SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4351-8
Breaking intrinsic structural symmetry is a fundamental prerequisite for pronounced nonlinear optical responses. Low-symmetry semiconductors with inherent anisotropy enable self-powered optoelectronic conversion and polarization-sensitive functionalities. This work reports the synthesis of low-dimensional van der Waals chain TeSe2 crystals with intrinsic inversion and C3 symmetry breaking. Angle-resolved polarized Raman spectroscopy and second-harmonic generation measurements confirm crystalline anisotropy and nonlinear optical performance. Electrical transport studies reveal p-type conduction with a room-temperature field-effect mobility of 122 cm2 V-1 s-1. The TeSe2 photodetector achieves self-powered detection and linearly polarized light detection across 405–1064 nm, with a photoresponsivity of 77.3 mA/W at 532 nm. The linear photogalvanic effect response is effectively modulated by gate voltage. Density functional theory calculations attribute p-type doping to Te and Se vacancies, while the nonlinear optical origin is linked to strong Berry curvature. Applications in polarization encoding communication and polarization imaging are demonstrated, indicating potential for low-energy-consuming, highly sensitive, on-chip integrated linear polarized photodetectors.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4313-7
Liquid-to-vapor mass transfer is central to energy and environmental processes. Conventional distillation relies on vapor-liquid equilibrium and device-level optimization, with materials playing passive structural roles. Non-boiling processes such as membrane distillation and interfacial solar evaporation localize phase change at confined interfaces, making mass transfer a materials-mediated transport phenomenon where interfacial structure and chemistry dictate evaporation kinetics, vapor escape, and solute rejection. Janus interface materials, featuring spatially separated hydrophilic and hydrophobic domains, introduce architectural asymmetry to regulate liquid-to-vapor mass transfer. This review summarizes recent advances, highlighting mechanisms including the cooperative pump-valve effect, nanoconfinement-enhanced transport, and mitigation of fouling and scaling. Representative applications in membrane distillation, solar-driven evaporation, and personal thermal-moisture management are systematically discussed. Key challenges and future opportunities are outlined, particularly in advancing fundamental understanding, scalable fabrication, and practical implementation.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606004
To identify optimal watershed remediation pathways under environmental and economic dimensions, an integrated environmental-economic impact assessment framework combining life cycle assessment (LCA) and life cycle costing (LCC) based on openLCA was established, using 1 m³ of treated wastewater as the functional unit. This framework comprehensively evaluated the environmental impacts and economic costs of three ecological buffer measures—constructed wetlands, ecological intercepting ditches, and vegetation restoration projects—in non-point source pollution control. The results indicated that constructed wetlands offer the optimal environmental-economic profile, featuring the lowest comprehensive cost (¥1.01 yuan/m³) and the lowest load across most environmental impact categories, with only slightly higher land resource consumption intensity. Ecological intercepting ditches exhibited higher impacts in areas such as metal resource consumption due to the use of rebars and base fertilizer inputs, resulting in a moderate comprehensive cost (¥1.57 yuan/m³). Vegetation restoration projects incurred the highest comprehensive cost (¥61.14 yuan/m³) and produced the most significant environmental impacts, with elevated indicators such as human carcinogenic toxicity. This primarily stemmed from the extensive use of concrete grass pavers and base fertilizer in rural river sections. These findings provide quantitative references for environmental-economic integrated evaluation and decision-making regarding ecological buffer zone engineering schemes in similar watersheds.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607007
Printing and dyeing sludge (PDS) fly ash is often classified as hazardous waste due to its high content and diversity of heavy metals (HMs). This study co-disposed PDS fly ash and heavy metal-contaminated soil to produce sintered ceramsites, investigating the effects of sintering conditions on physical properties and HM migration/transformation, and elucidating the immobilization mechanisms. The optimal sintering process was identified as preheating at 400 °C for 10 min, followed by sintering at 1150 °C for 10 min. The resulting ceramsites exhibited a 1-h water absorption of 2.7%, a bulk density of 830 kg/m³, HM volatilization rates below 15%, and a residual fraction (F4) proportion exceeding 86%. Characterization revealed that during sintering, HMs were encapsulated by the glassy phase and reacted with amorphous silica-alumina to form stable silico-aluminates, synergistically reducing HM mobility. However, sintering temperatures ≥1200 °C destabilized the ceramsite structure, causing secondary HM release. This research provides an efficient and simple route for the resource utilization of dyeing sludge fly ash and contaminated soil.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026032502
Methane (CH4) is a potent greenhouse gas with a global warming potential approximately 28 times that of CO2 over a 100-year horizon. Direct observation of atmospheric CH4 concentrations is essential for quantifying contributions from anthropogenic and natural sources. This study analyzes online CH4 monitoring data from Huzhou City and Deqing County in northern Zhejiang Province, China, to characterize spatiotemporal variations and identify controlling factors. Diurnal patterns show higher nighttime concentrations due to reduced vertical mixing and enhanced stability, with winter maxima and autumn minima. The seasonal background concentration at Huzhou station follows winter > spring > autumn > summer. Deqing, influenced by artificial aquaculture ponds and wetlands, exhibits smaller diurnal amplitude and generally higher CH4 levels than Huzhou, particularly during the plum rain season. Potential Source Contribution Function (PSCF) analysis indicates that high-concentration sources are predominantly located in eastern Zhejiang, with seasonal shifts: spring sources in the Yangtze River Delta and southeast coast, summer sources in southeastern Zhejiang, minimal autumn regional transport, and winter sources in eastern Jiangxi. These findings underscore the roles of local wetland emissions and regional transport in modulating CH4 levels, providing a scientific basis for targeted emission reduction strategies.