SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4432-9
Sodium vanadium phosphate (Na3V2(PO4)3, NVP) with NASICON structure is a promising cathode for sodium-ion batteries but suffers from low electronic conductivity and a high energy barrier for the V4+/V5+ redox couple, limiting practical energy density. A medium-entropy tuning strategy yields the multi-element substituted Na3.2V1.5Cr0.1Fe0.1Mn0.1Ni0.1Ti0.1(PO4)3 (ME-NVP). Entropy modulation tailors the microscopic electronic structure, enabling reversible V4+/V5+ redox at 4.0 V. Analyses reveal a synergistic diffusion mechanism that accelerates Na+ transport and enhances multiple-electron redox kinetics. Ex-situ X-ray diffraction confirms highly reversible structural evolution during cycling. The ME-NVP cathode delivers 116.8 mAh g-1 at 0.1C and retains 83.9% of initial capacity after 1000 cycles at 20C, with excellent performance from -12 to 50 °C. This work demonstrates that configurational entropy regulation unlocks high-energy polyanion cathodes for advanced sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3748-9
Direct regeneration is a sustainable solution for recycling spent lithium-ion batteries (LIBs), yet the irregular strains induced by the irreversible FePO4 phase after cycling hinder Li+ replenishment in spent LiFePO4 cathodes. This study proposes a lattice stress modulation strategy that reduces FePO4 to Fe2P2O7, reducing unit cell volume from 271.7 to 122.6 Å3, releasing residual stress and reconstructing continuous Li+ transport channels. The phase transformation reconstructs FeO6 octahedra, lowering the migration energy barrier for ions. This synergistically weakens steric effects, facilitating Li+ replenishment and eliminating Li-Fe anti-site defects. Regenerated LiFePO4 cathodes achieve 80.2% capacity retention after 1000 cycles at 2C, outperforming commercial cathodes. The work establishes fundamental principles for the pre-treatment stage of direct regeneration and provides a paradigm-shifting solution for sustainable LIB recycling.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4054-x
The sluggish kinetics and high onset potentials of the oxygen evolution reaction (OER) at the anode of alkaline water/seawater electrolyzers limit overall energy efficiency. Noble-metal oxides like RuO2 are active but suffer from high cost, agglomeration, and dissolution under oxidizing potentials, especially in chloride-rich electrolytes where competing chloride oxidation reaction (ClOR) occurs. Here, we report a mild two-step dry-wet milling strategy to achieve throughout lattice doping of F− into MnO2 (F-MnO2) and subsequent anchoring of atomically dispersed Ru via Ru–O/F hybrid bonds. The strengthened Mn 3d–O/F 2p hybridization and negative charge shielding of surface F− enhance OER activity/selectivity relative to ClOR and impart superior Cl− tolerance and corrosion resistance. The resulting F-Ru-MnO2-TH electrocatalyst exhibits overpotentials of 280 mV and 200 mV at 10 mA cm−2 in alkaline water and simulated seawater, respectively. It retains ~100% of initial activity after 200 h continuous operation in alkaline media and >95% after 300 h in simulated seawater, significantly outperforming Ru-MnO2 and commercial RuO2. This work provides a scalable route to durable, high-performance OER catalysts for seawater electrolysis.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225225
The non-Newtonian rheological properties of plastic melts are critical for regulating plastic processing, molding, and recycling processes, ensuring processing stability and product performance. However, rheological data for commonly used plastics and their blends remain incomplete. This study combined experimental testing and theoretical modeling to investigate the rheological behaviors of four pure plastics—polypropylene (PP), polyethylene (PE), polystyrene (PS), and acrylonitrile-butadiene-styrene copolymer (ABS)—and three binary blend systems: PE/ABS, PP/ABS, and PS/ABS. Rheological tests were conducted using a rheometer over a shear rate range of 0.1–100 s⁻¹ and temperatures from 180°C to 250°C. Results showed that the flow behavior index n was less than 1 for all samples, and apparent viscosity decreased significantly with increasing shear rate, indicating clear shear-thinning behavior. The consistency coefficient K followed the Arrhenius relationship with temperature, and melt viscosity decreased as temperature increased. The study quantitatively characterized the relationship between the mass fraction m (0.5 < m ≤ 1) of the main component in binary blends and melt viscosity. Based on experimental data, a component correction term was introduced into the traditional power-law model to construct a constitutive equation that simultaneously describes the effects of shear rate, temperature, and component fraction on melt viscosity. The average relative error between model predictions and experimental values was only 5.90%. These rheological data and the modified constitutive equation provide important theoretical support and data reference for optimizing process parameters in waste plastic recycling and injection molding.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031905
