Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507027
Ammonia nitrogen (NH3-N) is a common water pollutant that can induce eutrophication and threaten aquatic ecosystems and human health. Accurate monitoring is essential for water safety. This study applied a self-developed gas-permeable membrane-based conductivity sensor (GPMCS) for real-time in-situ monitoring of NH3-N in two water bodies. In the Qunying River (surface river water), GPMCS captured concentration fluctuations linked to pump operations and sewage intrusion, with mean inlet and outlet concentrations of 4.67 and 3.42 mg/L, respectively. In Swan Lake (landscape aquaculture water), concentrations reached up to 11.16 mg/L, with site means of 6.42 and 7.04 mg/L, influenced by aquaculture activities, weather, and location. GPMCS results correlated strongly with national standard methods (r1=0.8132, r2=0.7483), confirming accuracy and reliability. Compared to existing techniques, GPMCS offers high selectivity, strong anti-interference, portability, no sample pretreatment, low cost, and environmental friendliness, making it suitable for long-term in-situ monitoring. This technology provides robust support for sustainable water environment management.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026021301
Lithium cobalt oxide (LCO) nanoparticles (NPs), generated during the lifecycle of LCO batteries via mechanical wear, pose respiratory health risks. This study systematically assessed LCO NPs' physicochemical properties, ion release, and immunotoxicity using multi-scale models. LCO NPs exhibited irregular morphology, layered crystal structure, good dispersion, and negative surface charge. Cobalt ion release was minimal: 1.03% in deionized water and 0.11% in cell culture medium. In vitro, LCO NPs significantly induced reactive oxygen species (ROS) production and secretion of pro-inflammatory cytokines (IL-6, IL-1β, TNF-α) in macrophages, promoting M1 polarization. In vivo, intranasal exposure caused dose-dependent pulmonary accumulation, alveolar destruction, inflammatory cell infiltration, and elevated cytokines in bronchoalveolar lavage fluid (BALF). Transcriptomic analysis revealed significant enrichment of NF-κB, JAK-STAT, and Toll-like receptor signaling pathways, implicating these in macrophage activation and inflammation amplification. This multi-level study elucidates LCO NPs' immunotoxicity mechanisms, providing a scientific basis for environmental health risk assessment and management of lithium-ion battery materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026050701
Azo food colorants are persistent aquatic pollutants posing risks to ecosystems and human health. Utilizing biomass waste to produce low-cost activated carbon offers a sustainable strategy for their removal. In this study, activated carbon (HPR-AC) was synthesized from Haematococcus pluvialis residue via phosphoric acid activation, and its adsorption performance was evaluated using Sunset Yellow (SY), Ponceau 4R (P4R), and Tartrazine (TY) as model pollutants. The effects of solution pH, adsorbent dosage, initial dye concentration, and temperature on adsorption efficiency were systematically examined. Characterization by BET, FTIR, XRD, and XPS revealed that HPR-AC possesses a high specific surface area and an abundant mesoporous structure. The adsorption process was well described by the Langmuir isotherm and pseudo-second-order kinetic models, indicating monolayer chemisorption and an endothermic nature. At pH 5 and 55 °C, the maximum adsorption capacities reached 67.12, 79.72, and 72.75 mg·g−1 for SY, P4R, and TY, respectively. Statistical physics modeling further suggested a multilayer physical adsorption mechanism, primarily governed by pore filling, electrostatic interactions, hydrogen bonding, π-π stacking, and charge transfer. These findings provide both theoretical insights and empirical data for the valorization of H. pluvialis residue and the development of efficient, sustainable adsorbents for azo dye removal from water.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3457-3
MAPbI3 perovskite solar cells (PSCs) exhibit a theoretical open-circuit voltage (VOC) of approximately 1.3 V, yet practical devices suffer from substantial VOC loss due to interfacial charge recombination and energy-level misalignment. This study introduces SrTiO3 nanocubes as an interfacial layer between the TiO2 electron transport layer (ETL) and MAPbI3 absorber to synergistically address these losses. The SrTiO3 interlayer facilitates optimal energy-level alignment with the MAPbI3 conduction band, reducing charge carrier energy loss and enhancing electron extraction. Additionally, the minimal lattice mismatch between SrTiO3 and MAPbI3 promotes the growth of high-quality perovskite films with reduced defect density. Time-resolved photoluminescence (TRPL) measurements reveal that the SrTiO3-modified sample exhibits a prolonged slow decay lifetime of 54 ns and an average carrier lifetime of 60.72 ns, compared to 45.20 ns for the control. Consequently, the VOC of MAPbI3 PSCs increases to 1.17 V, and the power conversion efficiency (PCE) reaches 22.19%, up from 19.95% for the control. Stability tests under 25% relative humidity and 25 °C show that unencapsulated SrTiO3-based PSCs retain approximately 92% of their initial PCE after 500 h, whereas control devices degrade to 74%. This work demonstrates that synergistic energy-level grading and lattice matching via SrTiO3 interface engineering effectively minimizes VOC loss and enhances both efficiency and stability of MAPbI3 PSCs.