SinoGreenTech Academic Portal
CS
Verified CAS / Academic Author8 Decoded Studies

Prof. CHENG Shi

School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China

Co-Affiliations:State Key Laboratory of Water Pollution Control and Green Resource Recycling, School of the Environment, Nanjing UniversityNanjing University, State Key Laboratory of Water Pollution Control and Green Resources Recycling

Research Publications & English Decoded Briefs

Showing 8 publications
SCIENCE CHINA Materials2026DOI: 10.1007/s40843-026-4213-x

Bioelectric Responsive Nanozymes for Catalytic Control of Lipid Peroxyl Radicals

Lipid peroxyl radicals (ROO·) are terminal propagating species in lipid peroxidation, driving oxidative damage in neurological disorders. Their prolonged lifetime and rapid diffusion within lipid membranes render them difficult to neutralize. Here, we report a bioelectric-responsive TEMPO-doped polydopamine (PDA@TEMPO) nanozyme that sustains catalytic interception of ROO· radicals under persistent oxidative stress. By coupling a PDA redox reservoir with TEMPO catalytic centers, the nanozyme establishes a self-regenerating radical-neutralization cycle via proton-coupled electron transfer (PCET). The π-conjugated framework facilitates charge migration and enables an electric-field-enhanced antioxidant response. In a seizure model, the nanozyme dynamically responds to bioelectric fluctuations, accelerating radical interception and alleviating oxidative stress in neural microenvironments. These findings establish bioelectric-coupled nanozymes as a general strategy for catalytic and sustained regulation of oxidative stress in neural microenvironments, providing a potential therapeutic approach for neurological disorders.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-3733-2

A Heterocatalyst-Modified Separator Enables Multi-Stage Sodium Compensation for Long-Life Sodium-Ion Batteries

Irreversible sodium loss, primarily caused by solid electrolyte interphase (SEI) formation during initial cycling, significantly degrades the capacity of sodium-ion batteries by depleting active sodium. While pre-sodiation mitigates initial sodium loss, it fails to address continuous loss throughout the battery lifecycle. To overcome this limitation, we propose a sustained sodium compensation strategy utilizing activation-releasing systems. Key to this approach are high-capacity sodium compensators, Na2C2O4 and Na2C4O4, supported on a B and N co-doped Mo2C-W2C (MoW-C) heterostructure catalyst. This configuration enables efficient sodium release at charging voltages of 3.53 and 3.78 V, respectively. By integrating the sodium supplement agent onto the separator, and precisely controlling voltage and charge, multiple sodium replenishment is achieved over the entire battery lifecycle. This strategy reduces initial active sodium loss by 36.53%. Furthermore, a single activation during subsequent usage provides an additional 0.115 mAh cm−2 of active sodium. As a result, the cell exhibits exceptional cycling stability, with a capacity loss of only 0.059% per cycle over 350 cycles at 0.5 C.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-3598-1

Achieving Near-Intrinsic Electrical Properties of Graphene Nanoribbons via AgTe Monolayer Intercalation

Embedding a dielectric layer between as-synthesized graphene nanoribbons (GNRs) and metal surfaces represents a powerful strategy to achieve electronic decoupling, thereby enabling the extraction of these ribbons' intrinsic electrical properties. Although several reports have documented dielectric intercalation between GNRs and metal substrates, studies on Ag(111) substrates are limited. Here, we demonstrate a semiconducting AgTe monolayer intercalation method to achieve electronic decoupling between as-synthesized GNRs and an Ag(111) substrate. Using low-temperature scanning tunneling microscopy, we directly observed the AgTe intercalation process at the GNR/Ag(111) interface. By combining scanning tunneling spectroscopy and density functional theory calculations, we elucidate the critical role of AgTe monolayer intercalation in reducing the interaction between as-synthesized GNRs and the Ag(111) substrate and observe the near-intrinsic electrical properties of the GNRs. Our findings offer a practical and effective strategy for intercalating AgTe monolayers between carbon-based nanomaterials and Ag(111) substrates, facilitating the unambiguous characterization of the near-intrinsic electronic properties of these materials.

Chinese Journal of Environmental Engineering2026DOI: 10.12030/j.cjee.202507059

Application of Immobilized White Rot Fungi in the Treatment of Anaerobic Digestion Sludge

Anaerobic digestion sludge (ADS) contains recalcitrant organic matter and exhibits poor dewaterability, posing challenges for disposal. This study evaluated the immobilization of white rot fungi (WRF) on four carriers—polyvinyl alcohol, cotton thread, wood chips, and sodium alginate—for ADS treatment. Cotton thread immobilization yielded the earliest and most sustained enzyme activity, highest biomass retention, and minimal biomass loss. WRF treatment achieved a 10.09% removal of total chemical oxygen demand (TCOD) and significantly disrupted extracellular polymeric substances (EPS), selectively degrading soluble EPS. To maintain fungal activity, periodic carrier replacement was required. Compared to the control, the experimental group showed an 8.9 mg·L−1 reduction in total protein and polysaccharide content in soluble EPS, a 27.33% decrease in capillary suction time (CST), and improved sludge dewaterability. These results demonstrate the potential of WRF for ADS treatment.

