SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3705-5
Biodegradable metals (BMs) are designed to corrode gradually in physiological environments, yet this corrosion can compromise their mechanical integrity, potentially causing premature implant failure. For emerging zinc-based alloys, the corrosion-mechanical property relationship remains inadequately characterized. This study systematically investigated the long-term corrosion-associated mechanical behavior of hot-extruded Zn-Cu and Zn-Cu-Fe alloys, promising Zn-based bio-metals, in comparison with pure Zn, under immersion degradation in Hank's solution. Electrochemical impedance spectroscopy and mechanical testing revealed that the evolving corrosion profile governs mechanical performance. Alloying with Cu and Fe mitigated corrosion's detrimental effects: grain refinement reduced localized corrosion susceptibility, while finely dispersed second phases acted as cathodic sites, promoting uniform corrosion. Additionally, Cu and Fe facilitated the formation of protective corrosion product layers, suppressing further matrix attack. Consequently, the overall reduced corrosion, particularly localized corrosion, lowered stress concentration susceptibility, delaying mechanical decline and preserving structural integrity. These findings elucidate the degradation-mechanical property correlation in Zn-based bio-metals and underscore critical considerations for developing new bio-metals for clinical translation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506041
Urban and rural multi-source organic waste faces bottlenecks including high compositional heterogeneity, single resource recovery pathways, and uneven product quality. In the Taihu Lake region, active tourism and catering, high greening, and dense water networks generate large volumes of diverse waste with high moisture content, exacerbating these issues. This study evaluated a coupled bio-drying and aerobic composting process at a demonstration center in Linhu Town, Suzhou, Jiangsu Province, employing a three-stage control strategy: gradient dewatering, high-temperature stabilization, and maturation enhancement. Continuous operation showed that kitchen waste moisture content decreased from 77.70% to 58.69% after 1 day of bio-drying, to 23.22% after 7 days of silo reactor composting, and to 17.70% after at least 20 days of maturation. The aerobic composting phase maintained temperatures above 55°C for over 5 days, reaching a maximum of 68.1°C, meeting the harmless treatment requirements of CJJ 52—2014. After 20 days of maturation, the organic fertilizer product had an electrical conductivity below 4.00 mS·cm−1, organic matter content of 51.22%, total nutrient content of 5.61%, and heavy metal concentrations below the limits of NY/T 525—2021. The results provide technical support for efficient treatment and resource utilization of urban and rural organic waste.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025101101
Acetamiprid, a representative neonicotinoid insecticide, persists in soil and water, posing ecological risks. This study evaluated its transgenerational toxicity in Caenorhabditis elegans exposed to 1, 10, and 100 μg·L−1. Direct exposure (F0) caused neurobehavioral abnormalities, with head swing frequency significantly increased by 23.86% even at 1.0 μg·L−1, correlating with disrupted acetylcholinesterase and γ-aminobutyric acid. Reproduction, development, metabolism, and intestinal barrier were impaired, with reactive oxygen species elevated by 30.42%–48.28%, indicating oxidative stress as a mechanism. Effects transmitted to unexposed T1–T3 generations: at 1.0 μg·L−1, body width inhibition persisted to T2; fat accumulation and intestinal permeability effects intensified with concentration. Among oxidative stress biomarkers, superoxide dismutase showed highest sensitivity and transgenerational persistence. This study reveals multidimensional transgenerational toxicity, informing soil ecological risk assessment of neonicotinoids.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025102501
Non-antibiotic emerging contaminants (ECs) pose a growing threat to aquatic organisms, particularly fish, yet their impact on gut microbiota remains inadequately characterized. This systematic review synthesizes current evidence on the effects and mechanisms of non-antibiotic pharmaceuticals, pesticides, per- and polyfluoroalkyl substances (PFAS), nanomaterials, and microplastics on fish gut microbiota. Exposure to these ECs directly alters microbial composition and diversity, while indirectly disrupting host metabolism and immune function, leading to significant health impairments. Notably, EC exposure induces dysregulation of key factors such as lipopolysaccharide (LPS), compromising intestinal barrier integrity. Concurrently, gut microbiota can metabolically transform certain ECs into derivatives, establishing a complex pollutant-microbiota-host interaction network. The gut microbiota mediates EC-induced neurotoxicity, immune dysfunction, and metabolic disorders through signaling pathways such as TLR/NF-κB and metabolic homeostasis regulation. Current research predominantly addresses short-term exposure effects, leaving long-term low-dose impacts and transgenerational mechanisms poorly understood. Future investigations should employ multi-generational exposure and microbiota transplantation to elucidate gut microbiota-mediated toxicity mechanisms under non-antibiotic EC stress. This review underscores the urgent need for comprehensive risk assessment and regulatory frameworks targeting non-antibiotic ECs in aquatic environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3754-1
