SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4244-0
Near-infrared perovskite light-emitting diodes (NIR-PeLEDs) suffer from poor operational stability, largely due to interfacial reactions at the electron-transport layer (ETL)/perovskite interface. Here, we introduce a zinc ion (Zn2+)-chelated hybrid ETL derived from a Zn2+-chelated polyethylenimine ethoxylated (PEIE) complex, which partially retains the surface properties of ZnO but exhibits significantly reduced oxygen defects and surface-adsorbed hydroxyl groups. This well-modulated surface promotes perovskite crystallization and mitigates interface-induced deprotonation of organic cations during device operation. Consequently, NIR-PeLEDs employing this hybrid ETL achieve a peak external quantum efficiency (EQE) of 20.1%, a high radiance of 652 W sr-1 m-2, and an exceptional T50 lifetime of 270.7 hours at a high current density of 100 mA cm-2, which is over five times that of devices based on conventional ZnO nanocrystal (NC) ETLs. Our results present an effective ETL strategy for operationally stable NIR-PeLEDs and thoroughly reveal the critical role of regulating interfacial reactions in stabilizing buried interfacial contacts. These findings provide valuable insights for advancing perovskite optoelectronic devices that suffer from interface-induced performance degradation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3635-6
Oxygen anionic redox (OAR) is pivotal for achieving extra lithium storage in high-energy-density Li-ion batteries, yet its activation and stabilization remain challenging. Traditionally, OAR is studied in crystalline layered oxides with ordered frameworks and transition metal (TM)-centered octahedral coordination, where the Li-O-Li configuration is considered a prerequisite for creating unhybridized O 2p states. However, recent findings indicate that the presence of unhybridized O 2p states, rather than a specific configuration, is essential for oxygen activation. This study reports a novel OAR mechanism in an amorphous Li-V-O-F cathode, operating at a moderate voltage of 4.1 V, distinct from conventional Li-O-Li configurations. The cathode, initially crystalline LiVO2.98F0.02 (F2), undergoes amorphization after the first charge-discharge cycle, as evidenced by ex situ XRD, HRTEM, and EXAFS. Resonant inelastic X-ray scattering (RIXS) and X-ray absorption spectroscopy (XAS) reveal that the initial charge involves O-O formal redox without oxidized oxygen features, indicating electron holes are accommodated via O-O interactions. Reversible OAR activity emerges in the second cycle, confirming O-O dimerization in the amorphous phase. Ab initio molecular dynamics (AIMD) simulations further elucidate the mechanism. This work challenges the conventional Li-O-Li paradigm and opens new avenues for designing high-capacity cathode materials through amorphization and tetrahedral coordination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3677-9
The demand for high-performance scintillators in high-temperature applications, such as industrial flaw detection and oil exploration, necessitates materials with both high efficiency and thermal robustness. This work reports Tb3+-doped oxyfluoride glass scintillators exhibiting anti-thermal-quenching radioluminescence (RL). Three synergistic strategies were employed: (i) an oxyfluoride glass host providing a low-phonon-energy environment, (ii) increased structural densification of the glass network, and (iii) thermally enhanced energy transfer from Ce3+ to Tb3+. The resulting scintillators achieve an optical transmittance exceeding 88% at 542 nm, a record RL intensity of 350% relative to a standard Bi4Ge3O12 (BGO) crystal, and an imaging resolution of 24 lp mm−1. Notably, the RL intensity at 633 K reaches 143% of its room-temperature (303 K) value, demonstrating significant anti-thermal-quenching behavior. In contrast, commercial BGO and CsI:Tl scintillators exhibit RL intensities dropping to approximately 1% under identical conditions. These results establish the potential of Tb3+-doped glass scintillators for high-temperature X-ray imaging and provide a strategic framework for developing thermally robust scintillating materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3705-5
Biodegradable metals (BMs) are designed to corrode gradually in physiological environments, yet this corrosion can compromise their mechanical integrity, potentially causing premature implant failure. For emerging zinc-based alloys, the corrosion-mechanical property relationship remains inadequately characterized. This study systematically investigated the long-term corrosion-associated mechanical behavior of hot-extruded Zn-Cu and Zn-Cu-Fe alloys, promising Zn-based bio-metals, in comparison with pure Zn, under immersion degradation in Hank's solution. Electrochemical impedance spectroscopy and mechanical testing revealed that the evolving corrosion profile governs mechanical performance. Alloying with Cu and Fe mitigated corrosion's detrimental effects: grain refinement reduced localized corrosion susceptibility, while finely dispersed second phases acted as cathodic sites, promoting uniform corrosion. Additionally, Cu and Fe facilitated the formation of protective corrosion product layers, suppressing further matrix attack. Consequently, the overall reduced corrosion, particularly localized corrosion, lowered stress concentration susceptibility, delaying mechanical decline and preserving structural integrity. These findings elucidate the degradation-mechanical property correlation in Zn-based bio-metals and underscore critical considerations for developing new bio-metals for clinical translation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202506019
