intense fluorescence and negligible ROS generation. Electron paramagnetic resonance spectroscopy and high-resolution mass spectrometry confirm the formation of stable nitrogen-centered radical cations on the guanidinium moiety, stabilized by p-π conjugation. Mechanistic studies indicate that these radicals promote ISC and prolong triplet state lifetimes. In vitro and in vivo experiments demonstrate that guanidinium-modified photosensitizers induce immunogenic cell death (ICD) and elicit potent anti-tumor immunity. This work provides a universal and facile strategy for designing organic photosensitizers through stable radical cation-containing building blocks, expanding the scope of PDT agents.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507110
Algal-derived taste and odor compounds (2-methylisoborneol, 2-MIB, and geosmin, GSM) in drinking water sources are poorly removed by conventional treatment. This study systematically evaluated the standalone and combined performance of ozone micro-nano bubbles (O3-MNBs) oxidation and powdered activated carbon (PAC) adsorption for removing 2-MIB, GSM, and algal cells from source water. Results showed that O3-MNBs pre-oxidation achieved >97.5% removal of odorants at 400 ng·L−1 and 67.2% algal cell removal within 30 min. When applied as a deep treatment stage, the degradation rate constant (k) was 10.1%–25.6% higher than in pre-oxidation due to lower background matrix interference. Both pre-oxidation and deep treatment reduced effluent concentrations of 2-MIB and GSM to below 10 ng·L−1, with oxidation kinetics fitting pseudo-first-order models (R²>0.95). PAC adsorption of both compounds followed pseudo-second-order kinetics (R²>0.99), with GSM equilibrium adsorption capacity approximately 20.0% higher than that of 2-MIB. In pure water, adsorption capacity increased by >10.0% compared to raw water. Based on kinetic models, a quantitative prediction method was established for O3-MNBs oxidation and PAC adsorption processes, aiming to achieve efficient odorant removal and cost optimization, providing theoretical support for advanced drinking water purification and smart water plant construction.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512072
Drainage pipeline defect detection predominantly relies on closed-circuit television (CCTV) inspection, which is labor-intensive, inefficient, and prone to missed detections. Although deep learning-based object detection has been applied, it suffers from low precision, recall, and speed in practical scenarios. This study proposes an engineering-oriented detection scheme achieving high recall and low miss rates. The annotation phase employs a cross-frame strategy combining manual labeling of first and last frames with interpolation and tracking-based refinement. Data preprocessing introduces perceptual hashing to identify similar images, enhancing training efficiency. For detection, a Faster R-CNN model is enhanced with Focal Loss to focus on hard examples, defect classification and grading, and a dynamic threshold strategy to improve recall. Validated on 5,068.72 m of real pipeline data, the method achieves a recall rate exceeding 98% across 16 defect categories, a miss rate of only 2% for grade 4 defects, and a 425% improvement in per-segment detection efficiency compared to manual screening. These results demonstrate the method's effectiveness in balancing recall, miss rate, and speed for engineering deployment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024121101
The excessive and uncontrolled use of antibiotics inevitably leads to their release into natural environments, accelerating the production, occurrence, and transport of resistant bacteria and resistance genes. Among these, antibiotic resistance plasmids (ARPs) pose a significant public health challenge due to their environmental persistence and ability to spread and amplify within microbial communities. This study used the tetC gene-pUC18 plasmid as a model ARP to investigate aggregation behavior in aqueous environments under varying pH (3–7), ionic strength (0.001–0.1 mol·L−1 NaCl and 0.001–0.05 mol·L−1 CaCl2), and in the presence of different concentrations of natural colloids. Results indicate that at low pH, ARP structure condenses inward and functional groups may protonate, reducing negative charge and overall size. Compared to Na+, Ca2+ forms cationic bridges between negatively charged phosphate diester groups, significantly enhancing aggregation. Natural colloids induce heteroaggregation with ARPs, with aggregate size increasing with colloid concentration. This study provides scientific evidence for elucidating ARP behavior in soil and groundwater, crucial for assessing risks to human health and ecosystems and understanding global circulation mechanisms.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024102303
Fluoride-containing wastewater treatment typically relies on calcium-based precipitation and flocculation, which suffer from low compliance rates and difficult valorization of fluoride-laden sludge. This study introduces a novel bismuth upconversion luminescent glass (BULG) synthesized from Bi2O3, SiO2, Yb2O3, and Er2O3, designed for efficient fluoride removal and subsequent photocatalytic application. By varying the Bi2O3:SiO2 molar ratio, a series of BULGs with superior upconversion luminescence were obtained. Under optimal conditions (Bi3+:F− molar ratio = 1:1, pH = 2), fluoride removal efficiencies exceeded 97% for all compositions, with the 0.7:0.3 Bi2O3:SiO2 formulation achieving 99.9% removal and rapid settling of the precipitate. The fluoride removal products retained upconversion luminescence and exhibited semiconductor heterojunctions, enabling complete photocatalytic degradation of ciprofloxacin (100% within 60 min). This approach not only efficiently removes fluoride ions but also valorizes the waste into a functional photocatalyst, offering a promising strategy for fluoride-containing wastewater treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3407-0