Environmental Chemistry2026DOI: 10.7524/j.issn.0254-6108.2025121001

Progress in Design, Preparation and Application of Ion Chromatography Stationary Phases for Analysis of Anions in Water

Ion chromatography (IC) is the core analytical method for qualitative and quantitative determination of anions in complex water environments, and its separation efficiency highly depends on the performance of the stationary phase. This review systematically summarizes recent progress in the preparation and functionalization of IC stationary phases, addressing the urgent need for high selectivity and sensitivity in water anion analysis. The characteristics of organic polymer-based and inorganic-based matrices are compared, highlighting the advantages of polymer matrices such as poly(methacrylate), poly(vinyl alcohol), polystyrene-divinylbenzene (PS-DVB), and ethylvinylbenzene-divinylbenzene (EVB-DVB) in terms of wide pH tolerance (e.g., pH 0–14 for PS-DVB) and organic solvent compatibility, which allow the use of strong acid or base eluents. Various functionalization strategies are discussed, including the introduction of quaternary ammonium groups, hydrophilic modifications, and grafting of functional layers, which enhance separation selectivity and detection capability. The review also covers the development of hybrid stationary phases and the application of IC in monitoring trace pollutants in water, such as bromate, chlorite, chlorate, fluoride, and nitrate, as regulated by Chinese standards (GB 5749—2022). Future trends are projected, focusing on novel materials for precise identification and high-throughput monitoring. The paper provides a comprehensive reference for the design of high-performance stationary phases, emphasizing the importance of matrix selection and surface chemistry in achieving robust and sensitive anion analysis.

Environmental Chemistry2026DOI: 10.7524/j.issn.0254-6108.2025102002

Influence of UV Intensity on Escherichia coli Inactivation Efficiency in the UV/Cl2 Process

The ultraviolet/chlorine (UV/Cl2) advanced oxidation process generates multiple radical species, enabling synergistic disinfection. However, the systematic influence of UV intensity on process performance remains inadequately characterized. This study investigated UV intensities from 0.25 to 2.0 mW·cm−2, assessing chlorine photolysis kinetics, bacterial inactivation, and disinfection by-product (DBP) formation. Results demonstrate that inactivation efficiency is not solely governed by total UV energy but is co-regulated by reaction kinetics and mass transfer. Increasing UV intensity accelerated chlorine photolysis by 33.7%–277.8%, elevating steady-state concentrations of hydroxyl radicals and chlorine radicals by factors of 1.6–3.8 and 1.3–3.2, respectively, thereby enhancing initial inactivation rates. However, higher intensities reduced cumulative chlorine exposure (CT value) to 14.3%–55.7% of baseline, causing overall inactivation to first increase then decrease. At a fixed UV dose of 150 mJ·cm−2, an intensity of 1.0 mW·cm−2 achieved optimal 6.5-log inactivation of Escherichia coli and the lowest bacterial reactivation rate (0.07%). Common water constituents (HCO3−, Cl−, natural organic matter) inhibited disinfection, with natural organic matter exerting the strongest suppression (2.7-log reduction). Notably, 1.0 mW·cm−2 exhibited the greatest resistance to interference. Elevated intensity reduced total organic halogen formation from 33.7 μg·L−1 to 19.0 μg·L−1. Balancing disinfection efficacy and DBP risk, 1.0 mW·cm−2 is identified as the optimal UV intensity for the UV/Cl2 process in sand-filtered water treatment.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-3942-2

Work-function-engineered high-entropy alloy/carbon nanofibers direct Na+ transport for stable anode-free sodium batteries

Anode-free sodium metal batteries (AF-SMBs) are promising for high-energy, low-cost energy storage, but suffer from interfacial instability due to sluggish Na+ kinetics and non-uniform deposition. Here, we report a scalable electrospinning-pyrolysis route to anchor FeCoNiCuMn high-entropy alloy (HEA) nanoparticles on N-doped carbon nanofibers (HEANCF). Density functional theory (DFT) calculations reveal high binding energy toward Na atoms, facilitating desolvation and adsorption. A built-in electric field (BIEF) arises from work function differences, driving electron redistribution and guiding uniform Na+ diffusion. The heterostructure also shows strong affinity for PF6− anions, promoting NaF-rich SEI formation that suppresses electron tunneling and parasitic reactions. Full cells with Na3V2(PO4)3 cathodes achieve 80% capacity retention after 600 cycles at 1 C. Ah-level pouch cells deliver ~200 Wh kg−1 and retain 87% capacity after 150 cycles at 0.5 C. This work establishes a coherent interfacial-kinetics framework for practical AF-SMBs.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-025-4039-1

Inhibition of Residual Kynurenine Pathway Activity Boosts Antitumor Immune Responses

Immunosuppressive metabolites are major drivers of tumor immune suppression. Among these, kynurenine (Kyn) is produced through the catalysis of tryptophan (Trp) 2,3-dioxygenase (TDO) in hepatocellular carcinoma. However, TDO inhibition alone is often insufficient because residual pathway flux sustains the accumulation of the downstream immunosuppressive metabolite quinolinic acid (QA). Here, we propose a strategy to disrupt residual kynurenine pathway activity to enhance metabolism-driven tumor immunotherapy. We develop acid-responsive metal-organic complex nanoparticles (APAP@TDOi-Zn, ATZn) that integrate the TDO inhibitor (TDOi) and Zn2+, while encapsulating acetaminophen (APAP) to inhibit 3-hydroxyanthranilate 3,4-dioxygenase (HAAO), thereby limiting QA production and simultaneously suppressing the residual immunosuppressive metabolite. QA suppression limits M2 macrophage polarization, whereas Kyn inhibition and Zn2+ supplementation promote T cell proliferation and cytotoxicity. Consequently, ATZn rewires Trp-Kyn metabolism and augments antitumor immunotherapy. This work enhances the efficacy of metabolic checkpoint blockade and provides a strategy to overcome metabolism-driven immune resistance.