SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3664-x
The proliferation of electronic devices and wireless communications has escalated the demand for materials that simultaneously provide electromagnetic interference (EMI) shielding and infrared (IR) thermal camouflage, a combination critical for military and civilian applications. Traditional metallic shields suffer from high density, poor processability, and cost, while polymer-based alternatives often lack sufficient shielding effectiveness and environmental stability. Here, we report a multilayer composite film fabricated via layer-by-layer vacuum filtration and hot-pressing, integrating modified aramid nanofibers (ANF) and MXene (Ti3C2Tx) nanosheets. The film architecture comprises ANF-polypyrrole (ANF-PPy) as the matrix and Ag-MXene as the functional filler, with in-situ grown Ag nanoparticles intercalating between MXene layers to enhance interlayer spacing and electromagnetic wave scattering. At a thickness of only 33 μm, the film achieves an average EMI shielding effectiveness (SE) of 66.75 dB and a specific shielding effectiveness (SSE/t) of 38432.54 dB cm2 g−1. The multilayer structure promotes multiple internal reflections and interfacial polarization losses, while the tight integration ensures high IR reflectivity. This work establishes a foundation for developing multifunctional protective materials with dual EMI shielding and IR camouflage capabilities, addressing the critical bottleneck of simultaneous performance in ultrathin, flexible formats.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3666-2
Light-emitting electrochemical cells (LECs) are promising for low-cost, solution-processed display and lighting applications, yet achieving high efficiency and color purity remains challenging. Here, we report two ionic multi-resonance (MR) emitters with narrowband blue emission for high-color-purity LECs. By covalently bonding an imidazolium functional group into a boron/nitrogen-doped polycyclic skeleton, the emitters retain the narrowband emission and high photoluminescence quantum yield (PLQY) of the MR core while gaining ionic character. The design exploits two types of nitrogen atoms in the imidazolium unit: the pyrrolic N at the 1-position forms a para-B-π-N linkage, elevating excited-state energy levels and blue-shifting emission; the pyridinic N at the 3-position provides a quaternization site, yielding intrinsically ionic emitters compatible with ionic hosts. The emitters exhibit blue emission with narrow full-width at half-maximum of 26–27 nm and high PLQYs of 95%–97% in solid-state films. LECs based on these emitters achieve narrowband blue electroluminescence with CIE coordinates of (0.12, 0.26) and a maximum external quantum efficiency (EQE) of 4.6%, representing the first narrowband blue LECs based on intrinsically ionic MR emitters. This work demonstrates a viable molecular design strategy for high-color-purity LECs, addressing the long-standing trade-off between efficiency and color purity in this technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3707-8
Wound infection is a major cause of death during the wound healing process. Improperly dressed wounds can lead to secondary injury, prolonging healing time and increasing infection risk. Here, we propose an antibacterial slippery dressing through molecular engineering of copper ions. The oil layer forms a barrier to reduce clot adhesion to the wound site and prevent environmental contamination. Single-cell level detection indicates that secreted copper ions induce bacterial death not only by disrupting membrane integrity but also by relying on the production of reactive oxygen species. Further membrane depolarization and adenosine triphosphate production blockage result in the aggregation of important proteins in various biological processes, such as metabolic homeostasis, ultimately leading to bacterial death. The animal model confirms that our dressing accelerates wound healing by promoting the growth of granulation tissue and collagen deposition. Our dressing demonstrates significant clinical implications for the design of next-generation therapeutic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3693-0