Grain boundary (GB) engineering has emerged as a promising strategy to enhance the near-room-temperature performance of Mg3(Sb,Bi)2-based thermoelectric materials, yet effective control of Mg distribution at GBs remains a significant challenge. Here, we report a novel approach to achieve targeted Mg segregation at GBs through strategic Ag incorporation in Mg3.3Sb0.5Bi1.497Te0.003. Through comprehensive microstructural characterization and first-principles calculations, we demonstrate that Ag preferentially segregates at GBs, forming Mg-rich MgAg alloy phases while maintaining limited solid solubility within the matrix. This unique GB architecture simultaneously optimizes multiple thermoelectric parameters: the Mg-rich GB regions significantly provide efficient carrier transport channels and enhance carrier mobility, while the MgAg phases and lattice disorders effectively scatter phonons without disrupting electron transport. Consequently, the optimized composition (x = 0.01) exhibits a remarkable enhancement in power factor at 300 K and maintains an average ZT of ~1.0 across 300–400 K. The material also demonstrates excellent mechanical properties and thermal stability, making it particularly suitable for near-room-temperature applications. Our findings not only establish an effective strategy for GB engineering in Mg3(Sb,Bi)2 systems but also provide valuable insights into the rational design of high-performance thermoelectric materials through interface modification.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508081
Traditional soil thermal remediation requires high temperatures (>300 °C), which can damage soil structure, increase energy consumption, and elevate carbon emissions. This study developed a Cu–CeOx/TiO2 trimetallic catalyst to enable low-temperature thermal remediation of naphthalene-contaminated soil. Using nano-TiO2 as a support, catalysts with varying Cu/Ce ratios were prepared via impregnation-calcination. Material characterization (XRD, TEM, XPS, etc.) revealed that Cu and Ce incorporation induced crystal defects in TiO2, enhancing lattice oxygen activity and electron mobility, thereby generating more oxygen vacancies and hydroxyl radicals. Performance evaluation using a TGA-GC-FTIR-MS platform showed that the catalyst with Cu:Ce = 1:1 achieved the best remediation efficiency, reducing the thermal remediation temperature from 250 °C to 211.5 °C and increasing the removal rate by an average of 19.49% compared to the non-catalyst group at the same temperature. The catalyst facilitated stepwise degradation of naphthalene into smaller organic molecules (alcohols, carboxylic acids, aldehydes) and ultimately into H2O and CO2. This work demonstrates that Cu–CeOx/TiO2 significantly lowers the energy demand of thermal remediation, offering a promising approach for low-carbon remediation of organic-contaminated soils.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510041
This study presents a full-scale engineering practice of retrofitting an idle upflow anaerobic sludge blanket (UASB) reactor into an aerobic granular sludge (AGS) system for treating low-strength municipal wastewater. The design capacity was 20,000 m3/d (maximum 24,000 m3/d), achieving separate treatment of industrial and domestic wastewater to reduce operational costs. Systematic analysis covered hydraulic capacity enhancement, effluent quality, pollutant removal efficiencies, sludge granulation progress, and operational costs. Results showed rapid start-up: the system reached 75% of design capacity by day 10 and 90% by day 26. During a 4-month operation, average removal efficiencies for COD, NH4+-N, TN, and SS were 83.2%, 97.0%, 75.9%, and 94.4%, respectively, even under low influent BOD5/TN ratios (typically below 4). Granulation progressed quickly: by day 44, average particle size was 2.6 times that of the inoculum and over 4 times that of flocs, with granules (>200 μm) accounting for 17.3%; by day 110, these values increased to 3.2 times and 5 times, with granule proportion reaching 33.4%. Compared to the previous year (June–August), the AGS process reduced electricity consumption, chemical consumption, and sludge production by 77.3%, 25.4%, and 30.4%, respectively, while saving 65.6% of footprint. This ten-thousand-ton case provides a practical basis for AGS technology application in China.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511020
