SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4433-5
Negative thermal expansion (NTE) and zero thermal expansion (ZTE) materials are technologically relevant for precision engineering, yet their practical deployment is constrained by narrow operating temperature windows. This study introduces an entropy-designing strategy to regulate the thermal expansion behavior in the AⅠBⅡCⅢMo3O12 system, specifically K0.4(Mg0.25Mn0.25Co0.25Ni0.25)0.4Sc1.6Mo3O12 (CE0.4MO) and related CExMO compositions (x = 0.4, 0.6, 0.8, 1.0). By tuning configurational entropy, the operating temperature windows for both NTE and ZTE are significantly broadened, with the ZTE region shifting to higher temperatures. Among single-phase compositions, CE0.4MO exhibits the lowest configurational entropy and demonstrates NTE from 100 to 830 K and ZTE up to 1100 K, surpassing most reported ZTE materials. Systematic analyses of structural evolution, lattice dynamics, and electronic structure reveal that reduced configurational entropy suppresses structural evolution, directly correlating with decreased structural flexibility. Higher atomic displacement parameters (ADPs) of oxygen in CE1.0MO provide experimental evidence for enhanced flexibility. Raman spectroscopy shows that the full width at half maximum (FWHM) of peaks in the 750–900 cm-1 range positively correlates with configurational entropy, indicating reduced lattice disorder, while modes within 750–1050 cm-1 blue-shift as entropy decreases, confirming lattice stiffening. Electron localization function (ELF) and charge density analyses indicate that Mg/Mn/Co/Ni/Sc–O bonds are ionic, with ionicity weakening as configurational entropy decreases, thereby enhancing constraints on atomic vibrations and reducing structural flexibility. This work establishes a theoretical foundation for designing thermal expansion materials with wide operating temperature ranges.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4337-2
Silica aerogels are recognized as leading super-insulating materials due to their ultralow thermal conductivity, yet their intrinsic brittleness and poor processability restrict practical deployment in complex industrial and extreme environments. This study introduces a macro-scale 'stiff–soft' synergistic strategy, combining a macroscopically processable, soft-and-tough framework as the load-bearing component with hard-and-brittle polymethylsilsesquioxane (PMSQ) aerogels as the insulating component. A pressure-driven assembly process enables viscosity-tunable PMSQ gel inks to be controllably infused into various hollow frameworks, including honeycomb panels, wheat straws, and hollow fibers. Guided by a modified Hagen–Poiseuille model, ink viscosity is precisely matched to the geometric parameters of the hollow structures. The resulting composites achieve compressive strength of 2.5 MPa, flexural strength of 6.25 MPa, and tensile strength of 40 MPa, while maintaining excellent thermal insulation. This versatile and scalable approach offers a new design paradigm for mechanically adaptive silica aerogel composites in thermal management applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3596-2
High-entropy alloys (HEAs) have shown great promise in the CO2 reduction reaction (CO2RR) due to their tunable composition and unique physical and chemical properties. However, the role of HEAs in CO2RR and the underlying reaction mechanism remain underexplored, particularly through in situ techniques. In this work, we investigate the mechanism of CO2 reduction on AuAgCuPdPt HEAs using in situ Raman spectroscopy and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy to reveal key intermediates and reaction pathways. Our results demonstrate that within the potential window of −0.2 to −0.7 V vs. reversible hydrogen electrode (RHE), the AuAgCuPdPt HEAs efficiently reduce CO2 to CO, achieving a Faradaic efficiency (FE) for CO greater than 90%, with a peak FE of 96.5% at −0.3 V vs. RHE. The CO2− intermediate was observed at low potentials, revealing the reaction pathway in the CO2 reduction process. Additionally, in situ ATR-FTIR results suggest that the introduction of an appropriate amount of Pt metal not only promotes water dissociation to generate protonic hydrogen, but also facilitates the desorption of *CO intermediates. The kinetic isotope effect of hydrogen-deuterium (H-D) confirms that water dissociation acts as a key proton donor in CO2RR. Furthermore, the catalyst of AuAgCuPdPt HEAs was applied as cathodes in a Zn-CO2 battery, achieving 90.23% FE for CO and a power density of 3.474 mW cm−2. This study provides new insights into the mechanistic understanding of CO2 reduction and underscores the importance of in situ spectroscopic techniques for advancing the design of efficient electrocatalysts for CO2 conversion.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3679-8
