SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4165-1
Developing efficient photocatalysts for hydrogen peroxide (H2O2) synthesis is vital for sustainable chemistry, yet optimizing the electronic structure of triazine-based covalent organic frameworks (COFs) through precise spatial engineering remains a challenge. In this work, we constructed four model COFs to systematically decode how the spatial arrangement and incorporation level of triazine moieties regulate the electronic structures and H2O2 production efficiency. Combined experimental and theoretical analyses revealed that FB-AT achieved an optimal donor-acceptor architecture via rational spatial arrangement of triazine and benzene moieties. This configuration established an intramolecular potential gradient, which not only promoted charge separation by suppressing the exciton binding energy but also enriched the electron density at triazine sites. These electron-rich active centers significantly facilitated the oxygen reduction reaction by lowering the thermodynamic energy barrier for *OOH intermediate formation. Consequently, FB-AT exhibited a remarkable H2O2 production rate of 11055 μmol g-1 h-1 in pure water, along with a superior solar-to-chemical conversion efficiency of 1.16%. Additionally, FB-AT enabled complete degradation of phenol, tetracycline, and rhodamine B within 5–15 min of visible light irradiation. This work provides crucial guidance for the rational design of advanced COF photocatalysts for sustainable H2O2 production and water decontamination.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3785-5
The effective separation and utilization of photo-generated carriers are critical for advancing photocatalysis, particularly in coupled reactions of H2 production and value-added chemical synthesis. Here, a sandwich-structured MnO2@ZnIn2S4@Ti3C2 hollow sphere was designed, with MnO2 and Ti3C2 loaded on the inner and outer surfaces of ZnIn2S4, respectively. MnO2 acts as an oxidation cocatalyst collecting photo-generated holes, while Ti3C2 serves as a reduction cocatalyst for electrons, promoting spatial separation of carriers and enabling spatially separated redox reactions. The hollow structure enhances light harvesting. The optimal catalyst achieves photocatalytic H2 production rate of 6.29 mmol g−1 h−1 and benzaldehyde production rate of 5.26 mmol g−1 h−1 from benzyl alcohol oxidation, significantly outperforming ZnIn2S4, MnO2@ZnIn2S4, and ZnIn2S4@Ti3C2. In situ irradiated X-ray photoelectron spectroscopy confirms effective carrier separation. In situ electron paramagnetic resonance and diffuse reflectance infrared Fourier transform spectroscopy reveal reaction intermediates. This work provides a strategy for designing efficient photocatalysts for coupled H2 production and selective oxidation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3634-0
Messenger RNA-lipid nanoparticle (mRNA-LNP) vaccines have demonstrated extraordinary efficacy against severe acute respiratory syndrome coronavirus 2, establishing LNPs as the premier platform for mRNA therapeutics. However, the pervasive presence of anti-polyethylene glycol (PEG) antibodies undermines PEGylated LNP performance by diminishing therapeutic efficacy. To address this challenge, we synthesized a panel of lipid-poly(2-oxazoline) (lipid-POx) conjugates as alternatives to lipid-PEG and systematically evaluated how their polymer backbone, degree of polymerization, and lipid tail structure influence LNP physicochemical properties and mRNA delivery performance. Among POx-LNPs formulated with heptadecan-9-yl 8-((2-hydroxyethyl)(6-oxo-6-(undecyloxy)hexyl)amino)octanoate (SM-102) as the base lipid, those constructed with single-tailed C18-POx exhibited smaller particle sizes and superior freeze-thaw stability. These C18-POx-LNPs maintained comparable in vivo transfection efficiency to PEG-LNPs even when fully replacing 1,2-dimyristoyl-sn-glycero-3 (DMG)-PEG. Notably, in mice bearing pre-existing anti-PEG antibodies, C18-POx-LNPs demonstrated over 200-fold higher transfection efficiency than PEG-LNPs. Additionally, repeated administration of POx-LNPs induced dose-dependent anti-POx immunoglobulin M (IgM) and IgG responses, with antibody titers inversely correlated with POx hydrophilicity. This study underscores the effectiveness of substituting PEG with POx in LNP construction to address the transfection efficiency in populations with pre-existing anti-PEG antibodies, and would inspire the development of more hydrophilic polymers for LNP formulation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010802