With the increasing number of oil pipelines crossing rivers, the potential risks of oil leakage and surface spreading to river ecosystems and water environments are becoming more severe. Scenario-based simulation of oil spill diffusion is a prerequisite for effective interception point placement and leakage risk prevention. Numerous factors influence oil spill diffusion, including environmental conditions, river hydrology, and accessibility of emergency resources. This study integrates these factors and multiple dynamic processes to design eight typical scenarios for oil spill diffusion simulation, considering emergency resource locations, river hydrological regimes, and leakage modes. A case study is conducted on an oil pipeline crossing a river in northwest China. Results indicate that the diffusion distance and affected area are primarily controlled by water conditions and emergency resource accessibility. In emergency management, the efficiency of maintenance and repair resources during high-water months should be prioritized. Mechanistically, external forces such as hydraulic and wind forces have a greater influence on diffusion distance, surpassing internal forces like gravity, viscosity, and surface tension within a short time. For river crossings near emergency resources, internal force effects should be considered in oil spill diffusion simulations. When emergency resource arrival times are long, the diffusion distance based on Fay's theory is relatively small and can be neglected in engineering practice. This study provides a computational basis and methodological reference for risk assessment and emergency response to potential oil spills from pipelines crossing rivers, enhancing the scientific and effective nature of risk prevention and emergency handling.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511010
Complete catalytic oxidation of methane requires catalysts with high low-temperature activity, long-term thermal stability, and excellent water resistance for industrial application. This study constructed supported Pd-Ru/S-1 bimetallic catalysts using hydrophobic all-silica zeolite Silicalite-1 as support. Systematic catalytic performance tests evaluated methane oxidation activity, thermal stability, and water resistance, while multiple physicochemical characterizations revealed the reaction mechanism. Results showed that the catalyst with Pd/Ru ratio of 2:1 (2Pd-1Ru/S-1) exhibited optimal comprehensive performance, achieving T90 of 380 °C, maintaining 94% methane conversion at 375 °C for 48 h, and demonstrating excellent water resistance. Mechanistic studies indicated that PdO is the main active phase, and the reaction follows the Eley-Rideal (E-R) mechanism. The electronic synergy between Pd and Ru enhances the interaction between PdO and the support, effectively inhibiting sintering and water poisoning of active components. This study aims to provide a new strategy for industrial catalyst design to advance the industrialization of low-concentration methane catalytic technology, addressing its climate and pollution impacts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032403
An electrochemical sensor for lead ion (Pb2+) detection was developed based on a metal-organic framework (UiO-66-NH2) and conductive polymer polyaniline (PANI) composite. The UiO-66-NH2 was synthesized via hydrothermal method, and the UiO-66-NH2@PANI composite was prepared by in-situ polymerization. The composite was drop-coated onto a glassy carbon electrode (GCE) to fabricate the sensor. Material characterization was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). Electrochemical performance was evaluated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Key parameters including loading amount, enrichment time, and pH were optimized. Under optimal conditions, the sensor exhibited a linear response to Pb2+ in the concentration range of 10–200 μg·L−1 with a correlation coefficient (R2) of 0.9960, and a limit of detection (LOD) of 9.8 μg·L−1. The sensor demonstrated good anti-interference, repeatability, and stability. Practical applicability was assessed by spiked recovery tests in Yellow River water and tap water, yielding recovery rates of 94.1%–100.8% with relative standard deviations (RSD) ≤3.84%. Comparative analysis with inductively coupled plasma mass spectrometry (ICP-MS) showed comparable accuracy, confirming the sensor's potential for reliable Pb2+ monitoring in environmental samples.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031102
Laccases are promising biocatalysts for environmental remediation, yet their application is hindered by the instability and limited substrate affinity of wild-type enzymes. Here, we report a computational strategy integrating homology modeling, molecular docking, and virtual mutagenesis to engineer high-performance laccase mutants targeting benzene-containing pollutants. Structural analysis revealed that fungal laccase (Trametes versicolor, T.v) exhibited stronger binding affinities for aniline, o-phenylenediamine, and 1-hydroxybenzotriazole (HBT) compared to bacterial laccase (Bacillus subtilis, B.s), attributed to optimized hydrophobic and hydrogen-bond interactions within the substrate-binding pocket. Virtual mutagenesis identified critical residues (e.g., Ser113, Leu459) regulating substrate stability. Notably, mutations at Ser113 to Arg/Glu/Leu significantly enhanced binding energy (ΔG ≤ −7.1 kcal·mol−1 for HBT) by narrowing the pocket exit and reinforcing hydrophobic constraints. Mechanistically, polar mutations in the pocket interior promoted hydrogen bonding, while hydrophobic substitutions at peripheral residues restricted substrate dissociation. Our findings establish a dual-region engineering principle—enhancing hydrogen bonds internally and hydrophobicity externally—to optimize laccase activity. This work provides a generalizable framework for the rational design of oxidoreductases in pollutant degradation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202408057
