SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4477-7
The rapid demand for high-energy-density lithium batteries necessitates advanced solid-state electrolytes (SSEs) to overcome the safety and performance limitations of conventional liquid counterparts. Macrocyclic compounds, with their well-defined cavities, programmable binding sites, and tunable self-assembly, have emerged as powerful molecular regulators for designing next-generation SSEs. This review examines recent advancements in macrocyclic compound-based SSEs by categorizing their functions into four fundamental supramolecular regulation paradigms: cation-centered regulation (e.g., crown ethers), anion-centered regulation (e.g., calixarenes and calixpyrroles), channel-dominated transport (e.g., cyclodextrins), and hybrid regulation (e.g., cucurbiturils). We elucidate how these macrocycles precisely control ion coordination, modulate migration dynamics, and reshape interfacial chemistry, leading to enhanced ionic conductivity, improved Li+ transference numbers, suppressed lithium dendrite growth, and superior interfacial stability. While each paradigm offers distinct advantages, the most promising SSEs often leverage synergistic combinations of these strategies. Finally, we highlight the remaining challenges, including synthetic complexity and multi-objective performance trade-offs, and propose future research directions for developing highly efficient and durable macrocycle-based solid-state lithium batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4110-9
Flexible tactile sensors are pivotal for human-machine interaction, yet accurate decoupled sensing of three-dimensional (3D) forces and integration into functional systems remain challenging. Here, we present a piezoresistive 3D force sensor based on ionic hydrogels that detects and analyzes multi-directional forces. The sensor exhibits a linear response to normal forces from 1 to 25 N (R²=0.99) and maintains stable sensitivity for shear forces within 0–4 N. By incorporating both force magnitude and direction, the sensor enables multidimensional password input, expanding traditional one-dimensional passwords into numeric, alphabetic, and Morse code formats. Experimental results demonstrate significant potential for enhancing information security. The sensor's simple structure, mature fabrication, and ease of integration with flexible electronics underscore its practicality. This work addresses the bottleneck of unidirectional sensing in conventional flexible pressure sensors, offering a robust solution for multidimensional force acquisition in human-machine interfaces, soft robotics, and biomechanical monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3848-7
Conventional heterogeneous photocatalysts often suffer from insufficient light absorption, rapid charge recombination, and a lack of specific reactive sites for efficient photocatalytic oxidation. To overcome these limitations, we propose a molecular polarization engineering approach utilizing structurally well-defined donor (D)-acceptor (A) covalent triazine frameworks (CTFs). The construction of dipole-induced built-in electric fields within the D-A-structured CTFs enables enhanced exciton dissociation and facilitates directional charge transfer. Specifically, the asymmetric A1-D-A2 moiety enhances molecular polarization in the dual-acceptor system CTF-TBT (A1-D-A2), enabling efficient charge separation through multiple electron-withdrawing units. This structural design promotes directional electron transfer toward the secondary acceptor (benzothiazole, A2), while simultaneously concentrating holes on the donor unit. Consequently, the A2 moiety acts as a site for efficient O2 activation via electron accumulation, whereas the highly oxidized donor unit provides strongly positive holes (h+) that facilitate substrate oxidation. Experimental and DFT calculation results confirm that CTF-TBT demonstrates highly enhanced photocatalytic oxidation performance, which can be attributed to its multi-channel charge separation mechanism and spatially separated redox-active sites. This study highlights the effectiveness of molecular dipole engineering in designing heterogeneous photocatalysts with controlled charge transfer pathways and improved redox capabilities. The proposed design principles provide a universal approach for promoting solar-driven chemical synthesis applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3689-9
