SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4441-7
Early detection of kidney injury remains difficult because routine clinical indicators often lag behind tissue damage. Here we report uNP-CH1055, an ultrasmall renal-clearable NIR-II fluorescent nanoprobe for non-invasive imaging of kidney injury in vivo. uNP-CH1055 formed stable nanoparticles with a hydrodynamic diameter of 3.3 nm, showed good photostability, enabled low-background imaging under a 1200 nm long-pass filter, and underwent rapid renal clearance after intravenous administration. It also exhibited favorable biocompatibility in both cellular and animal studies. In three mechanistically distinct models of renal injury, cisplatin-induced acute kidney injury, ischemia–reperfusion injury and unilateral ureteral obstruction, renal fluorescence increased with injury severity and closely paralleled biochemical and histological indicators, including blood urea nitrogen, serum creatinine, KIM-1 and TUNEL-based readouts. These results identify uNP-CH1055 as a renal-clearable NIR-II probe for early and quantitative assessment of kidney injury across different pathological settings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4448-y
Zero-dimensional (0D) hybrid metal halides are promising for optoelectronic displays, bioimaging, and anti-counterfeiting due to strong exciton localization and self-trapped exciton (STE) emission. However, low-toxicity, biocompatible zinc halides with blue emission remain scarce, hindered by structural isolation of [ZnBr4]2− tetrahedra, electron-phonon coupling, lattice distortion, and nonradiative relaxation. Here, we synthesize MPAZnBr4 (MPA = N-(3-aminopropyl) morpholine), a 0D zinc bromide halide. Single-crystal X-ray diffraction reveals a monoclinic P21/c space group with a = 6.65190 Å, b = 16.11210 Å, c = 13.79640 Å, β = 94.5700°, Z = 4, and a calculated density of 2.394 g/cm3. The isolated [ZnBr4]2− tetrahedra are hydrogen-bonded to MPA cations, with the shortest Br···Br contact of 4.76 Å indicating weak inter-cluster electronic coupling. Upon photoexcitation, MPAZnBr4 exhibits bright blue emission centered at 450 nm with a full width at half maximum of 135 nm. Wavelength-dependent emission mapping confirms a single radiative pathway, while temperature-dependent photoluminescence identifies triplet STE emission with a thermal quenching activation energy of 55 meV. The extensive hydrogen-bonding network imparts remarkable structural stability, showing negligible photoluminescence decay under prolonged excitation or storage. As a proof-of-concept, we demonstrate switchable and rewritable information encryption and decryption, enabling complex luminescent patterns. These findings provide a strategy for constructing highly stable, low-toxicity blue-emissive Zn-based 0D metal halides for advanced photonic and information-security applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3588-2
The rapid evolution of aerospace technology necessitates the development of multi-functional composites that combine light weight, mechanical robustness, thermal protection/insulation, and electromagnetic interference (EMI) shielding. C/SiC porous ceramic composites are promising for thermal protection in hypersonic vehicles. Here, we report a facile strategy to fabricate Cf/SiC composite polymer-derived ceramics (PDCs) via re-pyrolysis of high-energy ball-milled polycarbosilane-vinyltriethoxysilane-graphene oxide (PVG) with Cf/SiC(rGO)p blend interleaves. In-situ generated honeycomb-like cellular structures and non-directional channels reduce density and increase porosity. High-quality SiO2 joints, formed from Si-dangling bonds, strengthen interfacial bonding via a brazing effect, while in-situ SiOC nanowires (SiOCnws) create a hierarchically enhanced network, improving fracture toughness and crack resistance. Multi-scale interfacial/dipole polarization enhances EMI shielding. The optimized Cf(0.2)/SiC(rGO) composite exhibits low density (1.49 g cm−3), high fracture toughness (6.32 MPa m1/2), hardness (7.18 GPa), compressive strength (72.67 MPa), and EMI shielding effectiveness of 58.31 dB. It maintains structural stability under butane blowtorch ablation at ~1300 °C for 3600 s. Porous variants show thermal conductivity of 0.211 W m−1 K−1 with 69.74% porosity. These multi-functional composites are promising for thermal protection systems in aerospace applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3648-2
Transient energy storage devices represent an emerging class of biodegradable power systems that provide temporary energy for implantable medical electronics before safely degrading in vivo. From early transient primary batteries to contemporary rechargeable batteries integrated with wireless charging systems, these devices have evolved to enable stable prolonged power supply. Through rational transient design and structural engineering, they achieve desirable electrochemical performance, tunable degradation rates, and mechanical compatibility with soft, irregular, and dynamic biological tissues. This work provides a critical review of state-of-the-art transient energy storage devices, including transient primary batteries, transient secondary batteries, and transient supercapacitors, with emphasis on their electrodes, electrolytes, encapsulation materials, fabrication processes, and applications. We critically analyze material selection strategies, transient design principles, and architecture design for various transient batteries and capacitors. Finally, we discuss existing challenges and outline future directions to guide the clinical translation of biodegradable power solutions for biomedical implants.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604025