Urban waterlogging, exacerbated by climate change and rapid urbanization, poses increasing risks, particularly in coastal low-lying areas with dense river networks. This study simulated waterlogging in the Shajing River drainage area of the Maozhou River basin, Shenzhen, using the SOBEK hydrodynamic model. Under a 5-year return period rainfall, 47 manholes overflowed and 31.29% of stormwater pipes operated at full capacity. Twelve waterlogging-prone points were identified: eight due to insufficient drainage capacity and five due to river backflow from low elevation. Two optimization schemes were compared: enlarging pipe diameters and implementing Low Impact Development (LID) measures. Pipe enlargement reduced overflowing manholes by 32 and full-flow pipe length by 20%, effectively decreasing surface ponding. LID measures reduced overflowing manholes by only 4 and full-flow pipe length by 1.5%, but decreased maximum flooding depth by nearly 1 m, alleviating drainage system burden. The study highlights the complex causes of coastal urban waterlogging, especially river backflow under tidal influence, and recommends considering sea-level rise and storm surge in drainage design. The findings provide valuable references for attributing waterlogging causes and planning drainage network upgrades in coastal cities.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022702
This study systematically investigated the occurrence and vertical distribution of per- and polyfluoroalkyl substances (PFAS) in solid waste, leachate, and surrounding groundwater at a municipal solid waste landfill in Fuyang City, Anhui Province, China. A total of 23 PFAS were detected in solid waste, with total concentrations (∑PFAS) ranging from 7.95 to 172.28 ng·g⁻¹. Trifluoroacetic acid (TFA), an ultrashort-chain PFAS, was ubiquitous, contributing on average 59% to the total PFAS mass. PFAS composition varied with depth: long-chain PFAS dominated in middle and upper layers, while short-chain and ultrashort-chain PFAS were more abundant in deeper layers, indicating enhanced downward migration of shorter-chain compounds. Sulfonic acid PFAS exhibited increasing relative abundance with depth. Leachate ∑PFAS concentration was 14.35 μg·L⁻¹, dominated by short-chain compounds such as PFPrS and PFBS, consistent with the composition in bottom-layer waste. Groundwater surrounding the landfill contained multiple PFAS, with concentrations decreasing with distance from the landfill, confirming the landfill as a source of PFAS to the surrounding environment. Multivariate analyses (PCoA and Bray–Curtis dissimilarity) revealed that some groundwater samples closely resembled leachate in PFAS composition, suggesting direct impact via leachate migration. These findings underscore the role of landfills as significant reservoirs and sources of PFAS, particularly ultrashort-chain compounds, and highlight the need for improved leachate management to mitigate groundwater contamination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4097-3
The on-demand patterning of two-dimensional transition metal dichalcogenides (TMDs) with tailored edges is critical for electronic and optoelectronic applications but remains technically challenging. Here, we report a stress-guided anisotropic etching strategy for producing large-area, well-ordered MoS2 nanostructures, including nano-ribbons and nano-squares, without templates. By applying uniaxial cumulative stress followed by selective thermal etching, MoS2 monolayers are statistically etched into ribbon-like structures whose width inversely correlates with applied stress magnitude. The newly etched edges are macroscopically straight or serrated, predominantly Mo-zigzag terminated, and enhance photoluminescence by a factor of ~8.0. The edge type depends on the angle between stress direction and crystallographic orientation, corroborated by theoretical calculations. Biaxial stressing generates well-defined nano-squares, offering a scalable, versatile patterning route for engineering 2D materials with tailored functional edges, promising for electrocatalytic and optoelectronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4013-y
Multicolor fluorescent polymer materials (MFPMs) are of significant value in biomaterials and display technologies due to their rich color palette. Traditional construction methods rely on incorporating multiple fluorescent molecules of different colors, which introduces complexities in structural design, synthesis, purification, and practical operability. To overcome these challenges, a strategy employing a single fluorophore that exhibits multiple fluorescent colors has been developed and integrated into MFPMs. This approach has advanced fields such as information anti-counterfeiting and optoelectronic materials. This review summarizes recent developments in MFPMs based on a single fluorescent molecule, elucidates preparation methods and color conversion mechanisms, and analyzes application prospects. Key mechanisms include aggregation-induced emission (AIE), excited-state intramolecular proton transfer (ESIPT), and twisted intramolecular charge transfer (TICT), which enable color tuning through environmental stimuli or assembly. The review highlights the potential of this strategy to simplify fabrication processes while achieving tunable emission colors. It provides guidance for designing novel multicolor fluorescent materials and fosters progress in fluorescent materials, polymer science, and materials science.