Converting body heat into electricity presents an appealing route for sustainably powering wearable electronics; however, conventional thermoelectric materials face significant drawbacks, including high ionic concentrations, toxicity, and limited thermoelectric efficiency. Here, we report an ionic thermoelectric hydrogel designed through precise supramolecular chemistry, utilizing dual molecular interactions: host-guest complexation of α-cyclodextrin (α-CD) with I3− ions and hydrogen bonding between polyvinyl alcohol (PVA) polymer chains and I3−. This molecularly tailored approach markedly amplifies thermoelectric performance, achieving a high thermopower of 2.21 mV/K and a tenfold enhancement in peak power output at an exceptionally low iodine concentration (10 mmol/L I− + 2.5 mmol/L I3−). The hydrogel maintains excellent biocompatibility and mechanical robustness, suitable for direct skin contact. Demonstrated applications include flexible thermoelectric devices generating nearly 100 mV from body heat and sensor arrays capable of motion and spatial temperature sensing. These results underscore the substantial potential of supramolecularly designed ionic thermoelectric hydrogels for wearable energy harvesting, personalized healthcare monitoring, and advanced human-computer interfaces.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510004
Ammonium salt crystallization-induced blockage of the regenerative heat exchanger in regenerative thermal oxidizers (RTOs) remains a critical operational challenge, particularly in pharmaceutical applications where NH4Cl constitutes up to 70% of the fouling deposits. This study employs computational fluid dynamics (CFD) to systematically simulate six purging configurations, varying injection angle and pipe arrangement, and quantifies purging effectiveness via a novel evaluation method based on characteristic observation planes. Using the Realizable k-ε turbulence model coupled with a porous media model, we analyze the velocity distribution and low-velocity failure zones at the gas chamber–regenerator interface. Results demonstrate that a single-pipe 45° oblique injection achieves the highest effective purging area of 57.6%, a 35.7% improvement over conventional horizontal purging. Increasing pipe diameter significantly enhances flow uniformity, yielding an efficiency gain of approximately 40%, outperforming mere increases in gas velocity. A synergistic optimization strategy is proposed, prioritizing high-performance purging structures with coordinated parameter tuning. The recommended configuration—single-pipe 45° injection, 280 mm pipe diameter, and 14 m·s−1 gas velocity—achieves 88.2% purging efficiency without additional fan power, representing a 45.6% improvement over conventional modes. These findings provide a theoretical basis and engineering solution for RTO purging system design and operational optimization.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606002
Industrial volatile organic compounds (VOCs) emissions are a major contributor to regional air pollution, and the rubber paste preparation process is a significant source. This study developed an intelligent monitoring system for whole-process VOCs management in a rubber paste preparation workshop, integrating software engineering and Internet of Things (IoT) technologies. The system architecture combines a hybrid database (MySQL relational and InfluxDB time-series), MQTT-based low-power wide-area communication, role-based access control, and containerized microservices. Field deployment at a large rubber enterprise enabled real-time monitoring of adsorption/desorption centrifugal fans and data fusion analysis. Under typical operating conditions, the extraction and ventilation systems achieved volume flow rates of 40,000 m³/h and 30,000 m³/h, respectively, maintaining a continuous micro-negative pressure environment that effectively suppressed fugitive emissions. The purification process, comprising zeolite rotor adsorption and regenerative thermal catalytic oxidation, reduced non-methane hydrocarbon (NMHC) concentrations to below 10 mg/m³, meeting the GB 27632—2011 emission standard. The system's multi-level permission management module precisely allocated operational responsibilities across production, environmental, and management roles, reducing response time to abnormal conditions. An online evaluation model for purification efficiency was constructed based on the actual process. The system demonstrates potential for extension to other high-VOCs industries such as coatings and printing. This research provides theoretical and practical references for applying computer technology to VOCs reduction and whole-process management in typical industries.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606021