To meet the minute-level early-warning requirements for odor and multi-pollutant emissions at waste treatment facilities, this study proposed a multivariate short-term time-series prediction framework applicable to multi-tier scenarios covering source and boundary points (i.e., workshops and plant boundaries). Based on continuous online monitoring data with a 5-second resolution, a long short-term memory (LSTM) model using a sliding-window and recursive multi-step prediction strategy was constructed to jointly model odor concentration (OU) and pollutants including VOCs, NH3, H2S, and CH3SH (mg/m³). An evaluation protocol aligned with environmental supervision practice was established, incorporating mean absolute error (MAE), root mean square error (RMSE), goodness-of-fit (R²), skill scores (SS) relative to a persistence baseline, and threshold-based error stratification to characterize uncertainty during peak emission periods. The results showed that at workshop monitoring sites with relatively stable operating conditions, VOCs, NH3, H2S, and CH3SH exhibited a high goodness of fit and low prediction errors. In contrast, at boundary sites affected by plume arrival delays and diffusion-dilution non-stationarity, OU and VOCs displayed significantly amplified errors during peak episodes, and the skill score advantage over the baseline became unstable at certain sites. Stratified analysis consistently revealed that non-peak periods outperformed peak periods, indicating that event-driven fluctuations were the main sources of error. Accordingly, this study suggested incorporating exogenous variables such as wind speed and direction, ventilation and gate access control, and operational rhythms, along with peak-sensitive loss functions, into the model to enhance its capacity to characterize and provide early warnings for transient emission pulses. Overall, this study established a reusable methodological baseline and evaluation paradigm for minute-scale multi-pollutant prediction, providing quantitative support for the operational management and source-to-boundary coordinated control of waste treatment facilities.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4094-8
Deep-blue multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters with high efficiency, high color purity, and high brightness are critically important for next-generation OLED displays, yet remain challenging due to severe aggregation and host-guest interactions in the solid state. Herein, we report a core-encapsulating molecular design strategy in which bulky and non-conjugated peripheral groups are introduced to sterically encapsulate a blue-emitting MR core, thereby suppressing intermolecular π-π interactions without perturbing its intrinsic electronic structure. Two new emitters, DNa-BN and QNa-BN, featuring half-encapsulated and fully encapsulated MR-core architectures, respectively, were developed. Owing to its fully encapsulated structure, QNa-BN exhibits pronounced aggregation resistance at high doping concentrations, maintaining photoluminescence quantum yields exceeding 96%, radiative decay rate constants on the order of 10^8 s−1, and fast reverse intersystem crossing rates (~10^5 s−1). Consequently, sensitizer-free OLEDs based on QNa-BN deliver narrowband deep-blue emission at 458 nm with a full width at half maximum of 22 nm, CIE coordinates of (0.142, 0.085), a maximum external quantum efficiency (EQE_max) of 34.4%, and a maximum luminance exceeding 20,000 cd m−2. Furthermore, by adopting a hyperfluorescence architecture, the EQE_max is further boosted to 38.7% with significantly suppressed efficiency roll-off. This work demonstrates that steric encapsulation of the MR core provides an effective and general approach to achieving aggregation-resistant, high-efficiency, and high-brightness deep-blue MR-TADF emitters for OLED applications.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60618-9
