SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4279-0
Inkjet printing has emerged as a viable additive manufacturing route for organic light-emitting diodes (OLEDs), offering drop-on-demand patterning, high material utilization, and compatibility with large-area flexible substrates. This review critically examines the formulation science, printhead physics, and drying kinetics that govern the quality of inkjet-printed organic layers. We analyze the rheological window required for stable jetting, typically 1–20 mPa·s viscosity and 25–45 mN/m surface tension, and the dimensionless Ohnesorge number (0.1 < Z < 1) that defines satellite-free droplet formation. The coffee-ring effect, driven by capillary flow and solvent evaporation gradients, remains the dominant failure mode for pixel non-uniformity; binary solvent systems and substrate temperature control (40–60 °C) mitigate this. We survey recent progress in printed hole-transport, emissive, and electron-transport layers, with particular attention to cross-linkable hole-transport materials that resist interlayer dissolution. Device performance metrics from printed OLEDs now reach external quantum efficiencies of 15–20% for fluorescent emitters and >25% for phosphorescent systems, with operating lifetimes (T95) exceeding 1,000 hours at 1,000 cd/m². We identify remaining bottlenecks: nozzle clogging from aggregated nanoparticles, film thickness variation across large panels, and the absence of standardized ink formulations. The review concludes with a roadmap for industrial adoption, emphasizing in-line metrology and closed-loop process control as prerequisites for yield parity with vacuum-deposited OLEDs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4200-0
Self-powered broadband photodetectors are pivotal for next-generation intelligent healthcare. Solution-processed mercury sulfide (HgS) is an attractive near-infrared absorber but is limited by interfacial instability, high defects, and sluggish response. Inspired by sulfur-mediated adhesion in Alhagi sparsifolia, a bioinspired interfacial engineering strategy employs an antimony sulfide (Sb2S3) interlayer to construct a bidirectional chemical bonding network. The Sb2S3 interlayer simultaneously forms Sb–O bonds with fluorine-doped tin oxide (FTO) substrates and Sb–S/Hg–S bonds with the HgS layer, thereby reinforcing interfacial adhesion, passivating coordination-unsaturated defect states, and establishing a type-II heterojunction with a strong built-in electric field. The resulting Sb2S3/HgS photodetector exhibits self-powered operation, broadband sensitivity spanning the visible to near-infrared region (642–1550 nm), an ultrafast response time of 2.47 ms, a detectivity up to 1.7 × 10^11 Jones, and retaining nearly constant photocurrent over 5000 continuous on-off switching cycles as well as prolonged air exposure. Beyond device-level performance, we demonstrate its utility in intelligent healthcare scenarios, including machine-learning-assisted liquid drug identification, binary-coded optical wireless communication, and high-fidelity photoplethysmography monitoring. This work establishes biomimetic bidirectional bonding as a generalizable paradigm for stabilizing solution-processed chalcogenide optoelectronics and accelerates the integration of self-powered broadband photodetectors into intelligent healthcare systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3689-9
Converting body heat into electricity presents an appealing route for sustainably powering wearable electronics; however, conventional thermoelectric materials face significant drawbacks, including high ionic concentrations, toxicity, and limited thermoelectric efficiency. Here, we report an ionic thermoelectric hydrogel designed through precise supramolecular chemistry, utilizing dual molecular interactions: host-guest complexation of α-cyclodextrin (α-CD) with I3− ions and hydrogen bonding between polyvinyl alcohol (PVA) polymer chains and I3−. This molecularly tailored approach markedly amplifies thermoelectric performance, achieving a high thermopower of 2.21 mV/K and a tenfold enhancement in peak power output at an exceptionally low iodine concentration (10 mmol/L I− + 2.5 mmol/L I3−). The hydrogel maintains excellent biocompatibility and mechanical robustness, suitable for direct skin contact. Demonstrated applications include flexible thermoelectric devices generating nearly 100 mV from body heat and sensor arrays capable of motion and spatial temperature sensing. These results underscore the substantial potential of supramolecularly designed ionic thermoelectric hydrogels for wearable energy harvesting, personalized healthcare monitoring, and advanced human-computer interfaces.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3882-y