Land use types profoundly influence the accumulation, speciation, and ecological risk of heavy metals through differences in human activity intensity, pollution input pathways, and soil self-regulation capacity. This study investigated soils of different land use types in Longhua County, downstream of the Yixun River Basin, central Chengde City, Hebei Province. Using the Nemerow Index and Potential Ecological Risk Index, the overall regional pollution was mild (Pn=1.65) with low ecological risk (RI=121.17). Main pollutants were Cd, Pb, Zn, and Hg, with Cd and Hg as primary ecological risk factors. Construction land exhibited moderate pollution and medium risk, with a Nemerow Index of 2.37 and average RI of 190.78, significantly exceeding other land use types. PMF model identified four pollution sources: pedogenic parent material natural source (43.54% contribution) dominating Cr, Cu, Ni, Zn enrichment; metallogenic parent material natural source (19.88%) controlling Cd spatial differentiation; agricultural-transportation mixed source (24.79%) driving As and Pb accumulation; and industrial source (11.93%) causing local Hg enrichment. Natural sources contributed 63.42% of total heavy metals, being the primary contributor. As was generally below background values, not constituting pollution; Pb exceeded standards but posed low ecological risk; industrial Hg enrichment in construction land presented high pollution and ecological risk, requiring priority control.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4019-1
Vision is a vital means for humans to perceive the environment, with 80% of information from visual perception. Developing visual systems approaching or surpassing human-level vision plays an indispensable role in advancing autonomous driving, intelligent security, and other fields. Optoelectronic neuromorphic devices, integrating sensing and memory, are promising for emulating human vision. This study constructs a biomimetic visual system based on a 16 × 16 InAlZnO optoelectronic neuromorphic array with oxygen vacancy gradients. Under multi-factor modulation (oxygen vacancy concentration differences, Ag ions, heterojunction interfaces), the device achieves electrical/optical conductance tunability. Integrated with external circuits and a field-programmable gate array, the system successfully emulates human vision capabilities: image memory, denoising, attention mechanism, and motion state perception (direction, speed, color). Image digit recognition based on visual attention reaches 97.15% accuracy, and motion state recognition reaches 100%. This system will promote bionic vision development and application, paving the way for high-performance neuromorphic vision systems surpassing the human eye.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4117-y
Real-time, in situ imaging of hydrogen peroxide (H2O2), a key reactive oxygen species implicated in various diseases, remains challenging due to limitations of existing probes, such as short emission wavelengths and reliance on external excitation. To address these issues, we developed an H2O2-triggered near-infrared (NIR) chemiluminescence (CL) nanoprobe with aggregation-induced emission (AIE) characteristics for in vivo inflammation imaging and tumor theranostics. This nanoprobe, denoted as CPPO@TN NPs, was constructed by co-encapsulating a tailored AIE photosensitizer (TN) with strong NIR emission and high singlet oxygen (1O2) generation, a H2O2-responsive chemiluminescent substrate (CPPO), and soybean oil (as a retarder) within F-127 micelles. Upon encountering H2O2, the nanoprobe undergoes a persistent chemically initiated electron exchange luminescence (CIEEL) process that activates AIEgens, resulting in intense NIR chemiluminescence and sustained 1O2 production without the need for external irradiation. Leveraging this mechanism, CPPO@TN NPs achieved highly sensitive and specific imaging of drug-induced liver injury and peritonitis in murine models, with exceptional tissue penetration and signal-to-noise ratio. Furthermore, the nanoprobe facilitated effective self-luminescent imaging and photodynamic therapy of tumors, significantly inhibiting tumor growth in a 4T1 tumor-bearing mouse model. This platform provides an external light excitation-free theranostic strategy for H2O2-associated diseases.