SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4343-7
Piezoelectric materials interconvert mechanical and electrical energy, but piezoceramics are brittle while PVDF-based ferroelectric polymers exhibit low piezoelectric coefficients (d33 ≈ -30 pC N-1). Chemical modification via morphotropic phase boundary (MPB) engineering has raised d33 in P(VDF-TrFE) to -63.5 pC N-1, and to -69 pC N-1 with stretching, but intrinsic piezoelectricity in relaxor terpolymers remains limited. Here, relaxor ferroelectric P(VDF-TrFE-CFE) with varying C=C double bond (DB) content is synthesized via dehydrochlorination. Structural and electrical characterization reveals that increasing DB content stabilizes long-range ferroelectric order while suppressing short-range relaxor characteristics, forming a trans/helix phase boundary. At a critical DB content of 2.0 mol%, a markedly enhanced intrinsic d33 of -129.0 pC N-1 is achieved, outperforming previous MPB approaches. This finding addresses the fundamental bottleneck of low piezoelectric response in flexible ferroelectric polymers and provides a viable route for high-performance wearable electromechanical devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4351-8
Breaking intrinsic structural symmetry is a fundamental prerequisite for pronounced nonlinear optical responses. Low-symmetry semiconductors with inherent anisotropy enable self-powered optoelectronic conversion and polarization-sensitive functionalities. This work reports the synthesis of low-dimensional van der Waals chain TeSe2 crystals with intrinsic inversion and C3 symmetry breaking. Angle-resolved polarized Raman spectroscopy and second-harmonic generation measurements confirm crystalline anisotropy and nonlinear optical performance. Electrical transport studies reveal p-type conduction with a room-temperature field-effect mobility of 122 cm2 V-1 s-1. The TeSe2 photodetector achieves self-powered detection and linearly polarized light detection across 405–1064 nm, with a photoresponsivity of 77.3 mA/W at 532 nm. The linear photogalvanic effect response is effectively modulated by gate voltage. Density functional theory calculations attribute p-type doping to Te and Se vacancies, while the nonlinear optical origin is linked to strong Berry curvature. Applications in polarization encoding communication and polarization imaging are demonstrated, indicating potential for low-energy-consuming, highly sensitive, on-chip integrated linear polarized photodetectors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4315-2
High-temperature X-ray imaging demands scintillators with high crystallinity, efficient scintillation, and robust thermal stability, yet suitable materials remain scarce. Here, we report an ultra-high-crystallinity transparent glass-ceramic (GC) scintillator strategically designed via controllable heat-treatment-induced crystallization. A sequential precipitation method is employed, where cubic CaF2 nanocrystals initially form, subsequently promoting heterogeneous nucleation and growth of hexagonal BaAl2Si2O8. Intrinsic nanoscale phase separation into F-rich and O-rich domains significantly reduces atomic diffusion distances, yielding an unprecedented crystallinity of up to 97.6%. Notably, defect traps (oxygen vacancy defects, likely located within the lattice or at crystalline/amorphous interfaces) enable efficient carrier capture and thermally stimulated release, contributing to remarkable resistance to thermal quenching. Consequently, the GC scintillator maintains 90.6% of its integrated X-ray excited luminescence (XEL) intensity at 300 °C, with the integrated XEL intensity reaching 94.2% of commercial Bi4Ge3O12 (BGO) at room temperature. This enables stable high-temperature X-ray imaging with a spatial resolution of ~10.4 lp mm−1 up to 225 °C. This work provides a versatile pathway for developing high-sensitivity scintillators for extreme-environment X-ray imaging.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509078
The rapid expansion of photovoltaic (PV) installations and the impending retirement of early-stage modules have made the recycling of end-of-life PV modules an urgent issue. This review systematically examines the types and structures of retired PV modules, with a focus on crystalline silicon (c-Si) and thin-film technologies. It critically evaluates the principles, processes, and pros and cons of physical, chemical, pyrolysis, biological, combined, and emerging methods for recovering c-Si modules. The current status of silicon, metal, and valuable component recovery processes is summarized. For thin-film modules, the core technologies for recovering valuable components via pyrometallurgical, hydrometallurgical, biological, and novel approaches are analyzed in depth. Results indicate that conventional methods (physical, chemical, pyrolysis) remain dominant but suffer from high energy consumption, pollution, and chemical usage. Emerging technologies such as biological and green leaching are identified as key research directions, though they face challenges of low technical maturity and high costs. Finally, policy orientations and existing challenges are discussed, and future development directions are proposed, providing significant guidance for the sustainable and large-scale green development of the PV industry.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4061-5
