SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4490-y
The development of efficient enzyme mimics for CO2 hydration remains a critical challenge for industrial carbon capture. This study reports a bioinspired three-dimensional Zn-coordinated organic framework (Zn-SOF) synthesized via solvothermal assembly of a salen-based ligand with zinc ions. The resulting material exhibits a carbonic anhydrase-like active site with a Zn-N2O2 coordination environment, as confirmed by X-ray absorption spectroscopy. The Zn-SOF demonstrates a CO2 hydration rate of 3.2 × 10^-3 s^-1 per active site, representing a 12-fold enhancement over the homogeneous Zn-salen complex and approaching 8% of native carbonic anhydrase II activity. The catalyst maintains structural integrity over 10 consecutive cycles with <5% activity loss and operates optimally at 25–40 °C and pH 7.4–9.0. Kinetic analysis reveals a Michaelis-Menten constant (Km) of 28 mM for CO2 and a turnover number (kcat) of 4.1 s^-1, outperforming benchmark Zn-based mimics. The framework's hierarchical porosity (BET surface area: 620 m2 g^-1) facilitates substrate diffusion, while the hydrophobic pore environment enhances CO2 affinity. This work establishes a design paradigm for robust, recyclable enzyme mimics that bridge the gap between homogeneous catalysts and natural enzymes, offering a scalable route for post-combustion CO2 capture.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4183-3
Excessive ultraviolet (UV) radiation poses significant risks to human health, necessitating highly sensitive detection systems. Organic photodetectors (OPDs) offer high sensitivity and tunable spectral response, but their UV performance is constrained by conventional glass/indium tin oxide (ITO) substrates and electrodes, and insufficient photoactive layer responsivity. Here, we report high-performance UV-OPDs achieved through UV-transparent window and active-layer optimization. Replacing glass/ITO with a UV-transparent window comprising a quartz substrate and PH1000 electrode enhances UV transmittance. Integrating the high UV-responsive blend PM6:Y6:PC71BM as the active layer, the optimal ternary UV-OPD exhibits external quantum efficiency (EQE) exceeding 53% across 280–400 nm, with a peak EQE of 78.29% and responsivity of 214.68 mA/W at 340 nm, alongside a rapid response time of 2.6/2.1 μs. This performance represents the best combination of responsivity and response time reported to date in the UV region. We demonstrate the potential of these UV-OPDs for outdoor real-time UV monitoring. This work presents a promising strategy for developing high-performance UV-OPDs through transparent substrate and electrode engineering, and active-layer optimization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3838-5
Air-permeable and ultrathin conductive electrodes are essential for next-generation soft electronics, including breathable wearables, on-skin devices, and bio-integrated electronics. However, conventional metallization strategies, such as sputtering and ink-printing, often suffer from severe vertical charge leakage due to the porous and ultrathin characteristics of nanofibrous networks, leading to device short-circuiting, operational failure, and limited vertical integration. Here, we present a solvent-selective dissolution-assisted transfer printing strategy to achieve surface-confined metallization of ultrathin, lightweight, and gas-permeable nanofibrous networks, enabling lateral conductivity while maintaining vertical insulation. This transfer printing process facilitates not only the rapid formation of conductive patterns on the surface of nanofibrous networks but also mechanical reinforcement through solvent evaporation-induced interlocked fiber-fiber welding. Meanwhile, the strategy preserves the high permeability of the nanofibrous networks and imparts a unique combination of surface conductivity (2 Ω cm) and vertical insulativity (10^11 Ω cm). The resulting anisotropic conductive networks enable low-voltage wearable heaters, high-sensitive pressure sensors, and ultralight temperature sensors. A pressure-temperature dual-modal sensing patch is further fabricated for intelligent grasping classification. The proposed surface-confined metallization strategy enables rapid fabrication of an anisotropic conductive network as a building block to construct air-permeable, ultrathin, and lightweight wearable electronics.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024102403
The rapid combustion of soot at low temperatures is critical for diesel engine cold-start emission control. This study investigates the effects of water vapor (H2O) and nitrogen oxides (NOx) on electricity-pulse-sparked catalysis (EPSC) for soot combustion over a ceramic filter paper-based potassium-supported antimony-doped tin oxide (K/ATO/CP) monolithic catalyst. Under EPSC with 2000 J pulses, the presence of H2O and NOx adversely affected soot combustion performance, yet average reaction rates remained high at 12.0 μmol·gcat−1·s−1 and 9.53 μmol·gcat−1·s−1, respectively, exceeding conventional thermal catalysis (<8 μmol·gcat−1·s−1). In situ Raman and concentration profiles revealed that electricity pulses promote rapid H2O desorption, effectively alleviating H2O poisoning and restoring catalyst activity. In contrast, NOx adsorption forms stable nitrates (e.g., KNO3) that desorb slower than the soot combustion process, leading to incomplete recovery of activity. These findings highlight the importance of adsorbate desorption kinetics in EPSC and suggest that using weakly basic alkaline-earth metals (e.g., Mg, Ca, Sr) with lower nitrate decomposition temperatures could mitigate NOx poisoning. The results provide guidance for advancing EPSC technology in hybrid vehicle exhaust aftertreatment systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3407-0