Organic semiconductor crystals with well-defined morphologies are highly desirable for high-performance optoelectronic devices, yet precise control over their growth remains a challenge. Here, a novel donor-acceptor (D-A) molecule, TQDPT, has been successfully developed, featuring a rigid π-conjugated acceptor core composed of thiazoloquinoxaline and naphthalene, coupled with phenylphenothiazine donors. This study presents a temperature-mediated crystallization strategy for precisely controlling the morphology and carrier transport properties of TQDPT single crystals. By systematically investigating the growth kinetics across a controlled temperature range (15–35°C), we reveal a distinct transition from needle-like structures to plate-like crystals, with tunable average widths spanning from around 2.8 to 30.1 μm. This morphological evolution is driven by temperature-dependent molecular diffusion and nucleation kinetics. Significantly, the plate-like crystals grown at 25°C exhibit an order-of-magnitude enhancement in mobility compared to needle-like counterparts, while higher temperatures of 35°C yield broader crystals with improved carrier mobility and device stability. This work highlights the critical role of temperature as a pivotal parameter in the dimensional and electronic optimization of organic crystals, offering an attractive approach to optimize functional materials for advanced optoelectronics.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509086
Groundwater contamination by nitrate and antibiotics has become a global concern. This study evaluated the continuous performance of permeable reactive barrier (PRB) columns packed with zero-valent iron (ZVI) and pyrite (FeS2) combined with denitrifying microorganisms (ZFM) for simultaneous removal of nitrate and ofloxacin (OFL). Control columns included soil (S), microorganisms (M), and ZVI/FeS2 (ZF). Over 30 days of continuous operation, the ZFM column achieved average removal efficiencies of 88% for nitrate and 78% for OFL, significantly higher than controls. The ZFM system maintained higher active iron concentration (0.68 mg·L−1) compared to ZF (0.48 mg·L−1), mitigated pH increase, and sustained lower oxidation-reduction potential (ORP), favoring stable performance. XRD and XPS analyses revealed that microbial involvement promoted FeS formation (2θ=30.1°) and reduced ZVI passivation, extending material lifespan. High-throughput sequencing showed that while overall microbial diversity remained stable, key functional populations including norank_f_Fermentibacteraceae, norank_f_Anaerolineaceae, Longilinea, and Anaerolinea increased in abundance by 2.93%, 0.55%, 1.53%, and 0.62%, respectively, enhancing nitrate and OFL removal. These findings demonstrate that integrating microorganisms with ZVI/FeS2 in PRB systems offers a promising approach for remediating combined nitrate and antibiotic contamination in groundwater.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3858-8
High-quality β-Ga2O3 membranes are pivotal for fabricating high-performance memristive devices. Here, vertical Ag/β-Ga2O3/Pt memristors built on high-crystalline-quality β-Ga2O3 membranes via lattice epitaxy engineering and a sacrificial-layer-assisted exfoliation strategy are reported. The resulting β-Ga2O3-based device demonstrates a high ON/OFF ratio exceeding 10^8, low SET/RESET voltages of 0.13 V/−0.11 V, low programming current of 10^-10 A, stable data retention beyond 4 × 10^4 s, and excellent subthreshold characteristics of ~0.47 mV/dec. Adjustable compliance current enables the coexistence of volatile and non-volatile switching modes. Additionally, the resistive switching versatility is predominantly governed by the migration of Ag ions, as supported by electrical characterizations and first-principles calculations. Furthermore, a β-Ga2O3 memristor-based circuit that functions as a reconfigurable and non-volatile exclusive OR (XOR) logic gate has been designed and simulated, enabling both image encryption/decryption and edge detection. This work not only demonstrates lattice-engineered, high-quality β-Ga2O3 membranes for fabricating advanced memristors but also extends their applicability to digital logic and reconfigurable image processing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3790-5