Acidic in-situ leaching of sandstone-type uranium deposits leaves residual acid and uranium in groundwater, posing environmental risks. This study investigated the feasibility of loading hydroxyapatite (HAP) onto aquifer sandstone particles for in-situ remediation. Sandstone particles were collected from an aquifer and reacted with a HAP-generating solution for 52 days to produce sandstone/HAP composite. Batch experiments examined the effects of initial pH, initial uranium concentration, composite dosage, and interfering ions on uranium removal. Results showed successful HAP loading on sandstone surfaces. At initial pH 3, uranium concentration 5 mg/L, composite dosage 3 g/L, and 24 h reaction, uranium removal reached 95.6%. Interfering ions suppressed removal in the order Fe3+ > Mn2+ > Ca2+ > Mg2+ > SO4^2-. Removal mechanisms included electrostatic adsorption, ion exchange, and dissolution-reprecipitation, with good stability of immobilized uranium. This work validates the concept of in-situ HAP loading in aquifers and provides a basis for practical application in acidic uranium-contaminated groundwater remediation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025112601
The pervasive presence of tetracycline (TC) in aquatic environments poses significant ecological and public health risks. This study reports the synthesis of MIL-101-Bim, a covalently modified metal-organic framework (MOF), via a pre-modification strategy that introduces formyl groups into the MIL-101(Cr) framework (MIL-101-CHO), followed by Schiff base condensation and NaBH4 reduction to graft benzimidazole moieties. Powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) confirmed retention of the parent MIL-101(Cr) topology. Fourier-transform infrared (FT-IR) spectroscopy verified successful functionalization. 1H NMR analysis of digested MIL-101-Bim revealed a benzimidazole modification degree of 41%, with 32% of formyl groups reduced to hydroxymethyl and 27% remaining unreacted. Thermogravimetric analysis (TGA) demonstrated good thermal stability. Nitrogen adsorption-desorption measurements showed a specific surface area of 1361 m2·g−1 and pore sizes ranging from 1 to 2.3 nm. Adsorption kinetics for TC on both materials followed a pseudo-second-order model, and isotherm data fitted the Langmuir model. The theoretical maximum adsorption capacity of MIL-101-Bim for TC was 86.31 mg·g−1, significantly higher than that of MIL-101-CHO (39.56 mg·g−1). Zeta potential measurements indicated optimal adsorption performance at pH 5–8. X-ray photoelectron spectroscopy (XPS) provided evidence of hydrogen bond formation during adsorption. The adsorption mechanism involves both physical adsorption (pore filling, electrostatic interactions, π-π stacking) and chemical adsorption (weak hydrogen bonding). Regeneration studies showed that MIL-101-Bim retained an adsorption capacity of 46.93 mg·g−1 after five cycles, demonstrating promising reusability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3799-4
Li-rich layered oxides (LLOs) xLi2MnO3·(1−x)LiTMO2 (0 < x < 1, TM = Mn, Ni, Co, etc.) are promising high-energy cathode materials for lithium-ion batteries, capable of achieving energy densities up to 1000 Wh kg−1. However, their practical application is hindered by limited cycle life and voltage decay, primarily stemming from structural instability of Li2MnO3 and LiTMO2 domains during cycling, which manifests as transition metal cation migration, oxygen release, and TM dissolution. This review establishes a comprehensive design and modification scheme based on the fundamental structural unit of LLOs: the LiMn6 hexatomic-ring. In this unit, each Li atom in the TM layer is surrounded by six Mn atoms, forming a π-type hybridization between Mn 3d(t2g) and O 2p orbitals, creating an intact π-bond ring that acts as a distributed redox center. Ordering these functional units into specific spatial configurations can enhance capacity, voltage, and structural stability. However, substituting Mn with other elements breaks the symmetry of the π-bond ring, altering redox behavior and reversibility. The spatial arrangement of LiMn6 rings, representing the arrangement of π-bond rings, is critical for redox activity. In Li2MnO3, the typical honeycomb superstructure of LiMn6 rings is discussed. This review highlights the importance of functional unit ordering in material design, drawing parallels from other systems, and proposes a systematic approach to engineer LLOs for improved electrochemical performance.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3809-y
