SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4468-6
The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4275-3
Electrochemical in-situ production of active chlorine (AC) via chlorine evolution reaction (CER) can alleviate hull corrosion and residual chlorine overage, which is a highly reliable disinfectant for sewage and ballast water. Nonetheless, the primarily competitive oxygen evolution reaction and gradual anode passivation hinder its practical application. Herein, we employed the in-situ hydrothermal strategy to synthesize Ru/TiO2-x to realize high activity and selectivity of CER. The robust interaction of Ru sites and TiO2-x achieved via a one-step hydrothermal synthesis strategy, the structural and valence state characterizations confirm that Ti3+ stabilizes Ru solely in the metallic state (Ru0) via structural confinement effects, effectively inhibiting catalyst oxidation. As a result, the Ru/TiO2-x requires only an overpotential of 33 mV to reach 10 mA cm−2, and possess strong catalytic durability, sustaining continuous operation for 100 h with negligible current decay. Further integration with a triboelectric nanogenerators successfully realizes the generation of AC, which demonstrates a >99.9% inactivation efficiency against Escherichia coli in simulated seawater environments, while also effectively degrading ammonia nitrogen and urea contaminants in domestic wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508004
Industrial processes generate substantial low-grade waste heat and cold, which can be harnessed via thermoelectric generators (TEGs) based on the Seebeck effect. However, the low-voltage output of TEGs poses application challenges. This study investigates a TEG-driven electrodeposition system for efficient treatment of low-concentration copper-containing wastewater from electroplating, integrated circuit, and energy industries. The TEG system, comprising two series-connected semiconductor modules, achieved a maximum power of 0.36 W at a temperature difference (ΔT) of 130 °C. Optimal operating parameters for the coupled system were determined: ΔT = 90 °C, counter-current flow (two-side inlet), flow rate of 20 mL·min⁻¹, initial Cu²⁺ concentration of 500 mg·L⁻¹, and electrode gap of 0.7 cm. Under these conditions, after 60 min of electrodeposition, copper removal efficiency reached 99.42%, current efficiency was 67.93%, and the energy conversion efficiency of the TEG-electrodeposition system was 36.96%. The system also treated real copper-containing wastewater, achieving 95.83% removal within 100 min. Characterization via SEM, XRD, and XPS revealed that the electrodeposited product consisted of metallic copper and cuprous oxide, with metallic copper accounting for approximately 60%. This work provides a promising approach for utilizing industrial waste heat and cold to achieve low-energy, high-efficiency treatment of heavy metal wastewater.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025101101
Acetamiprid, a representative neonicotinoid insecticide, persists in soil and water, posing ecological risks. This study evaluated its transgenerational toxicity in Caenorhabditis elegans exposed to 1, 10, and 100 μg·L−1. Direct exposure (F0) caused neurobehavioral abnormalities, with head swing frequency significantly increased by 23.86% even at 1.0 μg·L−1, correlating with disrupted acetylcholinesterase and γ-aminobutyric acid. Reproduction, development, metabolism, and intestinal barrier were impaired, with reactive oxygen species elevated by 30.42%–48.28%, indicating oxidative stress as a mechanism. Effects transmitted to unexposed T1–T3 generations: at 1.0 μg·L−1, body width inhibition persisted to T2; fat accumulation and intestinal permeability effects intensified with concentration. Among oxidative stress biomarkers, superoxide dismutase showed highest sensitivity and transgenerational persistence. This study reveals multidimensional transgenerational toxicity, informing soil ecological risk assessment of neonicotinoids.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225184
Thermal power units have long dominated China's energy structure due to the low cost of coal and their role in ensuring grid stability. However, under the dual pressures of climate change and national carbon peaking/neutrality goals, the environmental impact of their 'three wastes' has become critical, necessitating energy-saving retrofits. This review systematically examines mainstream energy-saving technologies for thermal power units, including boiler combustion optimization, heating surface cleaning, turbine flow path upgrades, waste heat recovery and cascade utilization, and cold-end system optimization. Using coal consumption rate as the core economic index, the study integrates case studies and operational data from typical domestic and international units to evaluate the latest progress, practical effects, advantages, and limitations of each technology. Results indicate that these technologies significantly improve energy efficiency and reduce pollution. For instance, boiler combustion optimization based on support vector machines and neural networks enhances