Chiral polyester materials that integrate chemical recyclability with high performance have become a focal point in sustainable polymer research. Their thermal and mechanical properties are intrinsically linked to polymer microstructure, with stereoregular chiral polyesters typically exhibiting superior crystallinity and performance relative to atactic counterparts. Asymmetric kinetic resolution polymerization (AKRP) has emerged as a powerful method for synthesizing stereoregular chiral polyesters from racemic monomers, utilizing chiral catalysts to selectively recognize and polymerize one enantiomer while leaving the other unreacted. Recent advances have expanded AKRP scope to include targeted recognition of specific substrate sites based on chiral discrimination. This review summarizes recent progress in AKRP across representative monomer systems, categorized by ring size, highlighting breakthroughs in catalyst design, mechanistic understanding, and material properties. Key metrics such as kinetic resolution coefficient (k_rel) and selectivity factor (s-factor) are discussed as quantitative measures of stereoselective control. The review underscores the potential of AKRP to circumvent costly enantiomer separation, offering a promising route to advanced chiral polyesters with tailored properties for applications ranging from biodegradable plastics to biomedical materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3718-3
Chiral polymers, characterized by unique stereochemical features, are of significant importance in biomedical and related fields. Understanding their structure-property relationships is crucial for the rational design of functional materials with tailored performances. In this work, we employed a catalyst enantiomer purity regulation strategy to achieve regioselective ring-opening polymerization of chiral monomers. By systematically varying the enantiomer purity of chiral (BisSalen)Al catalysts, we successfully synthesized a series of chiral poly(2-hydroxybutyric-co-glycolic acid) (PHBGA) copolymers with varying regioselectivities and G–G linkage contents. Performance evaluations revealed that these polymers exhibited thermo-mechanical properties closely correlated with their microstructures. Specifically, the glass transition temperature (Tg) and mechanical moduli could be tuned over a wide range by adjusting the catalyst enantiomer purity, which directly influenced the polymer's chain regularity and crystallinity. This study not only provides an effective approach for the controlled synthesis of chiral polymers with tunable regioselectivities but also deepens the understanding of their structure-property relationships, laying a foundation for the development of chiral polymeric materials with on-demand functionalities for diverse applications.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608005
The escalating volume of end-of-life carbon fiber reinforced polymer (CFRP) and the high energy consumption and emissions of virgin fiber production necessitate low-carbon recycling technologies. Superheated steam pyrolysis, an emerging method, is systematically reviewed. At 450–500 °C, the synergistic 'hydrothermal-weak oxidation' mechanism enables controlled resin cracking and simultaneous char removal. Key parameters—temperature, oxygen concentration, residence time, and CO2/steam two-step coupling—affect the mechanical, surface, and electrical properties of recycled carbon fiber (rCF). A 'low-temperature, short-duration, micro-oxygen' process retains over 90% tensile strength. Comparison of laboratory, pilot, and industrial setups highlights challenges in exhaust gas treatment, multi-component waste adaptability, and energy integration. Life cycle assessment (LCA) confirms this route reduces energy consumption by ~25% and carbon emissions by ~30% versus landfilling/incineration, offering environmental and economic advantages. Future research should focus on product databases, distributed recycling networks, and unified LCA frameworks to support CFRP closed-loop recycling.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608014
Fluoride pollution poses a serious threat to public health worldwide, particularly in dispersed residential areas where high-fluoride groundwater is the primary drinking water source. Electroflocculation-based defluorination is a preferable treatment option, but its environmental and economic impacts vary with the water supply scheme. This study established three schemes: centralized undifferentiated (S1), centralized differentiated (S2), and distributed differentiated (S3). Life cycle environmental impact and life cycle cost assessments were conducted. Results show that S1 has the largest negative environmental impact, with indicators ranging from 1.4 to 6.7 times those of S2 or S3, primarily due to electrode consumption and electricity usage. S3 exhibits the lowest water supply cost, achieving a 62% cost reduction compared to S1. The distributed differentiated scheme (S3) offers both lower life cycle environmental impact and the lowest life cycle cost, making it the most advantageous option for dispersed residential areas. This study provides a systematic basis for selecting optimal water supply schemes, promoting the practical application of electroflocculation defluorination in such regions.