The development of catalysts with highly efficient oxygen evolution performance and low-Ir loading is key to scaling up the application of proton exchange membrane (PEM) water electrolysis technology. Here, an Ir-skin catalyst (Ir@KM) is realized on a potassium-manganese oxide (K0.25MnOx (KM)) using an ion-exchange method. The Ir-skin over the prepared Ir@KM has a low Ir–Ir atomic distance, endowing an energetically favorable oxide path mechanism to allow a low theoretical overpotential of 0.13 V. Ir@KM offers a low overpotential of ~280 mV at a current density of 10 mA cm−2 and provides a high mass activity of up to 18,500 A gIr−1 at a cell voltage of 1.8 V in PEM, which is 17.6 times higher than that of IrO2, demonstrating a significant advantage in reducing the cost of the membrane electrode. The presented Ir-skin concept represents a promising strategy to fabricate low-Ir catalyst with high activity and durability for practical applications of PEM.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112102
Based on the 2022 activity data of non-road mobile sources in Hebei Province, this study employed the emission factor method recommended by the Guidelines to estimate emissions of CO, HC, NOx, PM2.5, PM10, and SO2. A comprehensive emission inventory was established, followed by spatial and uncertainty analyses. Scenario analysis, aligned with the 14th Five-Year Plan policies, was used to project emissions for 2030. The results indicate that non-road mobile sources in Hebei emitted 76.1×10^3 t of CO, 20.6×10^3 t of HC, 164.0×10^3 t of NOx, 8.5×10^3 t of PM2.5, 9.0×10^3 t of PM10, and 2.4×10^3 t of SO2. Agricultural machinery was the dominant contributor to CO, HC, PM2.5, and PM10, accounting for over 60.0% of CO emissions. Railway locomotives were the primary source of NOx, contributing 50.9%. For SO2, agricultural machinery and railway locomotives contributed 39.0% and 44.4%, respectively. The highest emitting cities were Tangshan (21.3%), Shijiazhuang (15.7%), Cangzhou (11.6%), and Handan (11.6%). Ship emissions were concentrated in Tangshan Port; civil aviation emissions were mainly in Shijiazhuang, Tangshan, Qinhuangdao, and Handan; railway emissions were distributed in Shijiazhuang, Baoding, and Handan. Under the updated emission standard scenario, NOx and PM10 emissions in 2030 could be reduced by approximately 35.0%. The phase-out of old machinery yielded the largest reduction in CO (36.0%), while both electrification and phase-out scenarios significantly impacted HC emissions.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225204
Cobalt-doped silica aerogel (Co@Si-A) catalysts were synthesized via a one-step sol-gel method and applied for peroxymonosulfate (PMS) activation to degrade tetracycline (TC). The catalyst with 25 wt% cobalt doping (25Co@Si-A) exhibited superior catalytic performance, achieving 98.97% TC degradation within 30 min under specified conditions (TC 10 mg/L, 100 mL). Brunauer-Emmett-Teller (BET) analysis revealed a high specific surface area and well-developed porous architecture with nano-confined spaces. The 25Co@Si-A/PMS system demonstrated outstanding adaptability across a broad pH range (5–9), maintaining >95% degradation efficiency, and showed strong resistance to sulfate and nitrate ions. In real water matrices, degradation efficiency remained around 80%. After five consecutive cycles, the system retained 82.33% degradation efficiency, with cobalt ion leaching of only 23.7 μg/L in the first cycle, indicating excellent stability. Mechanistic studies using electron paramagnetic resonance (EPR), radical quenching, and probe compound tests confirmed a synergistic radical and non-radical pathway. The primary reactive species were sulfate radicals (SO4•−), hydroxyl radicals (•OH), and singlet oxygen (1O2), with contributions of 58.53%, 9.79%, and 31.68%, respectively. Electrochemical tests indicated that 25Co@Si-A exhibited superior charge transfer compared to Co3O4, attributed to the nano-confined effect of the silica aerogel, which enhanced Co(II)/Co(III) redox cycling and PMS activation. This research provides a promising strategy for utilizing silica aerogel-based catalysts in advanced oxidation processes for water treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606007
Cobalt-aluminum spinel metal oxides derived from hydrotalcite were synthesized via hydrothermal, coprecipitation, and sol-gel methods, and their catalytic performance for NO oxidation was systematically evaluated. Characterization by X-ray photoelectron spectroscopy (XPS), O2 temperature-programmed desorption (O2-TPD), H2 temperature-programmed reduction (H2-TPR), and Raman spectroscopy revealed that the synthesis method significantly influences the surface Co2+/Co3+ ratio, which in turn modulates the formation of surface oxygen vacancies. The hydrothermally synthesized catalyst (CoAlO-H) exhibited the highest density of surface oxygen vacancies, leading to enhanced adsorption and activation of gaseous oxygen and superior NO oxidation activity