The development of hydrogels that simultaneously achieve high strength and good toughness remains a critical challenge in soft material science, particularly for applications in flexible electronics, soft robotics, and biomedical devices. Conventional approaches often suffer from a trade-off between mechanical robustness and functional performance. In this work, we present a novel solvent-driven dual-network entanglement strategy to fabricate a strong and tough poly(vinyl alcohol) (PVA)-based organo-hydrogel by synergistically combining isopropanol (IPA) solvent substitution to induce dense polymer chain entanglement and a sodium alginate (SA) ionic crosslinked network as a dynamic energy-dissipation phase. The resulting organo-hydrogel exhibits excellent mechanical performance with a tensile strength of 3.18 MPa and a toughness of 16.65 MJ/m3, representing increases of approximately 17 and 49 times that of conventional PVA hydrogels, respectively. Furthermore, the organo-hydrogel displays superior swelling resistance and long-term stability in aqueous environments, enabling reliable operation in challenging conditions such as underwater motion sensing and wearable strain detection. Morphological analyses reveal the critical role of solvent-mediated chain reorganization and dual-network interactions in achieving these properties. This work not only provides a versatile platform for designing robust gel materials but also offers fundamental insights into solvent-network interactions for advanced soft material engineering.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032801
A highly sensitive and accurate method using liquid-liquid extraction (LLE) coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed for simultaneous quantification of nine neonicotinoid insecticides and their metabolites in human urine and serum. Samples underwent enzymatic hydrolysis followed by ethyl acetate extraction, effectively enriching target analytes. Gradient elution and optimized mass spectrometry conditions enabled simultaneous determination. The method exhibited excellent linearity with correlation coefficients >0.999. In urine, limits of detection (LOD) ranged from 0.001 to 0.010 μg·L−1 and limits of quantification (LOQ) from 0.004 to 0.035 μg·L−1. In serum, LODs were 0.0004–0.02 μg·L−1 and LOQs 0.0014–0.07 μg·L−1. Average spiked recoveries were 89.3%–115.0% in urine and 83.0%–115.0% in serum, with relative standard deviations (RSD) of 0.5%–8.0% and 2.5%–9.5%, respectively. Analysis of paired urine and serum samples from 123 Guangzhou residents revealed detection rates of 94.3%–100% for the nine analytes in urine, with clothianidin showing the highest median concentration (1.89 μg·L−1). In serum, detection rates for clothianidin, thiacloprid, acetamiprid, imidacloprid-olefin, and 5-hydroxy-imidacloprid were below 60%, while the remaining four analytes ranged from 74.8% to 99.2%. Urinary concentrations of all nine analytes were significantly higher than serum concentrations (P<0.05). Significant positive correlations between urine and serum concentrations were observed for clothianidin, thiamethoxam, imidacloprid, and N-desmethyl-acetamiprid, with N-desmethyl-acetamiprid showing the strongest correlation. The LLE-UPLC-MS/MS method efficiently and accurately detects neonicotinoids and metabolites in urine and serum, providing a reliable tool for human exposure assessment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510044
The efficient treatment of sulfur-containing volatile organic compounds (S-VOCs) has become a critical task for air pollution control and green low-carbon transition under China's 14th Five-Year Plan. Industrial emissions often contain multiple S-VOC species, whose interactions can complicate degradation pathways, generate uncontrollable byproducts, and deactivate catalysts, limiting practical application. This review systematically summarizes the past decade of research on catalytic degradation of thiols and thioethers in multi-pollutant systems, focusing on competitive adsorption mechanisms, interfacial reaction pathways, and environmental factor regulation. Performance differences and reaction mechanisms across various catalyst systems under coexisting S-VOCs and inorganic sulfur are compared. Key findings indicate that mixed thiol systems exhibit faster deactivation than single-component systems due to temperature-dependent competitive adsorption and pathway switching, governed by molecular size–active site matching. Strategies such as metal–support strong interactions, zeolite confinement, nanocluster effects, and single-atom catalysts have improved activity and stability. However, dynamic competition mechanisms at active sites remain unresolved. Future research should develop atomic/molecular-level characterization techniques and multi-variable kinetic models, and shift from end-of-pipe purification to resource recovery, e.g., converting H2S and thiols into high-value chemicals like methanethiol, achieving dual goals of pollution control and sulfur resource recycling.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025051502
