SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4350-4
Flexible wearable sensors have transformed motion tracking, soft robotics, and human-machine interfaces by enabling precise movement detection and adaptability to curved surfaces. However, conventional composite sensors often face challenges such as limited sensitivity, detection range, linearity, and durability. In this study, we propose a stretchable auxetic sensing textile with a negative Poisson’s ratio (NPR) structure, incorporating reduced graphene oxide (rGO) and carbon nanotubes (CNT) by micro-crack engineering to enhance its mechanical durability and sensing performance. Integrating macro-scale NPR with micro-scale wrinkles, this innovative design achieves a high sensitivity of 11.2 within a wide detection range (0-100%), a more linear sensing range with an R2 value of 0.998, an ultra-low detection limit of 0.5%, and exceptional durability, outperforming conventional wearable sensors. Additionally, the textile sensor boasts excellent moisture permeability (32.7 g m⁻² h⁻¹) and a remarkable NPR value of -0.25, ensuring comfort and adaptability for various wearable applications. Integrated with deep learning algorithms, the auxetic sensing textile demonstrates 98% accuracy in recognizing soft robotic movements at various bending angles. It is capable of capturing both small-scale physiological signals, such as electrocardiograms, and large-scale movements, offering significant freedom of movement and adaptability to complex surfaces.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4237-x
Silicon-based (Si-based) anodes are core candidates for next-generation high-energy solid-state batteries (SSBs) due to their high theoretical capacity (~4200 mAh g−1). However, their practical application is constrained by the 'size effect', which influences mechanical integrity and electrochemical performance. This review systematically examines the failure mechanisms of nano-silicon (nSi) and micro-silicon (mSi) anodes when paired with sulfide and organic-inorganic composite solid-state electrolytes (SSEs). Key functional parameters of these SSEs are discussed, along with strategies to mitigate interfacial impedance and accommodate volume changes. Recent progress in structural and interface modifications is highlighted, including the use of hard-carbon-stabilized Li–Si anodes (achieving stable cycling) and pressure-free operation. The review identifies core challenges, such as achieving intimate solid–solid contact and managing mechanical stress, and outlines future directions for 'size effect' regulation to accelerate commercialization of high-energy Si-based SSBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3759-7
The inherent strength-ductility trade-off in materials science poses a significant challenge for structural applications. In composites, rational regulation of reinforcement structure and distribution can enhance both strength and ductility. Typical structures such as network, layered, and columnar have proven effective, yet issues like narrow size ranges, uneven distribution, and weak interfacial bonding limit performance. Here, we present a bioinspired multi-scale heterogeneous layered composite (MHLC) that achieves an optimal balance between strength and ductility. This heterogeneous layered structure comprises alternately stacked Cu-Ti layers and GNPs/Cu layers. The Cu-Ti layer contains uniformly distributed plate-like β-Cu4Ti intermetallic compounds, while the GNPs/Cu layer contains layered graphene nanoplatelets (GNPs). The size, distribution, and shape of reinforcements can be adjusted through heat treatment and cold rolling, enabling a balance between strength and ductility. Molecular dynamics simulation and finite element simulation were conducted to investigate the structural evolution of β-Cu4Ti and the influence of reinforcements on tensile properties, respectively. Results show that under tensile deformation, high-strain regions in the Cu-Ti layer are more numerous than in the GNPs/Cu layer. At an applied strain of 7.96%, fracture and deformation of reinforcements occur; at 23.98%, voids appear and develop into cracks. Cracks propagate along high-strain paths, forming a zigzag fracture pattern at the interface, indicating high interfacial bonding strength. The bending deformation of β-Cu4Ti suggests it possesses high hardness, strength, and excellent toughness. Our results provide important references for exploring multi-scale heterogeneous layered structures in enhancing strength and ductility of composites.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506019
