SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4502-1
Near-infrared-II (NIR-II, 1000-1700 nm) luminescent materials are pivotal for deep-tissue bioimaging and optical communication, yet their performance is often limited by low quantum yields and thermal quenching. Here, we report a thermal-enhanced NIR-II luminescence in Sb3+/Er3+ co-doped Cs3GdCl6 microcrystals synthesized via a modified Bridgman method. Under ultraviolet excitation, the co-doped microcrystals exhibit intense NIR-II emission centered at 1532 nm corresponding to Er3+: 4I13/2 → 4I15/2 transition, with a maximum relative sensitivity of 1.2% K−1 at 303 K. Notably, the integrated NIR-II emission intensity increases by 2.3-fold from 298 K to 373 K, demonstrating anomalous thermal enhancement. This behavior is attributed to the thermally activated energy transfer from Sb3+ sensitizers to Er3+ activators, as confirmed by temperature-dependent photoluminescence spectra and decay kinetics. The energy transfer efficiency reaches 86% at room temperature and further improves with rising temperature. The microcrystals also show excellent photostability, retaining 95% of initial intensity after 120 min continuous UV irradiation. Furthermore, we demonstrate a proof-of-concept wireless optical communication link using the microcrystals as a NIR-II phosphor, achieving a signal-to-noise ratio of 30 dB at 400 Hz modulation frequency. These findings provide a new strategy for designing thermal-enhanced NIR-II luminescent materials and expand their potential in temperature sensing and optical communication.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(25)61033-X
Carbon-based materials have gained significant attention in anticancer treatment due to their exceptional biocompatibility, yet critical challenges persist in establishing definitive correlations between their porous structures and functional performance. We report the use of a silica template to guide pore formation in the design of mesoporous carbon spheres (mC) with tailored pore structures for improved combined photothermal-chemotherapy. The mesopore size of mC was adjusted by kinetic control of resin polymerization and silica hydrolysis. Structural characterization showed that 4.4 nm mesopores enabled an exceptional gemcitabine loading of 228 mg g−1 and a sustained pH/thermal dual-responsive release with >70% drug release under near-infrared (NIR) irradiation. Finite element analysis demonstrated pore size-dependent heat transfer dynamics, with the improved mC achieving a superior photothermal conversion efficiency of 62% by a combination of N-doping and defect engineering. In vitro evaluations confirmed outstanding biocompatibility with >95% cell viability at 200 μg mL−1 and potent tumor suppression in pancreatic and biliary cancer models with an ~5% cell viability at 25 μg mL−1 where combined therapy showed a 3.7-fold increased cytotoxicity over monotherapy. The improved structure of mC facilitated cascade therapeutic effects with enhanced tumor permeability derived from NIR-triggered hyperthermia and prolonged therapeutic exposure due to pH-responsive drug release. This pore engineering strategy establishes a structure-function process for next-generation theranostic platforms, addressing the critical limitations of conventional pancreatic and biliary cancer therapies through spatiotemporal control of multimodal treatment.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2026.JFCT.0001
The escalating global demand for carbon reduction has positioned chemical absorption using alkanolamine solvents as the predominant post-combustion CO2 capture technology, owing to its high absorption efficiency and process maturity. However, the regeneration of CO2-rich solvents is energy-intensive, with the desorption step accounting for 40.0%–60.0% of total energy consumption. Traditional amine-based methods suffer from high energy penalties, solvent degradation, and equipment corrosion, limiting scalability. Catalytic CO2 desorption, employing solid acid catalysts (SACs), has emerged to address these challenges by lowering the activation energy for CO2 release, enhancing reaction kinetics, and enabling efficient regeneration at lower temperatures (110–130 °C reduced). This review systematically examines research from the past five years on key catalyst materials, focusing on structure-activity relationships, synergistic mechanisms of Lewis acid, Brønsted acid, and basic sites, and their influence on desorption pathways. It highlights that SACs not only improve desorption dynamics but also facilitate catalyst recovery, avoiding adverse effects on absorption. The paper analyzes current scientific and technological challenges, including catalyst stability, selectivity, and scale-up, and provides an outlook on industrial application in low-cost carbon capture. Key findings indicate that catalysts such as metal-organic frameworks (MOFs), heteropolyacids, and waste-derived materials can reduce regeneration energy by up to 30%–40% while maintaining high desorption efficiency. The review underscores the potential of catalytic regeneration to significantly lower operational costs and enhance the viability of amine-based CO2 capture in industrial settings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-3961-8
