SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4505-9
Transition metal hydroxides are promising oxygen evolution reaction (OER) catalysts for alkaline water electrolysis. This study reports Ce-doped Co(OH)2 electrocatalysts synthesized via one-step electrodeposition, where the Ce3+/Ce4+ ratio is precisely controlled by deposition temperature. The optimized Ce-Co(OH)2 catalyst, obtained at 40°C, exhibits an overpotential of 236 mV at 10 mA cm-2 and maintains stability for 200 h. In an anion-exchange membrane water electrolyzer (AEMWE), the Ce-Co(OH)2 anode achieves a cell voltage of 2.04 V at 1 A cm-2 and operates for over 500 h at 500 mA cm-2. Mechanistic analysis reveals that Ce3+/Ce4+ dynamic electron buffering regulates surface reconstruction: during OER, electron transfer direction reverses (Ce → O → Co), with Ce donating electrons to Co sites to prevent over-oxidation and structural collapse. This work establishes a versatile strategy for balancing surface reconstruction and structural stability in Co-based OER catalysts, providing a foundation for designing high-performance, durable alkaline water oxidation electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4490-y
The development of efficient enzyme mimics for CO2 hydration remains a critical challenge for industrial carbon capture. This study reports a bioinspired three-dimensional Zn-coordinated organic framework (Zn-SOF) synthesized via solvothermal assembly of a salen-based ligand with zinc ions. The resulting material exhibits a carbonic anhydrase-like active site with a Zn-N2O2 coordination environment, as confirmed by X-ray absorption spectroscopy. The Zn-SOF demonstrates a CO2 hydration rate of 3.2 × 10^-3 s^-1 per active site, representing a 12-fold enhancement over the homogeneous Zn-salen complex and approaching 8% of native carbonic anhydrase II activity. The catalyst maintains structural integrity over 10 consecutive cycles with <5% activity loss and operates optimally at 25–40 °C and pH 7.4–9.0. Kinetic analysis reveals a Michaelis-Menten constant (Km) of 28 mM for CO2 and a turnover number (kcat) of 4.1 s^-1, outperforming benchmark Zn-based mimics. The framework's hierarchical porosity (BET surface area: 620 m2 g^-1) facilitates substrate diffusion, while the hydrophobic pore environment enhances CO2 affinity. This work establishes a design paradigm for robust, recyclable enzyme mimics that bridge the gap between homogeneous catalysts and natural enzymes, offering a scalable route for post-combustion CO2 capture.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4112-6
Radiostrontium remediation is crucial for ecological protection and sustainable development of nuclear energy. However, efficient removal of 90Sr from complex radioactive liquid waste, especially under acidic conditions, remains challenging due to material instability and intense proton competition. Herein, the rapid and highly selective capture of Sr2+ in neutral and even acidic solutions has been achieved by a layered potassium phosphatoantimonate KSbP2O8 with excellent radiation and thermal stability. Under neutral conditions, it possesses high maximum adsorption capacity (qmSr = 110.25 mg g−1), rapid adsorption kinetics (the removal rate (RSr) of 91.54% within 30 min), and excellent selectivity for Sr2+, and facile regeneration. Particularly, even under acidic conditions (pH 2.0), KSbP2O8 still maintains excellent Sr2+ removal capacity (qmSr = 79.38 mg g−1), fast kinetics, and high selectivity. A mechanism study by multiple characterizations reveals that the efficient Sr2+ removal of KSbP2O8 mainly stems from ion exchange between Sr2+ and interlayer K+ in KSbP2O8, which is attributed to the synergy between the Sb5+-induced Brønsted acidity and the high charge density of the anionic framework. This study demonstrates the exceptional capability of phosphatoantimonates to selectively capture Sr2+ under acidic conditions, highlighting the potential of phosphatoantimonates as effective scavengers for radiostrontium remediation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011804
Per- and polyfluoroalkyl carboxylic acids (PFCAs) are persistent organic pollutants whose isomers exhibit distinct environmental behaviors, bioaccumulation potentials, and toxic effects due to structural variations. Accurate identification of PFCA isomers is critical for risk assessment and pollution control, yet existing detection methods predominantly rely on standard references, posing challenges for precise analysis of isomers with subtle structural differences. Single-molecule electrochemical sensing via nanopores offers a standard-free approach by correlating molecular volume with current blockade, but its capability to distinguish PFCA isomers remained unverified. This study targeted three sets of PFCA isomers: 4,5,5-trifluoropent-4-enoic acid vs. 4,4,4-trifluoro-3-methylbut-2-enoic acid; 3,3,3-trifluoro-2-methylpropanoic acid vs. 4,4,4-trifluorobutanoic acid; and 2-(trifluoromethoxy)acetic acid, 3,3,3-trifluorolactic acid, and (2R)-3,3,3-trifluoro-2-hydroxypropanoic acid. By engineering nanopore interfaces (WT, R220N, R220Q Aerolysin) and extracting multi-dimensional characteristic parameters, the method achieved near 100% accuracy in identifying all seven isomers. Feature selection further enabled high classification accuracy with low data volumes, laying the foundation for rapid single-molecule detection of PFAS and other emerging contaminants.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510039
The shipping industry's carbon emissions have drawn increasing attention. This study quantifies the carbon footprint of ship supply chains across their life cycle to identify key emission stages and reduction potentials, promoting green transformation. Based on life-cycle theory and using process analysis, a carbon footprint assessment model was constructed covering raw material acquisition, construction and assembly, transportation and distribution, and scrapping and recycling. The model was applied to a case ship, followed by multi-scenario and sensitivity analyses. Results show that the transportation and distribution stage is the dominant source of positive emissions, accounting for 88.73% of the total, while the scrapping and recycling stage provides a carbon offset benefit of 6.77%. Among five emission reduction scenarios—low-carbon materials, green energy, green logistics, circular economy, and comprehensive low-carbon—the reduction efficiencies are 2.02%, 0.06%, 18.44%, 0.42%, and 20.95%, respectively, indicating that green logistics is the core pathway for decarbonizing ship supply chains. Under the green logistics scenario, optimizing the LNG carbon emission factor yields more significant reduction effects. This study provides a life-cycle perspective on the carbon footprint structure of ship supply chains, offering theoretical references for identifying key reduction links and optimizing low-carbon technology pathways.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512031
The overuse of antibiotics has led to residual amoxicillin (AMX) in aquatic environments, promoting the spread of antibiotic resistance genes (ARGs) and threatening ecological safety. In this study, magnetic iron-modified biochar (Fe-BC) was prepared from agricultural waste sugarcane bagasse via FeCl3·6H2O impregnation and oxygen-limited pyrolysis. The adsorption performance and mechanism of Fe-BC for AMX were systematically investigated. Under conditions of 25 °C, pH 6, and initial AMX concentration of 50 mg·L−1, the adsorption capacity reached 32.61 mg·g−1. Characterization of Fe-BC before and after adsorption, combined with adsorption kinetics, isotherms, and thermodynamic analyses, revealed that adsorption primarily relied on oxygen-containing functional groups. The mechanisms included pore filling, electrostatic interaction, hydrogen bonding, complexation, and π–π interaction. After six thermal regeneration cycles, the removal efficiency of AMX remained above 76%. The specific surface area of Fe-BC increased from 279.20 m2·g−1 to 481.42 m2·g−1, an enhancement of approximately 72.4%. These results provide a technical reference for the resource utilization of agricultural waste and cost-effective treatment of antibiotic-containing wastewater in rural decentralized areas.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.