Contamination of indoor air with illicit drugs poses a serious threat to public health and safety. Accurate and precise methods for monitoring these drugs are crucial for combating drug production, trafficking, and abuse, as well as reducing the risk of occupational exposure in law enforcement and healthcare workers. Current on-site rapid detection techniques for drugs in indoor air primarily include ion mobility spectrometry and electronic nose technology. Chromatography-mass spectrometry techniques are often used in the laboratory. Monitored drug types include heroin, amphetamine-type stimulants, cannabis, cocaine, synthetic cannabinoids, and fentanyl analogs, with concentration ranges ranging from a few ng·m−3 to several hundred µg·m−3. Drug concentrations are influenced by factors such as the drug type, methods involved in production and abuse, intensities of human activity, and ventilation conditions. While it has been demonstrated that long-term exposure to drug-contaminated environments may cause persistent physical discomfort, the specific mechanisms underlying health risks require further investigation. This paper reviews the sources of illicit drugs in indoor air, their detection methods, and typical application scenarios. It also analyzes the shortcomings of existing studies and proposes future research directions. The aim is to provide technical references for the monitoring of drugs in indoor air environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4073-2
Precise control of molecular orientation in nonfullerene acceptors is crucial yet challenging for achieving both high efficiency and long-term stability in organic solar cells (OSCs). Here, we report a molecular dimerization strategy to regulate orientation and charge-transport anisotropy in ambipolar M-series acceptors. Using the edge-on-oriented small-molecule acceptor MC16 as a model, dimerization into DMC16 effectively suppresses over-aggregation and molecular diffusion while inducing a predominant face-on packing orientation. This orientation transition reverses the transport anisotropy from lateral to vertical directions, enabling balanced ambipolar charge transport and efficient carrier extraction. Consequently, DMC16-based OSCs exhibit a markedly enhanced power conversion efficiency together with outstanding thermal stability, retaining 94% of the initial efficiency after 1800 h at 85 °C and 74% after an additional 1000 h at 120 °C. When introduced as a third component in PM6:M36 ternary blends, DMC16 further optimizes blend morphology and stability, delivering an efficiency of 19.04% and over 15% in 10.15 cm2 modules. These results demonstrate that dimerization-induced molecular orientation control provides an effective pathway to simultaneously enhance efficiency, stability, and scalability in OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4093-8
Cyclohexanone oxime (CHO) is a pivotal feedstock for nylon-6 production, yet conventional synthesis routes suffer from high explosion risks, harsh conditions, and costly catalysts. Here, we report an electrocatalytic approach for CHO synthesis via reductive coupling of cyclohexanone (CYC) with nitrite over commercially available Bi2O3. A two-stage pulsed electrolysis protocol is employed: the first stage prepares amorphous Bi2O3, while the second stage produces CHO with a Faradaic efficiency (FE) of 74.63% and a yield rate of 0.156 mmol h−1 cm−2. Mechanistic studies, combining experiments and density functional theory (DFT) calculations, reveal that on amorphous Bi2O3, the *NOH intermediate preferentially undergoes hydrogenation to *NHOH and then *NH2OH, rather than the *NOH→*N pathway leading to NH3. This selectivity is attributed to the higher integral crystal orbital Hamilton population (ICOHP) for the N–O bond in *NOH on amorphous Bi2O3 (1.34 vs. 0.84 on amorphous Bi), indicating a weakened N–O bond that facilitates hydrodeoxygenation. Transition state calculations show a kinetic barrier of 0.86 eV for *NH2OH→*NH2, while desorption of *NH2OH to NH2OH is barrierless, favoring NH2OH release. This work provides a sustainable, efficient alternative to conventional CHO production, addressing safety and cost concerns while achieving high selectivity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4129-y
Therapeutic biosynthesis is a promising strategy for precision cancer therapy, yet achieving controlled synthesis of abiotic materials within tumors remains challenging. Here, we report a “dual lock-and-key” system for tumor-specific intracellular synthesis. The precursor, termed “dual-lock,” is activated by two endogenously overexpressed enzymes—azoreductase (AzoR) and nitroreductase (NTR)—acting as “dual keys” in target cancer cells. This activation triggers a condensation reaction that produces fibrous mesh covalent organic polymers (Fm-COPs) in situ. Synthesized Fm-COPs effectively disrupt the cytoskeleton, inhibiting cell migration and invasion while inducing apoptosis. In vivo studies demonstrate that this strategy achieves specific tumor enrichment and deep penetration, leading to significant tumor growth inhibition (tumor inhibition rate >70%) without systemic toxicity, as evidenced by stable body weights and normal histopathology. The dual enzyme-responsive mechanism ensures high selectivity, and the small-molecule precursors facilitate efficient tumor penetration. This work presents a next-generation approach for high-precision cancer therapy, offering a biocompatible and autonomous strategy for intracellular synthesis.