Idiopathic pulmonary fibrosis (IPF) is a chronic interstitial lung disease with high mortality and limited therapeutic options. Dysregulated macrophage polarization drives fibroblast activation and epithelial-mesenchymal transition (EMT), yet no effective management exists. Here, we develop an inhalable methane nanocapsule (MNC) that spatiotemporally controls methane release in the lung to remodel the fibrogenic microenvironment. MNC is formulated via self-assembly of biodegradable poly(lactic-co-glycolic acid)-polyethylene glycol (PLGA-PEG) and a novel acid-responsive methane prodrug Fe(BPY)2(CH3)2, enhancing mucosal penetration and sustained methane release in acidic inflammatory niches. In a bleomycin (BLM)-induced pulmonary fibrosis model, MNC inhalation achieves efficient lung deposition and sustained methane release, significantly reducing inflammation, ameliorating fibrosis, and improving lung function without systemic side effects. Mechanistically, MNC rebalances macrophage polarization by inhibiting M2 phenotype overexpression and downregulates the MMP9/TIMP-1 ratio to suppress myofibroblast proliferation and EMT, synergistically halting fibrotic progression. This inhalable methane nanocapsule offers a promising strategy for safe and effective IPF treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3557-3
The commercialization of perovskite solar modules (PSMs) is hindered by the challenge of achieving uniform, high-quality perovskite films over large areas with scalable manufacturing methods. While the laminar air drying (LAD) method has demonstrated high manufacturing efficiency and module performance, the geometric design of the drying apparatus is critical for uniform and efficient drying. This paper reviews the state-of-the-art in perovskite crystallization and film formation, emphasizing the role of drying kinetics in determining film quality. We analyze the LAD method reported by Yan et al., which achieved square meter-sized modules with excellent efficiency and stability, and contrast it with alternative scalable deposition techniques such as air knife and vacuum flash-assisted methods. The operational lifetimes of perovskite modules (~9 years) remain below those of silicon modules (~15 years) and PV modules (>20 years), underscoring the need for improved stability. We discuss the fundamental aspects of crystallization in nanocrystals, single crystals, and thin films, and the influence of vertical orientation in 2D perovskites. The review highlights the importance of process control in scalable deposition, particularly the role of airflow uniformity in preventing cracking and defects. Our analysis provides a framework for optimizing LAD parameters to achieve high-quality films, addressing the critical bottleneck of scalability and stability for perovskite photovoltaics.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605018
To address the inadequacy of existing temporal emission allocation coefficients for oil storage, transportation, and sales sources in regions with distinct seasonal temperature variations, this study focused on a large oil depot in Northwest China. A method for establishing temperature-dependent hourly allocation coefficients for VOCs emissions was proposed, revealing a positive correlation between ambient temperature and emission coefficients. The coefficient peaked at 0.068 when temperatures exceeded 14 °C and dropped to a minimum of 0.007 below 8.5 °C. Annual VOCs emissions totaled 256.13 t, with summer contributing 108.89 t (42.51% of annual total) and winter only 12.54 t (4.90%), making summer emissions approximately 8.68 times higher than winter. Using CALPUFF dispersion modeling, dynamic source strength scenarios produced a maximum hourly concentration of 2242.7 μg/m³, a 55.12% increase over the constant source strength scenario (1445.8 μg/m³). The area of exceedance increased by 0.03 km², and the atmospheric environmental protection distance extended by 450 m, from 0 m to 450 m. These results demonstrate that conventional constant emission assumptions underestimate peak concentrations and protection distances, posing health risks to nearby residents. The study provides a scientific basis for localized emission regulation and improved environmental protection distance calculations.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511020
With the increasing number of oil pipelines crossing rivers, the potential risks of oil leakage and surface spreading to river ecosystems and water environments are becoming more severe. Scenario-based simulation of oil spill diffusion is a prerequisite for effective interception point placement and leakage risk prevention. Numerous factors influence oil spill diffusion, including environmental conditions, river hydrology, and accessibility of emergency resources. This study integrates these factors and multiple dynamic processes to design eight typical scenarios for oil spill diffusion simulation, considering emergency resource locations, river hydrological regimes, and leakage modes. A case study is conducted on an oil pipeline crossing a river in northwest China. Results indicate that the diffusion distance and affected area are primarily controlled by water conditions and emergency resource accessibility. In emergency management, the efficiency of maintenance and repair resources during high-water months should be prioritized. Mechanistically, external forces such as hydraulic and wind forces have a greater influence on diffusion distance, surpassing internal forces like gravity, viscosity, and surface tension within a short time. For river crossings near emergency resources, internal force effects should be considered in oil spill diffusion simulations. When emergency resource arrival times are long, the diffusion distance based on Fay's theory is relatively small and can be neglected in engineering practice. This study provides a computational basis and methodological reference for risk assessment and emergency response to potential oil spills from pipelines crossing rivers, enhancing the scientific and effective nature of risk prevention and emergency handling.