compared to coprecipitation (CoAlO-C) and sol-gel (CoAlO-S) counterparts. Mechanistic studies using NO-TPD, NO+O2-TPD, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) identified nitrates as key intermediates. Notably, CoAlO-C and CoAlO-S followed the Langmuir-Hinshelwood (L-H) mechanism, whereas CoAlO-H operated via both L-H and Mars-van Krevelen (MvK) mechanisms. The exceptional performance of CoAlO-H is attributed to its abundant surface oxygen vacancies, high surface oxygen mobility, and low decomposition temperature of reaction intermediates. These findings provide a rational basis for designing efficient non-precious metal catalysts for NO oxidation in diesel exhaust aftertreatment.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3794-0
Luminescent transparent display technology is widely used in emerging fields such as augmented reality glass, head-up vehicle display, and commercial retail windows. While electroluminescent display is well established, the photoluminescent transparent screen of full-color rendering ability remains elusive due to the severe crosstalk between emitters. Herein, a full-color transparent screen of an orthogonal red/green/blue (R/G/B) luminescence is reported. Lanthanide fluoride nanocrystals are used as the emitters, where the color is tuned by a deliberate choice of doping activators including Tb3+, Eu3+, and Tm3+. Polyvinyl alcohol, with an identical refractive index to nanocrystals, is employed as the host matrix, enabling a high transparency up to 86% in the visible region upon a high loading content (~78 wt%) of nanocrystals. It should be noted that the nanocrystals are embedded in separate monolayers before integration by a UV-selective absorber, i.e., epoxy resin, which absorbs 254-nm UV to block cross-excitation between Tb3+ and Eu3+ layers, providing an asymmetric luminescent property from both sides of the screen. In a proof-of-concept experiment, a full-color prototype is showcased in real time for its potential applications in advanced displays of immersive experience.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3851-3
Aqueous zinc-ion batteries (AZIBs) face critical challenges from zinc anode instability, including corrosion, hydrogen evolution reaction (HER), parasitic byproduct formation, and uncontrolled dendrite growth. To address these issues, we developed a multifunctional cerium-based metal-organic framework (Ce-MOF) coating for zinc anodes. The coating features an ordered porous structure and inherent properties that mitigate HER, suppress side reactions, and inhibit dendrite formation. Symmetric cells using Ce-MOF/Zn demonstrated exceptional cycling stability for over 2060 h at 0.5 mA cm−2 with a low hysteresis polarization of 26 mV. In full cells with an I2@AC cathode, the Ce-MOF/Zn||I2@AC achieved outstanding cycling stability of 28,550 cycles at 5 A g−1, with 91% capacity retention (109.6 mAh g−1). Through integrated characterization employing in-situ optical microscopy, ex-situ XRD, SEM, and DFT calculations, we elucidated the multifunctional mechanism: the Ce-MOF coating facilitates preferential (002)-oriented Zn deposition to suppress dendrites, reduces Zn2+ desolvation energy to enhance deposition kinetics, and modulates interfacial chemistry to mitigate HER and corrosion. This work establishes Ce-MOF coatings as a simple yet powerful strategy for developing high-performance zinc anodes, providing critical insights for advancing practical AZIB technologies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3769-2
Proton exchange membrane water electrolyzers (PEMWEs) are pivotal for sustainable hydrogen production, yet the corrosion-induced TiOx on porous transport layers (PTLs) introduces Schottky contact barriers and pinch-off effects, severely impeding charge transfer and efficiency. Here, a cost-effective MoIrOx coating via spray deposition and thermal treatment on Ti felts is proposed. The coating forms a conductive interlayer that establishes a Schottky barrier staircase, reducing the effective electron transfer barrier and isolating TiOx from the ionomer to mitigate the pinch-off effect. The optimal PTL achieves a current density of 3.27 A cm−2 at 2 V, surpassing uncoated Ti felts by 59.5%. The MoIrOx interlayer suppresses localized electron accumulation at the interface, enabling stable operation with ultra-low catalyst loadings by preventing direct ionomer-TiOx contact. This work demonstrates a scalable strategy to enhance PEMWE efficiency and durability while minimizing precious metal reliance, offering critical insights into interface engineering for electrolyzers.