thermal efficiency and reduces NOx emissions. Turbine flow path modifications, from full three-dimensional CFD optimization to advanced blades and combined steam seals, yield notable gains in cylinder efficiency and heat rate reduction. Low-temperature economizers reduce coal consumption and auxiliary power/water use in dust removal and desulfurization systems. Heat pump applications include absorption, compression, and hybrid types. In cold-end optimization, data-driven predictive maintenance and real-time performance tuning of condensers achieve nearly 50% energy savings in circulating water pumps and an average coal consumption reduction of 2-3 g/(kW·h). Despite these advances, gaps remain in multi-objective optimization robustness, intelligent diagnosis, and advanced materials. Future research should focus on deep reinforcement learning for adaptive control, sensor networks for real-time diagnostics and predictive maintenance, and high-temperature corrosion-resistant materials for heat exchangers, while balancing initial investment and maintenance costs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508021
Coal chemical industry waste salt, generated from high-salinity wastewater treatment, poses a bottleneck for green transformation under the 'dual carbon' strategy due to its low value and high complexity. This study investigated a typical coal chemical industrial park in Northwest China, using principal component analysis (PCA) on actual waste salt samples to identify pollutant characteristics and assess resource utilization potential. Results showed total organic carbon (TOC) ranged from 707.9 to 7,737.9 mg·kg⁻¹, with benzo(a)pyrene concentrations frequently exceeding the limits of the 'Identification Standards for Hazardous Wastes' (GB 5085.3). Hardness ions and metal ions also surpassed relevant product standards. PCA classified the waste salts into three types: sodium sulfate type, sodium chloride type, and high-complexity mixed salt, each corresponding to distinct resource utilization pathways. The study proposes differentiated technical routes based on PCA classification, providing a feasible reference for classified management and technology selection. This research supports the national policy of 'harmless pretreatment + resource utilization' for waste salt, contributing to green and high-quality development of the coal chemical industry.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010803
Global aquaculture is expanding rapidly, with China leading in production and being the only country where aquaculture output exceeds wild catch. This growth raises concerns about environmental contamination, particularly mercury (Hg), and the safety of aquaculture products. This study investigated Hg accumulation and trophic transfer in a typical ecological mariculture area in Tangshan, Hebei Province, by measuring species-specific Hg concentrations in sediments and various aquatic organisms. Sediment total mercury (THg) levels were extremely low, averaging 4.0 ± 1.3 ng·g−1 dry weight (n=56), attributed to sandy/silty sediments with low adsorption capacity and minimal external/internal Hg inputs. In aquaculture fish, muscle THg and methylmercury (MeHg) concentrations were 59.7 ± 30.0 and 53.8 ± 29.2 ng·g−1 wet weight (n=7), respectively, comparable to wild fish from the same area. This is due to efficient trophic transfer and biomagnification of Hg, especially MeHg, along the food chain, influenced by food chain structure, primary consumer accumulation, and metabolic rates. At three seafood consumption levels (41.6–255.6 g·d−1), estimated daily intakes (EDI) of MeHg for Chinese adults ranged from 0.01 to 0.40 μg·kg−1·d−1, with target hazard quotients (THQ) from 0.13 to 3.98. Except for Penaeus monodon and Metapenaeus ensis, all other aquaculture products at high consumption levels exceeded the USEPA safety threshold for MeHg EDI and had THQ > 1, indicating potential health risks.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3826-9
Cyclic molecular architectures offer unparalleled functional diversity and assembly advantages, holding significant promise for applications in nanomedicine. Here, we propose a cyclic molecular engineering strategy designed to address the hydrophobicity of organic dyes while simultaneously enhancing their phototherapeutic efficacy. Through esterification of the boron dipyrromethene (BDP) core with adipic acid (CB-c) or dithiodiacetic acid (CB-s), we developed self-assembling nanoparticles (NPs) with exceptional colloidal stability (>60 d) and microenvironment-responsive dissociation. CB-s NPs exhibited unique antiparallel dimeric packing in crystallographic studies, enabling robust H-aggregation. The redox-sensitive disulfide bonds in CB-s NPs conferred tumor-selective disassembly (90% dissociation within 30 h), facilitating spatiotemporally controlled therapeutic activation. In vivo studies demonstrated superior synergistic photodynamic/photothermal therapy (PDT/PTT) efficacy, achieving 92% tumor suppression. This work establishes cyclic architecture-driven supramolecular organization as a paradigm-shifting approach for developing multifunctional nanomaterials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022501