Aromatic hydrocarbons, essential chemical feedstocks for fuels, synthetic fibers, and pharmaceuticals, are predominantly derived from petroleum refining. The catalytic conversion of lignin, a major lignocellulosic component, offers a renewable route to these chemicals. This review systematically examines the influence of pyrolysis methods, catalysts, and reaction conditions on the catalytic pyrolysis of lignin to aromatic hydrocarbons. Key parameters include catalyst acidity and pore structure, which govern selectivity and yield. Reaction temperature, catalyst-to-lignin ratio, and residence time critically affect product distribution. The review outlines catalytic mechanisms, such as deoxygenation, cracking, and aromatization, and highlights the role of zeolite catalysts, particularly HZSM-5, in enhancing monocyclic aromatic hydrocarbon yields. Metal modification (e.g., Fe, Ni, Ga) and pretreatment strategies (e.g., torrefaction) are discussed for improving efficiency. Challenges remain in catalyst deactivation due to coking and the complexity of lignin structure. Future research directions include developing robust catalysts, optimizing reactor designs, and integrating processes for industrial viability. This review provides theoretical and technological guidance for advancing lignin-to-aromatics conversion.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025120801
The interaction between microplastic-derived dissolved organic matter (PSDOM) and iron oxides in soil environments can modulate its photosensitization effects, yet the underlying mechanisms remain elusive. This study investigated the influence of hematite with distinct morphologies—flake-shaped (HNPs) and cubic (HNCs)—on the photosensitization of polystyrene-derived dissolved organic matter (PSDOM). Under 500 W mercury lamp irradiation, both hematite morphologies promoted PSDOM degradation, with HNCs exhibiting superior performance: total organic carbon (TOC) decreased from 18.4 mg·L−1 to 12.3 mg·L−1 within 90 min, compared to 13.3 mg·L−1 for HNPs. Three-dimensional fluorescence spectroscopy indicated that hematite alters the humification process, thereby modifying photosensitization. Electron paramagnetic resonance (EPR) spectroscopy identified the generation of singlet oxygen (1O2), hydroxyl radicals (·OH), and carbon-centered radicals (CH3C(=O)OO·). HNCs significantly enhanced 1O2 production, while HNPs favored ·OH generation; both inhibited CH3C(=O)OO· formation. Quantitative analysis via high-performance liquid chromatography revealed that the steady-state concentration of 1O2 was highest with HNCs, reaching 2.80 times that of the PSDOM control, whereas ·OH concentration peaked with HNPs at 1.98 times the control. Notably, the steady-state concentration of 1O2 was approximately three orders of magnitude higher than that of ·OH. These findings elucidate the morphology-dependent role of hematite in PSDOM photosensitization, providing mechanistic insights into the environmental fate of microplastic-derived organic matter in complex soil systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3963-5
Metal additive manufacturing (MAM) enables integrated one-piece fabrication of parts, high material utilization efficiency, and unparalleled design freedom. However, problems such as low production efficiency, difficulties in ensuring quality stability and defect control limit the large-scale industrial application of AM. In-situ active modulation for AM enables dynamic regulation of parts during the fabrication process, thereby enhancing the quality of the final fabricated parts without introducing extra processing steps. In-situ active regulation enables direct intervention during defect nucleation, providing better effectiveness than post-printing repairs while avoiding performance degradation risks associated with post-processing. Based on the difference of core factors directly affected during regulation, in-situ active regulation is categorized into the following. (1) Process and path parameter optimization, where regulation directly impacts manufacturing-related procedural rules. It is the simplest method of control and the preferred approach, with widespread attention focused on its effects on microstructure and mechanical properties. (2) Laser beam shaping, where regulation directly influences the energy carrier morphology. To address issues such as edge over-melting and localized energy deficiency caused by non-uniform energy distribution, laser beam shaping should be employed. (3) Additional physical field modulation achieved by superimposing supplementary physical fields. When optimal process and path parameters still fail to obtain the desired microstructure and mechanical properties, additional physical field control may be considered. Meanwhile, this work summarized the effects of different additional physical fields on the mechanical properties of various metallic base materials. The future trends of in-situ modulation in additive manufacturing are also discussed.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3873-7