Acidic in-situ leaching of sandstone-type uranium deposits leaves residual acid and uranium in groundwater, posing environmental risks. This study investigated the feasibility of loading hydroxyapatite (HAP) onto aquifer sandstone particles for in-situ remediation. Sandstone particles were collected from an aquifer and reacted with a HAP-generating solution for 52 days to produce sandstone/HAP composite. Batch experiments examined the effects of initial pH, initial uranium concentration, composite dosage, and interfering ions on uranium removal. Results showed successful HAP loading on sandstone surfaces. At initial pH 3, uranium concentration 5 mg/L, composite dosage 3 g/L, and 24 h reaction, uranium removal reached 95.6%. Interfering ions suppressed removal in the order Fe3+ > Mn2+ > Ca2+ > Mg2+ > SO4^2-. Removal mechanisms included electrostatic adsorption, ion exchange, and dissolution-reprecipitation, with good stability of immobilized uranium. This work validates the concept of in-situ HAP loading in aquifers and provides a basis for practical application in acidic uranium-contaminated groundwater remediation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024121201
A method for the simultaneous determination of 19 sulfonamide antibiotics in environmental aqueous samples was developed by integrating solid-phase extraction (SPE) and gel permeation chromatography (GPC) with ultra-performance liquid chromatography–triple quadrupole mass spectrometry (UPLC-MS/MS). Aqueous samples were filtered through 0.45 μm membranes, adjusted to pH 6, and treated with Na2EDTA at 2.5 mg·L−1 to mitigate matrix effects. Analytes were enriched on Oasis HLB cartridges, purified by GPC, and separated on a Hypersil GOLD C18 column (2.1 mm ID × 100 mm, 1.9 μm) using gradient elution with 0.05% (V/V) formic acid in water and methanol. Detection was performed in multiple reaction monitoring (MRM) mode with internal standard quantification. Under optimal conditions, limits of detection (LOD) and quantification (LOQ) ranged from 0.7–4.4 ng·L−1 and 2.8–17.6 ng·L−1, respectively. Recoveries from spiked real samples at 10, 200, and 400 ng·L−1 were 44.5%–102%, 47.7%–97.5%, and 51.4%–115%, with relative standard deviations (RSDs) of 1.8%–10%, 0.64%–5.9%, and 0.71%–4.6%, respectively. The method was applied to three surface waters and three municipal wastewater treatment plant effluents, detecting five sulfonamides at concentrations ranging from 1.82 to 3864 ng·L−1. The combined SPE-GPC cleanup effectively reduced matrix suppression, offering high sensitivity, precision, and robustness for routine monitoring of sulfonamide antibiotics in environmental waters.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604018
To address the issues of high air volume and unorganized emissions of waste gas in semi-steel vulcanization production lines, a combined approach of experimental testing and numerical simulation was employed to study the diffusion characteristics of VOCs-containing waste gas and the air volume of the collection system. The structure of the semi-enclosed hood was optimized, and pipe diameters were adjusted to achieve negative pressure balance, enabling efficient waste gas collection. Results showed that toluene concentration distributions from numerical simulation were largely consistent with experimental measurements, with a maximum average error of -3.9%. Existing hood inlet wind speeds ranged from 0.04 to 0.2 m/s, indicating uneven distribution. Under calm wind conditions, toluene diffusion in enclosed and semi-enclosed hoods was similar, with concentrations of 248 mg/m³ and 115 mg/m³, respectively, and deposition observed in trenches. For a single vulcanizer, at a design air volume of 2700 m³/h, the enclosed hood achieved a toluene concentration of 80 mg/m³ versus 63 mg/m³ for the semi-enclosed hood, demonstrating superior capture of hot fumes. Optimizing the semi-enclosed hood with soft curtains and a height of 1200 mm, at a total design air volume of 1.0×10⁵ m³/h, yielded an average hood inlet velocity of 0.35 m/s but still uneven distribution. Adding 900 mm gradual reducers and adjusting branch pipe diameters resulted in total air volume deviations of -0.44% and 0.38% for branches I and II, respectively, with individual hood deviations below 10%. This achieved negative pressure balance, effective collection, and improved workshop hygiene.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60616-5
