SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4359-0
Organic solar cells (OSCs) require cathode interlayers (CILs) that combine high charge transport, defect passivation, and thickness insensitivity for scalable manufacturing. Here, we report the synthesis of a novel A-D-A-A'-type polymer, PDPP2F-NDI-N, via the green and efficient direct arylation polymerization (DArP) method. The multiple electron-deficient units in the backbone confer strong electron-withdrawing character, effective work function modulation, enhanced built-in potential, high crystallinity, and ordered molecular packing. PDPP2F-NDI-N exhibits a high electron mobility of 1.01 × 10⁻³ cm² V⁻¹ s⁻¹ and electrical conductivity of 3.13 × 10⁻³ S m⁻¹, facilitating efficient charge extraction and transport. Its interfacial modification capability suppresses interfacial defects and reduces non-radiative recombination losses. In ternary OSCs, PDPP2F-NDI-N achieves a high power conversion efficiency (PCE) of 20.44%, with outstanding thickness insensitivity retaining 92.8% of peak PCE at a 30 nm CIL thickness, and a T80 lifetime exceeding 1700 hours under photo-thermal aging. This work demonstrates that poly(A-D-A-alt-A') backbone design combined with DArP synthesis provides an effective strategy for developing high-performance, thickness-insensitive, and stable polymeric CILs, advancing efficient, stable, and scalable OSC applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3630-2
This study demonstrates a dual-interface engineering approach for performance enhancement in perovskite-silicon tandem solar cells. By applying ethylenediamine dihydroiodide (EDAI2) to simultaneously modify both top and bottom interfaces of wide-bandgap perovskite layers, we achieve synergistic defect suppression and charge transport optimization. Time-resolved photoluminescence characterization reveals extended carrier lifetimes and improved spatial homogeneity in dual-modified perovskite films. The optimized single-junction wide-bandgap (>1.66 eV) perovskite solar cells attain a champion efficiency of 22.75% with enhanced operational stability. Implemented in perovskite-silicon tandem configuration, the devices achieve over 31% power conversion efficiency, validating the effectiveness of organic ligand-mediated dual-interface engineering in regulating carrier dynamics and advancing perovskite-based tandem photovoltaics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025111002
Epidemiological studies have established a significant association between exposure to environmental pollutants (EP) and the risk of lung adenocarcinoma (LUAD). This study integrates network toxicology and multi-omics analysis to elucidate the EP-LUAD molecular regulatory network and identify key regulatory genes, thereby revealing novel mechanisms of environmental carcinogenesis. Transcriptomic data from GEO and TCGA databases yielded 4,971 and 4,488 disease-related targets, respectively. Integration of toxicology databases (TargetNet, Swiss Target Prediction, CTD, SEA) identified 24,860 potential targets for eight common pollutants (SO2, NO, CO, NO2, O3, benzene, toluene, and polycyclic aromatic hydrocarbons). Intersection of these datasets produced 1,536 EP-LUAD common target genes. Protein-protein interaction network analysis identified 247 core targets. Machine learning selected five key genes: AGER, CAV1, CD44, CEP55, and GNB3, which demonstrated robust diagnostic and prognostic efficacy. Their expression correlated with immune cell infiltration, including CD4+ memory T cells and macrophages. Single-cell RNA sequencing revealed epithelial cell-specific expression patterns. Molecular docking confirmed stable pollutant-target binding, with PAH showing highest affinity for CD44 (binding energy −9.32 kcal·mol−1) and GNB3 (−8.32 kcal·mol−1). These findings establish AGER, CAV1, CD44, CEP55, and GNB3 as core molecular mediators of pollution-related LUAD. The high-affinity binding of PAH to CD44 and GNB3 underscores its carcinogenic potential. This study constructs a multi-level regulatory network for EP-LUAD, revealing underlying molecular mechanisms and providing novel potential targets and theoretical basis for early warning and intervention.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508092
Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants with high environmental stability and bioaccumulation potential, posing risks to soil ecosystems and human health. To systematically map research hotspots and evolutionary trends, a bibliometric analysis was conducted on 1,459 publications from the Web of Science Core Collection and CNKI (1985–2025) using VOSviewer and Python. Keyword clustering identified four primary research themes: (1) transport and transformation of PFAS in soil, (2) bioaccumulation and toxic effects, (3) environmental fate and risk assessment of novel PFAS, and (4) remediation strategies for legacy PFAS. Temporal trend analysis using a trend factor (T) revealed a shift from early toxicological studies to policy-driven growth post-2006, with recent emphasis on remediation technologies, migration mechanisms, and bioconcentration. Future research priorities include understanding the fate of novel substitutes in complex media, developing green and sustainable remediation technologies, and establishing robust validation frameworks. The study provides a comprehensive knowledge map to guide scientific prevention and efficient governance of PFAS contamination.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60619-0