The escalating demand for lightweight, multifunctional stealth materials in modern protective applications necessitates integrated solutions against electromagnetic interference (EMI), infrared (IR) detection, and incendiary threats. This study presents an innovative melamine foam (MF)-based composite featuring an asymmetric dual-nano conductive network, achieving absorption-dominated EMI shielding, IR stealth, and flame retardancy. Inspired by the Salisbury screen, the composite employs MF as an interlayer and flame-retardant thermoplastic polyurethane (TPU) nanofiber membrane as a substrate. The architecture comprises a carbon nanotubes (CNTs)-modified impedance matching nanofiber layer as the top absorber and a silver nanoparticles (AgNPs)-modified nanofiber layer as the highly conductive reflective bottom. Precise control of CNTs content and interlayer thickness enables tunable electromagnetic wave (EMW) absorption, yielding a low reflection coefficient of 0.03 and a high EMI shielding effectiveness of 79.23 dB at a total thickness of 4.40 mm. Even at 1.40 mm, effective absorption-dominated shielding is maintained. The performance remains stable under ultrasonic, compression, and bending tests, demonstrating high durability. The mechanism underlying absorption-dominated EMI shielding at reduced thickness, relying on destructive interference of EMWs enabled by the asymmetric dual-nano conductive network, is thoroughly elucidated. Additionally, the composite exhibits superior IR stealth and self-extinguishing properties. This work offers a feasible strategy for designing high-performance stealth materials with strong potential for personnel and communication equipment protection.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510060
Wastewater treatment plant (WWTP) effluent is a significant pathway for emerging contaminants (ECs) to enter natural water bodies. This study investigated the removal of ECs by two field-scale gravel-based constructed wetlands: a horizontal subsurface flow constructed wetland (QL-CW) and a surface flow constructed wetland (BL-CW), both treating actual WWTP effluent. The influence of operation mode and wetland plant type on EC removal was examined. Using liquid chromatography-mass spectrometry, principal component analysis, and ecological risk assessment, the removal efficiencies and mechanisms for various ECs were explored. In QL-CW, biodegradation was more pronounced, particularly via ammonia-oxidizing bacteria co-metabolism, favoring ECs with benzyl, secondary amine, secondary amide, tertiary amide, halogenated, and carboxyl functional groups. In BL-CW, electrostatic attraction and hydrophobic interactions were more significant, with plant and root-microorganism uptake and adsorption playing key roles. Surface flow mode achieved significantly higher removal of antibiotics (45.3% vs. 34.1%) compared to horizontal subsurface flow, while no significant differences were observed for non-antibiotic pharmaceuticals (66.6% vs. 64.4%) and pesticides (49.8% vs. 34.2%). Planting Cyperus alternifolius (windmill grass) was more beneficial for antibiotic removal (43.6% vs. 30.1%) than planting Ipomoea aquatica (water spinach). The wetlands effectively reduced the ecological risks of most ECs to marginal levels. This study provides insights into the deep treatment of ECs in WWTP effluent by constructed wetlands.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040102
Calcium peroxide (CaO2) with a rich porous structure was synthesized via chemical precipitation for efficient fluoride removal from aqueous solutions. The adsorbent was characterized by SEM, BET, LPSA, and XRD, revealing a mesoporous material with a total pore volume of 0.51 cm3·g−1. Batch experiments investigated the effects of adsorbent dosage, initial fluoride concentration, reaction time, pH, and coexisting anions. Adsorption kinetics followed a fractal-like pseudo-first-order model, with intraparticle diffusion as the rate-limiting step. Equilibrium data were well described by the Sips isotherm, predicting a maximum adsorption capacity of 479.8 mg·g−1. Site energy distribution analysis indicated a normal distribution with an average energy of 13.36 kJ·mol−1. Mechanistic studies using FTIR and XPS revealed that fluoride removal proceeds via surface precipitation, ligand exchange, and electrostatic attraction. The high density of active sites contributes to the exceptional defluoridation performance, positioning CaO2 as a promising adsorbent for fluoride-contaminated water treatment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511011
The high cost of catalysts is a critical barrier to the upgrading and cost reduction of catalytic ozonation technology. This study developed a low-cost, long-life Fe–Mn-based ozone catalyst (FMG) derived from solid wastes (red mud and blast-furnace slag), leveraging iron and manganese components to construct dual active centers. A continuous manufacturing process was achieved by integrating alkali-activated cementitious reactions with disc pelletization via a cascade spray-coating and multi-stage curing technique. Under optimal conditions (ozone dosage 3.5 mg·L−1), the catalyst achieved 81.81% total organic carbon (TOC) removal of phenol solution within 60 min, retaining 87.27% of its initial activity after 15 reuse cycles. Long-term continuous-flow tests over 60 days demonstrated stable TOC removal between 69.44% and 75.46%. The production cost of FMG was 1,351.44 CNY·t−1, and the unit TOC removal cost was only 0.06 CNY·(g TOC)−1, representing a 78.69%–86.85% reduction compared to commercial catalysts (0.30–0.48 CNY·(g TOC)−1). This work provides a theoretical and technical foundation for cost-effective catalytic ozonation and high-value conversion of bulk solid wastes.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026022402