CuZnAl (CZA) is a classic industrial catalyst for methanol synthesis from syngas, but its catalytic performance for CO2 hydrogenation to methanol is suboptimal. The catalytic mechanism of Cu species in CZA remains challenging. This study systematically investigates the valence state changes of active Cu species in CZA catalysts and their influence on catalytic performance by modifying catalysts with varying amounts of electron donor K, thereby identifying the catalytic function of Cu species with different valence states. H2-TPR, XPS, and HR-TEM characterizations reveal that highly dispersed K species supported on CZA catalysts inhibit the reduction of CuO, resulting in a small amount of Cu2O active species being produced under reaction conditions, thus causing a decrease in catalytic activity. Furthermore, XRD and Cu LMM spectra show that the proportion of Cu0 in K-modified CZA catalysts increases with K loading, but a higher proportion of Cu0 species on the surface obviously promotes the reverse water gas shift (RWGS) reaction. According to the results of in situ infrared spectroscopy, CZA catalyst follows the reaction pathway mediated by HCOO* in the hydrogenation of CO2 to methanol.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0029
Pingshuo coal ash, characterized by high silicon-aluminum content (Si+Al >85%) and low Si/Al ratio (<1.5), exhibits ash fusion temperatures (AFTs) exceeding 1550 °C, rendering it unsuitable for entrained-flow gasifiers. This study investigates the effect of calcium-sodium composite flux on ash fusibility and mineral transformation. X-ray diffraction (XRD) and FactSage thermodynamic simulations were employed to analyze mineral evolution, while molecular dynamics (MD) simulations revealed the underlying melting mechanism. Results show that adding 20% composite flux (CaO/Na2O) lowers AFTs more effectively than equivalent additions of CaO or Na2O alone, indicating a synergistic effect. At a CaO/Na2O ratio of 3:7, the flow temperatures (FT) of two Pingshuo coal ashes decreased to 1377 °C and 1279 °C, respectively. The composite flux promotes reactions between quartz and Na2O/CaO, forming low-melting-point minerals such as nepheline, albite, and gehlenite, while inhibiting mullite formation. Additionally, Na+ disrupts the silicate network, inducing Ca2+ to preferentially coordinate with [AlO4]5- tetrahedra, further breaking Si-O-Si bonds. MD simulations show that atomic diffusion, quantified by mean square displacement (MSD), is significantly enhanced below 1600 K with composite flux addition compared to single fluxes. These findings provide a mechanistic basis for optimizing flux formulations to enable efficient gasification of high-AFT coals.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606003
Membrane separation technology, offering high separation efficiency, low energy consumption, and operational flexibility, is promising for lithium recovery. However, selective lithium extraction from complex matrices such as salt lake brines and battery leachates remains challenging. Traditional membrane development relies on empirical trial-and-error, suffering from low efficiency and the permeability-selectivity trade-off. This review systematically delineates machine learning (ML)-based frameworks for membrane material development, including high-throughput rational screening, inverse design of synthesis protocols, and high-fidelity performance prediction. We elucidate how advanced ML algorithms decipher structure-activity relationships at the molecular level, enabling breakthroughs in performance ceilings and guiding bottom-up fabrication of next-generation membranes. Critical challenges are assessed: scarcity of high-quality standardized datasets, limited model interpretability, and poor generalizability to industrial scales. Future directions emphasize physics-informed hybrid models, open-source global databases, and full-process system optimization to bridge laboratory innovation and industrial deployment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3810-y
Amorphous metal-organic frameworks (aMOFs), with abundant defects and unsaturated coordination sites, are ideal precursors for investigating electrocatalytic reconstruction mechanisms. However, systematic understanding of how different modulation strategies affect reconstruction pathways and final active species remains lacking. Here, an amorphous MOF constructed from 3,4,9,10-pyrene-tetracarboxylic acid (PTA) serves as a controllable precursor to compare doping and alloying effects on structural reconstruction and oxygen evolution reaction (OER) performance. Doping promotes preferential reconstruction into Fe-rich (oxy)hydroxides with more exposed active sites, whereas alloying yields Fe-Co mixed (oxy)hydroxides with