The pretreatment of trace emerging contaminants in environmental matrices is challenging due to diverse methods and uncertain applicability. This study compared solid-phase extraction (SPE) and liquid-liquid extraction (LLE) for extracting endocrine-disrupting compounds (EDCs), particularly phthalate esters (PAEs), using laboratory-spiked blank samples. LLE achieved satisfactory recoveries for PAEs at spike levels below 4 μg·L−1, enabling detection of five PAEs including diisodecyl phthalate (DIDP), with improved efficiency via repeated extraction. SPE offered lower detection and quantification limits, higher accuracy and sensitivity, and achieved high recoveries for 12 EDCs and 10 antibiotics at spike levels ≥0.2 μg·L−1, with detection limits as low as 0.1–6.4 ng·L−1. The developed SPE coupled with liquid chromatography-Orbitrap mass spectrometry (LC-Orbitrap MS) method was applied to industrial wastewater samples. Across five industrial sectors (coatings, rubber, pharmaceuticals, inks, and materials technology), five antibiotics and ten EDCs were detected, with total concentrations ranging from 0.03–0.56 μg·L−1 and 0.07–1.91 μg·L−1, respectively. Sector-specific profiles emerged: rubber industry effluent was dominated by dibutyl phthalate (DBP) at 1.07 μg·L−1, while pharmaceutical effluent featured sulfamonomethoxine (SMM) at 0.34 μg·L−1. This systematic evaluation demonstrates that SPE-LC-Orbitrap MS is robust for complex matrices, providing a technical foundation for accurate quantification of emerging contaminants in industrial wastewater.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510081
Electrochemical two-electron oxygen reduction (2e−ORR) for hydrogen peroxide (H2O2) synthesis faces challenges of low cathodic catalytic efficiency and complex catalyst preparation. This study prepared nitrogen-vacancy (Nv) rich carbon nitride via one-step pyrolysis, composited with carbon nanotubes (CNT), and loaded onto graphite felt (GF) to fabricate a non-precious metal gas diffusion electrode Nv-C3N4-CNT/GF. The electrode exhibited a three-dimensional fibrous skeleton with interconnected micro-nano hierarchical pores, facilitating efficient electron transport. Electrochemical impedance spectroscopy revealed a low charge transfer resistance of 13.26 Ω, indicating superior electrocatalytic activity and charge transfer efficiency. Single-factor experiments and response surface methodology (RSM) optimization determined optimal conditions: calcination temperature 300 °C, catalyst mass ratio 3:1, Nv-C3N4-CNT loading 0.1 g, current density 40 mA·cm−2, pH 7, and aeration rate 0.1 L·min−1. Under these conditions, H2O2 accumulation reached 1622.73 mg·L−1 after 90 min, which was 1.3 and 1.5 times higher than g-C3N4-CNT/GF and CNT/GF electrodes, respectively. Stability tests showed that after 6 cycles, H2O2 production remained at 1400.52 mg·L−1, and within 960 min, the maximum production reached 2014.04 mg·L−1 with a highest Faradaic efficiency of 54.86%. These results demonstrate the electrode's potential for cyclic use. This study provides a new approach for developing efficient, low-cost electrodes for electrosynthesis of H2O2, offering a reference for green H2O2 production.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4000-1
Formamidine lead-based perovskites (FAPbI3) exhibit significant potential in optoelectronic applications. Nevertheless, they encounter challenges related to δ-phase instability and reliance on toxic solvents. In this study, we present a green solvent-additive synergy strategy that employs γ-valerolactone (GVL) in conjunction with reductive acids like oxalic acid (OA), to stabilize α-FAPbI3 single crystals (SCs). GVL enhances the stability of the precursors through the formation of FA+-GVL hydrogen bonds and high-valence [PbIx]2−x clusters, resulting in ambient-stable α-phase SCs, yielding a marked improvement in stability compared to SCs prepared with the toxic solvent γ-butyrolactone (GBL). Additive modulation demonstrates that H+ and reductive groups play a critical role in regulating crystallization, suppressing the δ-phase by promoting FA+ dissociation and inhibiting MA+ deprotonation. A solvent-involved intermediate, δ-FAPbI3-GVL, has been identified; this intermediate evolves into α-FAPbI3 at a low temperature of 60 °C, thereby reducing the energy barriers associated with the α to δ phase transition. In contrast, non-reductive acids and reductive ionic liquids do not inhibit δ-phase formation, with the latter even promoting the crystallization of pure δ-FAPbI3. By utilizing low-volatility OA as an additive, optimized FA0.9MA0.1PbI3 single crystal thin films exhibit a low defect density of 8.3 × 10^11 cm−3. Subsequently, a photodetector was fabricated. Under zero bias voltage and 780 nm illumination, the device exhibited a responsivity of 14.5 mA/W, a detectivity of 3.75 × 10^10 Jones, and a response speed of 149/65 μs. Moreover, without any encapsulation, the device’s performance diminished by only 17% after 30 days of storage in ambient conditions, indicating remarkable stability.