Under the context of global energy transition and carbon neutrality, controlling nitrogen oxide (NOx) emissions from biomass combustion is of great significance, and the development of high-efficiency low-temperature catalysts has become a current research focus. In this study, Nb was used to dope and modify the Mn7-Cu3/BCN catalyst to construct the Mn7-Cu3-Nbx/BCN system. The doping amount was optimized through selective catalytic reduction (SCR) activity tests. The reaction mechanism was explored by combining in situ DRIFTS and density functional theory (DFT) simulations. Experimental findings revealed that the catalyst doped with 0.05% Nb achieved the optimal performance, sustaining a NO conversion efficiency of ≥94% within the temperature window of 150−275 °C while demonstrating improved resistance to alkali metal K poisoning. Mechanistic analyses showed that at low temperatures, the catalyst facilitated the SCR reaction via both the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) pathways, with the synergistic interaction between multiple active sites driving the efficient conversion of NH3 and NO. DFT calculations further confirmed that both pathways had the characteristics of low reaction energy barriers and significant exothermicity, ensuring the high activity and feasibility of the low-temperature reaction. The findings provided foundational theoretical support for the design of Nb-doped Mn-Cu-supported catalysts and the exploration of the underlying working mechanisms.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3812-5
Anaerobic bacterial infections, prevalent in oxygen-deprived tissues, are recalcitrant to conventional antibiotics due to slow bacterial metabolism and the generation of nutrient-rich niches that foster polymicrobial biofilms. Propionibacterium acnes (P. acnes), a skin commensal, exemplifies this challenge, causing acne vulgaris and implant-associated infections, with rising antibiotic resistance. This study introduces an antimicrobial peptide (AMP), WRK (sequence: WRKFRRFKFRW-NH2), which induces endogenous reactive oxygen species (ROS) production in anaerobic bacteria, exploiting their inherent low ROS tolerance. WRK exhibited potent antibacterial activity, with a minimum inhibitory concentration (MIC) of 4 μg mL−1 against planktonic P. acnes and a minimum biofilm eradication concentration (MBEC) of 64 μg mL−1. To enable dermal delivery, WRK was encapsulated in layered dissolving microneedles (MNs), which demonstrated adequate mechanical strength for skin penetration. In a mouse back acne model, AMP MNs significantly reduced P. acnes infection and inflammation, outperforming commercial clindamycin gel. Histological analysis confirmed reduced inflammatory cell infiltration and tissue hyperplasia in the AMP MN group. This strategy offers a promising approach for treating anaerobic infections without promoting drug resistance, addressing a critical unmet need in clinical dermatology and implant surgery.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0031
The high-temperature behavior of biomass ash critically influences gasifier operational efficiency. This study investigates the differential high-temperature behaviors of corn straw ash (CSA) and wheat straw ash (WSA) using an intelligent ash fusion analyzer, high-temperature rotating viscometer, X-ray diffraction (XRD), SEM-EDS, and FactSage thermodynamic simulations. Both ashes contain high K2O (>30%) and exhibit flow temperatures below 1300 °C. Despite higher K2O and lower SiO2, CSA exhibits a higher flow temperature (1241 °C) than WSA, attributed to elevated CaO (10.39%) and MgO (7.33%) that promote formation of high-melting silicates (K2MgSiO4, K2Ca2Si2O7, CaSiO3). In contrast, WSA with lower CaO (4.92%) and MgO (2.82%) tends to form low-melting potassium silicates. At high temperatures, both slags are typical crystalline slags, with viscosity rising sharply below a critical temperature. For CSA, rapid nucleation and coarsening of silicate crystals (e.g., KAlSiO4 grain size increases from 20.5 nm at 1350 °C to 192.9 nm at 1050 °C) cause abrupt viscosity increase. For WSA, a high P2O5 content (10.05%) induces a 'chemical dilution effect', leading to persistent KAlSiO4 during cooling and elevated viscosity, especially at the final cooling stage. This study elucidates how ash chemical composition governs high-temperature phase equilibrium and non-equilibrium kinetics, thereby macroscopically affecting ash fusion and rheological behavior, providing a theoretical basis for deeper understanding of biomass ash high-temperature characteristics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3774-3
