SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4244-0
Near-infrared perovskite light-emitting diodes (NIR-PeLEDs) suffer from poor operational stability, largely due to interfacial reactions at the electron-transport layer (ETL)/perovskite interface. Here, we introduce a zinc ion (Zn2+)-chelated hybrid ETL derived from a Zn2+-chelated polyethylenimine ethoxylated (PEIE) complex, which partially retains the surface properties of ZnO but exhibits significantly reduced oxygen defects and surface-adsorbed hydroxyl groups. This well-modulated surface promotes perovskite crystallization and mitigates interface-induced deprotonation of organic cations during device operation. Consequently, NIR-PeLEDs employing this hybrid ETL achieve a peak external quantum efficiency (EQE) of 20.1%, a high radiance of 652 W sr-1 m-2, and an exceptional T50 lifetime of 270.7 hours at a high current density of 100 mA cm-2, which is over five times that of devices based on conventional ZnO nanocrystal (NC) ETLs. Our results present an effective ETL strategy for operationally stable NIR-PeLEDs and thoroughly reveal the critical role of regulating interfacial reactions in stabilizing buried interfacial contacts. These findings provide valuable insights for advancing perovskite optoelectronic devices that suffer from interface-induced performance degradation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4349-9
Sodium metal batteries are promising for large-scale energy storage due to sodium's abundance and low cost, but their commercialization is hindered by dendrite growth and low utilization of sodium metal anodes. Here, we report a yolk-shell structure with gold nanoparticles (Au NPs) confined in hollow carbon nanospheres (Au@HCN) as a robust seeding/hosting interphase. The encapsulation isolates Au NPs from direct electrolyte contact, mitigating parasitic reactions, while the void space accommodates volume changes during alloying. Notably, electrochemical testing reveals that Au NPs undergo alloying-induced amorphization upon sodiation, forming a Na-Au amorphous alloy that enhances sodiophilicity and ensures uniform Na nucleation. This amorphous phase, confirmed by ex situ X-ray absorption spectroscopy and transmission electron microscopy, reduces nucleation overpotential and promotes dendrite-free deposition. The Au@HCN electrode achieves a high Coulombic efficiency of 99.8% over 500 cycles at 1 mA cm−2 and a long cycle life of over 2000 hours at 0.5 mA cm−2 in symmetric cells. Full cells paired with Na3V2(PO4)3 cathodes deliver a specific capacity of 105 mAh g−1 with 92% retention after 500 cycles. This work provides a rational design for stable sodium metal anodes through encapsulation and alloying-induced amorphization, offering a pathway for practical sodium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3615-1
Stretchable electronics are pivotal for bio-integrated devices, soft robotics, and wearables, yet their development is constrained by single-layer architectures that limit integration density and by mechanical mismatch between rigid components and soft substrates, which curtails service life. Here, we introduce a LEGO-like modular assembly strategy to construct multilayer three-dimensional (3D) stretchable electronics. Electronic components (ECs) and self-healing polyurethane (SPU) substrates patterned with liquid metal (LM) circuits serve as the modular blocks. This design simplifies fabrication and markedly enhances 3D integration density. The combination of LM circuits and self-healing elastic substrates enables devices to withstand diverse deformations and to autonomously heal after mechanical damage. Notably, the devices can undergo multiple recycling and reuse cycles without significant performance loss. This methodology offers a new paradigm for advanced flexible electronics, addressing critical bottlenecks in integration density, mechanical robustness, and sustainability.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3818-4
The electrocatalytic reduction of carbon dioxide (CO2RR) to multi-carbon (C2+) products is of significant interest due to its implications for chemical manufacturing and carbon neutrality. However, the competitive hydrogen evolution reaction (HER) and sluggish C–C coupling kinetics impede selectivity at industrial current densities. Here, we report an interfacial nanoconfinement strategy using N-(2-acetamido)iminodiacetic acid (ADA) to engineer a series of capping layer-covered Cu catalysts (Cu@ADA-x). A volcano-type correlation between capping layer thickness and C2+ selectivity is observed. The optimized Cu@ADA-m catalyst achieves a maximum Faradaic efficiency for C2+ products (FE C2+) of 86.8% and maintains over 80% of its initial FE C2+ after 42 hours at 200 mA cm−2, with an energy efficiency of 38.5%. In-situ Raman spectroscopy and density functional theory (DFT) calculations reveal that the capping architecture stabilizes metastable Cu species and optimizes gas adsorption, enhancing *CO intermediate utilization and lowering C–C coupling energy barriers. This work provides a catalyst design principle for industrial-scale carbon-neutral electrochemical production of multi-carbon products.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608008
Medium-chain fatty acids (MCFAs), including caproate and caprylate, are promising biobased products with high energy density, hydrophobicity, and chemical conversion value, serving as key intermediates linking organic waste valorization to circular economy development. Compared to conventional anaerobic digestion for methane, chain elongation (CE) via reverse β-oxidation (RBO) converts short-chain intermediates (e.g., acetate, lactate, ethanol) into higher-value carboxylic acids, offering a novel route for resource recovery from sewage sludge, food waste, agricultural residues, livestock manure, and high-strength organic wastewater. However, natural mixed-culture CE systems face constraints from substrate composition fluctuations, electron donor competition, methanogenic carbon diversion, insufficient product selectivity, product toxicity, and high separation costs, hindering stable, efficient, and targeted MCFA production. This review systematically summarizes the metabolic mechanisms, artificial regulation strategies, and engineering bottlenecks in CE-based MCFA production, emphasizing directed recovery of carbon and electron resources from organic wastes. Future directions include stable continuous-flow operation, product separation and recovery, techno-economic assessment, and life cycle evaluation. The review aims to provide insights for high-value organic waste utilization and synergistic optimization of carbon and energy recovery.