Ozone (O3) pollution is a prominent issue in the Guanzhong Plain, necessitating effective control of its precursors, particularly volatile organic compounds (VOCs). However, studies on VOC pollution characteristics at the county level are scarce. To investigate the summer VOC pollution characteristics and sources in high-altitude towns of the Guanzhong Plain, continuous monitoring of 53 typical VOC species was conducted at two sites in Changwu County, Xianyang City (elevation 1200 m). The spatiotemporal variations of ambient VOCs and their ozone formation potential (OFP) were analyzed, and source apportionment was performed using the Positive Matrix Factorization (PMF) model. Results showed that average total VOC (TVOCs) concentrations at the Changwu Government and Changwu Middle School sites were 60.04×10⁻⁹ and 83.28×10⁻⁹, respectively. Oxygenated VOCs (OVOCs) dominated, accounting for 55.14% and 62.91% of TVOCs, followed by alkenes, aromatic hydrocarbons, and halogenated hydrocarbons. Industrial sources contributed the most (43.2%) to VOC emissions in Changwu County, but site-specific differences were observed: the Government site was primarily influenced by solvent use (30.7%) and motor vehicles (19.1%), while the Middle School site was dominated by domestic sources (27.6%) and motor vehicles (20.0%). The average OFP values at the Government and Middle School sites were 258.84×10⁻⁹ and 378.04×10⁻⁹, respectively, with alkenes and OVOCs as the main contributors, originating from industrial emissions, solvent use, and biogenic sources. EKMA curves indicated that Changwu County was in a VOC-limited regime during the observation period, confirming the effectiveness of VOC control for ozone mitigation. These findings provide scientific guidance for local ozone management and offer a paradigm for precise ozone pollution control in county-level regions of the Guanzhong Plain.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3845-9
The controlled regulation of molecular folding provides a fundamental pathway for constructing adaptive chiral materials with tunable optical and structural properties. This review summarizes recent progress in folding-mediated chirality control across four interrelated domains: stimuli-responsive regulation, host-guest and coordination interactions, halogen-bond driven modulation, and structural adaptability. Stimuli such as solvent polarity, temperature, pH, and light can reversibly reshape intramolecular hydrogen-bond networks to trigger chiroptical switching. Host-guest and coordination assemblies further enable cooperative chirality transfer through multicomponent interactions, while halogen bonding offers directional and programmable control over molecular helicity. Finally, intrinsic structural adaptability—integrating ferrocenyl frameworks, peptide folding, and diastereomeric design—demonstrates that molecular architecture itself can encode responsive behavior. By comparing these diverse yet convergent strategies, this review highlights the underlying principles of folding-regulated chirality and outlines future directions toward intelligent, multifunctional, and hierarchically organized chiral systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3819-7
Selective solar-driven aerobic oxidation of biomass derivatives into valuable chemicals under ambient conditions is pivotal for sustainable chemical manufacturing but faces challenges from the conflict between O2 activation kinetics and selective C–H bond cleavage. This work demonstrates a spatial decoupling strategy in a precisely-engineered 2D/2D g-C3N4/ZnIn2S4 architecture, where ZnIn2S4 domains selectively activate O2, while adjacent g-C3N4 modulates electron transfer to O2 and tailors 5-hydroxymethylfurfural (HMF) binding configuration for selective C–H bond cleavage. This enables efficient selective conversion of HMF to 2,5-diformylfuran (DFF) via ambient aerobic photooxidation. When used alone, ZnIn2S4 produces mixed reactive oxygen species (·O2−/·OH) due to uncontrolled electron transfer during O2 activation. In-situ spectroscopy, Kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations demonstrate that the 2D/2D heterojunction, driven by its directed electric field, selectively activates O2 into ·O2− at ZnIn2S4 domains while suppressing ·OH generation by moderate electron transfer, mitigating over-oxidation. Adjacent g-C3N4 domains precisely anchor HMF via –OH group interactions, steering selective DFF formation. This spatial decoupling achieves a remarkable HMF-to-DFF photo-conversion rate of 1517.5 μmol g−1 h−1 with 99.4% selectivity under ambient air, outperforming many reported state-of-the-art catalysts and maintaining durable cycling performance. The work establishes a spatial decoupling principle to overcome O2 activation kinetics and site competition thermodynamics, paving the way for advanced catalyst design for sustainable energy and the environment.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021702
Bacteria and microorganisms in toilets can enter the air via aerosol plumes generated during flushing, posing potential health risks. This study evaluates the feasibility of electrochemical synthesis of hydrogen peroxide (H2O2) for household toilet disinfection. Disinfection experiments showed that at H2O2 concentrations of 50–200 mg·L−1, bacteria in toilet bowl seal water were completely inactivated within 4–24 h without generating harmful disinfection by-products. By installing a gas diffusion electrode in the toilet tank and utilizing oxygen from air to electrochemically synthesize H2O2 in situ, the total bacterial count in the seal water was reduced by more than 90% during normal toilet use, thereby lowering the risk of disease transmission via toilet aerosols. The results suggest that electrochemical H2O2 synthesis offers a safe, healthy, and environmentally friendly disinfection method for household toilets.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022302