Grain boundary (GB) engineering has emerged as a promising strategy to enhance the near-room-temperature performance of Mg3(Sb,Bi)2-based thermoelectric materials, yet effective control of Mg distribution at GBs remains a significant challenge. Here, we report a novel approach to achieve targeted Mg segregation at GBs through strategic Ag incorporation in Mg3.3Sb0.5Bi1.497Te0.003. Through comprehensive microstructural characterization and first-principles calculations, we demonstrate that Ag preferentially segregates at GBs, forming Mg-rich MgAg alloy phases while maintaining limited solid solubility within the matrix. This unique GB architecture simultaneously optimizes multiple thermoelectric parameters: the Mg-rich GB regions significantly provide efficient carrier transport channels and enhance carrier mobility, while the MgAg phases and lattice disorders effectively scatter phonons without disrupting electron transport. Consequently, the optimized composition (x = 0.01) exhibits a remarkable enhancement in power factor at 300 K and maintains an average ZT of ~1.0 across 300–400 K. The material also demonstrates excellent mechanical properties and thermal stability, making it particularly suitable for near-room-temperature applications. Our findings not only establish an effective strategy for GB engineering in Mg3(Sb,Bi)2 systems but also provide valuable insights into the rational design of high-performance thermoelectric materials through interface modification.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3928-4
Circularly polarized afterglow (CPA) materials provide an advanced optical signature to light emission, offering great potential for advanced photonic technologies. However, practical implementation remains challenging due to the lack of satisfactory performance, that is, high luminescence dissymmetry factor (g_CPA), long visualization time, and good processability. Here, we develop processable, full-color CPA materials composed of cholesteric liquid crystal polymers (CLCPs) and inorganic phosphors embedded in polymers, achieving a high g_CPA value of up to 0.74 and a long visualization time of 7 min. The materials are constructed with a bilayer structure comprising CLCPs and inorganic luminophors such as Y2O2S:Eu,Mg,Ti, SrAl2O4:Eu,Dy, and Sr2MgSi2O7:Eu. The CLCPs are synthesized from polymerizable liquid crystal monomer RM257, chiral dopants R/S5011, dipropylamine, photoinitiator Irgacure 651, cross-linker PETMP, and chain extender. The resulting materials exhibit excellent circularly polarized optics, enabling the implementation of circular polarization differential imaging (CPDI), where images are generated by subtracting two images captured through left- and right-handed circularly polarized filters. This work demonstrates the unique application of CPA in imaging, opening a new pathway for the use of purely inorganic solid-state luminophors in chiral functional materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3768-8
Damping materials are critical for mitigating vibrations and noise across various frequencies by converting mechanical energy into thermal energy. However, achieving a simultaneous high damping capacity and high toughness remains a formidable challenge. Here, we report a supramolecular polymer (SMP) that integrates high damping and toughness through the synergistic action of dynamic hydrogen bonds and side-chain relaxation. The polymer exhibits exceptional mechanical properties: a Young's modulus of 47.08 MPa, elongation at break of 605%, and toughness of 15.24 MJ m−3. The dynamic hydrogen bonds confer dual responsiveness to strain rate and temperature, with a 6.7-fold variation in Young's modulus under different stretching rates and a five-order-of-magnitude change in storage modulus across a temperature range. Under mechanical force, the interpenetrating side chains undergo mutual friction, enabling repetitive energy dissipation. This mechanism yields superior damping ability with a loss factor (tanδ) of 1.6 at 1 Hz, demonstrating outstanding performance in vibration absorption and noise reduction. The material's design offers a promising strategy for developing high-performance damping materials that balance energy dissipation and mechanical robustness, suitable for applications in wearable electronics, protective equipment, and structural vibration control.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025100102
Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants of concern in China, and drinking water is a major exposure pathway. This study investigated 17 PFAS in surface water from 12 drinking water sources along the Hubei section of the Yangtze River mainstream during dry, normal, and wet seasons. Total PFAS concentrations ranged from 10.84 to 41.05 ng/L (dry), nd to 62.60 ng/L (normal), and 6.77 to 29.00 ng/L (wet). Predominant compounds were PFBS, PFOA, PFHxA, PFBA, and PFOS. Lake-type sources exhibited significantly higher concentrations than river-type sources, and dry and normal seasons showed higher levels than wet season. Compared to other Chinese sources, PFAS levels in Hubei were moderate, with fluorochemical plant inputs and population density as likely influencing factors. Ecological and health risk assessments indicated acceptable risks. In four selected water supply systems, PFAS distribution from source to tap was examined; PFOA, PFBA, PFHxA, and PFBS were dominant, and secondary water supply did not significantly introduce or remove PFAS. Health risks from tap water were within acceptable limits.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032006