Graphene oxide–silver nanoparticle (GO-AgNPs) nanocomposites synergistically combine the high specific surface area and biocompatibility of graphene oxide with the potent antibacterial and optical properties of silver nanoparticles. This review systematically examines current synthetic strategies—physical, chemical, and biological—and their influence on nanocomposite morphology, loading efficiency, and stability. The biomedical applications of GO-AgNPs are critically analyzed, focusing on antimicrobial activity, anticancer therapy, drug delivery, and biosensing. Mechanistic insights reveal that antimicrobial action involves membrane disruption, oxidative stress, and damage to biomolecules, while anticancer effects are mediated through reactive oxygen species (ROS) generation. The review also addresses challenges such as AgNP aggregation and stability, which are mitigated by GO support. Future directions emphasize the development of multifunctional nanomedicine platforms, with a need for standardized toxicity assessments and scalable synthesis. This comprehensive overview aims to guide further research and clinical translation of GO-AgNPs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4030-y
In the era of artificial intelligence, efficient perception and processing of massive visual information demand advanced machine vision systems. Inspired by human visual adaptation, various optoelectronic devices have been developed, yet most rely on external gate voltages or complex circuits for dynamic sensitivity modulation. This work demonstrates an all-optically controlled biomimetic sensor based on a one-dimensional ZnO/MAPbBr3 heterojunction, achieving both positive and negative photoconductivity effects. By modulating oxygen vacancy states with ultraviolet light, the competition between intrinsic photoconduction and trap-mediated carrier capture is regulated, enabling dynamic control of visible-light photoresponse within a single device. This tunable behavior mimics scotopic adaptation (photopigment regeneration under weak illumination), photopic adaptation (photopigment bleaching in bright environments), and eyelid-like self-protection against intense light. The device operates without external gate bias or cascaded circuits, offering a promising strategy for next-generation intelligent biomimetic sensors in machine vision.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60692-5
Long persistent luminescence materials (LPLMs) have demonstrated significant potential in photo- and electro-catalysis due to their unique capability of storing and controllably releasing photogenerated charge carriers. These materials offer innovative solutions for environmental remediation and sustainable energy technologies. This review systematically summarizes recent advances in the application of LPLs in photo- and electro-catalysis, outlining their developmental history and underlying mechanisms. Emphasis is placed on their applications in organic pollutant degradation, photocatalytic hydrogen evolution, and photovoltaic cells. Furthermore, design strategies and research frameworks for LPLs are discussed. The current limitations and challenges in this field are examined, and future research directions are proposed to facilitate the transition of LPLMs from fundamental research to practical applications in energy and the environment. Key materials such as SrAl2O4:Eu2+,Dy3+ exhibit afterglow lasting up to 30 hours, enabling round-the-clock catalytic activity. Composite systems like g-C3N4@Au@SrAl2O4:Eu2+,Dy3+ and Cu|CuO/SrAl2O4:Eu2+,Dy3+ have achieved efficient degradation and simultaneous hydrogen evolution. Z-scheme heterojunctions, e.g., Sr2MgSi2O7:Eu2+,Dy3+/Ag3PO4, demonstrate enhanced performance. The review highlights the potential of LPLMs to overcome the limitation of intermittent light sources, providing a pathway for continuous catalytic processes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4024-1
Sonodynamic therapy (SDT) faces limited efficacy due to robust antioxidant systems in tumors that scavenge reactive oxygen species (ROS). To overcome this, we developed a pH/ultrasound-responsive theranostic nanoplatform, Mn-CaCO3@NGQDs/PAA, via self-assembly of nitrogen-doped graphene quantum dots (NGQDs), Mn-doped CaCO3, and polyacrylic acid (PAA). This platform synergistically combines SDT with calcium overload. Under ultrasound irradiation, it generates abundant singlet oxygen (1O2), while the acidic tumor microenvironment triggers sustained Ca2+ release, inducing calcium overload. The combined effects amplify oxidative stress, suppressing tumor growth. Additionally, the nanoplatform exhibits dual-mode T1/T2-weighted magnetic resonance imaging (MRI) performance, enabling tumor localization. In vivo studies demonstrated significant tumor inhibition and apoptosis, with no notable toxicity. This integrated strategy maximizes therapeutic efficacy, offering a promising approach for enhanced tumor therapy.