SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4159-y
The electrocatalytic oxidation of ethylene glycol (EG) derived from polyethylene terephthalate (PET) waste to valuable glycolic acid (GA) represents an attractive route for waste resource upcycling. However, achieving high selectivity remains challenging due to the difficulty in steering the complex reaction pathway. In this study, PdPtCuInBi high-entropy intermetallic metallene (HEI-PdPtCuInBiene) is reported to precisely control EG oxidation reaction (EGOR) pathway for GA production by constructing multiple active sites at the atomic scale. In PET hydrolysate, it achieves a Faradaic efficiency of 99.87% and a production rate of 1.47 mmol h−1 cm−2, along with excellent stability. Mechanistic studies reveal that the high-entropy structure induces strong p-d orbital hybridization, which optimizes the electronic structure of active sites, thus weakening the adsorption of key carbonyl intermediates and suppressing C–C bond cleavage. The synergistic electronic effect among Pd, Pt, and Cu further enables differential adsorption of distinct intermediates on diverse active sites, enhancing the selective formation of GA. Techno-economic analysis exhibits high profitability (~$784.9 t−1 PET) of this route, demonstrating the great potential of high-entropy intermetallic metallene in regulating electrocatalytic upcycling of PET waste and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4097-3
The on-demand patterning of two-dimensional transition metal dichalcogenides (TMDs) with tailored edges is critical for electronic and optoelectronic applications but remains technically challenging. Here, we report a stress-guided anisotropic etching strategy for producing large-area, well-ordered MoS2 nanostructures, including nano-ribbons and nano-squares, without templates. By applying uniaxial cumulative stress followed by selective thermal etching, MoS2 monolayers are statistically etched into ribbon-like structures whose width inversely correlates with applied stress magnitude. The newly etched edges are macroscopically straight or serrated, predominantly Mo-zigzag terminated, and enhance photoluminescence by a factor of ~8.0. The edge type depends on the angle between stress direction and crystallographic orientation, corroborated by theoretical calculations. Biaxial stressing generates well-defined nano-squares, offering a scalable, versatile patterning route for engineering 2D materials with tailored functional edges, promising for electrocatalytic and optoelectronic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3843-9
Lignocellulose-based electromagnetic interference (EMI) shielding materials are gaining prominence across multiple sectors, driven by the growing EMI issues associated with rapid advances in communication technologies and electronic devices. These materials have demonstrated significant superiority over traditional EMI shielding solutions, which are often hampered by high cost and environmental concerns. This review emphasizes the excellent potential of lignocellulose as a cost-effective and flexible alternative to deliver the hierarchical structures and functional properties that qualify it for EMI shielding applications. The underlying EMI shielding mechanisms are then elucidated, with a focus on the benefits conferred by lignocellulose in such material systems. Furthermore, typical fabrication strategies for lignocellulose-based EMI shielding materials are comprehensively summarized, along with a discussion of their emerging applications in diverse scenarios. Finally, the challenges encountered in developing lignocellulose-based EMI shielding materials and their significant prospects for future boosting high-performance design and application are also outlined. The insights presented herein are expected to promote the development of efficient and green lignocellulose-based EMI shielding materials that meet the evolving demands of modern society.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60669-X
Dry reforming of methane (DRM) converts CH4 and CO2 into syngas with a unity H2/CO ratio, but suffers from catalyst deactivation via sintering and carbon deposition at high temperatures. This study addresses these challenges by employing UiO-66 as a precursor to modify Pt-based catalysts. A series of Pt/CeO2-ZrO2 catalysts were synthesized via incipient wetness impregnation using supports with varying Ce/Zr ratios prepared hydrothermally. Comprehensive characterization—including CO2-TPD, CH4-TPD, XPS, XAFS, in situ DRIFTS, TG, and Raman spectroscopy—revealed a volcano-type correlation between DRM performance and Ce/Zr ratio. Optimal activity and stability were achieved with Pt/3CeO2-ZrO2 (Ce/Zr = 3:1). This catalyst features highly dispersed platinum, primarily as single atoms and thermally stable PtOx clusters. It exhibits the highest concentration of Ce3+ and Zr3+ species, abundant oxygen vacancies, and high defect density, indicating strong metal-support interaction. Mechanistically, stable DRM is facilitated by oxygen-assisted CH4 dissociation and hydrogen-assisted CO2 dissociation. At 800 °C, CH4 and CO2 conversions reached 86% and 93%, respectively, with H2/CO ratio near unity. A 10 h stability test showed no detectable carbon deposition. These results confirm that the catalyst enhances reaction kinetics while demonstrating superior activity, stability, and resistance to coking and sintering.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-024-3358-1
Type II photosensitizers (PSs) activated by 660 nm light suffer from high oxygen consumption, limiting efficacy in hypoxic microenvironments. Type I PSs triggered by 808 nm near-infrared (NIR) light enable electron transfer to generate superoxide anions (O2•−) with lower oxygen dependence. However, developing type I PSs remains challenging due to the low energy of NIR light and the intrinsic preference for type II processes under matched energy levels. Here, co-assembly of 5,10,15,20-tetrakis-(4-aminophenyl)-porphyrin (TAPP) with N-carbobenzyloxy-L-leucine (Cbz-Leu) yields a supramolecular nano-PS (TAPP@Cbz-Leu). Under 808 nm irradiation, TAPP@Cbz-Leu significantly produces O2•−. Noncovalent tight binding between TAPP and Cbz-Leu enhances photoinduced electron transfer from Cbz-Leu to triplet TAPP, generating TAPP•− and promoting O2•− formation. TAPP@Cbz-Leu also exhibits excellent photothermal properties under 808 nm irradiation, with a photothermal conversion efficiency of 32.7%. In vivo studies demonstrate effective antibacterial activity against MRSA-infected wound models and accelerated wound healing. This work represents the first example of converting a type II PS into a type I PS via a simple co-assembly strategy, offering a new paradigm for NIR-triggered supramolecular type I photosensitizers.