To provide a theoretical basis for energy-saving combustion of regenerative thermal oxidizers (RTOs), this study analyzes energy nodes during RTO operation, refines heat balance accounting, and establishes an overall energy system. Taking a three-chamber RTO as the research object, the enthalpy of exhaust gas at different stages is calculated, and a whole-process heat balance model is developed to systematically analyze exhaust gas preheating, combustion, heat recovery, and heat loss transfer. An improved energy accounting method is proposed to address dynamic heat exchange inside heat accumulators, coupling of multiple gas streams, and boundary heat loss under complex conditions. The longitudinal temperature distribution function of heat accumulators is introduced to overcome difficulties in heat accounting within the accumulator chamber. A thermodynamic system covering 11 key internal energy nodes is constructed. Combined with design characteristics of RTO operation across industries, the application scope of the overall energy system is analyzed; equilibrium terms can be adjusted according to actual conditions, ensuring wide applicability. Validation via an RTO energy system for a glove manufacturing plant demonstrates that outlet temperature prediction accuracy improves from 14.3% to 2.8%, providing a theoretical foundation for future intelligent energy-saving combustion research.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3921-2
Moisture-enabled energy harvesting technologies offer a promising route for self-powered strain sensing, yet conventional generators suffer from slow response, poor recovery, and limited multidirectional resolution. Here, we report a stretchable thermoplastic polyurethane (TPU) nanofiber moisture-enabled electric generator (MEG) with highly aligned ion channels. A carbon black/sodium dodecylbenzene sulfonate (CB/SDBS) layer is coated on the TPU membrane, while carboxymethyl cellulose (CMC) and acidified poly(sodium 4-styrenesulfonate) (HPSS) are applied on opposite sides, establishing lateral hydrophilicity and ion gradients to drive directional ion migration. The planar MEG is lightweight, flexible, and requires no fully covered electrodes, enabling conformity to complex deformations. The aligned channels reduce ion migration tortuosity, enhancing ion transport efficiency and flux. As a result, the aligned MEG (ATMEG) delivers 0.2 V and 0.51 μA cm−2 at ~90% relative humidity, corresponding to 400% and 287% enhancements compared with the unaligned MEG (UATMEG). The ATMEG also exhibits ultrafast response (0.16 s) and recovery (0.08 s). Utilizing its anisotropic characteristics, a multidirectional self-powered strain sensor is developed, capable of distinguishing both the amplitude and direction of human motion, demonstrating strong potential for adaptive wearable electronics and intelligent motion monitoring.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4036-4
Alkaline water electrolysis is a pivotal technology for large-scale green hydrogen production, yet its efficiency is constrained by sluggish hydrogen evolution reaction (HER) kinetics at industrial current densities. Here, we propose a synergistic dual-doping strategy to lower kinetic barriers for both Volmer and Heyrovsky steps. A robust amorphous NiCoV nanosheet electrode was synthesized via scalable one-step electrodeposition. In situ spectroscopic and kinetic characterizations reveal that hydrophilic V species optimize interfacial water by disrupting the hydrogen bond network, ensuring rapid supply of free water at the inner Helmholtz plane. Co dopants modulate electronic structure to facilitate electron transfer and optimize intermediate adsorption energetics. The NiCoV electrode requires an ultralow overpotential of 253 mV at -400 mA cm−2, surpassing most Pt-based catalysts, and maintains stability for over 200 h. Industrial validation in a scaled-up electrolyzer demonstrates a cell voltage of 1.89 V at 400 mA cm−2, achieving energy savings of 0.12 kWh m−3 H2 compared to commercial benchmarks. This translates to annual electricity savings of 1.33 × 10^6 kWh for a medium-scale demonstration project, highlighting immense potential for sustainable industrial applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4052-0
Cutaneous wound infections affect millions of patients annually worldwide, and early diagnosis is critical for timely anti-infection treatment. Bacterial infections alter wound pH, offering a promising diagnostic approach. Here, a diagnostic smart dressing (CMC-PDBI) is developed by ultraviolet-initiated crosslinking of a pH-responsive indicator coating, incorporating modified bromothymol blue, onto a carboxymethyl cellulose substrate. The dressing exhibits superior pH-triggered color-changing performance in both phosphate buffer solution and bacterial cultures across the pH range associated with wound infection (orange at pH 6.0, green from pH 6.5 to 7.5, blue at pH 8.0). In a murine wound infection model, CMC-PDBI indicates infection two days before symptomatic manifestation. Early therapy guided by the dressing accelerates wound healing and reduces inflammation. A smartphone application (InfectSense) assists in identifying infection risk. This work presents a novel early-warning platform for qualitative visual diagnosis of wound infections before clinical symptom onset, with high potential for clinical and home care settings.