Near-infrared (NIR) phosphors with high quantum efficiency (QE) and thermal robustness are critical for phosphor-converted light-emitting diodes (pc-LEDs). Here, a Cr3+-activated Lu2BaAl4SiO12 (LBASO) garnet phosphor is engineered via chemical unit cosubstitution of [Ba2+-Si4+] for [Lu3+-Al3+] in Lu3Al5O12 (LuAG), inducing a strong crystal field that yields NIR emission at 705 nm. The optimized LBASO:0.07Cr3+ exhibits an internal quantum efficiency (IQE) of 84.82% and external quantum efficiency (EQE) of 46.02%. Notably, it demonstrates anti-thermal quenching (ATQ) with 126.03% of its initial intensity at 498 K under 442 nm excitation, attributed to a wide band gap, weak electron-phonon coupling, defect trap energy levels, high structural rigidity, and optimized electron population distribution. A NIR pc-LED fabricated with this phosphor achieves an output power of 134.99 mW and photoelectric conversion efficiency of 11.4% at 100 mA drive current. These results underscore the potential of LBASO:Cr3+ for applications in plant lighting, night vision, and nondestructive analysis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3869-7
Iontronic capacitive pressure sensors (ICPSs) are pivotal for wearable technology, yet their performance is constrained by an inherent trade-off between sensitivity and detection range. Here, we introduce a micro-electric double layer (micro-EDL) engineering strategy to overcome this limitation. This is realized through a nanocomposite dielectric where multi-walled carbon nanotubes (MWCNTs) form a percolated network, generating a dense array of pressure-responsive nano-capacitors. Synergistically integrating a hierarchical MoS2/NiCo-LDH electrode provides abundant pseudocapacitive interfaces. The resulting sensor exhibits an ultrahigh sensitivity of 67,095 kPa−1 at 1 kHz, a broad detection range up to 1.3 MPa, rapid response and recovery times of 4 ms and 5 ms, respectively, and outstanding durability exceeding 18,000 cycles. Practical validation demonstrates 100% classification accuracy in recognizing complex gestures and gait patterns, underscoring its real-world applicability. These findings establish micro-EDL engineering as a promising route for advancing next-generation iontronic devices, offering insights into their electrochemical mechanisms.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3901-2
This work presents a cracked template and vacuum metal evaporation strategy for fabricating structurally randomized copper (Cu) mesh films. Regulating the internal stress distribution within the coating during template cracking enables controlled fabrication of Cu mesh films with varying discrete degrees of mesh aperture area and distinct probability distributions of metal line inclination. The influence of structural parameter randomization on properties was systematically investigated, encompassing higher-order diffraction energy homogenization, optoelectronic performance, and electromagnetic interference shielding effectiveness (EMI SE). Results demonstrate that increasing structural randomization effectively suppresses higher-order diffraction energy, achieving a reduction to −3.93 dB in normalized higher-order diffraction energy. Furthermore, the Cu mesh film exhibited minimal degradation on imaging system performance, with resolution decreasing only marginally from 80.6 to 71.8 lp/mm. Simultaneously, the most randomized Cu mesh film demonstrates an ultra-low sheet resistance (3.31 Ω/sq), high visible light transmittance (88.7% at 550 nm), an exceptional figure of merit (FoM=913.69), and robust EMI SE within the X-band (average SE of 33.18 dB). These findings underscore that metal mesh films incorporating structural randomization offer an effective strategy for enhancing EMI shielding in high-performance optoelectronic imaging systems.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025051802
This study investigates the recovery of nitrogen and phosphorus from anaerobic digestion biogas slurry of chicken manure via magnesium-modified zeolite coupled with electrochemical precipitation crystallization. Three types of magnesium-modified zeolites were prepared using alkali activation and magnesium loading to enhance adsorption capacity. A coupled 'magnesium-modified zeolite-electrochemical MAP' reactor was constructed, and key parameters (N/P ratio, pH, current density) were optimized via response surface methodology. The results show that MgCl2-modified zeolite (MgCl2-ZO) exhibited the best coupling precipitation performance. Under optimal conditions (N/P ratio 3.78, pH 8.43, current density 13.11 A·m−2), the removal efficiencies for total nitrogen (TN), total ammonium nitrogen (TAN), total phosphorus (TP), and total phosphate (TPS) reached 54.84%, 62.93%, 82.02%, and 77.72%, respectively. The mechanism involves synergistic adsorption and electrochemical release of Mg2+ from the magnesium electrode, which promotes struvite crystallization. The electrochemical field enhances ion exchange and chemical precipitation on the zeolite surface, facilitating efficient nutrient recovery. This approach offers a promising solution for nutrient management in livestock wastewater.