A thiol-functionalized Ti3C2Tx (SH-Ti3C2Tx) material was synthesized via chemical bonding of dithiothreitol (DTT) onto Ti3C2Tx MXene for the adsorptive removal of As(III) from water. Characterization by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) confirmed a typical two-dimensional layered structure with DTT covalently attached. The adsorption of As(III) on SH-Ti3C2Tx followed the Langmuir isotherm model, indicating monolayer adsorption. At pH 7, the maximum adsorption capacity reached 55.6 mg·g−1, which is 2.8 times higher than that of pristine Ti3C2Tx (20 mg·g−1). X-ray photoelectron spectroscopy (XPS) revealed that As(III) uptake primarily occurred via formation of As–S bonds. To enable continuous treatment, SH-Ti3C2Tx was loaded onto melamine sponge via electrostatic interactions to fabricate a flow-through adsorption column (SH-Ti3C2Tx@MS). This column achieved removal efficiencies of 99.5% for both high (100 mg·L−1) and low (100 μg·L−1) As(III) concentrations, reducing effluent As(III) to below the World Health Organization guideline of 10 μg·L−1. The spent column could be regenerated using 1 mol·L−1 NaOH solution, retaining over 80% of its initial removal efficiency after five consecutive adsorption–desorption cycles. The SH-Ti3C2Tx material demonstrates significant potential for efficient and reusable removal of As(III) from contaminated waters.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041505
To combat severe air pollution, China has implemented a series of air pollution control action plans since 2013, effectively alleviating PM2.5 pollution. However, PM2.5 concentrations in most cities within the Fenwei Plain still exceed national standards. This study systematically evaluates PM2.5 concentration changes across two policy phases (2013–2020) using the Community Multiscale Air Quality (CMAQ) model, quantifying contributions of meteorology and emissions, and analyzing sectoral source changes. Results show that annual average PM2.5 concentration declined cumulatively by 19% during 2013–2020. In the first phase (2013–2017), regional PM2.5 decreased by 3% annually, with most improvement in winter; however, due to unfavorable meteorology, concentrations increased in Xi'an and Xianyang. In the second phase (2017–2020), PM2.5 declined by an additional 16%, with more effective control measures, particularly in spring and autumn. Emission reductions dominated in both phases, with stronger effects in the second phase (−8 μg·m−3), significantly outweighing adverse meteorological contributions (+3.5 μg·m−3). Nevertheless, many cities still face challenges from unfavorable meteorology, highlighting the need for future policies to account for meteorological influences. Emissions from industrial, energy, and agricultural sources decreased significantly across both phases. However, during winter heating periods, residential emissions emerged as a source equal in importance to industrial emissions, becoming a key target for future emission controls.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3373-5
Halide perovskite nanocrystals (PNCs) exhibit high photoluminescence quantum yield (PLQY), narrow full width at half maximum (FWHM), and high color purity, yet their intrinsic instability under ambient, thermal, and photonic stress restricts deployment in optoelectronic devices. Embedding CsPbX3 (X = Br, I) PNCs within inorganic glass matrices mitigates degradation, but dense glass networks impede nucleation and growth. This work adjusts the GeO2-SiO2-B2O3 glass network via B2O3 addition to create loose, compact structures that facilitate PNC precipitation. Optimized CsPbBr3@Glass achieves a PLQY of 85%. Glass powders with varying particle sizes are screened for stability, identifying an optimal size range. Composite films of CsPbX3@Glass@PS (X = Br, I) with polymer materials yield light conversion films. Under 120 h blue light irradiation, green-light samples outperform red-light samples in stability. In situ heating-cooling cycles show thermal recovery exceeding 90% for green and 86% for red samples. A white light-emitting diode (WLED) constructed with CsPbBr3@Glass, CsPbBrI2@Glass, and a 460 nm InGaN chip achieves a color gamut covering 123% of NTSC 1953 and 91.8% of Rec 2020. An LCD incorporating green CsPbBr3@Glass@PS and red CsPbBrI2@Glass@PS films with a 450 nm mini-blue chip retains >90% of initial PL intensity after 15 days in 95% ethanol, demonstrating dual protection from glass and polymer. These results establish a pathway for stable, wide-gamut display backlights.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3565-y
Building heating and cooling account for 60% of operational energy consumption, and conventional radiative coolers suffer from thermal accumulation and high-temperature damage under continuous solar irradiance. This work reports a dual-functional polyimide (PI)-based phase change composite aerogel that integrates latent heat storage with radiative cooling. Carbonized PI fibers (CPIF) were fabricated via electrospinning, dispersed in polyamic acid aqueous solution, and freeze-dried followed by thermal imidization to yield CPIF/PI aerogels (CPs). Vacuum impregnation with molten polyethylene glycol (PEG) produced CPIF/PI phase change materials (CPPCMs), which were surface-coated with boron nitride (BN) to obtain shape-stable BN@CPPCMs. CPIF enhances thermal conductivity and, through compatibility with the PI matrix, improves structural stability. The BN coating raises solar reflectivity, suppressing operational temperature rise. The composite prevents single-function radiative coolers from thermal accumulation and high-temperature damage, achieving high enthalpy efficiency and effective temperature regulation. The protocol addresses the bottleneck of insufficient indoor temperature regulation in energy-efficient buildings by combining solar-thermal conversion and storage with passive radiative cooling in a single shape-stable architecture.