Lithium-air capacitor batteries (LACBs) integrate the rapid charge-discharge capability of supercapacitors into conventional lithium-oxygen batteries, significantly enhancing power density. However, their cycling stability remains unsatisfactory. In this study, we incorporated redox mediators (RMs) into an LACB featuring a dual-cathode configuration. This design facilitates sustained electron transfer between the electrode and Li2O2/Oxygen, thereby delaying RM deactivation caused by electrode passivation and improving overall electrochemical performance. The RM-enhanced battery achieved over 250 cycles at 2 mA cm−2 with a limited capacity of 0.5 mAh cm−2, while exhibiting a 0.54 V reduction in charging voltage at 0.1 mA cm−2 compared to the RM-free system. Furthermore, application of an aluminum foil sealing technique enabled a power density of 13.8 mW cm−2 at 6 mA cm−2, overcoming mass transport limitations inherent in open-cell configurations. We also investigated the influence of oxygen barrier films with varying barrier capabilities on LACB performance. Results indicate that films with superior oxygen resistance better maintain a clean capacitor electrode surface, thereby providing more stable electron supply to the RMs and enhancing rate capability and cycling performance. These findings underscore the potential of redox mediators in improving the performance and longevity of LACBs, offering a promising strategy for their future development.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511002
To treat large-air-volume, low-concentration volatile organic compounds (VOCs) containing tetrachloroethylene (PCE) generated from rubber-metal bonding, this study systematically investigated the adsorption-desorption behavior and interaction mechanisms of PCE, toluene, and methyl isobutyl ketone (MIBK) on granular activated carbon (GAC). Static adsorption experiments showed that PCE adsorption capacity reached 556.6 mg·g−1, while dynamic multi-component adsorption capacity was 179.6 mg·g−1. Kinetic analysis indicated that PCE adsorption was controlled by both intraparticle diffusion and external surface adsorption, whereas toluene and MIBK were primarily intraparticle diffusion-limited. During high-temperature nitrogen desorption, PCE underwent dechlorination, hydrogenation, and recombination, producing trichloroethylene, 1,2-dichloroethane, 1,2-dichloropropane, and HCl, with HCl accounting for 3.61% of the chlorine molar content in adsorbed PCE. After four adsorption-desorption cycles, the iodine value of GAC dropped below the industry standard of 600 mg·g−1; however, water washing and alkali immersion extended the cycle life to 8 and 9 cycles, respectively. The HCl generation pattern in co-adsorption systems was consistent with single-PCE systems. A regeneration process combining alkali immersion and water washing was proposed and integrated into an engineering strategy. Compared to conventional activated carbon adsorption coupled with RTO incineration, the proposed classification strategy reduced annual costs by 49.5×10⁴ CNY. This work provides a cost-effective and safe solution for Cl-VOCs treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4072-3
All-inorganic, hole-transport-material-free (HTM-free), carbon-based perovskite solar cells (C-PSCs) have attracted significant attention due to their exceptional stability and low cost. However, their performance and commercial potential are constrained by poor interfacial contact, insufficient crystallinity, and energy level misalignment. In this work, we address these challenges via a molecular engineering strategy by introducing tetrakis(4-ethynylphenyl)methane (TEPM) as a multifunctional additive. The alkynyl moiety (C≡C) in TEPM coordinates with Pb2+ ions in perovskite precursors, synergistically slowing crystallization kinetics to regulate crystal growth and passivate deep-level defects. Consequently, CsPbI3 films exhibit larger grain sizes, improved crystallinity, and lower defect densities. Devices modified with TEPM achieved a record power conversion efficiency (PCE) of 20.01% (certified 19.58%). Additionally, unencapsulated devices retained 87.6% of their initial efficiency after 1080 h under ambient conditions (25 °C, 30% relative humidity), and maintained 94.0% of their initial efficiency after 730 h of continuous AM 1.5G illumination in air. This work sets a new efficiency benchmark for inorganic HTM-free C-PSCs and provides a versatile molecular engineering strategy for developing high-performance, stable perovskite photovoltaics.