The dynamic modulation of magnetic properties by external stimuli represents a paradigm shift in materials science, enabling non-contact, reversible control of spin states for applications in optical switching, sensing, and low-power spintronics. Prussian blue analogues (PBAs) are versatile platforms for photo-responsive magnetism, yet their photomagnetic response is highly sensitive to transition metal selection, alkali ions, vacancies, and water content, complicating targeted synthesis. Here, we introduce a generalizable strategy by incorporating the photo-responsive organic cation methyl viologen (MV2+) into PBA frameworks, yielding hybrids MVPB, MVPB-Co, and MVPB-Ni. Upon Xe lamp irradiation, MV2+ undergoes reduction to the radical cation MV+•, which acts as a spin carrier coupling to the magnetic moments of the metal ions. This mechanism decouples the photomagnetic response from the inorganic lattice, overcoming stoichiometric limitations. Irradiation leads to a substantial enhancement of magnetization, followed by partial relaxation under prolonged exposure, attributed to the generation and accumulation of MV+• radicals. These radicals function as dynamic magnetic modifiers, distinct from conventional light-induced charge transfer in PB frameworks. The approach is applicable across diverse cyanide-bridged metal pairs, irrespective of alkaline cations, vacancies, or water content, establishing a robust route for designing light-responsive magnetic materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040102
Calcium peroxide (CaO2) with a rich porous structure was synthesized via chemical precipitation for efficient fluoride removal from aqueous solutions. The adsorbent was characterized by SEM, BET, LPSA, and XRD, revealing a mesoporous material with a total pore volume of 0.51 cm3·g−1. Batch experiments investigated the effects of adsorbent dosage, initial fluoride concentration, reaction time, pH, and coexisting anions. Adsorption kinetics followed a fractal-like pseudo-first-order model, with intraparticle diffusion as the rate-limiting step. Equilibrium data were well described by the Sips isotherm, predicting a maximum adsorption capacity of 479.8 mg·g−1. Site energy distribution analysis indicated a normal distribution with an average energy of 13.36 kJ·mol−1. Mechanistic studies using FTIR and XPS revealed that fluoride removal proceeds via surface precipitation, ligand exchange, and electrostatic attraction. The high density of active sites contributes to the exceptional defluoridation performance, positioning CaO2 as a promising adsorbent for fluoride-contaminated water treatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4062-2
Metalloimmunology, an emerging interdisciplinary field, is reshaping our understanding of the immune system at an unprecedented pace. This review systematically elaborates on the core roles of metal ions as critical signaling molecules and metabolic regulators in both innate and adaptive immunity. Special focus is placed on the molecular mechanisms by which metal ions modulate key immune signaling pathways, as well as their mediation of novel immunogenic cell death modalities including ferroptosis, cuproptosis, and pyroptosis. Furthermore, we comprehensively review innovative metal ion-based therapeutic strategies, encompassing metal nanoadjuvants, metal-organic frameworks and nanozymes, along with their cutting-edge applications in cancer, infectious diseases, autoimmune disorders, and tissue repair. Finally, this review delves into the challenges faced by this field in targeted delivery, biosafety, and clinical translation, and provides an outlook on its future development directions with particular emphasis on the immense potential of precisely regulating metal homeostasis for the treatment of autoimmune diseases.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4118-0
Polymer composite dielectrics are key materials for high-temperature film capacitors, yet their energy storage capability is severely constrained at elevated temperatures. Molecular fillers that simultaneously integrate deep-level trapping (high electron affinity, Ea), strong insulation (large bandgap, Eg), and high thermal stability are rarely available, posing a major challenge for improving high-temperature energy storage performance. To address this challenge, we screen and identify hexaazatriphenylene hexacarbonitrile (HAT-CN) as a promising candidate that fulfills the above critical requirements from numerous commercial organic molecules. When incorporated into a high glass transition temperature (Tg) polymer fluorene polyester (FPE), the resulting all-organic composite exhibits simultaneously suppressed high-temperature conduction loss and preserved mechanical robustness. Consequently, the optimized composite achieves record-high discharged energy densities of 7.31 J cm−3 at 150 °C and 6.14 J cm−3 at 200 °C (η≥90%) with a low cost and scalable process. This work demonstrates that the filler design based on synergistic key properties provides a potent pathway to break the longstanding high-temperature performance bottleneck in polymer dielectrics.