SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4505-9
Transition metal hydroxides are promising oxygen evolution reaction (OER) catalysts for alkaline water electrolysis. This study reports Ce-doped Co(OH)2 electrocatalysts synthesized via one-step electrodeposition, where the Ce3+/Ce4+ ratio is precisely controlled by deposition temperature. The optimized Ce-Co(OH)2 catalyst, obtained at 40°C, exhibits an overpotential of 236 mV at 10 mA cm-2 and maintains stability for 200 h. In an anion-exchange membrane water electrolyzer (AEMWE), the Ce-Co(OH)2 anode achieves a cell voltage of 2.04 V at 1 A cm-2 and operates for over 500 h at 500 mA cm-2. Mechanistic analysis reveals that Ce3+/Ce4+ dynamic electron buffering regulates surface reconstruction: during OER, electron transfer direction reverses (Ce → O → Co), with Ce donating electrons to Co sites to prevent over-oxidation and structural collapse. This work establishes a versatile strategy for balancing surface reconstruction and structural stability in Co-based OER catalysts, providing a foundation for designing high-performance, durable alkaline water oxidation electrocatalysts.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511090
In ecological restoration projects such as wetland reconstruction and mine reclamation, seedling transplantation or mechanical damage often leads to slow healing, reducing survival rates and weakening carbon sequestration and soil-water conservation functions. To address secondary pollution from traditional chemical remediation, this study developed a self-powered piezoelectric hydrogel for green electrical stimulation of plant wounds. The hydrogel, based on polyacrylamide/polyethylene glycol (PAM/PEG) with CaCl2, formed a microporous, locally ordered piezoionic network. Characterization included microstructure, piezoionic response, and water retention. At 30 °C and 55% relative humidity, the hydrogel retained about 70% mass after 80 h of continuous water loss. Under simulated environmental mechanical forces, the hydrogel generated a peak voltage of approximately 6 mV. In tomato seedling stem models, wound callus area ratios reached approximately 49.50%, 64.87%, and 86.13% at 3, 5, and 10 days, respectively, when the hydrogel was attached and driven by environmental forces. The PAM/PEG/CaCl2 hydrogel efficiently converts environmental mechanical energy into mild electrical signals, promoting plant wound healing, reducing exogenous chemical use, and offering a low-carbon, environmentally friendly material pathway for ecological restoration and urban green space management.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60657-3
Fe-Mn catalysts have attracted considerable attention for industrial Fischer-Tropsch synthesis (FTS) due to their ability to modulate product spectra. Carbon adsorption and permeation on catalyst surfaces are critical elementary steps in the in situ formation of active iron carbide phases. Here, density functional theory (DFT) calculations systematically investigate the atomistic structures, thermodynamic stabilities, and electronic properties of carbon-deposited Fe-Mn alloy surfaces at the early stage of carburization. These surfaces exhibit distinct thermodynamic sensitivity to carbon atoms adsorbed on the surface and permeating into interstitial sites. By combining DFT with minima-hopping structural searches, we demonstrate that the initial stage of carbon permeation cannot trigger surface reconstruction to form iron carbide phases. The addition of manganese thermodynamically hinders carbon permeation. Although deposited carbon atoms modulate the electronic structure of metals, manganese retards the shift of d-band centers toward those of bulk iron carbide phases. This study provides atomic-scale insight into the in situ evolution of Fe-Mn catalyst surfaces during carbon deposition, indicating that manganese promoter has a noticeable effect on carbon permeation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026031103
Sintering ash washing wastewater from steel plants is characterized by high salinity, high chloride content, high thallium load, and coexistence of multiple metals, posing significant treatment challenges. This study employed thermodynamic simulation to elucidate the speciation and transformation of thallium in such wastewater, and systematically investigated a combined process of sulfide precipitation coupled with coagulation-flocculation. The results showed that at pH 9–10, thallium predominantly existed as Tl+. Under oxidizing conditions, the stable complex anion [TlCl4]− dominated at pH < 8.1, while at pH > 8.1, a mixed system of solid Tl2O3 and dissolved TlClO3 coexisted. Under optimized conditions (pH 12, 2.0% thallium removal agent, 1.0% multi-effect auxiliary agent), the thallium concentration in the wastewater decreased from an initial 9.58 mg·L−1 to 4.31 μg·L−1, meeting the stringent discharge limit of ≤5 μg·L−1. Concurrent removal of Cu, Zn, and Cd was achieved. The primary removal mechanism was sulfide precipitation, with lattice substitution between Tl+ and K+ serving as an auxiliary pathway. This study provides a practicable technical route for advanced treatment of high-chloride, high-thallium industrial wastewater.