The escalating environmental contamination by mercury ions (Hg2+) poses severe risks to ecosystems and human health, necessitating the development of rapid, sensitive, and cost-effective detection methods. In this study, Fe1-xS@CNT composite nanozymes were synthesized via a straightforward solvothermal approach. The nanozymes exhibit uniform morphology, structural stability, and significant peroxidase (POD)-like activity. The incorporation of carbon nanotubes (CNT) facilitates electron transfer, enhancing the Fenton reaction between Fe2+/Fe3+ to generate abundant reactive oxygen species (ROS), primarily hydroxyl radicals (·OH) and superoxide anions (·O2−). The synergistic action of these ROS and photogenerated holes (h+) promotes the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue-colored product (oxTMB), establishing a colorimetric system of Fe1-xS@CNT + H2O2 + TMB. The specific binding of S2− on the nanozyme surface to Hg2+ inhibits POD activity, reducing the absorbance of the system. This principle was harnessed to develop a colorimetric method for Hg2+ quantification in environmental water samples. The method demonstrates a linear range of 0.1–500 μg·L−1 and a limit of detection (LOD) of 0.04 μg·L−1. Validation in real water samples (campus and tap water) showed recoveries between 94.4% and 111.1% with relative standard deviations (RSD) below 3.0%, comparable to atomic fluorescence spectrometry. The method offers advantages of simplicity, rapid analysis, and naked-eye visibility, providing a novel approach for on-site monitoring of heavy metal pollutants.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025021902
Polyacrylonitrile (PAN) ultrafiltration membranes are widely used in water treatment, yet their anti-fouling performance remains a challenge. In this work, PAN was first reacted with sodium azide via click chemistry to synthesize 1,2,3,4-tetrazolium polyacrylonitrile (PAN-N). Subsequently, PAN-N was reacted with iodoacetamide (IAM), 2-iodoethanol (IH), iodoacetic acid (IA), and chlorosulfonic acid (CSA) to introduce hydrophilic groups, and anti-fouling PAN ultrafiltration membranes were fabricated via phase inversion. The membranes were characterized by Fourier transform infrared spectroscopy, 1H nuclear magnetic resonance, X-ray diffraction, scanning electron microscopy, and contact angle measurements. Results showed that the PAN-N membrane exhibited superior performance to pristine PAN, with water flux increasing from 0.9233 to 1.232 L·(m2·h·kPa)−1 and bovine serum albumin (BSA) rejection from 69.23% to 82.4%. Hydrophilic modification further enhanced performance; the PAN-N-IA membrane achieved the highest water flux of 1.7347 L·(m2·h·kPa)−1 and rejection of 93.57%. Anti-fouling tests revealed that modified membranes followed the order: PAN-N-CSA > PAN-N-IA > PAN-N-IH > PAN-N-IAM > PAN-N > PAN. PAN-N-CSA and PAN-N-IA showed comparable anti-fouling performance, with total fouling indices of 56.1% and 58.47%, reversible fouling indices of 47.17% and 46.97%, and irreversible fouling indices of 8.97% and 11.47%, respectively. This work demonstrates that PAN-N-IA membranes combine high flux, high rejection, and excellent anti-fouling properties, making them promising for water treatment applications.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607017
Distillers' grains, the largest organic solid waste stream in the brewing industry, require efficient low-carbon valorization to support China's Dual Carbon Goals. This study employs life cycle assessment (LCA) to quantify CO2 emissions and carbon reduction benefits of two mainstream routes: pyrolysis to biochar and fermentation to organic fertilizer. Based on public process data, the total life-cycle CO2 emission for biochar production from 1 t of distillers' grains is 250.02 kg, with a carbon sequestration reduction of 120.29 kg, demonstrating superior long-term carbon fixation. In contrast, organic fertilizer production emits 536.14 kg CO2 per ton, achieving a carbon reduction of only 86.22 kg, indicating inferior mitigation performance. Techno-economic analysis reveals net profits of 471.97 CNY/t for biochar and 822.27 CNY/t for organic fertilizer, showing that the organic fertilizer route offers higher profitability. Both pathways effectively reduce CO2 emissions, with biochar prioritizing environmental sustainability and organic fertilizer excelling economically. This study provides data-driven insights for selecting organic solid waste recycling strategies, promoting low-carbon technologies, and establishing circular economy models in the brewing industry.