This correction addresses an inadvertent misplacement of Fig. 4b3 during figure reorganization in the original article published in Science China Materials, volume 65, issue 10, 2022, page 2850 (DOI: 10.1007/s40843-022-2024-6). The corrected Fig. 4b is presented herein. The authors confirm that this correction does not affect the results, conclusions, text, or figure caption of the original work. The correction was requested by the authors and received on 6 January 2026, accepted on 8 January 2026, and published online on 10 February 2026. The original study introduced flexible electrostatic hydrogels derived from marine organisms for nitric oxide-enhanced photodynamic therapy against multidrug-resistant bacterial infections. The correction ensures the accurate representation of experimental data, maintaining the integrity of the scientific record.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511020
With the increasing number of oil pipelines crossing rivers, the potential risks of oil leakage and surface spreading to river ecosystems and water environments are becoming more severe. Scenario-based simulation of oil spill diffusion is a prerequisite for effective interception point placement and leakage risk prevention. Numerous factors influence oil spill diffusion, including environmental conditions, river hydrology, and accessibility of emergency resources. This study integrates these factors and multiple dynamic processes to design eight typical scenarios for oil spill diffusion simulation, considering emergency resource locations, river hydrological regimes, and leakage modes. A case study is conducted on an oil pipeline crossing a river in northwest China. Results indicate that the diffusion distance and affected area are primarily controlled by water conditions and emergency resource accessibility. In emergency management, the efficiency of maintenance and repair resources during high-water months should be prioritized. Mechanistically, external forces such as hydraulic and wind forces have a greater influence on diffusion distance, surpassing internal forces like gravity, viscosity, and surface tension within a short time. For river crossings near emergency resources, internal force effects should be considered in oil spill diffusion simulations. When emergency resource arrival times are long, the diffusion distance based on Fay's theory is relatively small and can be neglected in engineering practice. This study provides a computational basis and methodological reference for risk assessment and emergency response to potential oil spills from pipelines crossing rivers, enhancing the scientific and effective nature of risk prevention and emergency handling.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511025
Under the national carbon peak and carbon neutrality goals, carbon reduction in municipal wastewater treatment plants (WWTPs) has been largely overlooked, yet accurate accounting is the first step toward mitigation. This study establishes a carbon emission accounting method for a municipal WWTP in Lanzhou, covering the operation and maintenance phase, to identify key emission sources and propose feasible reduction pathways. The results show that the total annual carbon emission in 2023 was 61,399.80 t CO2-eq, with an emission intensity of 0.71 kg CO2-eq per tonne of wastewater treated. Monthly emissions were relatively stable, with a coefficient of variation of 3.46%. Direct emissions accounted for 47.47% of the total, with N2O being the dominant contributor (61.89% of direct emissions), followed by CO2 (30.88%) and CH4 (7.23%). Indirect emissions accounted for 52.53%, dominated by electricity consumption (95.15% of indirect emissions). Pearson correlation analysis revealed that direct carbon emissions per tonne were significantly correlated with influent BOD5 concentration, influent TN concentration, BOD5 removal rate, and TN removal rate (P < 0.01). Sensitivity analysis identified sewer retention time, fossil carbon fraction in influent, and solids retention time as the most influential parameters, with sensitivity coefficients of 0.42, 0.35, and 0.28, respectively. Considering uncertainties in emission factors and monitoring errors, the 95% confidence interval for annual total emissions was 55,200–67,600 t CO2-eq, corresponding to an emission intensity of 0.64–0.79 kg CO2-eq per tonne. Recommendations focus on three synergistic reduction strategies: reducing source emissions, lowering energy consumption, and enhancing carbon compensation.