limited site exposure. The doped system FeCo0.05-PTA exhibits outstanding OER activity in alkaline conditions, with overpotentials of 208 and 248 mV at 50 and 100 mA cm−2, respectively, and a low Tafel slope of 36.2 mV dec−1. In situ Fourier transform infrared spectroscopy (FTIR) captures the OOH* intermediate, confirming the adsorbate evolution mechanism. Density functional theory (DFT) calculations show the doped system has the lowest free-energy barrier (ΔG = 0.59 eV) at the rate-determining step. This study underscores the decisive role of precursor design, elucidates distinct effects of doping and alloying on reconstruction pathways and final properties of amorphous MOF-derived (oxy)hydroxides, and provides insights for designing related electrocatalysts.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040102
Calcium peroxide (CaO2) with a rich porous structure was synthesized via chemical precipitation for efficient fluoride removal from aqueous solutions. The adsorbent was characterized by SEM, BET, LPSA, and XRD, revealing a mesoporous material with a total pore volume of 0.51 cm3·g−1. Batch experiments investigated the effects of adsorbent dosage, initial fluoride concentration, reaction time, pH, and coexisting anions. Adsorption kinetics followed a fractal-like pseudo-first-order model, with intraparticle diffusion as the rate-limiting step. Equilibrium data were well described by the Sips isotherm, predicting a maximum adsorption capacity of 479.8 mg·g−1. Site energy distribution analysis indicated a normal distribution with an average energy of 13.36 kJ·mol−1. Mechanistic studies using FTIR and XPS revealed that fluoride removal proceeds via surface precipitation, ligand exchange, and electrostatic attraction. The high density of active sites contributes to the exceptional defluoridation performance, positioning CaO2 as a promising adsorbent for fluoride-contaminated water treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3999-x
The integration of photochromism (PhCh) and persistent luminescence (PersL) into a single material remains a formidable challenge due to the complex role of defects in modulating optical properties. Here, we employ structurally simple CsX (X = Cl, Br) nanocrystals (NCs) as a model system to elucidate the relationship between defects and optical behaviors. We demonstrate that CsX NCs accommodate two distinct types of chlorine vacancy defects upon X-ray irradiation: intrinsic vacancies from synthesis and X-ray-induced vacancies. This dual-defect engineering enables reversible blue coloration under X-ray irradiation (20–70 kV), attributed to recoverable chlorine vacancies that are rapidly eliminated by visible light within 30 s. The photochromic behavior exhibits excellent cycling stability with a color difference (ΔRL1) of 56.9% and a recovery rate (ΔRL2) of 98.1%. Furthermore, Br− incorporation deepens the energy level of intrinsic chlorine vacancies from 0.47–0.71 eV to 0.83 eV, resulting in intense persistent luminescence lasting over 30 minutes. These dual-mode PhCh–PersL characteristics position CsX NCs as promising candidates for X-ray colorimetric imaging and dynamic anti-counterfeiting applications. Our findings establish a defect-oriented design principle extendable to other halide systems, advancing the development of multifunctional photonic materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4070-2
A series of ~20 nm intermetallic Pd3Pb nanocubes with tunable surface Pb exposure were synthesized via a facile one-step solvothermal approach, providing an ideal system to investigate the way in which the surface configurations of Pb-rich (Pd3Pb/Pb), Pd-rich (Pd3Pb/Pd), and standard Pd3Pb nanocubes influence the CO2 reduction reaction (CO2RR) mainly through the ligand effect while excluding geometric influences. Electrochemical measurement results indicate that the Pd3Pb/Pb catalyst delivered outstanding C1+ selectivity, achieving a high Faradaic efficiency of 96.88% at −0.72 V (vs. RHE), significantly outperforming the Pd3Pb/Pd (39.86%) and standard Pd3Pb (81.75%) counterparts. In situ FTIR together with DFT calculations further elucidated that Pb incorporation can modulate the electronic structure of Pd via p-d hybridization, leading to the upshift of the d-band center. This will, in return, strengthen the intermediate adsorption ability and lower the energy barriers of the C1+ pathways while effectively suppressing the competing hydrogen evolution reaction. This work establishes a precise surface engineering paradigm of intermetallic nanocrystals for designing high-performance electrocatalysts.